diff mbox

arm: dts: imx6q-ba16: Disable pwm2 by default

Message ID 1459545570-16390-1-git-send-email-akshay.bhat@timesys.com (mailing list archive)
State New, archived
Headers show

Commit Message

Akshay Bhat April 1, 2016, 9:19 p.m. UTC 
From: Justin Waters <justin.waters@timesys.com>

pwm2 is provided on the BA16 Q7 module, but is not used on any
of the current configurations. However, future platforms may
utilize this device, so we are simply disabling the node rather
than removing it completely.

Signed-off-by: Justin Waters <justin.waters@timeys.com>
Signed-off-by: Akshay Bhat <akshay.bhat@timesys.com>
---
 arch/arm/boot/dts/imx6q-ba16.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Comments

Shawn Guo April 12, 2016, 2:59 a.m. UTC | #1 
On Fri, Apr 01, 2016 at 05:19:30PM -0400, Akshay Bhat wrote:
> From: Justin Waters <justin.waters@timesys.com>
> 
> pwm2 is provided on the BA16 Q7 module, but is not used on any
> of the current configurations. However, future platforms may
> utilize this device, so we are simply disabling the node rather
> than removing it completely.
> 
> Signed-off-by: Justin Waters <justin.waters@timeys.com>
> Signed-off-by: Akshay Bhat <akshay.bhat@timesys.com>

Changed the lowercase 'arm' to 'ARM' in subject and applied the patch.

Shawn

> ---
>  arch/arm/boot/dts/imx6q-ba16.dtsi | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/arm/boot/dts/imx6q-ba16.dtsi b/arch/arm/boot/dts/imx6q-ba16.dtsi
> index fcc7b50..3f33a2a 100644
> --- a/arch/arm/boot/dts/imx6q-ba16.dtsi
> +++ b/arch/arm/boot/dts/imx6q-ba16.dtsi
> @@ -337,7 +337,7 @@
>  &pwm2 {
>  	pinctrl-names = "default";
>  	pinctrl-0 = <&pinctrl_pwm2>;
> -	status = "okay";
> +	status = "disabled";
>  };
>  
>  &sata {
> -- 
> 2.8.0
> 
>
diff mbox

Patch

diff --git a/arch/arm/boot/dts/imx6q-ba16.dtsi b/arch/arm/boot/dts/imx6q-ba16.dtsi
index fcc7b50..3f33a2a 100644
--- a/arch/arm/boot/dts/imx6q-ba16.dtsi
+++ b/arch/arm/boot/dts/imx6q-ba16.dtsi
@@ -337,7 +337,7 @@ 
 &pwm2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm2>;
-	status = "okay";
+	status = "disabled";
 };
 
 &sata {