Message ID | 1459277192-10942-2-git-send-email-simran.rai@broadcom.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
On Tue, Mar 29, 2016 at 11:46:30AM -0700, Simran Rai wrote: > From: Simran Rai <ssimran@broadcom.com> > > Add bindings for audio driver in Broadcom Cygnus. > > Signed-off-by: Lori Hikichi <lhikichi@broadcom.com> > Signed-off-by: Simran Rai <ssimran@broadcom.com> > Reviewed-by: Ray Jui <rjui@broadcom.com> > Reviewed-by: Scott Branden <sbranden@broadcom.com> > Signed-off-by: Simran Rai <simran.rai@broadcom.com> > --- > .../bindings/sound/brcm,cygnus-audio.txt | 67 ++++++++++++++++++++ > 1 file changed, 67 insertions(+) > create mode 100644 Documentation/devicetree/bindings/sound/brcm,cygnus-audio.txt I acked v3 of this already. Did something change? If not, please add acks when sending new versions. If things did change, explain that here. And this v5 is not a resend if you didn't already send out v5 before.
Hi Rob, On Thu, Mar 31, 2016 at 7:13 AM, Rob Herring <robh@kernel.org> wrote: > On Tue, Mar 29, 2016 at 11:46:30AM -0700, Simran Rai wrote: >> From: Simran Rai <ssimran@broadcom.com> >> >> Add bindings for audio driver in Broadcom Cygnus. >> >> Signed-off-by: Lori Hikichi <lhikichi@broadcom.com> >> Signed-off-by: Simran Rai <ssimran@broadcom.com> >> Reviewed-by: Ray Jui <rjui@broadcom.com> >> Reviewed-by: Scott Branden <sbranden@broadcom.com> >> Signed-off-by: Simran Rai <simran.rai@broadcom.com> >> --- >> .../bindings/sound/brcm,cygnus-audio.txt | 67 ++++++++++++++++++++ >> 1 file changed, 67 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/sound/brcm,cygnus-audio.txt > > I acked v3 of this already. Did something change? If not, please add > acks when sending new versions. If things did change, explain that here. There was a change made in v4 that introduced assigned-clocks, assigned-clock-parents, and assigned-clock-rates, to allow initial configuration of default parent clock and its frequency. > > And this v5 is not a resend if you didn't already send out v5 before. I had sent out v5 on March 01 but looks like it did not make it to through. Yesterday I sent out another patch (v6) to address Mark's comments. Can you please ack PATCH v6. Thanks, Simran
On Thu, Mar 31, 2016 at 11:14:53AM -0700, Simran Rai wrote: > There was a change made in v4 that introduced assigned-clocks, > assigned-clock-parents, and assigned-clock-rates, to allow initial > configuration of > default parent clock and its frequency. ...all of which are standard clock binding properties.
diff --git a/Documentation/devicetree/bindings/sound/brcm,cygnus-audio.txt b/Documentation/devicetree/bindings/sound/brcm,cygnus-audio.txt new file mode 100644 index 0000000..b139e66 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/brcm,cygnus-audio.txt @@ -0,0 +1,67 @@ +BROADCOM Cygnus Audio I2S/TDM/SPDIF controller + +Required properties: + - compatible : "brcm,cygnus-audio" + - #address-cells: 32bit valued, 1 cell. + - #size-cells: 32bit valued, 0 cell. + - reg : Should contain audio registers location and length + - reg-names: names of the registers listed in "reg" property + Valid names are "aud" and "i2s_in". "aud" contains a + set of DMA, I2S_OUT and SPDIF registers. "i2s_in" contains + a set of I2S_IN registers. + - clocks: PLL and leaf clocks used by audio ports + - assigned-clocks: PLL and leaf clocks + - assigned-clock-parents: parent clocks of the assigned clocks + (usually the PLL) + - assigned-clock-rates: List of clock frequencies of the + assigned clocks + - clock-names: names of 3 leaf clocks used by audio ports + Valid names are "ch0_audio", "ch1_audio", "ch2_audio" + - interrupts: audio DMA interrupt number + +SSP Subnode properties: +- reg: The index of ssp port interface to use + Valid value are 0, 1, 2, or 3 (for spdif) + +Example: + cygnus_audio: audio@180ae000 { + compatible = "brcm,cygnus-audio"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x180ae000 0xafd>, <0x180aec00 0x1f8>; + reg-names = "aud", "i2s_in"; + clocks = <&audiopll BCM_CYGNUS_AUDIOPLL_CH0>, + <&audiopll BCM_CYGNUS_AUDIOPLL_CH1>, + <&audiopll BCM_CYGNUS_AUDIOPLL_CH2>; + assigned-clocks = <&audiopll BCM_CYGNUS_AUDIOPLL>, + <&audiopll BCM_CYGNUS_AUDIOPLL_CH0>, + <&audiopll BCM_CYGNUS_AUDIOPLL_CH1>, + <&audiopll BCM_CYGNUS_AUDIOPLL_CH2>; + assigned-clock-parents = <&audiopll BCM_CYGNUS_AUDIOPLL>; + assigned-clock-rates = <1769470191>, + <0>, + <0>, + <0>; + clock-names = "ch0_audio", "ch1_audio", "ch2_audio"; + interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; + + ssp0: ssp_port@0 { + reg = <0>; + status = "okay"; + }; + + ssp1: ssp_port@1 { + reg = <1>; + status = "disabled"; + }; + + ssp2: ssp_port@2 { + reg = <2>; + status = "disabled"; + }; + + spdif: spdif_port@3 { + reg = <3>; + status = "disabled"; + }; + };