@@ -8,8 +8,12 @@ target devices. It can be configured to have one channel or two channels.
If configured as two channels, one is to transmit to the device and another
is to receive from the device.
+Xilinx AXI CDMA engine, it does transfers between memory-mapped source
+address and a memory-mapped destination address.
+
Required properties:
-- compatible: Should be "xlnx,axi-vdma-1.00.a" or "xlnx,axi-dma-1.00.a"
+- compatible: Should be "xlnx,axi-vdma-1.00.a" or "xlnx,axi-dma-1.00.a" or
+ "xlnx,axi-cdma-1.00.a""
- #dma-cells: Should be <1>, see "dmas" property below
- reg: Should contain VDMA registers location and length.
- xlnx,num-fstores: Should be the number of framebuffers as configured in h/w.
@@ -80,6 +84,18 @@ axi_dma_0: axidma@40400000 {
} ;
} ;
+axi_cdma_0: axicdma@7e200000 {
+ compatible = "xlnx,axi-cdma-1.00.a";
+ #dma-cells = <1>;
+ reg = < 0x7e200000 0x10000 >;
+ xlnx,addrwidth = <0x20>;
+ dma-channel@7e200000 {
+ compatible = "xlnx,axi-dma-mm2s-channel";
+ interrupts = < 0 55 4 >;
+ xlnx,datawidth = <0x40>;
+ } ;
+} ;
+
* DMA client
Required properties:
This patch updates the device-tree binding doc for adding support for AXI CDMA. Signed-off-by: Kedareswara rao Appana <appanad@xilinx.com> --- Changes for v2: ---> Modified commit message as suggested by Vinod. ---> Moved the patch to forward in the series as suggested by vinod. .../devicetree/bindings/dma/xilinx/xilinx_vdma.txt | 18 +++++++++++++++++- 1 file changed, 17 insertions(+), 1 deletion(-)