| Message ID | 1457192097-32538-4-git-send-email-linux@baker-net.org.uk (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi Adam, On sam., mars 05 2016, Adam Baker <linux@baker-net.org.uk> wrote: > Add an entry for the hardware monitoring MCU > > Signed-off-by: Adam Baker <linux@baker-net.org.uk> Applied on mvebu/dt, I only changed the tropic to "ARM: dts: kirkwood: Add the hardware monitor to the NSA320 device tree" as know requested by the arm-soc maintainer. Thanks, Gregory > --- > This patch is unchanged from the version Gregory CLEMENT said > he would apply once the hwmon maintainers accept 2/3 > --- > arch/arm/boot/dts/kirkwood-nsa320.dts | 13 +++++++++++-- > 1 file changed, 11 insertions(+), 2 deletions(-) > > diff --git a/arch/arm/boot/dts/kirkwood-nsa320.dts b/arch/arm/boot/dts/kirkwood-nsa320.dts > index 24f686d..2a935e9 100644 > --- a/arch/arm/boot/dts/kirkwood-nsa320.dts > +++ b/arch/arm/boot/dts/kirkwood-nsa320.dts > @@ -193,10 +193,19 @@ > }; > }; > > + hwmon { > + compatible = "zyxel,nsa320-mcu"; > + pinctrl-0 = <&pmx_mcu_data &pmx_mcu_clk &pmx_mcu_act>; > + pinctrl-names = "default"; > + > + data-gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; > + clk-gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>; > + act-gpios = <&gpio0 17 GPIO_ACTIVE_LOW>; > + }; > + > /* The following pins are currently not assigned to a driver, > some of them should be configured as inputs. > - pinctrl-0 = <&pmx_mcu_data &pmx_mcu_clk &pmx_mcu_act > - &pmx_htp &pmx_vid_b1 > + pinctrl-0 = <&pmx_htp &pmx_vid_b1 > &pmx_power_resume_data &pmx_power_resume_clk>; */ > }; > > -- > 2.1.4 >
diff --git a/arch/arm/boot/dts/kirkwood-nsa320.dts b/arch/arm/boot/dts/kirkwood-nsa320.dts index 24f686d..2a935e9 100644 --- a/arch/arm/boot/dts/kirkwood-nsa320.dts +++ b/arch/arm/boot/dts/kirkwood-nsa320.dts @@ -193,10 +193,19 @@ }; }; + hwmon { + compatible = "zyxel,nsa320-mcu"; + pinctrl-0 = <&pmx_mcu_data &pmx_mcu_clk &pmx_mcu_act>; + pinctrl-names = "default"; + + data-gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; + clk-gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>; + act-gpios = <&gpio0 17 GPIO_ACTIVE_LOW>; + }; + /* The following pins are currently not assigned to a driver, some of them should be configured as inputs. - pinctrl-0 = <&pmx_mcu_data &pmx_mcu_clk &pmx_mcu_act - &pmx_htp &pmx_vid_b1 + pinctrl-0 = <&pmx_htp &pmx_vid_b1 &pmx_power_resume_data &pmx_power_resume_clk>; */ };
Add an entry for the hardware monitoring MCU Signed-off-by: Adam Baker <linux@baker-net.org.uk> --- This patch is unchanged from the version Gregory CLEMENT said he would apply once the hwmon maintainers accept 2/3 --- arch/arm/boot/dts/kirkwood-nsa320.dts | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-)