diff mbox

[v8,5/9] ARM: dts: am437x/am33xx/da850: Add new ECAP and EPWM bindings

Message ID 1462291015-1919-6-git-send-email-fcooper@ti.com (mailing list archive)
State New, archived
Headers show

Commit Message

Franklin Cooper May 3, 2016, 3:56 p.m. UTC
Switch to a new ECAP and EPWM bindings that doesn't depend on hwmod to
provide the various required clocks.

For AM437 and AM335x, add the required clocks explicitly to DT. The
hwmod entries for ECAP and EPWM will be removed and this will prevent
anything from breaking.

Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
Acked-by: Rob Herring <robh@kernel.org>
---
 .../devicetree/bindings/pwm/pwm-tiecap.txt         | 18 +++++---
 .../devicetree/bindings/pwm/pwm-tiehrpwm.txt       | 18 +++++---
 arch/arm/boot/dts/am33xx.dtsi                      | 30 +++++++++---
 arch/arm/boot/dts/am4372.dtsi                      | 54 ++++++++++++++++++----
 arch/arm/boot/dts/da850.dtsi                       | 15 ++++--
 5 files changed, 103 insertions(+), 32 deletions(-)

Comments

Tony Lindgren June 10, 2016, 10:34 a.m. UTC | #1
* Franklin S Cooper Jr <fcooper@ti.com> [160503 08:58]:
> Switch to a new ECAP and EPWM bindings that doesn't depend on hwmod to
> provide the various required clocks.
> 
> For AM437 and AM335x, add the required clocks explicitly to DT. The
> hwmod entries for ECAP and EPWM will be removed and this will prevent
> anything from breaking.

I've applying the first patch into omap-for-v4.8/soc, the rest into
omap-for-v4.8/dt. Note that this patch did not apply against d850.dtsi
so please resend that change as a separate patch to the davinci
maintainer.

Regards,

Tony
Tony Lindgren June 10, 2016, 12:01 p.m. UTC | #2
* Tony Lindgren <tony@atomide.com> [160610 03:37]:
> * Franklin S Cooper Jr <fcooper@ti.com> [160503 08:58]:
> > Switch to a new ECAP and EPWM bindings that doesn't depend on hwmod to
> > provide the various required clocks.
> > 
> > For AM437 and AM335x, add the required clocks explicitly to DT. The
> > hwmod entries for ECAP and EPWM will be removed and this will prevent
> > anything from breaking.
> 
> I've applying the first patch into omap-for-v4.8/soc, the rest into
> omap-for-v4.8/dt. Note that this patch did not apply against d850.dtsi
> so please resend that change as a separate patch to the davinci
> maintainer.

And I did not apply patch "pwms: pwm-ti*: Get the clock from the PWMSS
parent when using old bindings", Thierry should take that one.

Regards,

Tony
Thierry Reding June 10, 2016, 12:40 p.m. UTC | #3
On Fri, Jun 10, 2016 at 05:01:43AM -0700, Tony Lindgren wrote:
> * Tony Lindgren <tony@atomide.com> [160610 03:37]:
> > * Franklin S Cooper Jr <fcooper@ti.com> [160503 08:58]:
> > > Switch to a new ECAP and EPWM bindings that doesn't depend on hwmod to
> > > provide the various required clocks.
> > > 
> > > For AM437 and AM335x, add the required clocks explicitly to DT. The
> > > hwmod entries for ECAP and EPWM will be removed and this will prevent
> > > anything from breaking.
> > 
> > I've applying the first patch into omap-for-v4.8/soc, the rest into
> > omap-for-v4.8/dt. Note that this patch did not apply against d850.dtsi
> > so please resend that change as a separate patch to the davinci
> > maintainer.
> 
> And I did not apply patch "pwms: pwm-ti*: Get the clock from the PWMSS
> parent when using old bindings", Thierry should take that one.

Tony, did you take patches 3 and 4 already? It's fine if yo have, just
wanted to know whether I should pick those up as well.

