diff mbox

[2/3] dt-bindings: reset: Add bindings for the Meson GXBB Reset Controller

Message ID 1463732875-23141-3-git-send-email-narmstrong@baylibre.com (mailing list archive)
State New, archived
Headers show

Commit Message

Neil Armstrong May 20, 2016, 8:27 a.m. UTC
Add DT bindings for the Meson GXBB SoC Reset Controller documentation and the
associated include file.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 .../bindings/reset/amlogic,meson-gxbb-reset.txt    |  18 ++
 .../dt-bindings/reset/amlogic,meson-gxbb-reset.h   | 199 +++++++++++++++++++++
 2 files changed, 217 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/reset/amlogic,meson-gxbb-reset.txt
 create mode 100644 include/dt-bindings/reset/amlogic,meson-gxbb-reset.h

Comments

Carlo Caione May 20, 2016, 8:46 a.m. UTC | #1
On 20/05/16 10:27, Neil Armstrong wrote:
> Add DT bindings for the Meson GXBB SoC Reset Controller documentation and the
> associated include file.

[...]

> +#define RESET_I2C_MASTER_2	142
> +#define RESET_I2C_MASTER_1	143
> +/*				144-159	*/
> +/*	RESET5				*/
> +/*				160-191	*/
> +/*	RESET6				*/
> +#define RESET_PERIPHS_GENERAL	192
> +#define RESET_PERIPHS_SPICC	193
> +#define RESET_PERIPHS_SMART_CARD	194
> +#define RESET_PERIPHS_SAR_ADC	195
> +#define RESET_PERIPHS_I2C_MASTER_0	196
> +#define RESET_SANA		197
> +/*				198	*/
> +#define RESET_PERIPHS_STREAM_INTERFACE	199
> +#define RESET_PERIPHS_SDIO	200
> +#define RESET_PERIPHS_UART_0	201
> +#define RESET_PERIPHS_UART_1_2	202
> +#define RESET_PERIPHS_ASYNC_0	203
> +#define RESET_PERIPHS_ASYNC_1	204
> +#define RESET_PERIPHS_SPI_0	205
> +#define RESET_PERIPHS_SDHC	206
> +#define RESET_UART_SLIP		207
> +/*				208-223	*/
> +/*	RESET7				*/
> +#define RESET_USB_DDR_0		224
> +#define RESET_USB_DDR_1		225
> +#define RESET_USB_DDR_2		226
> +#define RESET_USB_DDR_3		227
> +/*				228	*/
> +#define RESET_DEVICE_MMC_ARB	229
> +/*				230	*/
> +#define RESET_VID_LOCK		231
> +#define RESET_A9_DMC_PIPEL	232
> +/*				233-255	*/
> +
> +#endif

Indentation looks really messy. Can you just shift the numbers to the
right so that they are on the same column?
Neil Armstrong May 20, 2016, 8:51 a.m. UTC | #2
On 05/20/2016 10:46 AM, Carlo Caione wrote:
> On 20/05/16 10:27, Neil Armstrong wrote:
>> Add DT bindings for the Meson GXBB SoC Reset Controller documentation and the
>> associated include file.
> 
> [...]
> 
>> +#define RESET_I2C_MASTER_2	142
>> +#define RESET_I2C_MASTER_1	143
>> +/*				144-159	*/
>> +/*	RESET5				*/
>> +/*				160-191	*/
>> +/*	RESET6				*/
>> +#define RESET_PERIPHS_GENERAL	192
>> +#define RESET_PERIPHS_SPICC	193
>> +#define RESET_PERIPHS_SMART_CARD	194
>> +#define RESET_PERIPHS_SAR_ADC	195
>> +#define RESET_PERIPHS_I2C_MASTER_0	196
>> +#define RESET_SANA		197
>> +/*				198	*/
>> +#define RESET_PERIPHS_STREAM_INTERFACE	199
>> +#define RESET_PERIPHS_SDIO	200
>> +#define RESET_PERIPHS_UART_0	201
>> +#define RESET_PERIPHS_UART_1_2	202
>> +#define RESET_PERIPHS_ASYNC_0	203
>> +#define RESET_PERIPHS_ASYNC_1	204
>> +#define RESET_PERIPHS_SPI_0	205
>> +#define RESET_PERIPHS_SDHC	206
>> +#define RESET_UART_SLIP		207
>> +/*				208-223	*/
>> +/*	RESET7				*/
>> +#define RESET_USB_DDR_0		224
>> +#define RESET_USB_DDR_1		225
>> +#define RESET_USB_DDR_2		226
>> +#define RESET_USB_DDR_3		227
>> +/*				228	*/
>> +#define RESET_DEVICE_MMC_ARB	229
>> +/*				230	*/
>> +#define RESET_VID_LOCK		231
>> +#define RESET_A9_DMC_PIPEL	232
>> +/*				233-255	*/
>> +
>> +#endif
> 
> Indentation looks really messy. Can you just shift the numbers to the
> right so that they are on the same column?
> 
Hi Carlo,

