| Message ID | 1455059287-2500-1-git-send-email-Lijun.Pan@freescale.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Tue, Feb 09, 2016 at 05:08:07PM -0600, Lijun Pan wrote: > Add "snps,quirk-frame-length-adjustment" property to > USB3 node for erratum A009116. This property provides > value of GFLADJ_30MHZ for post silicon frame length > adjustment. > > Signed-off-by: Lijun Pan <Lijun.Pan@freescale.com> Applied, thanks.
On Tue, Feb 09, 2016 at 05:08:07PM -0600, Lijun Pan wrote: > Add "snps,quirk-frame-length-adjustment" property to > USB3 node for erratum A009116. This property provides > value of GFLADJ_30MHZ for post silicon frame length > adjustment. > > Signed-off-by: Lijun Pan <Lijun.Pan@freescale.com> > --- > arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi | 2 ++ > 1 file changed, 2 insertions(+) Forgot to mention that arm64 patches use a different subject prefix from ARM ones. I changed the patch subject to "arm64: dts: ..." when applying. Shawn > > diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi > index 6e9e033..fa506f5 100644 > --- a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi > +++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi > @@ -501,6 +501,7 @@ > reg = <0x0 0x3100000 0x0 0x10000>; > interrupts = <0 80 0x4>; /* Level high type */ > dr_mode = "host"; > + snps,quirk-frame-length-adjustment = <0x20>; > }; > > usb1: usb3@3110000 { > @@ -509,6 +510,7 @@ > reg = <0x0 0x3110000 0x0 0x10000>; > interrupts = <0 81 0x4>; /* Level high type */ > dr_mode = "host"; > + snps,quirk-frame-length-adjustment = <0x20>; > }; > > ccn@4000000 { > -- > 1.7.9.5 > >
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi index 6e9e033..fa506f5 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi @@ -501,6 +501,7 @@ reg = <0x0 0x3100000 0x0 0x10000>; interrupts = <0 80 0x4>; /* Level high type */ dr_mode = "host"; + snps,quirk-frame-length-adjustment = <0x20>; }; usb1: usb3@3110000 { @@ -509,6 +510,7 @@ reg = <0x0 0x3110000 0x0 0x10000>; interrupts = <0 81 0x4>; /* Level high type */ dr_mode = "host"; + snps,quirk-frame-length-adjustment = <0x20>; }; ccn@4000000 {
Add "snps,quirk-frame-length-adjustment" property to USB3 node for erratum A009116. This property provides value of GFLADJ_30MHZ for post silicon frame length adjustment. Signed-off-by: Lijun Pan <Lijun.Pan@freescale.com> --- arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi | 2 ++ 1 file changed, 2 insertions(+)