| Message ID | 1452242773-18887-2-git-send-email-wenyou.yang@atmel.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
2016-01-08 17:46 GMT+09:00 Wenyou Yang <wenyou.yang@atmel.com>: > This patch adds new driver for Active-semi ACT8945A ActivePath > charger (part of ACT8945A MFD driver) providing power supply class > information to userspace. > > The driver is configured through DTS (battery and system related > settings) and sysfs entries (timers and input over-voltage threshold). > > Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> > --- > > Changes in v2: > 1./ Substitute of_property_read_bool() for of_get_property(). > 2./ Substitute devm_power_supply_register() for power_supply_register(). > 3./ Use module_platform_driver(), instead of subsys_initcall(). > 4./ Substitute MODULE_LICENSE("GPL") for MODULE_LICENSE("GPL v2"). > > drivers/power/Kconfig | 7 + > drivers/power/Makefile | 1 + > drivers/power/act8945a_charger.c | 386 ++++++++++++++++++++++++++++++++++++++ > 3 files changed, 394 insertions(+) > create mode 100644 drivers/power/act8945a_charger.c > > diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig > index 1ddd13c..ae75211 100644 > --- a/drivers/power/Kconfig > +++ b/drivers/power/Kconfig > @@ -75,6 +75,13 @@ config BATTERY_88PM860X > help > Say Y here to enable battery monitor for Marvell 88PM860x chip. > > +config BATTERY_ACT8945A > + tristate "Active-semi ACT8945A charger driver" > + depends on MFD_ACT8945A > + help > + Say Y here to enable support for power supply provided by > + Active-semi ActivePath ACT8945A charger. > + > config BATTERY_DS2760 > tristate "DS2760 battery driver (HP iPAQ & others)" > depends on W1 && W1_SLAVE_DS2760 > diff --git a/drivers/power/Makefile b/drivers/power/Makefile > index 0e4eab5..e46b75d 100644 > --- a/drivers/power/Makefile > +++ b/drivers/power/Makefile > @@ -17,6 +17,7 @@ obj-$(CONFIG_WM8350_POWER) += wm8350_power.o > obj-$(CONFIG_TEST_POWER) += test_power.o > > obj-$(CONFIG_BATTERY_88PM860X) += 88pm860x_battery.o > +obj-$(CONFIG_BATTERY_ACT8945A) += act8945a_charger.o > obj-$(CONFIG_BATTERY_DS2760) += ds2760_battery.o > obj-$(CONFIG_BATTERY_DS2780) += ds2780_battery.o > obj-$(CONFIG_BATTERY_DS2781) += ds2781_battery.o > diff --git a/drivers/power/act8945a_charger.c b/drivers/power/act8945a_charger.c > new file mode 100644 > index 0000000..fe9c19f > --- /dev/null > +++ b/drivers/power/act8945a_charger.c > @@ -0,0 +1,386 @@ > +/* > + * Power supply driver for the Active-semi ACT8945A PMIC > + * > + * Copyright (C) 2015 Atmel Corporation > + * Wenyou Yang <wenyou.yang@atmel.com> > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License as published by > + * the Free Software Foundation; either version 2 of the License, or > + * (at your option) any later version. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + */ > + > +#include <linux/module.h> > +#include <linux/mfd/act8945a.h> > +#include <linux/of.h> > +#include <linux/of_gpio.h> > +#include <linux/platform_device.h> > +#include <linux/power_supply.h> > +#include <linux/regmap.h> > + > +static const char *act8945a_charger_model = "ACT8945A"; > +static const char *act8945a_charger_manufacturer = "Active-semi"; > + > +/** > + * ACT8945A Charger Register Map > + */ > + > +/* 0x70: Reserved */ > +#define ACT8945A_APCH_CFG 0x71 > +#define ACT8945A_APCH_STATUS 0x78 > +#define ACT8945A_APCH_CTRL 0x79 > +#define ACT8945A_APCH_STATE 0x7A > + > +/* ACT8945A_APCH_CFG */ > +#define APCH_CFG_OVPSET (0x03 << 0) > +#define APCH_CFG_OVPSET_6V6 (0x0 << 0) > +#define APCH_CFG_OVPSET_7V (0x1 << 0) > +#define APCH_CFG_OVPSET_7V5 (0x2 << 0) > +#define APCH_CFG_OVPSET_8V (0x3 << 0) > +#define APCH_CFG_PRETIMO (0x03 << 2) > +#define APCH_CFG_PRETIMO_40_MIN (0x0 << 2) > +#define APCH_CFG_PRETIMO_60_MIN (0x1 << 2) > +#define APCH_CFG_PRETIMO_80_MIN (0x2 << 2) > +#define APCH_CFG_PRETIMO_DISABLED (0x3 << 2) > +#define APCH_CFG_TOTTIMO (0x03 << 4) > +#define APCH_CFG_TOTTIMO_3_HOUR (0x0 << 4) > +#define APCH_CFG_TOTTIMO_4_HOUR (0x1 << 4) > +#define APCH_CFG_TOTTIMO_5_HOUR (0x2 << 4) > +#define APCH_CFG_TOTTIMO_DISABLED (0x3 << 4) > +#define APCH_CFG_SUSCHG (0x01 << 7) > + > +#define APCH_STATUS_CHGDAT (0x01 << 0) > +#define APCH_STATUS_INDAT (0x01 << 1) > +#define APCH_STATUS_TEMPDAT (0x01 << 2) > +#define APCH_STATUS_TIMRDAT (0x01 << 3) > +#define APCH_STATUS_CHGSTAT (0x01 << 4) > +#define APCH_STATUS_INSTAT (0x01 << 5) > +#define APCH_STATUS_TEMPSTAT (0x01 << 6) > +#define APCH_STATUS_TIMRSTAT (0x01 << 7) > + > +#define APCH_CTRL_CHGEOCOUT (0x01 << 0) > +#define APCH_CTRL_INDIS (0x01 << 1) > +#define APCH_CTRL_TEMPOUT (0x01 << 2) > +#define APCH_CTRL_TIMRPRE (0x01 << 3) > +#define APCH_CTRL_CHGEOCIN (0x01 << 4) > +#define APCH_CTRL_INCON (0x01 << 5) > +#define APCH_CTRL_TEMPIN (0x01 << 6) > +#define APCH_CTRL_TIMRTOT (0x01 << 7) > + > +#define APCH_STATE_ACINSTAT (0x01 << 1) > +#define APCH_STATE_CSTATE (0x03 << 4) > +#define APCH_STATE_CSTATE_SHIFT 