diff mbox

[09/17] dt-bindings: Add PLX Technology OXNAS Standard Clocks bindings

Message ID 1457005210-18485-10-git-send-email-narmstrong@baylibre.com (mailing list archive)
State New, archived
Headers show

Commit Message

Neil Armstrong March 3, 2016, 11:40 a.m. UTC 
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 .../devicetree/bindings/clock/plxtech,stdclk.txt   | 24 ++++++++++++++++++++++
 1 file changed, 24 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/plxtech,stdclk.txt
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/clock/plxtech,stdclk.txt b/Documentation/devicetree/bindings/clock/plxtech,stdclk.txt
new file mode 100644
index 0000000..46465c6
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/plxtech,stdclk.txt
@@ -0,0 +1,24 @@ 
+PLX Technology OXNAS SoC Family Standard Clocks
+================================================
+
+Please also refer to clock-bindings.txt in this directory for common clock
+bindings usage.
+
+Required properties:
+- compatible: Should be "plxtech,ox810se-stdclk" or "plxtech,nas782x-stdclk"
+- #clock-cells: 1, see below
+
+Parent node should have the following properties :
+- compatible: Should be "plxtech,ox810se-sys-ctrl", "syscon", "simple-mfd"
+
+example:
+
+sys: sys-ctrl@000000 {
+	compatible = "plxtech,ox810se-sys-ctrl", "syscon", "simple-mfd";
+	reg = <0x000000 0x100000>;
+
+	stdclk: stdclk {
+		compatible = "plxtech,ox810se-stdclk", "plxtech,nas782x-stdclk";
+		#reset-cells = <1>;
+	};
+};