Thierry
Tony Lindgren June 10, 2016, 1:01 p.m. UTC | #4
* Thierry Reding <thierry.reding@gmail.com> [160610 05:42]:
> On Fri, Jun 10, 2016 at 05:01:43AM -0700, Tony Lindgren wrote:
> > * Tony Lindgren <tony@atomide.com> [160610 03:37]:
> > > * Franklin S Cooper Jr <fcooper@ti.com> [160503 08:58]:
> > > > Switch to a new ECAP and EPWM bindings that doesn't depend on hwmod to
> > > > provide the various required clocks.
> > > > 
> > > > For AM437 and AM335x, add the required clocks explicitly to DT. The
> > > > hwmod entries for ECAP and EPWM will be removed and this will prevent
> > > > anything from breaking.
> > > 
> > > I've applying the first patch into omap-for-v4.8/soc, the rest into
> > > omap-for-v4.8/dt. Note that this patch did not apply against d850.dtsi
> > > so please resend that change as a separate patch to the davinci
> > > maintainer.
> > 
> > And I did not apply patch "pwms: pwm-ti*: Get the clock from the PWMSS
> > parent when using old bindings", Thierry should take that one.
> 
> Tony, did you take patches 3 and 4 already? It's fine if yo have, just
> wanted to know whether I should pick those up as well.

Yes looks like I also took the binding documentation patches too.

Regards,

Tony
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/pwm/pwm-tiecap.txt b/Documentation/devicetree/bindings/pwm/pwm-tiecap.txt
index 0d47354..ee0a8bd 100644
--- a/Documentation/devicetree/bindings/pwm/pwm-tiecap.txt
+++ b/Documentation/devicetree/bindings/pwm/pwm-tiecap.txt
@@ -2,9 +2,9 @@  TI SOC ECAP based APWM controller
 
 Required properties:
 - compatible: Must be "ti,<soc>-ecap".
-  for am33xx  - compatible = "ti,am33xx-ecap";
-  for am4372  - compatible = "ti,am4372-ecap", "ti,am33xx-ecap";
-  for da850   - compatible = "ti,da850-ecap", "ti,am33xx-ecap";
+  for am33xx - compatible = "ti,am3352-ecap", "ti,am33xx-ecap";
+  for am4372 - compatible = "ti,am4372-ecap", "ti,am3352-ecap", "ti,am33xx-ecap";
+  for da850  - compatible = "ti,da850-ecap", "ti,am3352-ecap", "ti,am33xx-ecap";
 - #pwm-cells: should be 3. See pwm.txt in this directory for a description of
   the cells format. The PWM channel index ranges from 0 to 4. The only third
   cell flag supported by this binding is PWM_POLARITY_INVERTED.
@@ -13,25 +13,31 @@  Required properties:
 Optional properties:
 - ti,hwmods: Name of the hwmod associated to the ECAP:
   "ecap<x>", <x> being the 0-based instance number from the HW spec
+- clocks: Handle to the ECAP's functional clock.
+- clock-names: Must be set to "fck".
 
 Example:
 
 ecap0: ecap@48300100 { /* ECAP on am33xx */
-	compatible = "ti,am33xx-ecap";
+	compatible = "ti,am3352-ecap", "ti,am33xx-ecap";
 	#pwm-cells = <3>;
 	reg = <0x48300100 0x80>;
 	ti,hwmods = "ecap0";
+	clocks = <&l4ls_gclk>;
+	clock-names = "fck";
 };
 
 ecap0: ecap@48300100 { /* ECAP on am4372 */
-	compatible = "ti,am4372-ecap", "ti,am33xx-ecap";
+	compatible = "ti,am4372-ecap", "ti,am3352-ecap", "ti,am33xx-ecap";
 	#pwm-cells = <3>;
 	reg = <0x48300100 0x80>;
 	ti,hwmods = "ecap0";
+	clocks = <&l4ls_gclk>;
+	clock-names = "fck";
 };
 
 ecap0: ecap@1f06000 { /* ECAP on da850 */
-	compatible = "ti,da850-ecap", "ti,am33xx-ecap";
+	compatible = "ti,da850-ecap", "ti,am3352-ecap", "ti,am33xx-ecap";
 	#pwm-cells = <3>;
 	reg = <0x1f06000 0x80>;
 };
diff --git a/Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.txt b/Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.txt
index f3bc09e..e9a156b 100644
--- a/Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.txt
+++ b/Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.txt
@@ -2,9 +2,9 @@  TI SOC EHRPWM based PWM controller
 