4 > +#define APCH_STATE_CSTATE_DISABLED 0x00 > +#define APCH_STATE_CSTATE_EOC 0x01 > +#define APCH_STATE_CSTATE_FAST 0x02 > +#define APCH_STATE_CSTATE_PRE 0x03 > + > +struct act8945a_charger { > + struct device *dev; > + struct act8945a_dev *act8945a_dev; > + struct power_supply *psy; > + > + u32 tolal_time_out; > + u32 pre_time_out; > + u32 input_voltage_threshold; > + bool battery_temperature; > + int chglev_pin; > + int chglev_value; > +}; > + > +static int act8945a_get_charger_state(struct regmap *regmap, int *val) > +{ > + int ret; > + unsigned int status, state; > + > + ret = regmap_read(regmap, ACT8945A_APCH_STATUS, &status); > + if (ret < 0) > + return ret; > + > + ret = regmap_read(regmap, ACT8945A_APCH_STATE, &state); > + if (ret < 0) > + return ret; > + > + state &= APCH_STATE_CSTATE; > + state >>= APCH_STATE_CSTATE_SHIFT; > + > + if (state == APCH_STATE_CSTATE_EOC) { > + if (status & APCH_STATUS_CHGDAT) > + *val = POWER_SUPPLY_STATUS_FULL; > + else > + *val = POWER_SUPPLY_STATUS_NOT_CHARGING; > + } else if ((state == APCH_STATE_CSTATE_FAST) || > + (state == APCH_STATE_CSTATE_PRE)) { > + *val = POWER_SUPPLY_STATUS_CHARGING; > + } else { > + *val = POWER_SUPPLY_STATUS_NOT_CHARGING; > + } > + > + return 0; > +} > + > +static int act8945a_get_charge_type(struct regmap *regmap, int *val) > +{ > + int ret; > + unsigned int state; > + > + ret = regmap_read(regmap, ACT8945A_APCH_STATE, &state); > + if (ret < 0) > + return ret; > + > + state &= APCH_STATE_CSTATE; > + state >>= APCH_STATE_CSTATE_SHIFT; > + > + switch (state) { > + case APCH_STATE_CSTATE_PRE: > + *val = POWER_SUPPLY_CHARGE_TYPE_TRICKLE; > + break; > + case APCH_STATE_CSTATE_FAST: > + *val = POWER_SUPPLY_CHARGE_TYPE_FAST; > + break; > + case APCH_STATE_CSTATE_EOC: > + case APCH_STATE_CSTATE_DISABLED: > + default: > + *val = POWER_SUPPLY_CHARGE_TYPE_NONE; > + } > + > + return 0; > +} > + > +static int act8945a_get_battery_health(struct act8945a_charger *charger, > + struct regmap *regmap, int *val) > +{ > + int ret; > + unsigned int status; > + > + ret = regmap_read(regmap, ACT8945A_APCH_STATUS, &status); > + if (ret < 0) > + return ret; > + > + if (charger->battery_temperature && !(status & APCH_STATUS_TEMPDAT)) > + *val = POWER_SUPPLY_HEALTH_OVERHEAT; > + else if (!(status & APCH_STATUS_INDAT)) > + *val = POWER_SUPPLY_HEALTH_OVERVOLTAGE; > + else if (status & APCH_STATUS_TIMRDAT) > + *val = POWER_SUPPLY_HEALTH_SAFETY_TIMER_EXPIRE; > + else > + *val = POWER_SUPPLY_HEALTH_GOOD; > + > + return 0; > +} > + > +static enum power_supply_property act8945a_charger_props[] = { > + POWER_SUPPLY_PROP_STATUS, > + POWER_SUPPLY_PROP_CHARGE_TYPE, > + POWER_SUPPLY_PROP_TECHNOLOGY, > + POWER_SUPPLY_PROP_HEALTH, > + POWER_SUPPLY_PROP_MODEL_NAME, > + POWER_SUPPLY_PROP_MANUFACTURER > +}; > + > +static int act8945a_charger_get_property(struct power_supply *psy, > + enum power_supply_property prop, > + union power_supply_propval *val) > +{ > + struct act8945a_charger *charger = power_supply_get_drvdata(psy); > + struct regmap *regmap = charger->act8945a_dev->regmap; > + int ret = 0; > + > + switch (prop) { > + case POWER_SUPPLY_PROP_STATUS: > + ret = act8945a_get_charger_state(regmap, &val->intval); > + break; > + case POWER_SUPPLY_PROP_CHARGE_TYPE: > + ret = act8945a_get_charge_type(regmap, &val->intval); > + break; > + case POWER_SUPPLY_PROP_TECHNOLOGY: > + val->intval = POWER_SUPPLY_TECHNOLOGY_LION; > + break; > + case POWER_SUPPLY_PROP_HEALTH: > + ret = act8945a_get_battery_health(charger, > + regmap, &val->intval); > + break; > + case POWER_SUPPLY_PROP_MODEL_NAME: > + val->strval = act8945a_charger_model; > + break; > + case POWER_SUPPLY_PROP_MANUFACTURER: > + val->strval = act8945a_charger_manufacturer; > + break; > + default: > + return -EINVAL; > + } > + > + return ret; > +} > + > +static const struct power_supply_desc act8945a_charger_desc = { > + .name = "act8945a-charger", > + .type = POWER_SUPPLY_TYPE_BATTERY, > + .get_property = act8945a_charger_get_property, > + .properties = act8945a_charger_props, > + .num_properties = ARRAY_SIZE(act8945a_charger_props), > +}; > + > +#define DEFAULT_TOTAL_TIME_OUT 3 > +#define DEFAULT_PRE_TIME_OUT 40 > +#define DEFAULT_INPUT_OVP_THRESHOLD 6600 > + > +static int act8945a_charger_parse_dt(struct device *dev, > + struct act8945a_charger *charger) > +{ > + struct device_node *np = dev->of_node; > + enum of_gpio_flags flags; > + > + if (!np) { > + dev_err(dev, "no charger of node\n"); > + return -EINVAL; > + } > + > + charger->chglev_pin = of_get_named_gpio_flags(np, > + "active-semi,chglev-gpio", 0, &flags); > + > + charger->chglev_value = (flags == OF_GPIO_ACTIVE_LOW) ? 