@@ -1,6 +1,7 @@
#include <dt-bindings/pinctrl/bcm2835.h>
#include <dt-bindings/clock/bcm2835.h>
#include <dt-bindings/clock/bcm2835-aux.h>
+#include <dt-bindings/interrupt-controller/bcm2835.h>
#include "skeleton.dtsi"
/* This include file covers the common peripherals and configuration between
@@ -25,7 +26,10 @@
timer@7e003000 {
compatible = "brcm,bcm2835-system-timer";
reg = <0x7e003000 0x1000>;
- interrupts = <1 0>, <1 1>, <1 2>, <1 3>;
+ interrupts = <BCM2835_INT_TIMER0>,
+ <BCM2835_INT_TIMER1>,
+ <BCM2835_INT_TIMER2>,
+ <BCM2835_INT_TIMER3>;
/* This could be a reference to BCM2835_CLOCK_TIMER,
* but we don't have the driver using the common clock
* support yet.
@@ -36,19 +40,19 @@
dma: dma@7e007000 {
compatible = "brcm,bcm2835-dma";
reg = <0x7e007000 0xf00>;
- interrupts = <1 16>,
- <1 17>,
- <1 18>,
- <1 19>,
- <1 20>,
- <1 21>,
- <1 22>,
- <1 23>,
- <1 24>,
- <1 25>,
- <1 26>,
- <1 27>,
- <1 28>;
+ interrupts = <BCM2835_INT_DMA0>,
+ <BCM2835_INT_DMA1>,
+ <BCM2835_INT_DMA2>,
+ <BCM2835_INT_DMA3>,
+ <BCM2835_INT_DMA4>,
+ <BCM2835_INT_DMA5>,
+ <BCM2835_INT_DMA6>,
+ <BCM2835_INT_DMA7>,
+ <BCM2835_INT_DMA8>,
+ <BCM2835_INT_DMA9>,
+ <BCM2835_INT_DMA10>,
+ <BCM2835_INT_DMA11_12_13_14>,
+ <BCM2835_INT_DMA_ALL>;
#dma-cells = <1>;
brcm,dma-channel-mask = <0x7f35>;
@@ -85,7 +89,7 @@
mailbox: mailbox@7e00b800 {
compatible = "brcm,bcm2835-mbox";
reg = <0x7e00b880 0x40>;
- interrupts = <0 1>;
+ interrupts = <BCM2835_INT_ARM_MAILBOX>;
#mbox-cells = <0>;
};
@@ -103,7 +107,10 @@
* So, a bank0 interrupt shows up on 17, 20, and
* a bank1 interrupt shows up on 18, 19, 20!
*/
- interrupts = <2 17>, <2 18>, <2 19>, <2 20>;
+ interrupts = <BCM2835_INT_GPIO0>,
+ <BCM2835_INT_GPIO1>,
+ <BCM2835_INT_GPIO2>,
+ <BCM2835_INT_GPIO3>;
gpio-controller;
#gpio-cells = <2>;
@@ -115,7 +122,7 @@
uart0: serial@7e201000 {
compatible = "brcm,bcm2835-pl011", "arm,pl011", "arm,primecell";
reg = <0x7e201000 0x1000>;
- interrupts = <2 25>;
+ interrupts = <BCM2835_INT_UART>;
clocks = <&clocks BCM2835_CLOCK_UART>,
<&clocks BCM2835_CLOCK_VPU>;
clock-names = "uartclk", "apb_pclk";
@@ -136,7 +143,7 @@
spi: spi@7e204000 {
compatible = "brcm,bcm2835-spi";
reg = <0x7e204000 0x1000>;
- interrupts = <2 22>;
+ interrupts = <BCM2835_INT_SPI>;
clocks = <&clocks BCM2835_CLOCK_VPU>;
#address-cells = <1>;
#size-cells = <0>;
@@ -146,7 +153,7 @@
i2c0: i2c@7e205000 {
compatible = "brcm,bcm2835-i2c";
reg = <0x7e205000 0x1000>;
- interrupts = <2 21>;
+ interrupts = <BCM2835_INT_I2C>;
clocks = <&clocks BCM2835_CLOCK_VPU>;
#address-cells = <1>;
#size-cells = <0>;
@@ -163,7 +170,7 @@
uart1: serial@7e215040 {
compatible = "brcm,bcm2835-aux-uart";
reg = <0x7e215040 0x40>;
- interrupts = <1 29>;
+ interrupts = <BCM2835_INT_AUX_UART>;
clocks = <&aux BCM2835_AUX_CLOCK_UART>;
status = "disabled";
};
@@ -171,7 +178,7 @@
spi1: spi@7e215080 {
compatible = "brcm,bcm2835-aux-spi";
reg = <0x7e215080 0x40>;
- interrupts = <1 29>;
+ interrupts = <BCM2835_INT_AUX_SPI1>;
clocks = <&aux BCM2835_AUX_CLOCK_SPI1>;
#address-cells = <1>;
#size-cells = <0>;
@@ -181,7 +188,7 @@
spi2: spi@7e2150c0 {
compatible = "brcm,bcm2835-aux-spi";
reg = <0x7e2150c0 0x40>;
- interrupts = <1 29>;
+ interrupts = <BCM2835_INT_AUX_SPI2>;
clocks = <&aux BCM2835_AUX_CLOCK_SPI2>;
#address-cells = <1>;
#size-cells = <0>;
@@ -201,7 +208,7 @@
sdhci: sdhci@7e300000 {
compatible = "brcm,bcm2835-sdhci";
reg = <0x7e300000 0x100>;
- interrupts = <2 30>;
+ interrupts = <BCM2835_INT_ARSANSDIO>;
clocks = <&clocks BCM2835_CLOCK_EMMC>;
status = "disabled";
};
@@ -209,7 +216,7 @@
i2c1: i2c@7e804000 {
compatible = "brcm,bcm2835-i2c";
reg = <0x7e804000 0x1000>;
- interrupts = <2 21>;
+ interrupts = <BCM2835_INT_I2C>;
clocks = <&clocks BCM2835_CLOCK_VPU>;
#address-cells = <1>;
#size-cells = <0>;
@@ -219,7 +226,7 @@
i2c2: i2c@7e805000 {
compatible = "brcm,bcm2835-i2c";
reg = <0x7e805000 0x1000>;
- interrupts = <2 21>;
+ interrupts = <BCM2835_INT_I2C>;
clocks = <&clocks BCM2835_CLOCK_VPU>;
#address-cells = <1>;
#size-cells = <0>;
@@ -229,7 +236,7 @@
usb: usb@7e980000 {
compatible = "brcm,bcm2835-usb";
reg = <0x7e980000 0x10000>;
- interrupts = <1 9>;
+ interrupts = <BCM2835_INT_USB>;
};
};