| Message ID | 1462295659-6945-2-git-send-email-plaes@plaes.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi, On Tue, May 03, 2016 at 08:14:18PM +0300, Priit Laes wrote: > Enable pll3 and pll7 clocks that are needed to drive display clocks. > > Signed-off-by: Priit Laes <plaes@plaes.org> > --- > arch/arm/boot/dts/sun4i-a10.dtsi | 44 ++++++++++++++++++++++++++++++++++++++++ > 1 file changed, 44 insertions(+) > > diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi > index 268a150..c893744 100644 > --- a/arch/arm/boot/dts/sun4i-a10.dtsi > +++ b/arch/arm/boot/dts/sun4i-a10.dtsi > @@ -184,6 +184,15 @@ > clock-output-names = "osc24M"; > }; > > + osc3M: osc3M_clk { > + compatible = "fixed-factor-clock"; > + #clock-cells = <0>; > + clock-div = <8>; > + clock-mult = <1>; > + clocks = <&osc24M>; > + clock-output-names = "osc3M"; > + }; > + > osc32k: clk@0 { > #clock-cells = <0>; > compatible = "fixed-clock"; > @@ -208,6 +217,24 @@ > "pll2-4x", "pll2-8x"; > }; > > + pll3: clk@01c20010 { > + #clock-cells = <0>; > + compatible = "allwinner,sun4i-a10-pll3-clk"; > + reg = <0x01c20010 0x4>; > + clocks = <&osc3M>; > + clock-output-names = "pll3"; > + }; > + > + pll3x2: pll3x2_clk { > + compatible = "fixed-factor-clock"; > + #clock-cells = <0>; > + clock-div = <1>; > + clock-mult = <2>; > + clocks = <&pll3>; > + clock-output-names = "pll3-x2"; We usually call them -2x > + }; > + > + One newline too many. Fixed it and applied the patch. Thanks! Maxime
diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi index 268a150..c893744 100644 --- a/arch/arm/boot/dts/sun4i-a10.dtsi +++ b/arch/arm/boot/dts/sun4i-a10.dtsi @@ -184,6 +184,15 @@ clock-output-names = "osc24M"; }; + osc3M: osc3M_clk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clock-div = <8>; + clock-mult = <1>; + clocks = <&osc24M>; + clock-output-names = "osc3M"; + }; + osc32k: clk@0 { #clock-cells = <0>; compatible = "fixed-clock"; @@ -208,6 +217,24 @@ "pll2-4x", "pll2-8x"; }; + pll3: clk@01c20010 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-pll3-clk"; + reg = <0x01c20010 0x4>; + clocks = <&osc3M>; + clock-output-names = "pll3"; + }; + + pll3x2: pll3x2_clk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clock-div = <1>; + clock-mult = <2>; + clocks = <&pll3>; + clock-output-names = "pll3-x2"; + }; + + pll4: clk@01c20018 { #clock-cells = <0>; compatible = "allwinner,sun4i-a10-pll1-clk"; @@ -232,6 +259,23 @@ clock-output-names = "pll6_sata", "pll6_other", "pll6"; }; + pll7: clk@01c20030 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-pll3-clk"; + reg = <0x01c20030 0x4>; + clocks = <&osc3M>; + clock-output-names = "pll7"; + }; + + pll7x2: pll7x2_clk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clock-div = <1>; + clock-mult = <2>; + clocks = <&pll7>; + clock-output-names = "pll7-2x"; + }; + /* dummy is 200M */ cpu: cpu@01c20054 { #clock-cells = <0>;
Enable pll3 and pll7 clocks that are needed to drive display clocks. Signed-off-by: Priit Laes <plaes@plaes.org> --- arch/arm/boot/dts/sun4i-a10.dtsi | 44 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 44 insertions(+)