| Message ID | 1461770872-26510-1-git-send-email-fabio.estevam@nxp.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 04/27/2016 05:27 PM, Fabio Estevam wrote: > mtdparts is passed from command line, so there is no need to have a > default partitioning in device-tree. > > Suggested-by: Marek Vasut <marex@denx.de> > Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Acked-by: Marek Vasut <marex@denx.de> Thanks for doing this :) > --- > Changes since v1: > - Remove all partition nodes > > arch/arm/boot/dts/imx28-m28.dtsi | 26 -------------------------- > 1 file changed, 26 deletions(-) > > diff --git a/arch/arm/boot/dts/imx28-m28.dtsi b/arch/arm/boot/dts/imx28-m28.dtsi > index 759cc56..6cebaa6 100644 > --- a/arch/arm/boot/dts/imx28-m28.dtsi > +++ b/arch/arm/boot/dts/imx28-m28.dtsi > @@ -27,32 +27,6 @@ > pinctrl-names = "default"; > pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>; > status = "okay"; > - > - partition@0 { > - label = "bootloader"; > - reg = <0x00000000 0x00300000>; > - read-only; > - }; > - > - partition@1 { > - label = "environment"; > - reg = <0x00300000 0x00080000>; > - }; > - > - partition@2 { > - label = "redundant-environment"; > - reg = <0x00380000 0x00080000>; > - }; > - > - partition@3 { > - label = "kernel"; > - reg = <0x00400000 0x00400000>; > - }; > - > - partition@4 { > - label = "filesystem"; > - reg = <0x00800000 0x0f800000>; > - }; > }; > }; > >
On Wed, Apr 27, 2016 at 12:27:52PM -0300, Fabio Estevam wrote: > mtdparts is passed from command line, so there is no need to have a > default partitioning in device-tree. > > Suggested-by: Marek Vasut <marex@denx.de> > Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Applied, thanks.
diff --git a/arch/arm/boot/dts/imx28-m28.dtsi b/arch/arm/boot/dts/imx28-m28.dtsi index 759cc56..6cebaa6 100644 --- a/arch/arm/boot/dts/imx28-m28.dtsi +++ b/arch/arm/boot/dts/imx28-m28.dtsi @@ -27,32 +27,6 @@ pinctrl-names = "default"; pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>; status = "okay"; - - partition@0 { - label = "bootloader"; - reg = <0x00000000 0x00300000>; - read-only; - }; - - partition@1 { - label = "environment"; - reg = <0x00300000 0x00080000>; - }; - - partition@2 { - label = "redundant-environment"; - reg = <0x00380000 0x00080000>; - }; - - partition@3 { - label = "kernel"; - reg = <0x00400000 0x00400000>; - }; - - partition@4 { - label = "filesystem"; - reg = <0x00800000 0x0f800000>; - }; }; };
mtdparts is passed from command line, so there is no need to have a default partitioning in device-tree. Suggested-by: Marek Vasut <marex@denx.de> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> --- Changes since v1: - Remove all partition nodes arch/arm/boot/dts/imx28-m28.dtsi | 26 -------------------------- 1 file changed, 26 deletions(-)