@@ -137,12 +137,12 @@
clock-output-names = "pll6d2";
};
- /* dummy clock until pll6 can be reused */
- pll8: pll8_clk {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <1>;
- clock-output-names = "pll8";
+ pll8: clk@c01c20044 {
+ #clock-cells = <1>;
+ compatible = "allwinner,sun6i-a31-pll6-clk";
+ reg = <0x01c20044 0x4>;
+ clocks = <&osc24M>;
+ clock-output-names = "pll8", "pll8x2";
};
cpu: cpu_clk@01c20050 {
@@ -243,7 +243,7 @@
#clock-cells = <1>;
compatible = "allwinner,sun4i-a10-mmc-clk";
reg = <0x01c20088 0x4>;
- clocks = <&osc24M>, <&pll6 0>, <&pll8>;
+ clocks = <&osc24M>, <&pll6 0>, <&pll8 0>;
clock-output-names = "mmc0",
"mmc0_output",
"mmc0_sample";
@@ -253,7 +253,7 @@
#clock-cells = <1>;
compatible = "allwinner,sun4i-a10-mmc-clk";
reg = <0x01c2008c 0x4>;
- clocks = <&osc24M>, <&pll6 0>, <&pll8>;
+ clocks = <&osc24M>, <&pll6 0>, <&pll8 0>;
clock-output-names = "mmc1",
"mmc1_output",
"mmc1_sample";
@@ -263,7 +263,7 @@
#clock-cells = <1>;
compatible = "allwinner,sun4i-a10-mmc-clk";
reg = <0x01c20090 0x4>;
- clocks = <&osc24M>, <&pll6 0>, <&pll8>;
+ clocks = <&osc24M>, <&pll6 0>, <&pll8 0>;
clock-output-names = "mmc2",
"mmc2_output",
"mmc2_sample";
Now that we can reuse the A31 PLL6 clock driver for clocks other then PLL6 itself, describe the PLL8 clock properly. Signed-off-by: Andre Przywara <andre.przywara@arm.com> --- arch/arm/boot/dts/sun8i-h3.dtsi | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-)