0 : 1; > + > + charger->battery_temperature = of_property_read_bool(np, > + "active-semi,battery_temperature"); > + > + if (of_property_read_u32(np, "active-semi,input_voltage_threshold", > + &charger->input_voltage_threshold)) > + charger->input_voltage_threshold = DEFAULT_PRE_TIME_OUT; > + > + if (of_property_read_u32(np, "active-semi,precondition_timeout", > + &charger->pre_time_out)) > + charger->pre_time_out = DEFAULT_PRE_TIME_OUT; > + > + if (of_property_read_u32(np, "active-semi,total_timeout", > + &charger->tolal_time_out)) > + charger->tolal_time_out = DEFAULT_TOTAL_TIME_OUT; > + > + return 0; > +} > + > +static int act8945a_charger_config(struct act8945a_charger *charger) > +{ > + struct regmap *regmap = charger->act8945a_dev->regmap; > + u8 value = 0; > + > + if (gpio_is_valid(charger->chglev_pin)) > + gpio_set_value(charger->chglev_pin, charger->chglev_value); > + > + switch (charger->input_voltage_threshold) { > + case 8000: > + value |= APCH_CFG_OVPSET_8V; > + break; > + case 7500: > + value |= APCH_CFG_OVPSET_7V5; > + break; > + case 7000: > + value |= APCH_CFG_OVPSET_7V; > + break; > + case 6600: > + default: > + value |= APCH_CFG_OVPSET_6V6; > + break; > + } > + > + switch (charger->pre_time_out) { > + case 60: > + value |= APCH_CFG_PRETIMO_60_MIN; > + break; > + case 80: > + value |= APCH_CFG_PRETIMO_80_MIN; > + break; > + case 0: > + value |= APCH_CFG_PRETIMO_DISABLED; > + break; > + case 40: > + default: > + value |= APCH_CFG_PRETIMO_40_MIN; > + break; > + } > + > + switch (charger->tolal_time_out) { > + case 4: > + value |= APCH_CFG_TOTTIMO_4_HOUR; > + break; > + case 5: > + value |= APCH_CFG_TOTTIMO_5_HOUR; > + break; > + case 0: > + value |= APCH_CFG_TOTTIMO_DISABLED; > + break; > + case 3: > + default: > + value |= APCH_CFG_TOTTIMO_3_HOUR; > + break; > + } > + > + return regmap_write(regmap, ACT8945A_APCH_CFG, value); > +} > + > +static int act8945a_charger_probe(struct platform_device *pdev) > +{ > + struct act8945a_dev *act8945a_dev = dev_get_drvdata(pdev->dev.parent); > + struct act8945a_charger *charger; > + struct power_supply_config psy_cfg = {}; > + int ret; > + > + charger = devm_kzalloc(&pdev->dev, sizeof(*charger), GFP_KERNEL); > + if (!charger) > + return -ENOMEM; > + > + platform_set_drvdata(pdev, charger); > + > + charger->dev = &pdev->dev; > + charger->act8945a_dev = act8945a_dev; > + > + ret = act8945a_charger_parse_dt(&pdev->dev, charger); > + if (ret) > + return ret; > + > + ret = act8945a_charger_config(charger); > + if (ret) > + return ret; > + > + psy_cfg.of_node = pdev->dev.of_node; > + psy_cfg.drv_data = charger; > + > + charger->psy = devm_power_supply_register(&pdev->dev, > + &act8945a_charger_desc, > + &psy_cfg); > + if (IS_ERR(charger->psy)) { > + dev_err(act8945a_dev->dev, "failed to register power supply\n"); > + return PTR_ERR(charger->psy); > + } > + > + dev_info(act8945a_dev->dev, "charger driver registered\n"); > + > + return 0; > +} > + > +static int act8945a_charger_remove(struct platform_device *pdev) > +{ > + struct act8945a_charger *charger = platform_get_drvdata(pdev); > + > + power_supply_unregister(charger->psy); > The point of devm-like functions is to get rid of error and removal paths. This won't work... actually this should oops. Have you tested unbinding of driver? Best regards, Krzysztof
Hi Krzysztof, > -----Original Message----- > From: k.kozlowski.k@gmail.com [mailto:k.kozlowski.k@gmail.com] On Behalf Of > Krzysztof Kozlowski > Sent: 2016?1?8? 20:17 > To: Yang, Wenyou <Wenyou.Yang@atmel.com> > Cc: Sebastian Reichel <sre@kernel.org>; Dmitry Eremin-Solenikov > <dbaryshkov@gmail.com>; David Woodhouse <dwmw2@infradead.org>; Rob > Herring <robh+dt@kernel.org>; Pawel Moll <pawel.moll@arm.com>; Mark > Rutland <mark.rutland@arm.com>; Ian Campbell <ijc+devicetree@hellion.org.uk>; > Kumar Gala <galak@codeaurora.org>; Ferre, Nicolas > <Nicolas.FERRE@atmel.com>; linux-arm-kernel@lists.infradead.org; linux- > kernel@vger.kernel.org; linux-pm@vger.kernel.org > Subject: Re: [PATCH v2 1/2] power: act8945a: add charger driver for ACT8945A > > 2016-01-08 17:46 GMT+09:00 Wenyou Yang <wenyou.yang@atmel.com>: > > This patch adds new driver for Active-semi ACT8945A ActivePath charger > > (part of ACT8945A MFD driver) providing power supply class information > > to userspace. > > > > The driver is configured through DTS (battery and system related > > settings) and sysfs entries (timers and input over-voltage threshold). > > > > Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> > > --- > > > > Changes in v2: > > 1./ Substitute of_property_read_bool() for of_get_property(). > > 2./ Substitute devm_power_supply_register() for power_supply_register(). > > 3./ Use module_platform_driver(), instead of subsys_initcall(). > > 4./ Substitute MODULE_LICENSE("GPL") for MODULE_LICENSE("GPL v2"). > > > > drivers/power/Kconfig | 7 + > > drivers/power/Makefile | 1 + > > drivers/power/act8945a_charger.c | 386 > > ++++++++++++++++++++++++++++++++++++++ > > 3 files changed, 394 insertions(+) > > create mode 100644 drivers/power/act8945a_charger.c > > > > diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig index > > 1ddd13c..ae75211 100644 > > --- a/drivers/power/Kconfig > > +++ b/drivers/power/Kconfig > > @@ -75,6 +75,13 @@ config BATTERY_88PM860X > > help > > Say Y here to enable battery monitor for Marvell 88PM860x chip. > > > > +config BATTERY_ACT8945A > > + tristate "Active-semi ACT8945A charger driver" > > + depends on MFD_ACT8945A > > + help > > + Say Y here to enable support for power supply provided by > > + Active-semi ActivePath ACT8945A charger. > > + > > config BATTERY_DS2760 > > tristate "DS2760 battery driver (HP iPAQ & others)" > > depends on W1 && W1_SLAVE_DS2760 diff --git > > a/drivers/power/Makefile b/drivers/power/Makefile index > > 0e4eab5..e46b75d 100644 > > --- a/drivers/power/Makefile > > +++ b/drivers/power/Makefile > > @@ -17,6 +17,7 @@ obj-$(CONFIG_WM8350_POWER) += > wm8350_power.o > > obj-$(CONFIG_TEST_POWER) += test_power.o > > > > obj-$(CONFIG_BATTERY_88PM860X) += 88pm860x_battery.o > > +obj-$(CONFIG_BATTERY_ACT8945A) += act8945a_charger.o > > obj-$(CONFIG_BATTERY_DS2760) += ds2760_battery.o > > obj-$(CONFIG_BATTERY_DS2780) += ds2780_battery.o > > obj-$(CONFIG_BATTERY_DS2781) += ds2781_battery.o > > diff --git a/drivers/power/act8945a_charger.c > > b/drivers/power/act8945a_charger.c > > new file mode 100644 > > index 0000000..fe9c19f > > --- /dev/null > > +++ b/drivers/power/act8945a_charger.c > > @@ -0,0 +1,386 @@ > > +/* > > + * Power supply driver for the Active-semi ACT8945A PMIC > > + * > > + * Copyright (C) 2015 Atmel Corporation > > + * Wenyou Yang <wenyou.yang@atmel.com> > > + * > > + * This program is free software; you can redistribute it and/or > > +modify > > + * it under the terms of the GNU General Public License as published > > +by > > + * the Free Software Foundation; either version 2 of the License, or > > + * (at your option) any later version. > > + * > > + * This program is distributed in the hope that it will be useful, > > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See > the > > + * GNU General Public License for more details. > > + */ > > + > > +#include <linux/module.h> > > +#include <linux/mfd/act8945a.h> > > +#include <linux/of.h> > > +#include <linux/of_gpio.h> > > +#include <linux/platform_device.h> > > +#include <linux/power_supply.h> > > +#include <linux/regmap.h> > > + > > +static const char *act8945a_charger_model = "ACT8945A"; static const > > +char *act8945a_charger_manufacturer = "Active-semi"; > > + > > +/** > > + * ACT8945A Charger Register Map > > + */ > > + > > +/* 0x70: Reserved */ > > +#define ACT8945A_APCH_CFG 0x71 > > +#define ACT8945A_APCH_STATUS 0x78 > > +#define ACT8945A_APCH_CTRL 0x79 > > +#define ACT8945A_APCH_STATE 0x7A > > + > > +/* ACT8945A_APCH_CFG */ > > +#define APCH_CFG_OVPSET (0x03 << 0) > > +#define APCH_CFG_OVPSET_6V6 (0x0 << 0) > > +#define APCH_CFG_OVPSET_7V (0x1 << 0) > > +#define APCH_CFG_OVPSET_7V5 (0x2 << 0) > > +#define APCH_CFG_OVPSET_8V (0x3 << 0) > > +#define APCH_CFG_PRETIMO (0x03 << 2) > > +#define APCH_CFG_PRETIMO_40_MIN (0x0 << 2) > > +#define APCH_CFG_PRETIMO_60_MIN (0x1 << 2) > > +#define APCH_CFG_PRETIMO_80_MIN (0x2 << 2) > > +#define APCH_CFG_PRETIMO_DISABLED (0x3 << 2) > > +#define APCH_CFG_TOTTIMO (0x03 << 4) > > +#define APCH_CFG_TOTTIMO_3_HOUR (0x0 << 4) > > +#define APCH_CFG_TOTTIMO_4_HOUR (0x1 << 4) > > +#define APCH_CFG_TOTTIMO_5_HOUR (0x2 << 4) > > +#define APCH_CFG_TOTTIMO_DISABLED (0x3 << 4) > > +#define APCH_CFG_SUSCHG (0x01 << 7) > > + > > +#define APCH_STATUS_CHGDAT (0x01 << 0) > > +#define APCH_STATUS_INDAT (0x01 << 1) > > +#define APCH_STATUS_TEMPDAT (0x01 << 2) > > +#define APCH_STATUS_TIMRDAT (0x01 << 3) > > +#define APCH_STATUS_CHGSTAT (0x01 << 4) > > +#define APCH_STATUS_INSTAT (0x01 << 5) > > +#define APCH_STATUS_TEMPSTAT (0x01 << 6) > > +#define APCH_STATUS_TIMRSTAT (0x01 << 7) > > + > > +#define APCH_CTRL_CHGEOCOUT (0x01 << 0) > > +#define APCH_CTRL_INDIS (0x01 << 1) > > +#define APCH_CTRL_TEMPOUT (0x01 << 2) > > +#define APCH_CTRL_TIMRPRE (0x01 << 3) > > +#define APCH_CTRL_CHGEOCIN (0x01 << 4) > > +#define APCH_CTRL_INCON (0x01 << 5) > > +#define APCH_CTRL_TEMPIN (0x01 << 6) > > +#define APCH_CTRL_TIMRTOT (0x01 << 7) > > + > > +#define APCH_STATE_ACINSTAT (0x01 << 1) > > +#define APCH_STATE_CSTATE (0x03 << 4) > > +#define APCH_STATE_CSTATE_SHIFT 4 > > +#define APCH_STATE_CSTATE_DISABLED 0x00 > > +#define APCH_STATE_CSTATE_EOC 0x01 > > +#define APCH_STATE_CSTATE_FAST 0x02 > > +#define APCH_STATE_CSTATE_PRE 0x03 > > + > > +struct act8945a_charger { > > + struct device *dev; > > + struct act8945a_dev *act8945a_dev; > > + struct power_supply *psy; > > + > > + u32 tolal_time_out; > > + u32 pre_time_out; > > + u32 input_voltage_threshold; > > + bool battery_temperature; > > + int chglev_pin; > > + int chglev_value; > > +}; > > + > > +static int act8945a_get_charger_state(struct regmap *regmap, int > > +*val) { > > + int ret; > > + unsigned int status, state; > > + > > + ret = regmap_read(regmap, ACT8945A_APCH_STATUS, &status); > > + if (ret < 0) > > + return ret; > > + > > + ret = regmap_read(regmap, ACT8945A_APCH_STATE, &state); > > + if (ret < 0) > > + return ret; > > + > > + state &= APCH_STATE_CSTATE; > > + state >>= APCH_STATE_CSTATE_SHIFT; > > + > > + if (state == APCH_STATE_CSTATE_EOC) { > > + if (status & APCH_STATUS_CHGDAT) > > + *val = POWER_SUPPLY_STATUS_FULL; > > + else > > + *val = POWER_SUPPLY_STATUS_NOT_CHARGING; > > + } else if ((state == APCH_STATE_CSTATE_FAST) || > > + (state == APCH_STATE_CSTATE_PRE)) { > > + *val = POWER_SUPPLY_STATUS_CHARGING; > > + } else { > > + *val = POWER_SUPPLY_STATUS_NOT_CHARGING; > > + } > > + > > + return 0; > > +} > > + > > +static int act8945a_get_charge_type(struct regmap *regmap, int *val) > > +{ > > + int ret; > > + unsigned int state; > > + > > + ret = regmap_read(regmap, ACT8945A_APCH_STATE, &state); > > + if (ret < 0) > > + return ret; > > + > > + state &= APCH_STATE_CSTATE; > > + state >>= APCH_STATE_CSTATE_SHIFT; > > + > > + switch (state) { > > + case APCH_STATE_CSTATE_PRE: > > + *val = POWER_SUPPLY_CHARGE_TYPE_TRICKLE; > > + break; > > + case APCH_STATE_CSTATE_FAST: > > + *val = POWER_SUPPLY_CHARGE_TYPE_FAST; > > + break; > > + case APCH_STATE_CSTATE_EOC: > > + case APCH_STATE_CSTATE_DISABLED: > > + default: > > + *val = POWER_SUPPLY_CHARGE_TYPE_NONE; > > + } > > + > > + return 0; > > +} > > + > > +static int act8945a_get_battery_health(struct act8945a_charger *charger, > > + struct regmap *regmap, int *val) > > +{ > > + int ret; > > + unsigned int status; > > + > > + ret = regmap_read(regmap, ACT8945A_APCH_STATUS, &status); > > + if (ret < 0) > > + return ret; > > + > > + if (charger->battery_temperature && !(status & > APCH_STATUS_TEMPDAT)) > > + *val = POWER_SUPPLY_HEALTH_OVERHEAT; > > + else if (!(status & APCH_STATUS_INDAT)) > > + *val = POWER_SUPPLY_HEALTH_OVERVOLTAGE; > > + else if (status & APCH_STATUS_TIMRDAT) > > + *val = POWER_SUPPLY_HEALTH_SAFETY_TIMER_EXPIRE; > > + else > > + *val = POWER_SUPPLY_HEALTH_GOOD; > > + > > + return 0; > > +} > > + > > +static enum power_supply_property act8945a_charger_props[] = { > > + POWER_SUPPLY_PROP_STATUS, > > + POWER_SUPPLY_PROP_CHARGE_TYPE, > > + POWER_SUPPLY_PROP_TECHNOLOGY, > > + POWER_SUPPLY_PROP_HEALTH, > > + POWER_SUPPLY_PROP_MODEL_NAME, > > + POWER_SUPPLY_PROP_MANUFACTURER }; > > + > > +static int act8945a_charger_get_property(struct power_supply *psy, > > + enum power_supply_property prop, > > + union power_supply_propval *val) { > > + struct act8945a_charger *charger = power_supply_get_drvdata(psy); > > + struct regmap *regmap = charger->act8945a_dev->regmap; > > + int ret = 0; > > + > > + switch (prop) { > > + case POWER_SUPPLY_PROP_STATUS: > > + ret = act8945a_get_charger_state(regmap, &val->intval); > > + break; > > + case POWER_SUPPLY_PROP_CHARGE_TYPE: > > + ret = act8945a_get_charge_type(regmap, &val->intval); > > + break; > > + case POWER_SUPPLY_PROP_TECHNOLOGY: > > + val->intval = POWER_SUPPLY_TECHNOLOGY_LION; > > + break; > > + case POWER_SUPPLY_PROP_HEALTH: > > + ret = act8945a_get_battery_health(charger, > > + regmap, &val->intval); > > + break; > > + case POWER_SUPPLY_PROP_MODEL_NAME: > > + val->strval = act8945a_charger_model; > > + break; > > + case POWER_SUPPLY_PROP_MANUFACTURER: > > + val->strval = act8945a_charger_manufacturer; > > + break; > > + default: > > + return -EINVAL; > > + } > > + > > + return ret; > > +} > > + > > +static const struct power_supply_desc act8945a_charger_desc = { > > + .name = "act8945a-charger", > > + .type = POWER_SUPPLY_TYPE_BATTERY, > > + .get_property = act8945a_charger_get_property, > > + .properties = act8945a_charger_props, > > + .num_properties = ARRAY_SIZE(act8945a_charger_props), > > +}; > > + > > +#define DEFAULT_TOTAL_TIME_OUT 3 > > +#define DEFAULT_PRE_TIME_OUT 40 > > +#define DEFAULT_INPUT_OVP_THRESHOLD 6600 > > + > > +static int act8945a_charger_parse_dt(struct device *dev, > > + struct act8945a_charger *charger) > > +{ > > + struct device_node *np = dev->of_node; > > + enum of_gpio_flags flags; > > + > > + if (!np) { > > + dev_err(dev, "no charger of node\n"); > > + return -EINVAL; > > + } > > + > > + charger->chglev_pin = of_get_named_gpio_flags(np, > > + "active-semi,chglev-gpio", 0, &flags); > > + > > + charger->chglev_value = (flags == OF_GPIO_ACTIVE_LOW) ? 0 : 1; > > + > > + charger->battery_temperature = of_property_read_bool(np, > > + > > + "active-semi,battery_temperature"); > > + > > + if (of_property_read_u32(np, "active-semi,input_voltage_threshold", > > + &charger->input_voltage_threshold)) > > + charger->input_voltage_threshold = > > + DEFAULT_PRE_TIME_OUT; > > + > > + if (of_property_read_u32(np, "active-semi,precondition_timeout", > > + &charger->pre_time_out)) > > + charger->pre_time_out = DEFAULT_PRE_TIME_OUT; > > + > > + if (of_property_read_u32(np, "active-semi,total_timeout", > > + &charger->tolal_time_out)) > > + charger->tolal_time_out = DEFAULT_TOTAL_TIME_OUT; > > + > > + return 0; > > +} > > + > > +static int act8945a_charger_config(struct act8945a_charger *charger) > > +{ > > + struct regmap *regmap = charger->act8945a_dev->regmap; > > + u8 value = 0; > > + > > + if (gpio_is_valid(charger->chglev_pin)) > > + gpio_set_value(charger->chglev_pin, > > + charger->chglev_value); > > + > > + switch (charger->input_voltage_threshold) { > > + case 8000: > > + value |= APCH_CFG_OVPSET_8V; > > + break; > > + case 7500: > > + value |= APCH_CFG_OVPSET_7V5; > > + break; > > + case 7000: > > + value |= APCH_CFG_OVPSET_7V; > > + break; > > + case 6600: > > + default: > > + value |= APCH_CFG_OVPSET_6V6; > > + break; > > + } > > + > > + switch (charger->pre_time_out) { > > + case 60: > > + value |= APCH_CFG_PRETIMO_60_MIN; > > + break; > > + case 80: > > + value |= APCH_CFG_PRETIMO_80_MIN; > > + break; > > + case 0: > > + value |= APCH_CFG_PRETIMO_DISABLED; > > + break; > > + case 40: > > + default: > > + value |= APCH_CFG_PRETIMO_40_MIN; > > + break; > > + } > > + > > + switch (charger->tolal_time_out) { > > + case 4: > > + value |= APCH_CFG_TOTTIMO_4_HOUR; > > + break; > > + case 5: > > + value |= APCH_CFG_TOTTIMO_5_HOUR; > > + break; > > + case 0: > > + value |= APCH_CFG_TOTTIMO_DISABLED; > > + break; > > + case 3: > > + default: > > + value |= APCH_CFG_TOTTIMO_3_HOUR; > > + break; > > + } > > + > > + return regmap_write(regmap, ACT8945A_APCH_CFG, value); } > > + > > +static int act8945a_charger_probe(struct platform_device *pdev) { > > + struct act8945a_dev *act8945a_dev = dev_get_drvdata(pdev->dev.parent); > > + struct act8945a_charger *charger; > > + struct power_supply_config psy_cfg = {}; > > + int ret; > > + > > + charger = devm_kzalloc(&pdev->dev, sizeof(*charger), GFP_KERNEL); > > + if (!charger) > > + return -ENOMEM; > > + > > + platform_set_drvdata(pdev, charger); > > + > > + charger->dev = &pdev->dev; > > + charger->act8945a_dev = act8945a_dev; > > + > > + ret = act8945a_charger_parse_dt(&pdev->dev, charger); > > + if (ret) > > + return ret; > > + > > + ret = act8945a_charger_config(charger); > > + if (ret) > > + return ret; > > + > > + psy_cfg.of_node = pdev->dev.of_node; > > + psy_cfg.drv_data = charger; > > + > > + charger->psy = devm_power_supply_register(&pdev->dev, > > + &act8945a_charger_desc, > > + &psy_cfg); > > + if (IS_ERR(charger->psy)) { > > + dev_err(act8945a_dev->dev, "failed to register power supply\n"); > > + return PTR_ERR(charger->psy); > > + } > > + > > + dev_info(act8945a_dev->dev, "charger driver registered\n"); > > + > > + return 0; > > +} > > + > > +static int act8945a_charger_remove(struct platform_device *pdev) { > > + struct act8945a_charger *charger = platform_get_drvdata(pdev); > > + > > + power_supply_unregister(charger->psy); > > > > The point of devm-like functions is to get rid of error and removal paths. This > won't work... actually this should oops. Have you tested unbinding of driver? Sorry about it. I forgot do this test for v2. I will remove it in the next verion. > > Best regards, > Krzysztof Best Regards, Wenyou Yang
diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig index 1ddd13c..ae75211 100644 --- a/drivers/power/Kconfig +++ b/drivers/power/Kconfig @@ -75,6 +75,13 @@ config BATTERY_88PM860X help Say Y here to enable battery monitor for Marvell 88PM860x chip. +config BATTERY_ACT8945A + tristate "Active-semi ACT8945A charger driver" + depends on MFD_ACT8945A + help + Say Y here to enable support for power supply provided by + Active-semi ActivePath ACT8945A charger. + config BATTERY_DS2760 tristate "DS2760 battery driver (HP iPAQ & others)" depends on W1 && W1_SLAVE_DS2760 diff --git a/drivers/power/Makefile b/drivers/power/Makefile index 0e4eab5..e46b75d 100644 --- a/drivers/power/Makefile +++ b/drivers/power/Makefile @@ -17,6 +17,7 @@ obj-$(CONFIG_WM8350_POWER) += wm8350_power.o obj-$(CONFIG_TEST_POWER) += test_power.o obj-$(CONFIG_BATTERY_88PM860X) += 88pm860x_battery.o +obj-$(CONFIG_BATTERY_ACT8945A) += act8945a_charger.o obj-$(CONFIG_BATTERY_DS2760) += ds2760_battery.o obj-$(CONFIG_BATTERY_DS2780) += ds2780_battery.o obj-$(CONFIG_BATTERY_DS2781) += ds2781_battery.o diff --git a/drivers/power/act8945a_charger.c b/drivers/power/act8945a_charger.c new file mode 100644 index 0000000..fe9c19f --- /dev/null +++ b/drivers/power/act8945a_charger.c @@ -0,0 +1,386 @@ +/* + * Power supply driver for the Active-semi ACT8945A PMIC + * + * Copyright (C) 2015 Atmel Corporation + * Wenyou Yang <wenyou.yang@atmel.