The patch format makes it very messy, not as in the original format :
https://github.com/superna9999/linux/blob/6163f8742454bb7ff962956b4e286d110ec0fb79/include/dt-bindings/reset/amlogic%2Cmeson-gxbb-reset.h

Neil
Carlo Caione May 20, 2016, 9:08 a.m. UTC | #3
On 20/05/16 10:51, Neil Armstrong wrote:
> On 05/20/2016 10:46 AM, Carlo Caione wrote:
> > On 20/05/16 10:27, Neil Armstrong wrote:
> >> Add DT bindings for the Meson GXBB SoC Reset Controller documentation and the
> >> associated include file.
> > 
> > [...]
> > 
> >> +#define RESET_I2C_MASTER_2	142
> >> +#define RESET_I2C_MASTER_1	143
> >> +/*				144-159	*/
> >> +/*	RESET5				*/
> >> +/*				160-191	*/
> >> +/*	RESET6				*/
> >> +#define RESET_PERIPHS_GENERAL	192
> >> +#define RESET_PERIPHS_SPICC	193
> >> +#define RESET_PERIPHS_SMART_CARD	194
> >> +#define RESET_PERIPHS_SAR_ADC	195
> >> +#define RESET_PERIPHS_I2C_MASTER_0	196
> >> +#define RESET_SANA		197
> >> +/*				198	*/
> >> +#define RESET_PERIPHS_STREAM_INTERFACE	199
> >> +#define RESET_PERIPHS_SDIO	200
> >> +#define RESET_PERIPHS_UART_0	201
> >> +#define RESET_PERIPHS_UART_1_2	202
> >> +#define RESET_PERIPHS_ASYNC_0	203
> >> +#define RESET_PERIPHS_ASYNC_1	204
> >> +#define RESET_PERIPHS_SPI_0	205
> >> +#define RESET_PERIPHS_SDHC	206
> >> +#define RESET_UART_SLIP		207
> >> +/*				208-223	*/
> >> +/*	RESET7				*/
> >> +#define RESET_USB_DDR_0		224
> >> +#define RESET_USB_DDR_1		225
> >> +#define RESET_USB_DDR_2		226
> >> +#define RESET_USB_DDR_3		227
> >> +/*				228	*/
> >> +#define RESET_DEVICE_MMC_ARB	229
> >> +/*				230	*/
> >> +#define RESET_VID_LOCK		231
> >> +#define RESET_A9_DMC_PIPEL	232
> >> +/*				233-255	*/
> >> +
> >> +#endif
> > 
> > Indentation looks really messy. Can you just shift the numbers to the
> > right so that they are on the same column?
> > 
> Hi Carlo,
> 
> The patch format makes it very messy, not as in the original format :
> https://github.com/superna9999/linux/blob/6163f8742454bb7ff962956b4e286d110ec0fb79/include/dt-bindings/reset/amlogic%2Cmeson-gxbb-reset.h

https://raw.githubusercontent.com/superna9999/linux/6163f8742454bb7ff962956b4e286d110ec0fb79/include/dt-bindings/reset/amlogic%2Cmeson-gxbb-reset.h

