diff mbox

[RFC,v5,15/17] vfio/type1: also check IRQ remapping capability at msi domain

Message ID 1456856877-4817-16-git-send-email-eric.auger@linaro.org (mailing list archive)
State New, archived
Headers show

Commit Message

Eric Auger March 1, 2016, 6:27 p.m. UTC
On x86 IRQ remapping is abstracted by the IOMMU. On ARM this is abstracted
by the msi controller. vfio_safe_irq_domain allows to check whether
interrupts are "safe" for a given device. They are if the device does
not use MSI or if the device uses MSI and the msi-parent controller
supports IRQ remapping.

Then we check at group level if all devices have safe interrupts: if not,
we only allow the group to be attached if allow_unsafe_interrupts is set.

At this point ARM sMMU still advertises IOMMU_CAP_INTR_REMAP. This is
changed in next patch.

Signed-off-by: Eric Auger <eric.auger@linaro.org>

---
v3 -> v4:
- rename vfio_msi_parent_irq_remapping_capable into vfio_safe_irq_domain
  and irq_remapping into safe_irq_domains

v2 -> v3:
- protect vfio_msi_parent_irq_remapping_capable with
  CONFIG_GENERIC_MSI_IRQ_DOMAIN
---
 drivers/vfio/vfio_iommu_type1.c | 44 +++++++++++++++++++++++++++++++++++++++--
 1 file changed, 42 insertions(+), 2 deletions(-)
diff mbox

Patch

diff --git a/drivers/vfio/vfio_iommu_type1.c b/drivers/vfio/vfio_iommu_type1.c
index 4e01ebe..88a40f1 100644
--- a/drivers/vfio/vfio_iommu_type1.c
+++ b/drivers/vfio/vfio_iommu_type1.c
@@ -37,6 +37,8 @@ 
 #include <linux/vfio.h>
 #include <linux/workqueue.h>
 #include <linux/dma-reserved-iommu.h>
+#include <linux/irqdomain.h>
+#include <linux/msi.h>
 
 #define DRIVER_VERSION  "0.2"
 #define DRIVER_AUTHOR   "Alex Williamson <alex.williamson@redhat.com>"
@@ -788,6 +790,33 @@  static int vfio_bus_type(struct device *dev, void *data)
 	return 0;
 }
 
+/**
+ * vfio_safe_irq_domain: returns whether the irq domain
+ * the device is attached to is safe with respect to MSI isolation.
+ * If the irq domain is not an MSI domain, we return it is safe.
+ *
+ * @dev: device handle
+ * @data: unused
+ * returns 0 if the irq domain is safe, -1 if not.
+ */
+static int vfio_safe_irq_domain(struct device *dev, void *data)
+{
+#ifdef CONFIG_GENERIC_MSI_IRQ_DOMAIN
+	struct irq_domain *domain;
+	struct msi_domain_info *info;
+
+	domain = dev_get_msi_domain(dev);
+	if (!domain)
+		return 0;
+
+	info = msi_get_domain_info(domain);
+
+	if (!(info->flags & MSI_FLAG_IRQ_REMAPPING))
+		return -1;
+#endif
+	return 0;
+}
+
 static int vfio_iommu_replay(struct vfio_iommu *iommu,
 			     struct vfio_domain *domain)
 {
@@ -882,7 +911,7 @@  static int vfio_iommu_type1_attach_group(void *iommu_data,
 	struct vfio_group *group, *g;
 	struct vfio_domain *domain, *d;
 	struct bus_type *bus = NULL;
-	int ret;
+	int ret, safe_irq_domains;
 
 	mutex_lock(&iommu->lock);
 
@@ -905,6 +934,13 @@  static int vfio_iommu_type1_attach_group(void *iommu_data,
 
 	group->iommu_group = iommu_group;
 
+	/*
+	 * Determine if all the devices of the group have a safe irq domain
+	 * with respect to MSI isolation
+	 */
+	safe_irq_domains = !iommu_group_for_each_dev(iommu_group, &bus,
+				       vfio_safe_irq_domain);
+
 	/* Determine bus_type in order to allocate a domain */
 	ret = iommu_group_for_each_dev(iommu_group, &bus, vfio_bus_type);
 	if (ret)
@@ -932,8 +968,12 @@  static int vfio_iommu_type1_attach_group(void *iommu_data,
 	INIT_LIST_HEAD(&domain->group_list);
 	list_add(&group->next, &domain->group_list);
 
+	/*
+	 * to advertise safe interrupts either the IOMMU or the MSI controllers
+	 * must support IRQ remapping/interrupt translation
+	 */
 	if (!allow_unsafe_interrupts &&
-	    !iommu_capable(bus, IOMMU_CAP_INTR_REMAP)) {
+	    (!iommu_capable(bus, IOMMU_CAP_INTR_REMAP) && !safe_irq_domains)) {
 		pr_warn("%s: No interrupt remapping support.  Use the module param \"allow_unsafe_interrupts\" to enable VFIO IOMMU support on this platform\n",
 		       __func__);
 		ret = -EPERM;