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/module.h> +#include <linux/mfd/act8945a.h> +#include <linux/of.h> +#include <linux/of_gpio.h> +#include <linux/platform_device.h> +#include <linux/power_supply.h> +#include <linux/regmap.h> + +static const char *act8945a_charger_model = "ACT8945A"; +static const char *act8945a_charger_manufacturer = "Active-semi"; + +/** + * ACT8945A Charger Register Map + */ + +/* 0x70: Reserved */ +#define ACT8945A_APCH_CFG 0x71 +#define ACT8945A_APCH_STATUS 0x78 +#define ACT8945A_APCH_CTRL 0x79 +#define ACT8945A_APCH_STATE 0x7A + +/* ACT8945A_APCH_CFG */ +#define APCH_CFG_OVPSET (0x03 << 0) +#define APCH_CFG_OVPSET_6V6 (0x0 << 0) +#define APCH_CFG_OVPSET_7V (0x1 << 0) +#define APCH_CFG_OVPSET_7V5 (0x2 << 0) +#define APCH_CFG_OVPSET_8V (0x3 << 0) +#define APCH_CFG_PRETIMO (0x03 << 2) +#define APCH_CFG_PRETIMO_40_MIN (0x0 << 2) +#define APCH_CFG_PRETIMO_60_MIN (0x1 << 2) +#define APCH_CFG_PRETIMO_80_MIN (0x2 << 2) +#define APCH_CFG_PRETIMO_DISABLED (0x3 << 2) +#define APCH_CFG_TOTTIMO (0x03 << 4) +#define APCH_CFG_TOTTIMO_3_HOUR (0x0 << 4) +#define APCH_CFG_TOTTIMO_4_HOUR (0x1 << 4) +#define APCH_CFG_TOTTIMO_5_HOUR (0x2 << 4) +#define APCH_CFG_TOTTIMO_DISABLED (0x3 << 4) +#define APCH_CFG_SUSCHG (0x01 << 7) + +#define APCH_STATUS_CHGDAT (0x01 << 0) +#define APCH_STATUS_INDAT (0x01 << 1) +#define APCH_STATUS_TEMPDAT (0x01 << 2) +#define APCH_STATUS_TIMRDAT (0x01 << 3) +#define APCH_STATUS_CHGSTAT (0x01 << 4) +#define APCH_STATUS_INSTAT (0x01 << 5) +#define APCH_STATUS_TEMPSTAT (0x01 << 6) +#define APCH_STATUS_TIMRSTAT (0x01 << 7) + +#define APCH_CTRL_CHGEOCOUT (0x01 << 0) +#define APCH_CTRL_INDIS (0x01 << 1) +#define APCH_CTRL_TEMPOUT (0x01 << 2) +#define APCH_CTRL_TIMRPRE (0x01 << 3) +#define APCH_CTRL_CHGEOCIN (0x01 << 4) +#define APCH_CTRL_INCON (0x01 << 5) +#define APCH_CTRL_TEMPIN (0x01 << 6) +#define APCH_CTRL_TIMRTOT (0x01 << 7) + +#define APCH_STATE_ACINSTAT (0x01 << 1) +#define APCH_STATE_CSTATE (0x03 << 4) +#define APCH_STATE_CSTATE_SHIFT 4 +#define APCH_STATE_CSTATE_DISABLED 0x00 +#define APCH_STATE_CSTATE_EOC 0x01 +#define APCH_STATE_CSTATE_FAST 0x02 +#define APCH_STATE_CSTATE_PRE 0x03 + +struct act8945a_charger { + struct device *dev; + struct act8945a_dev *act8945a_dev; + struct power_supply *psy; + + u32 tolal_time_out; + u32 pre_time_out; + u32 input_voltage_threshold; + bool battery_temperature; + int chglev_pin; + int chglev_value; +}; + +static int act8945a_get_charger_state(struct regmap *regmap, int *val) +{ + int ret; + unsigned int status, state; + + ret = regmap_read(regmap, ACT8945A_APCH_STATUS, &status); + if (ret < 0) + return ret; + + ret = regmap_read(regmap, ACT8945A_APCH_STATE, &state); + if (ret < 0) + return ret; + + state &= APCH_STATE_CSTATE; + state >>= APCH_STATE_CSTATE_SHIFT; + + if (state == APCH_STATE_CSTATE_EOC) { + if (status & APCH_STATUS_CHGDAT) + *val = POWER_SUPPLY_STATUS_FULL; + else + *val = POWER_SUPPLY_STATUS_NOT_CHARGING; + } else if ((state == APCH_STATE_CSTATE_FAST) || + (state == APCH_STATE_CSTATE_PRE)) { + *val = POWER_SUPPLY_STATUS_CHARGING; + } else { + *val = POWER_SUPPLY_STATUS_NOT_CHARGING; + } + + return 0; +} + +static int act8945a_get_charge_type(struct regmap *regmap, int *val) +{ + int ret; + unsigned int state; + + ret = regmap_read(regmap, ACT8945A_APCH_STATE, &state); + if (ret < 0) + return ret; + + state &= APCH_STATE_CSTATE; + state >>= APCH_STATE_CSTATE_SHIFT; + + switch (state) { + case APCH_STATE_CSTATE_PRE: + *val = POWER_SUPPLY_CHARGE_TYPE_TRICKLE; + break; + case APCH_STATE_CSTATE_FAST: + *val = POWER_SUPPLY_CHARGE_TYPE_FAST; + break; + case APCH_STATE_CSTATE_EOC: + case APCH_STATE_CSTATE_DISABLED: + default: + *val = POWER_SUPPLY_CHARGE_TYPE_NONE; + } + + return 0; +} + +static int act8945a_get_battery_health(struct act8945a_charger *charger, + struct regmap *regmap, int *val) +{ + int ret; + unsigned int status; + + ret = regmap_read(regmap, ACT8945A_APCH_STATUS, &status); + if (ret < 0) + return ret; + + if (charger->battery_temperature && !(status & APCH_STATUS_TEMPDAT)) + *val = POWER_SUPPLY_HEALTH_OVERHEAT; + else if (!(status & APCH_STATUS_INDAT)) + *val = POWER_SUPPLY_HEALTH_OVERVOLTAGE; + else if (status & APCH_STATUS_TIMRDAT) + *val = POWER_SUPPLY_HEALTH_SAFETY_TIMER_EXPIRE; + else + *val = POWER_SUPPLY_HEALTH_GOOD; + + return 0; +} + +static enum power_supply_property act8945a_charger_props[] = { + POWER_SUPPLY_PROP_STATUS, + POWER_SUPPLY_PROP_CHARGE_TYPE, + POWER_SUPPLY_PROP_TECHNOLOGY, + POWER_SUPPLY_PROP_HEALTH, + POWER_SUPPLY_PROP_MODEL_NAME, + POWER_SUPPLY_PROP_MANUFACTURER +}; + +static int act8945a_charger_get_property(struct power_supply *psy, + enum power_supply_property prop, + union power_supply_propval *val) +{ + struct act8945a_charger *charger = power_supply_get_drvdata(psy); + struct regmap *regmap = charger->act8945a_dev->regmap; + int ret = 0; + + switch (prop) { + case POWER_SUPPLY_PROP_STATUS: + ret = act8945a_get_charger_state(regmap, &val->intval); + break; + case POWER_SUPPLY_PROP_CHARGE_TYPE: + ret = act8945a_get_charge_type(regmap, &val->intval); + break; + case POWER_SUPPLY_PROP_TECHNOLOGY: + val->intval = POWER_SUPPLY_TECHNOLOGY_LION; + break; + case POWER_SUPPLY_PROP_HEALTH: + ret = act8945a_get_battery_health(charger, + regmap, &val->intval); + break; + case POWER_SUPPLY_PROP_MODEL_NAME: + val->strval = act8945a_charger_model; + break; + case POWER_SUPPLY_PROP_MANUFACTURER: + val->strval = act8945a_charger_manufacturer; + break; + default: + return -EINVAL; + } + + return