diff mbox

[v3,4/9] net: arc: trivial: cleanup the emac driver

Message ID 1457942520-12859-5-git-send-email-wxt@rock-chips.com (mailing list archive)
State New, archived
Headers show

Commit Message

Caesar Wang March 14, 2016, 8:01 a.m. UTC
This patch will make the driver more readability

The emac has the error and warnings if you run
'scripts/checkpatch.pl -f --subjective xxx' to check.

Let's clean up such trivial details.

Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Cc: Jiri Kosina <trivial@kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Alexander Kochetkov <al.kochet@gmail.com>
Cc: netdev@vger.kernel.org

---

Changes in v3:
- Add the Cc people.

Changes in v2:
- As the robot notice the build error since overflow in implicit
  constant conversion.

 drivers/net/ethernet/arc/emac.h          | 54 +++++++++++++++++---------------
 drivers/net/ethernet/arc/emac_main.c     | 35 ++++++++++-----------
 drivers/net/ethernet/arc/emac_mdio.c     |  2 +-
 drivers/net/ethernet/arc/emac_rockchip.c | 41 +++++++++++++++++-------
 4 files changed, 75 insertions(+), 57 deletions(-)
diff mbox

Patch

diff --git a/drivers/net/ethernet/arc/emac.h b/drivers/net/ethernet/arc/emac.h
index 1a40403..ca562bc 100644
--- a/drivers/net/ethernet/arc/emac.h
+++ b/drivers/net/ethernet/arc/emac.h
@@ -14,36 +14,36 @@ 
 #include <linux/clk.h>
 
 /* STATUS and ENABLE Register bit masks */
-#define TXINT_MASK	(1<<0)	/* Transmit interrupt */
-#define RXINT_MASK	(1<<1)	/* Receive interrupt */
-#define ERR_MASK	(1<<2)	/* Error interrupt */
-#define TXCH_MASK	(1<<3)	/* Transmit chaining error interrupt */
-#define MSER_MASK	(1<<4)	/* Missed packet counter error */
-#define RXCR_MASK	(1<<8)	/* RXCRCERR counter rolled over  */
-#define RXFR_MASK	(1<<9)	/* RXFRAMEERR counter rolled over */
-#define RXFL_MASK	(1<<10)	/* RXOFLOWERR counter rolled over */
-#define MDIO_MASK	(1<<12)	/* MDIO complete interrupt */
-#define TXPL_MASK	(1<<31)	/* Force polling of BD by EMAC */
+#define TXINT_MASK	(1 << 0)	/* Transmit interrupt */
+#define RXINT_MASK	(1 << 1)	/* Receive interrupt */
+#define ERR_MASK	(1 << 2)	/* Error interrupt */
+#define TXCH_MASK	(1 << 3)	/* Transmit chaining error interrupt */
+#define MSER_MASK	(1 << 4)	/* Missed packet counter error */
+#define RXCR_MASK	(1 << 8)	/* RXCRCERR counter rolled over  */
+#define RXFR_MASK	(1 << 9)	/* RXFRAMEERR counter rolled over */
+#define RXFL_MASK	(1 << 10)	/* RXOFLOWERR counter rolled over */
+#define MDIO_MASK	(1 << 12)	/* MDIO complete interrupt */
+#define TXPL_MASK	(1 << 31)	/* Force polling of BD by EMAC */
 
 /* CONTROL Register bit masks */
-#define EN_MASK		(1<<0)	/* VMAC enable */
-#define TXRN_MASK	(1<<3)	/* TX enable */
-#define RXRN_MASK	(1<<4)	/* RX enable */
-#define DSBC_MASK	(1<<8)	/* Disable receive broadcast */
-#define ENFL_MASK	(1<<10)	/* Enable Full-duplex */
-#define PROM_MASK	(1<<11)	/* Promiscuous mode */
+#define EN_MASK		(1 << 0)	/* VMAC enable */
+#define TXRN_MASK	(1 << 3)	/* TX enable */
+#define RXRN_MASK	(1 << 4)	/* RX enable */
+#define DSBC_MASK	(1 << 8)	/* Disable receive broadcast */
+#define ENFL_MASK	(1 << 10)	/* Enable Full-duplex */
+#define PROM_MASK	(1 << 11)	/* Promiscuous mode */
 
