| Message ID | 1461765620-6833-3-git-send-email-k.kozlowski@samsung.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hello On 04/27/2016 10:00 AM, Krzysztof Kozlowski wrote: > Odroid X/X2/U3 schematics say that SD card vmmc regulator > (LDO21/TFLASH) operates on 2.8 V. Mainline U-Boot uses that value as > well. 2.8 V is common on Exynos-based boards. Additionally use some > descriptive name for this regulator. > > Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> > Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Best regards,
diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi index 34a5b3daced0..260601d2f72f 100644 --- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi +++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi @@ -341,9 +341,9 @@ }; ldo21_reg: LDO21 { - regulator-name = "LDO21_3.3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; + regulator-name = "TFLASH_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; regulator-boot-on; };
Odroid X/X2/U3 schematics say that SD card vmmc regulator (LDO21/TFLASH) operates on 2.8 V. Mainline U-Boot uses that value as well. 2.8 V is common on Exynos-based boards. Additionally use some descriptive name for this regulator. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> --- Changes since v1: 1. None --- arch/arm/boot/dts/exynos4412-odroid-common.dtsi | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)