yes, but 192 -> 200 are not nicely indented to me :)
Neil Armstrong May 20, 2016, 12:18 p.m. UTC | #4
On 05/20/2016 11:08 AM, Carlo Caione wrote:
> On 20/05/16 10:51, Neil Armstrong wrote:
>> On 05/20/2016 10:46 AM, Carlo Caione wrote:
>>> On 20/05/16 10:27, Neil Armstrong wrote:
>>>> Add DT bindings for the Meson GXBB SoC Reset Controller documentation and the
>>>> associated include file.
>>>
>>> [...]
>>>
>>>> +#define RESET_I2C_MASTER_2	142
>>>> +#define RESET_I2C_MASTER_1	143
>>>> +/*				144-159	*/
>>>> +/*	RESET5				*/
>>>> +/*				160-191	*/
>>>> +/*	RESET6				*/
>>>> +#define RESET_PERIPHS_GENERAL	192
>>>> +#define RESET_PERIPHS_SPICC	193
>>>> +#define RESET_PERIPHS_SMART_CARD	194
>>>> +#define RESET_PERIPHS_SAR_ADC	195
>>>> +#define RESET_PERIPHS_I2C_MASTER_0	196
>>>> +#define RESET_SANA		197
>>>> +/*				198	*/
>>>> +#define RESET_PERIPHS_STREAM_INTERFACE	199
>>>> +#define RESET_PERIPHS_SDIO	200
>>>> +#define RESET_PERIPHS_UART_0	201
>>>> +#define RESET_PERIPHS_UART_1_2	202
>>>> +#define RESET_PERIPHS_ASYNC_0	203
>>>> +#define RESET_PERIPHS_ASYNC_1	204
>>>> +#define RESET_PERIPHS_SPI_0	205
>>>> +#define RESET_PERIPHS_SDHC	206
>>>> +#define RESET_UART_SLIP		207
>>>> +/*				208-223	*/
>>>> +/*	RESET7				*/
>>>> +#define RESET_USB_DDR_0		224
>>>> +#define RESET_USB_DDR_1		225
>>>> +#define RESET_USB_DDR_2		226
>>>> +#define RESET_USB_DDR_3		227
>>>> +/*				228	*/
>>>> +#define RESET_DEVICE_MMC_ARB	229
>>>> +/*				230	*/
>>>> +#define RESET_VID_LOCK		231
>>>> +#define RESET_A9_DMC_PIPEL	232
>>>> +/*				233-255	*/
>>>> +
>>>> +#endif
>>>
>>> Indentation looks really messy. Can you just shift the numbers to the
>>> right so that they are on the same column?
>>>
>> Hi Carlo,
>>
>> The patch format makes it very messy, not as in the original format :
>> https://github.com/superna9999/linux/blob/6163f8742454bb7ff962956b4e286d110ec0fb79/include/dt-bindings/reset/amlogic%2Cmeson-gxbb-reset.h
> 
> https://raw.githubusercontent.com/superna9999/linux/6163f8742454bb7ff962956b4e286d110ec0fb79/include/dt-bindings/reset/amlogic%2Cmeson-gxbb-reset.h
> 
> yes, but 192 -> 200 are not nicely indented to me :)
> 

Aw, you got me !

I will add a shift and add a separate meson8b version of this file.

Neil
Rob Herring (Arm) May 23, 2016, 9:04 p.m. UTC | #5
On Fri, May 20, 2016 at 10:27:54AM +0200, Neil Armstrong wrote:
> Add DT bindings for the Meson GXBB SoC Reset Controller documentation and the
> associated include file.
> 
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
> ---
>  .../bindings/reset/amlogic,meson-gxbb-reset.txt    |  18 ++
>  .../dt-bindings/reset/amlogic,meson-gxbb-reset.h   | 199 +++++++++++++++++++++
>  2 files changed, 217 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/reset/amlogic,meson-gxbb-reset.txt
>  create mode 100644 include/dt-bindings/reset/amlogic,meson-gxbb-reset.h

