@@ -72,17 +72,23 @@
spi-flash@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "n25q128a13";
- reg = <0>; /* Chip select 0 */
+ compatible = "jedec,spi-nor";
+ reg = <0>;
spi-max-frequency = <10000000>;
- partition@0 {
- label = "U-Boot";
- reg = <0 0x200000>;
- };
- partition@400000 {
- label = "Filesystem";
- reg = <0x200000 0xce0000>;
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "U-Boot";
+ reg = <0 0x200000>;
+ };
+ partition@400000 {
+ label = "Filesystem";
+ reg = <0x200000 0xce0000>;
+ };
};
};
};
This commit slightly improves the description of the SPI flash connected to the SPI controller of the Armada 7040, by: - Using the more generic "jedec,spi-nor" compatible string, which lets the driver auto-detect the exact SPI flash type. - Removing the silly comment about the Chip Select, since reg = <0> is explicit enough. - Switching to the new Device Tree binding to describe flash partitions. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> --- arch/arm64/boot/dts/marvell/armada-7040-db.dts | 24 +++++++++++++++--------- 1 file changed, 15 insertions(+), 9 deletions(-)