 Required properties:
 - compatible: Must be "ti,<soc>-ehrpwm".
-  for am33xx  - compatible = "ti,am33xx-ehrpwm";
-  for am4372  - compatible = "ti,am4372-ehrpwm", "ti,am33xx-ehrpwm";
-  for da850   - compatible = "ti,da850-ehrpwm", "ti,am33xx-ehrpwm";
+  for am33xx  - compatible = "ti,am3352-ehrpwm", "ti,am33xx-ehrpwm";
+  for am4372  - compatible = "ti,am4372-ehrpwm", "ti-am3352-ehrpwm", "ti,am33xx-ehrpwm";
+  for da850   - compatible = "ti,da850-ehrpwm", "ti-am3352-ehrpwm", "ti,am33xx-ehrpwm";
 - #pwm-cells: should be 3. See pwm.txt in this directory for a description of
   the cells format. The only third cell flag supported by this binding is
   PWM_POLARITY_INVERTED.
@@ -13,25 +13,31 @@  Required properties:
 Optional properties:
 - ti,hwmods: Name of the hwmod associated to the EHRPWM:
   "ehrpwm<x>", <x> being the 0-based instance number from the HW spec
+- clocks: Handle to the PWM's time-base and functional clock.
+- clock-names: Must be set to "tbclk" and "fck".
 
 Example:
 
 ehrpwm0: pwm@48300200 { /* EHRPWM on am33xx */
-	compatible = "ti,am33xx-ehrpwm";
+	compatible = "ti,am3352-ehrpwm", "ti,am33xx-ehrpwm";
 	#pwm-cells = <3>;
 	reg = <0x48300200 0x100>;
+	clocks = <&ehrpwm0_tbclk>, <&l4ls_gclk>;
+	clock-names = "tbclk", "fck";
 	ti,hwmods = "ehrpwm0";
 };
 
 ehrpwm0: pwm@48300200 { /* EHRPWM on am4372 */
-	compatible = "ti,am4372-ehrpwm", "ti,am33xx-ehrpwm";
+	compatible = "ti,am4372-ehrpwm", "ti,am3352-ehrpwm", "ti,am33xx-ehrpwm";
 	#pwm-cells = <3>;
 	reg = <0x48300200 0x80>;
+	clocks = <&ehrpwm0_tbclk>, <&l4ls_gclk>;
+	clock-names = "tbclk", "fck";
 	ti,hwmods = "ehrpwm0";
 };
 
 ehrpwm0: pwm@1f00000 { /* EHRPWM on da850 */
-	compatible = "ti,da850-ehrpwm", "ti,am33xx-ehrpwm";
+	compatible = "ti,da850-ehrpwm", "ti,am3352-ehrpwm", "ti,am33xx-ehrpwm";
 	#pwm-cells = <3>;
 	reg = <0x1f00000 0x2000>;
 };
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index 52be48b..999ba2f 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -679,9 +679,12 @@ 
 				  0x48300200 0x48300200 0x80>; /* EHRPWM */
 
 			ecap0: ecap@48300100 {
-				compatible = "ti,am33xx-ecap";
+				compatible = "ti,am3352-ecap",
+					     "ti,am33xx-ecap";
 				#pwm-cells = <3>;
 				reg = <0x48300100 0x80>;
+				clocks = <&l4ls_gclk>;
+				clock-names = "fck";
 				interrupts = <31>;
 				interrupt-names = "ecap0";
 				ti,hwmods = "ecap0";
@@ -689,10 +692,13 @@ 
 			};
 
 			ehrpwm0: pwm@48300200 {
-				compatible = "ti,am33xx-ehrpwm";
+				compatible = "ti,am3352-ehrpwm",
+					     "ti,am33xx-ehrpwm";
 				#pwm-cells = <3>;
 				reg = <0x48300200 0x80>;
 				ti,hwmods = "ehrpwm0";
+				clocks = <&ehrpwm0_tbclk>, <&l4ls_gclk>;
+				clock-names = "tbclk", "fck";
 				status = "disabled";
 			};
 		};
@@ -709,9 +715,12 @@ 
 				  0x48302200 0x48302200 0x80>; /* EHRPWM */
 
 			ecap1: ecap@48302100 {
-				compatible = "ti,am33xx-ecap";
+				compatible = "ti,am3352-ecap",
+					     "ti,am33xx-ecap";
 				#pwm-cells = <3>;
 				reg = <0x48302100 0x80>;
+				clocks = <&l4ls_gclk>;
+				clock-names = "fck";
 				interrupts = <47>;
 				interrupt-names = "ecap1";
 				ti,hwmods = "ecap1";
@@ -719,10 +728,13 @@ 
 			};
 