 /* Buffer descriptor INFO bit masks */
-#define OWN_MASK	(1<<31)	/* 0-CPU owns buffer, 1-EMAC owns buffer */
-#define FIRST_MASK	(1<<16)	/* First buffer in chain */
-#define LAST_MASK	(1<<17)	/* Last buffer in chain */
+#define OWN_MASK	(1 << 31)	/* 0-CPU or 1-EMAC owns buffer */
+#define FIRST_MASK	(1 << 16)	/* First buffer in chain */
+#define LAST_MASK	(1 << 17)	/* Last buffer in chain */
 #define LEN_MASK	0x000007FF	/* last 11 bits */
-#define CRLS		(1<<21)
-#define DEFR		(1<<22)
-#define DROP		(1<<23)
-#define RTRY		(1<<24)
-#define LTCL		(1<<28)
-#define UFLO		(1<<29)
+#define CRLS		(1 << 21)
+#define DEFR		(1 << 22)
+#define DROP		(1 << 23)
+#define RTRY		(1 << 24)
+#define LTCL		(1 << 28)
+#define UFLO		(1 << 29)
 
 #define FOR_EMAC	OWN_MASK
 #define FOR_CPU		0
@@ -66,7 +66,7 @@  enum {
 	R_MDIO,
 };
 
-#define TX_TIMEOUT		(400*HZ/1000)	/* Transmission timeout */
+#define TX_TIMEOUT		(400 * HZ / 1000) /* Transmission timeout */
 
 #define ARC_EMAC_NAPI_WEIGHT	40		/* Workload for NAPI */
 
@@ -196,6 +196,7 @@  static inline unsigned int arc_reg_get(struct arc_emac_priv *priv, int reg)
 static inline void arc_reg_or(struct arc_emac_priv *priv, int reg, int mask)
 {
 	unsigned int value = arc_reg_get(priv, reg);
+
 	arc_reg_set(priv, reg, value | mask);
 }
 
@@ -211,6 +212,7 @@  static inline void arc_reg_or(struct arc_emac_priv *priv, int reg, int mask)
 static inline void arc_reg_clr(struct arc_emac_priv *priv, int reg, int mask)
 {
 	unsigned int value = arc_reg_get(priv, reg);
+
 	arc_reg_set(priv, reg, value & ~mask);
 }
 
diff --git a/drivers/net/ethernet/arc/emac_main.c b/drivers/net/ethernet/arc/emac_main.c
index 6446af1..a3a9392 100644
--- a/drivers/net/ethernet/arc/emac_main.c
+++ b/drivers/net/ethernet/arc/emac_main.c
@@ -26,7 +26,6 @@ 
 
 #include "emac.h"
 
-
 /**
  * arc_emac_tx_avail - Return the number of available slots in the tx ring.
  * @priv: Pointer to ARC EMAC private data structure.
@@ -66,7 +65,7 @@  static void arc_emac_adjust_link(struct net_device *ndev)
 	if (priv->duplex != phy_dev->duplex) {
 		reg = arc_reg_get(priv, R_CTRL);
 
-		if (DUPLEX_FULL == phy_dev->duplex)
+		if (phy_dev->duplex == DUPLEX_FULL)
 			reg |= ENFL_MASK;
 		else
 			reg &= ~ENFL_MASK;
@@ -466,9 +465,9 @@  static int arc_emac_open(struct net_device *ndev)
 
 	/* Set CONTROL */
 	arc_reg_set(priv, R_CTRL,
-		     (RX_BD_NUM << 24) |	/* RX BD table length */
-		     (TX_BD_NUM << 16) |	/* TX BD table length */
-		     TXRN_MASK | RXRN_MASK);
+		    (RX_BD_NUM << 24) |	/* RX BD table length */
+		    (TX_BD_NUM << 16) |	/* TX BD table length */
+		    TXRN_MASK | RXRN_MASK);
 
 	napi_enable(&priv->napi);
 
@@ -533,8 +532,10 @@  static void arc_free_tx_queue(struct net_device *ndev)
 		struct buffer_state *tx_buff = &priv->tx_buff[i];
 
 		if (tx_buff->skb) {
-			dma_unmap_single(&ndev->dev, dma_unmap_addr(tx_buff, addr),
-					 dma_unmap_len(tx_buff, len), DMA_TO_DEVICE);
+			dma_unmap_single(&ndev->dev,
+					 dma_unmap_addr(tx_buff, addr),
+					 dma_unmap_len(tx_buff, len),
+					 DMA_TO_DEVICE);
 
