diff mbox

[v2,net-next,13/13] dts: hisi: update hns dst for separating dsaf dev support

Message ID 1461402317-136499-14-git-send-email-Yisen.Zhuang@huawei.com (mailing list archive)
State New, archived
Headers show

Commit Message

Yisen.Zhuang(Zhuangyuzeng) April 23, 2016, 9:05 a.m. UTC
Because debug dsaf port was separated from service dsaf port, this patch
updates the related configurations of hns dts, changes it to match with
the new binding files. This also removes enet nodes which don't exist in
d02 board.

Signed-off-by: Yisen Zhuang <yisen.zhuang@huawei.com>
---
 arch/arm64/boot/dts/hisilicon/hip05_hns.dtsi | 72 ++++++++++++----------------
 1 file changed, 30 insertions(+), 42 deletions(-)
diff mbox

Patch

diff --git a/arch/arm64/boot/dts/hisilicon/hip05_hns.dtsi b/arch/arm64/boot/dts/hisilicon/hip05_hns.dtsi
index 933cba3..058cb78 100644
--- a/arch/arm64/boot/dts/hisilicon/hip05_hns.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hip05_hns.dtsi
@@ -28,13 +28,13 @@  soc0: soc@000000000 {
 		mode = "6port-16rss";
 		interrupt-parent = <&mbigen_dsa>;
 
-		reg = <0x0 0xC0000000 0x0 0x420000
-		       0x0 0xC2000000 0x0 0x300000
-		       0x0 0xc5000000 0x0 0x890000
+		reg = <0x0 0xc5000000 0x0 0x890000
 		       0x0 0xc7000000 0x0 0x60000
 		       >;
 
-		phy-handle = <0 0 0 0 &soc0_phy0 &soc0_phy1 0 0>;
+		reg-names = "ppe-base","dsaf-base";
+		subctrl-syscon = <&dsaf_subctrl>;
+		reset-field-offset = <0>;
 		interrupts = <
 			/* [14] ge fifo err 8 / xge 6**/
 			149 0x4 150 0x4 151 0x4 152 0x4
@@ -122,12 +122,31 @@  soc0: soc@000000000 {
 		buf-size = <4096>;
 		desc-num = <1024>;
 		dma-coherent;
+
+		port@0 {
+			port-id = <0>;
+			serdes-syscon = <&serdes_ctrl0>;
+		};
+		port@1 {
+			port-id = <1>;
+			serdes-syscon = <&serdes_ctrl0>;
+		};
+		port@4 {
+			port-id = <4>;
+			phy-handle = <&soc0_phy0>;
+			serdes-syscon = <&serdes_ctrl1>;
+		};
+		port@5 {
+			port-id = <5>;
+			phy-handle = <&soc0_phy1>;
+			serdes-syscon = <&serdes_ctrl1>;
+		};
 	};
 
 	eth0: ethernet@0{
 		compatible = "hisilicon,hns-nic-v1";
 		ae-handle = <&dsaf0>;
-		port-id = <0>;
+		port-idx-in-ae = <0>;
 		local-mac-address = [00 00 00 01 00 58];
 		status = "disabled";
 		dma-coherent;
@@ -135,56 +154,25 @@  soc0: soc@000000000 {
 	eth1: ethernet@1{
 		compatible = "hisilicon,hns-nic-v1";
 		ae-handle = <&dsaf0>;
-		port-id = <1>;
+		port-idx-in-ae = <1>;
+		local-mac-address = [00 00 00 01 00 59];
 		status = "disabled";
 		dma-coherent;
 	};
-	eth2: ethernet@2{
+	eth2: ethernet@4{
 		compatible = "hisilicon,hns-nic-v1";
 		ae-handle = <&dsaf0>;
-		port-id = <2>;
+		port-idx-in-ae = <4>;
 		local-mac-address = [00 00 00 01 00 5a];
 		status = "disabled";
 		dma-coherent;
 	};
-	eth3: ethernet@3{
+	eth3: ethernet@5{
 		compatible = "hisilicon,hns-nic-v1";
 		ae-handle = <&dsaf0>;
-		port-id = <3>;
+		port-idx-in-ae = <5>;
 		local-mac-address = [00 00 00 01 00 5b];
 		status = "disabled";
 		dma-coherent;
 	};
-	eth4: ethernet@4{
-		compatible = "hisilicon,hns-nic-v1";
-		ae-handle = <&dsaf0>;
-		port-id = <4>;
-		local-mac-address = [00 00 00 01 00 5c];
-		status = "disabled";
-		dma-coherent;
-	};
-	eth5: ethernet@5{
-		compatible = "hisilicon,hns-nic-v1";
-		ae-handle = <&dsaf0>;
-		port-id = <5>;
-		local-mac-address = [00 00 00 01 00 5d];
-		status = "disabled";
-		dma-coherent;
-	};
-	eth6: ethernet@6{
-		compatible = "hisilicon,hns-nic-v1";
-		ae-handle = <&dsaf0>;
-		port-id = <6>;
-		local-mac-address = [00 00 00 01 00 5e];
-		status = "disabled";
-		dma-coherent;
-	};
-	eth7: ethernet@7{
-		compatible = "hisilicon,hns-nic-v1";
-		ae-handle = <&dsaf0>;
-		port-id = <7>;
-		local-mac-address = [00 00 00 01 00 5f];
-		status = "disabled";
-		dma-coherent;
-	};
 };