 			ehrpwm1: pwm@48302200 {
-				compatible = "ti,am33xx-ehrpwm";
+				compatible = "ti,am3352-ehrpwm",
+					     "ti,am33xx-ehrpwm";
 				#pwm-cells = <3>;
 				reg = <0x48302200 0x80>;
 				ti,hwmods = "ehrpwm1";
+				clocks = <&ehrpwm1_tbclk>, <&l4ls_gclk>;
+				clock-names = "tbclk", "fck";
 				status = "disabled";
 			};
 		};
@@ -739,9 +751,12 @@ 
 				  0x48304200 0x48304200 0x80>; /* EHRPWM */
 
 			ecap2: ecap@48304100 {
-				compatible = "ti,am33xx-ecap";
+				compatible = "ti,am3352-ecap",
+					     "ti,am33xx-ecap";
 				#pwm-cells = <3>;
 				reg = <0x48304100 0x80>;
+				clocks = <&l4ls_gclk>;
+				clock-names = "fck";
 				interrupts = <61>;
 				interrupt-names = "ecap2";
 				ti,hwmods = "ecap2";
@@ -749,10 +764,13 @@ 
 			};
 
 			ehrpwm2: pwm@48304200 {
-				compatible = "ti,am33xx-ehrpwm";
+				compatible = "ti,am3352-ehrpwm",
+					     "ti,am33xx-ehrpwm";
 				#pwm-cells = <3>;
 				reg = <0x48304200 0x80>;
 				ti,hwmods = "ehrpwm2";
+				clocks = <&ehrpwm2_tbclk>, <&l4ls_gclk>;
+				clock-names = "tbclk", "fck";
 				status = "disabled";
 			};
 		};
diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
index 12fcde4..e858460 100644
--- a/arch/arm/boot/dts/am4372.dtsi
+++ b/arch/arm/boot/dts/am4372.dtsi
@@ -672,18 +672,26 @@ 
 			status = "disabled";
 
 			ecap0: ecap@48300100 {
-				compatible = "ti,am4372-ecap","ti,am33xx-ecap";
+				compatible = "ti,am4372-ecap",
+					     "ti,am3352-ecap",
+					     "ti,am33xx-ecap";
 				#pwm-cells = <3>;
 				reg = <0x48300100 0x80>;
 				ti,hwmods = "ecap0";
+				clocks = <&l4ls_gclk>;
+				clock-names = "fck";
 				status = "disabled";
 			};
 
 			ehrpwm0: pwm@48300200 {
-				compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
+				compatible = "ti,am4372-ehrpwm",
+					     "ti,am3352-ehrpwm",
+					     "ti,am33xx-ehrpwm";
 				#pwm-cells = <3>;
 				reg = <0x48300200 0x80>;
 				ti,hwmods = "ehrpwm0";
+				clocks = <&ehrpwm0_tbclk>, <&l4ls_gclk>;
+				clock-names = "tbclk", "fck";
 				status = "disabled";
 			};
 		};
@@ -698,18 +706,26 @@ 
 			status = "disabled";
 
 			ecap1: ecap@48302100 {
-				compatible = "ti,am4372-ecap","ti,am33xx-ecap";
+				compatible = "ti,am4372-ecap",
+					     "ti,am3352-ecap",
+					     "ti,am33xx-ecap";
 				#pwm-cells = <3>;
 				reg = <0x48302100 0x80>;
 				ti,hwmods = "ecap1";
+				clocks = <&l4ls_gclk>;
+				clock-names = "fck";
 				status = "disabled";
 			};
 
 			ehrpwm1: pwm@48302200 {
-				compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
+				compatible = "ti,am4372-ehrpwm",
+					     "ti,am3352-ehrpwm",
+					     "ti,am33xx-ehrpwm";
 				#pwm-cells = <3>;
 				reg = <0x48302200 0x80>;
 				ti,hwmods = "ehrpwm1";
+				clocks = <&ehrpwm1_tbclk>, <&l4ls_gclk>;
+				clock-names = "tbclk", "fck";
 				status = "disabled";
 			};
 		};
@@ -724,18 +740,26 @@ 
 			status = "disabled";
 
 			ecap2: ecap@48304100 {
-				compatible = "ti,am4372-ecap","ti,am33xx-ecap";
+				compatible = "ti,am4372-ecap",
+					     "ti,am3352-ecap",
+					     "ti,am33xx-ecap";
 				#pwm-cells = <3>;
 				reg = <0x48304100 0x80>;
+				clocks = <&l4ls_gclk>;
+				clock-names = "fck";
 				ti,hwmods = "ecap2";
 				status = "disabled";
 			};
 