 			/* return the sk_buff to system */
 			dev_kfree_skb_irq(tx_buff->skb);
@@ -562,8 +563,10 @@  static void arc_free_rx_queue(struct net_device *ndev)
 		struct buffer_state *rx_buff = &priv->rx_buff[i];
 
 		if (rx_buff->skb) {
-			dma_unmap_single(&ndev->dev, dma_unmap_addr(rx_buff, addr),
-					dma_unmap_len(rx_buff, len), DMA_FROM_DEVICE);
+			dma_unmap_single(&ndev->dev,
+					 dma_unmap_addr(rx_buff, addr),
+					 dma_unmap_len(rx_buff, len),
+					 DMA_FROM_DEVICE);
 
 			/* return the sk_buff to system */
 			dev_kfree_skb_irq(rx_buff->skb);
@@ -717,8 +720,8 @@  static void arc_emac_set_address_internal(struct net_device *ndev)
 	struct arc_emac_priv *priv = netdev_priv(ndev);
 	unsigned int addr_low, addr_hi;
 
-	addr_low = le32_to_cpu(*(__le32 *) &ndev->dev_addr[0]);
-	addr_hi = le16_to_cpu(*(__le16 *) &ndev->dev_addr[4]);
+	addr_low = le32_to_cpu(*(__le32 *)&ndev->dev_addr[0]);
+	addr_hi = le16_to_cpu(*(__le16 *)&ndev->dev_addr[4]);
 
 	arc_reg_set(priv, R_ADDRL, addr_low);
 	arc_reg_set(priv, R_ADDRH, addr_hi);
@@ -774,7 +777,6 @@  int arc_emac_probe(struct net_device *ndev, int interface)
 	unsigned int id, clock_frequency, irq;
 	int err;
 
-
 	/* Get PHY from device tree */
 	phy_node = of_parse_phandle(dev->of_node, "phy", 0);
 	if (!phy_node) {
@@ -796,7 +798,6 @@  int arc_emac_probe(struct net_device *ndev, int interface)
 		return -ENODEV;
 	}
 
-
 	ndev->netdev_ops = &arc_emac_netdev_ops;
 	ndev->ethtool_ops = &arc_emac_ethtool_ops;
 	ndev->watchdog_timeo = TX_TIMEOUT;
@@ -807,9 +808,9 @@  int arc_emac_probe(struct net_device *ndev, int interface)
 	priv->dev = dev;
 
 	priv->regs = devm_ioremap_resource(dev, &res_regs);
-	if (IS_ERR(priv->regs)) {
+	if (IS_ERR(priv->regs))
 		return PTR_ERR(priv->regs);
-	}
+
 	dev_dbg(dev, "Registers base address is 0x%p\n", priv->regs);
 
 	if (priv->clk) {
@@ -930,10 +931,8 @@  int arc_emac_remove(struct net_device *ndev)
 	unregister_netdev(ndev);
 	netif_napi_del(&priv->napi);
 
-	if (!IS_ERR(priv->clk)) {
+	if (!IS_ERR(priv->clk))
 		clk_disable_unprepare(priv->clk);
-	}
-
 
 	return 0;
 }
diff --git a/drivers/net/ethernet/arc/emac_mdio.c b/drivers/net/ethernet/arc/emac_mdio.c
index caf7042..16419f5 100644
--- a/drivers/net/ethernet/arc/emac_mdio.c
+++ b/drivers/net/ethernet/arc/emac_mdio.c
@@ -94,7 +94,7 @@  static int arc_mdio_write(struct mii_bus *bus, int phy_addr,
 		phy_addr, reg_num, value);
 
 	arc_reg_set(priv, R_MDIO,
-		     0x50020000 | (phy_addr << 23) | (reg_num << 18) | value);
+		    0x50020000 | (phy_addr << 23) | (reg_num << 18) | value);
 
 	return arc_mdio_complete_wait(priv);
 }
diff --git a/drivers/net/ethernet/arc/emac_rockchip.c b/drivers/net/ethernet/arc/emac_rockchip.c
index 85e821c..e278e3d 100644
--- a/drivers/net/ethernet/arc/emac_rockchip.c
+++ b/drivers/net/ethernet/arc/emac_rockchip.c
@@ -50,7 +50,7 @@  static void emac_rockchip_set_mac_speed(void *priv, unsigned int speed)
 	u32 data;
 	int err = 0;
 