ret; +} + +static const struct power_supply_desc act8945a_charger_desc = { + .name = "act8945a-charger", + .type = POWER_SUPPLY_TYPE_BATTERY, + .get_property = act8945a_charger_get_property, + .properties = act8945a_charger_props, + .num_properties = ARRAY_SIZE(act8945a_charger_props), +}; + +#define DEFAULT_TOTAL_TIME_OUT 3 +#define DEFAULT_PRE_TIME_OUT 40 +#define DEFAULT_INPUT_OVP_THRESHOLD 6600 + +static int act8945a_charger_parse_dt(struct device *dev, + struct act8945a_charger *charger) +{ + struct device_node *np = dev->of_node; + enum of_gpio_flags flags; + + if (!np) { + dev_err(dev, "no charger of node\n"); + return -EINVAL; + } + + charger->chglev_pin = of_get_named_gpio_flags(np, + "active-semi,chglev-gpio", 0, &flags); + + charger->chglev_value = (flags == OF_GPIO_ACTIVE_LOW) ? 0 : 1; + + charger->battery_temperature = of_property_read_bool(np, + "active-semi,battery_temperature"); + + if (of_property_read_u32(np, "active-semi,input_voltage_threshold", + &charger->input_voltage_threshold)) + charger->input_voltage_threshold = DEFAULT_PRE_TIME_OUT; + + if (of_property_read_u32(np, "active-semi,precondition_timeout", + &charger->pre_time_out)) + charger->pre_time_out = DEFAULT_PRE_TIME_OUT; + + if (of_property_read_u32(np, "active-semi,total_timeout", + &charger->tolal_time_out)) + charger->tolal_time_out = DEFAULT_TOTAL_TIME_OUT; + + return 0; +} + +static int act8945a_charger_config(struct act8945a_charger *charger) +{ + struct regmap *regmap = charger->act8945a_dev->regmap; + u8 value = 0; + + if (gpio_is_valid(charger->chglev_pin)) + gpio_set_value(charger->chglev_pin, charger->chglev_value); + + switch (charger->input_voltage_threshold) { + case 8000: + value |= APCH_CFG_OVPSET_8V; + break; + case 7500: + value |= APCH_CFG_OVPSET_7V5; + break; + case 7000: + value |= APCH_CFG_OVPSET_7V; + break; + case 6600: + default: + value |= APCH_CFG_OVPSET_6V6; + break; + } + + switch (charger->pre_time_out) { + case 60: + value |= APCH_CFG_PRETIMO_60_MIN; + break; + case 80: + value |= APCH_CFG_PRETIMO_80_MIN; + break; + case 0: + value |= APCH_CFG_PRETIMO_DISABLED; + break; + case 40: + default: + value |= APCH_CFG_PRETIMO_40_MIN; + break; + } + + switch (charger->tolal_time_out) { + case 4: + value |= APCH_CFG_TOTTIMO_4_HOUR; + break; + case 5: + value |= APCH_CFG_TOTTIMO_5_HOUR; + break; + case 0: + value |= APCH_CFG_TOTTIMO_DISABLED; + break; + case 3: + default: + value |= APCH_CFG_TOTTIMO_3_HOUR; + break; + } + + return regmap_write(regmap, ACT8945A_APCH_CFG, value); +} + +static int act8945a_charger_probe(struct platform_device *pdev) +{ + struct act8945a_dev *act8945a_dev = dev_get_drvdata(pdev->dev.parent); + struct act8945a_charger *charger; + struct power_supply_config psy_cfg = {}; + int ret; + + charger = devm_kzalloc(&pdev->dev, sizeof(*charger), GFP_KERNEL); + if (!charger) + return -ENOMEM; + + platform_set_drvdata(pdev, charger); + + charger->dev = &pdev->dev; + charger->act8945a_dev = act8945a_dev; + + ret = act8945a_charger_parse_dt(&pdev->dev, charger); + if (ret) + return ret; + + ret = act8945a_charger_config(charger); + if (ret) + return ret; + + psy_cfg.of_node = pdev->dev.of_node; + psy_cfg.drv_data = charger; + + charger->psy = devm_power_supply_register(&pdev->dev, + &act8945a_charger_desc, + &psy_cfg); + if (IS_ERR(charger->psy)) { + dev_err(act8945a_dev->dev, "failed to register power supply\n"); + return PTR_ERR(charger->psy); + } + + dev_info(act8945a_dev->dev, "charger driver registered\n"); + + return 0; +} + +static int act8945a_charger_remove(struct platform_device *pdev) +{ + struct act8945a_charger *charger = platform_get_drvdata(pdev); + + power_supply_unregister(charger->psy); + + return 0; +} + +static struct platform_driver act8945a_charger_driver = { + .driver = { + .name = "act8945a-charger", + }, + .probe = act8945a_charger_probe, + .remove = act8945a_charger_remove, +}; +module_platform_driver(act8945a_charger_driver); + +MODULE_DESCRIPTION("Active-semi ACT8945A ActivePath charger driver"); +MODULE_AUTHOR("Wenyou Yang <wenyou.yang@atmel.com>"); +MODULE_LICENSE("GPL");
This patch adds new driver for Active-semi ACT8945A ActivePath charger (part of ACT8945A MFD driver) providing power supply class information to userspace. The driver is configured through DTS (battery and system related settings) and sysfs entries (timers and input over-voltage threshold). Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> --- Changes in v2: 1./ Substitute of_property_read_bool() for of_get_property(). 2./ Substitute devm_power_supply_register() for power_supply_register(). 3./ Use module_platform_driver(), instead of subsys_initcall(). 4./ Substitute MODULE_LICENSE("GPL") for MODULE_LICENSE("GPL v2"). drivers/power/Kconfig | 7 + drivers/power/Makefile | 1 + drivers/power/act8945a_charger.c | 386 ++++++++++++++++++++++++++++++++++++++ 3 files changed, 394 insertions(+) create mode 100644 drivers/power/act8945a_charger.c