 			ehrpwm2: pwm@48304200 {
-				compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
+				compatible = "ti,am4372-ehrpwm",
+					     "ti,am3352-ehrpwm",
+					     "ti,am33xx-ehrpwm";
 				#pwm-cells = <3>;
 				reg = <0x48304200 0x80>;
 				ti,hwmods = "ehrpwm2";
+				clocks = <&ehrpwm2_tbclk>, <&l4ls_gclk>;
+				clock-names = "tbclk", "fck";
 				status = "disabled";
 			};
 		};
@@ -750,10 +774,14 @@ 
 			status = "disabled";
 
 			ehrpwm3: pwm@48306200 {
-				compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
+				compatible = "ti,am4372-ehrpwm",
+					     "ti,am3352-ehrpwm",
+					     "ti,am33xx-ehrpwm";
 				#pwm-cells = <3>;
 				reg = <0x48306200 0x80>;
 				ti,hwmods = "ehrpwm3";
+				clocks = <&ehrpwm3_tbclk>, <&l4ls_gclk>;
+				clock-names = "tbclk", "fck";
 				status = "disabled";
 			};
 		};
@@ -768,10 +796,14 @@ 
 			status = "disabled";
 
 			ehrpwm4: pwm@48308200 {
-				compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
+				compatible = "ti,am4372-ehrpwm",
+					     "ti,am3352-ehrpwm",
+					     "ti,am33xx-ehrpwm";
 				#pwm-cells = <3>;
 				reg = <0x48308200 0x80>;
 				ti,hwmods = "ehrpwm4";
+				clocks = <&ehrpwm4_tbclk>, <&l4ls_gclk>;
+				clock-names = "tbclk", "fck";
 				status = "disabled";
 			};
 		};
@@ -786,9 +818,13 @@ 
 			status = "disabled";
 
 			ehrpwm5: pwm@4830a200 {
-				compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
+				compatible = "ti,am4372-ehrpwm",
+					     "ti,am3352-ehrpwm",
+					     "ti,am33xx-ehrpwm";
 				#pwm-cells = <3>;
 				reg = <0x4830a200 0x80>;
+				clocks = <&ehrpwm5_tbclk>, <&l4ls_gclk>;
+				clock-names = "tbclk", "fck";
 				ti,hwmods = "ehrpwm5";
 				status = "disabled";
 			};
diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi
index c3910e2..28a1064 100644
--- a/arch/arm/boot/dts/da850.dtsi
+++ b/arch/arm/boot/dts/da850.dtsi
@@ -248,31 +248,36 @@ 
 			status = "disabled";
 		};
 		ehrpwm0: pwm@01f00000 {
-			compatible = "ti,da850-ehrpwm", "ti,am33xx-ehrpwm";
+			compatible = "ti,da850-ehrpwm", "ti,am3352-ehrpwm",
+				     "ti,am33xx-ehrpwm";
 			#pwm-cells = <3>;
 			reg = <0x300000 0x2000>;
 			status = "disabled";
 		};
 		ehrpwm1: pwm@01f02000 {
-			compatible = "ti,da850-ehrpwm", "ti,am33xx-ehrpwm";
+			compatible = "ti,da850-ehrpwm", "ti,am3352-ehrpwm",
+				     "ti,am33xx-ehrpwm";
 			#pwm-cells = <3>;
 			reg = <0x302000 0x2000>;
 			status = "disabled";
 		};
 		ecap0: ecap@01f06000 {
-			compatible = "ti,da850-ecap", "ti,am33xx-ecap";
+			compatible = "ti,da850-ecap", "ti,am3352-ecap",
+				     "ti,am33xx-ecap";
 			#pwm-cells = <3>;
 			reg = <0x306000 0x80>;
 			status = "disabled";
 		};
 		ecap1: ecap@01f07000 {
-			compatible = "ti,da850-ecap", "ti,am33xx-ecap";
+			compatible = "ti,da850-ecap", "ti,am3352-ecap",
+				     "ti,am33xx-ecap";
 			#pwm-cells = <3>;
 			reg = <0x307000 0x80>;
 			status = "disabled";
 		};
 		ecap2: ecap@01f08000 {
-			compatible = "ti,da850-ecap", "ti,am33xx-ecap";
+			compatible = "ti,da850-ecap", "ti,am3352-ecap",
+				     "ti,am33xx-ecap";
 			#pwm-cells = <3>;
 			reg = <0x308000 0x80>;
 			status = "disabled";