-	switch(speed) {
+	switch (speed) {
 	case 10:
 		data = (1 << (speed_offset + 16)) | (0 << speed_offset);
 		break;
@@ -83,9 +83,18 @@  static const struct emac_rockchip_soc_data emac_rk3188_emac_data = {
 };
 
 static const struct of_device_id emac_rockchip_dt_ids[] = {
-	{ .compatible = "rockchip,rk3036-emac", .data = &emac_rk3036_emac_data },
-	{ .compatible = "rockchip,rk3066-emac", .data = &emac_rk3066_emac_data },
-	{ .compatible = "rockchip,rk3188-emac", .data = &emac_rk3188_emac_data },
+	{
+		.compatible = "rockchip,rk3036-emac",
+		.data = &emac_rk3036_emac_data,
+	},
+	{
+		.compatible = "rockchip,rk3066-emac",
+		.data = &emac_rk3066_emac_data,
+	},
+	{
+		.compatible = "rockchip,rk3188-emac",
+		.data = &emac_rk3188_emac_data,
+	},
 	{ /* Sentinel */ }
 };
 
@@ -123,9 +132,11 @@  static int emac_rockchip_probe(struct platform_device *pdev)
 		goto out_netdev;
 	}
 
-	priv->grf = syscon_regmap_lookup_by_phandle(dev->of_node, "rockchip,grf");
+	priv->grf = syscon_regmap_lookup_by_phandle(dev->of_node,
+						    "rockchip,grf");
 	if (IS_ERR(priv->grf)) {
-		dev_err(dev, "failed to retrieve global register file (%ld)\n", PTR_ERR(priv->grf));
+		dev_err(dev, "failed to retrieve global register file (%ld)\n",
+			PTR_ERR(priv->grf));
 		err = PTR_ERR(priv->grf);
 		goto out_netdev;
 	}
@@ -135,14 +146,16 @@  static int emac_rockchip_probe(struct platform_device *pdev)
 
 	priv->emac.clk = devm_clk_get(dev, "hclk");
 	if (IS_ERR(priv->emac.clk)) {
-		dev_err(dev, "failed to retrieve host clock (%ld)\n", PTR_ERR(priv->emac.clk));
+		dev_err(dev, "failed to retrieve host clock (%ld)\n",
+			PTR_ERR(priv->emac.clk));
 		err = PTR_ERR(priv->emac.clk);
 		goto out_netdev;
 	}
 
 	priv->refclk = devm_clk_get(dev, "macref");
 	if (IS_ERR(priv->refclk)) {
-		dev_err(dev, "failed to retrieve reference clock (%ld)\n", PTR_ERR(priv->refclk));
+		dev_err(dev, "failed to retrieve reference clock (%ld)\n",
+			PTR_ERR(priv->refclk));
 		err = PTR_ERR(priv->refclk);
 		goto out_netdev;
 	}
@@ -179,19 +192,22 @@  static int emac_rockchip_probe(struct platform_device *pdev)
 
 	err = regmap_write(priv->grf, priv->soc_data->grf_offset, data);
 	if (err) {
-		dev_err(dev, "unable to apply initial settings to grf (%d)\n", err);
+		dev_err(dev, "unable to apply initial settings to grf (%d)\n",
+			err);
 		goto out_regulator_disable;
 	}
 
 	/* RMII interface needs always a rate of 50MHz */
 	err = clk_set_rate(priv->refclk, 50000000);
 	if (err)
-		dev_err(dev, "failed to change reference clock rate (%d)\n", err);
+		dev_err(dev,
+			"failed to change reference clock rate (%d)\n", err);
 
 	if (priv->soc_data->need_div_macclk) {
 		priv->macclk = devm_clk_get(dev, "macclk");
 		if (IS_ERR(priv->macclk)) {
-			dev_err(dev, "failed to retrieve mac clock (%ld)\n", PTR_ERR(priv->macclk));
+			dev_err(dev, "failed to retrieve mac clock (%ld)\n",
+				PTR_ERR(priv->macclk));
 			err = PTR_ERR(priv->macclk);
 			goto out_regulator_disable;
 		}
@@ -205,7 +221,8 @@  static int emac_rockchip_probe(struct platform_device *pdev)
 		/* RMII TX/RX needs always a rate of 25MHz */
 		err = clk_set_rate(priv->macclk, 25000000);
 		if (err)
-			dev_err(dev, "failed to change mac clock rate (%d)\n", err);
+			dev_err(dev,
+				"failed to change mac clock rate (%d)\n", err);
 	}
 
 	err = arc_emac_probe(ndev, interface);