Other than the whitespace comments,

Acked-by: Rob Herring <robh@kernel.org>
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/reset/amlogic,meson-gxbb-reset.txt b/Documentation/devicetree/bindings/reset/amlogic,meson-gxbb-reset.txt
new file mode 100644
index 0000000..0758259
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/amlogic,meson-gxbb-reset.txt
@@ -0,0 +1,18 @@ 
+Amlogic Meson GXBB SoC Reset Controller
+=======================================
+
+Please also refer to reset.txt in this directory for common reset
+controller binding usage.
+
+Required properties:
+- compatible: Should be "amlogic,meson-gxbb-reset"
+- reg: should contain the register address base
+- #reset-cells: 1, see below
+
+example:
+
+reset: reset-controller {
+	compatible = "amlogic,meson-gxbb-reset";
+	reg = <0x0 0x04404 0x0 0x20>;
+	#reset-cells = <1>;
+};
diff --git a/include/dt-bindings/reset/amlogic,meson-gxbb-reset.h b/include/dt-bindings/reset/amlogic,meson-gxbb-reset.h
new file mode 100644
index 0000000..ff4e804
--- /dev/null
+++ b/include/dt-bindings/reset/amlogic,meson-gxbb-reset.h
@@ -0,0 +1,199 @@ 
+/*
+ * Copyright (c) 2016 BayLibre, SAS.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef _DT_BINDINGS_AMLOGIC_MESON_GXBB_RESET_H
+#define _DT_BINDINGS_AMLOGIC_MESON_GXBB_RESET_H
+
+/*	RESET0				*/
+#define RESET_HIU		0
+/*				1	*/
+#define RESET_DOS_RESET		2
+#define RESET_DDR_TOP		3
+#define RESET_DCU_RESET		4
+#define RESET_VIU		5
+#define RESET_AIU		6
+#define RESET_VID_PLL_DIV	7
+/*				8	*/
+#define RESET_PMUX		9
+#define RESET_VENC		10
+#define RESET_ASSIST		11
+#define RESET_AFIFO2		12
+#define RESET_VCBUS		13
+/*				14	*/
+/*				15	*/
+#define RESET_GIC		16
+#define RESET_CAPB3_DECODE	17
+#define RESET_NAND_CAPB3	18
+#define RESET_HDMITX_CAPB3	19
+#define RESET_MALI_CAPB3	20
+#define RESET_DOS_CAPB3		21
+#define RESET_SYS_CPU_CAPB3	22
+#define RESET_CBUS_CAPB3	23
+#define RESET_AHB_CNTL		24
+#define RESET_AHB_DATA		25
+#define RESET_VCBUS_CLK81	26
+#define RESET_MMC		27
+#define RESET_MIPI_0		28
+#define RESET_MIPI_1		29
+#define RESET_MIPI_2		30
+#define RESET_MIPI_3		31
+/*	RESET1				*/
+#define RESET_CPPM		32
+#define RESET_DEMUX		33
+#define RESET_USB_OTG		34
+#define RESET_DDR		35
+#define RESET_AO_RESET		36
+#define RESET_BT656		37
+#define RESET_AHB_SRAM		38
+/*				39	*/
+#define RESET_PARSER		40
+#define RESET_BLKMV		41
+#define RESET_ISA		42
+#define RESET_ETHERNET		43
+#define RESET_SD_EMMC_A		44
+#define RESET_SD_EMMC_B		45
+#define RESET_SD_EMMC_C		46
+#define RESET_ROM_BOOT		47
+#define RESET_SYS_CPU_0		48
+#define RESET_SYS_CPU_1		49
+#define RESET_SYS_CPU_2		50
+#define RESET_SYS_CPU_3		51
+#define RESET_SYS_CPU_CORE_0	52
+#define RESET_SYS_CPU_CORE_1	53
+#define RESET_SYS_CPU_CORE_2	54
+#define RESET_SYS_CPU_CORE_3	55
+#define RESET_SYS_PLL_DIV	56
+#define RESET_SYS_CPU_AXI	57
+#define RESET_SYS_CPU_L2	58
+#define RESET_SYS_CPU_P		59
+#define RESET_SYS_CPU_MBIST	60
+/*				61	*/
+/*				62	*/
+/*				63	*/
+/*	RESET2				*/
+#define RESET_VD_RMEM		64
+#define RESET_AUDIN		65
+#define RESET_HDMI_TX		66
+/*				67	*/
+/*				68	*/
+/*				69	*/
+#define RESET_GE2D		70
+#define RESET_PARSER_REG	71
+#define RESET_PARSER_FETCH	72
+#define RESET_PARSER_CTL	73
+#define RESET_PARSER_TOP	74
+/*				75	*/
+/*				76	*/
+#define RESET_AO_CPU_RESET	77
+#define RESET_MALI		78
+#define RESET_HDMI_SYSTEM_RESET	79
+/*				80-95	*/
+/*	RESET3				*/
+#define RESET_RING_OSCILLATOR	96
+#define RESET_SYS_CPU		97
+#define RESET_EFUSE		98
+#define RESET_SYS_CPU_BVCI	99
+#define RESET_AIFIFO		100
+#define RESET_TVFE		101
+#define RESET_AHB_BRIDGE_CNTL	102
+/*				103	*/
+#define RESET_AUDIO_DAC		104
+#define RESET_DEMUX_TOP		105
+#define RESET_DEMUX_DES		106
+#define RESET_DEMUX_S2P_0	107
+#define RESET_DEMUX_S2P_1	108
+#define RESET_DEMUX_RESET_0	109
+#define RESET_DEMUX_RESET_1	110
+#define RESET_DEMUX_RESET_2	111
+/*				112-127	*/
+/*	RESET4				*/
+/*				128	*/
+/*				129	*/
+/*				130	*/
+/*				131	*/
+#define RESET_DVIN_RESET	132
+#define RESET_RDMA		133
+#define RESET_VENCI		134
+#define RESET_VENCP		135
+/*				136	*/
+#define RESET_VDAC		137
+#define RESET_RTC		138
+/*				139	*/
+#define RESET_VDI6		140
+#define RESET_VENCL		141
+#define RESET_I2C_MASTER_2	142
+#define RESET_I2C_MASTER_1	143
+/*				144-159	*/
+/*	RESET5				*/
+/*				160-191	*/
+/*	RESET6				*/
+#define RESET_PERIPHS_GENERAL	192
+#define RESET_PERIPHS_SPICC	193
+#define RESET_PERIPHS_SMART_CARD	194
+#define RESET_PERIPHS_SAR_ADC	195
+#define RESET_PERIPHS_I2C_MASTER_0	196
+#define RESET_SANA		197
+/*				198	*/
+#define RESET_PERIPHS_STREAM_INTERFACE	199
+#define RESET_PERIPHS_SDIO	200
+#define RESET_PERIPHS_UART_0	201
+#define RESET_PERIPHS_UART_1_2	202
+#define RESET_PERIPHS_ASYNC_0	203
+#define RESET_PERIPHS_ASYNC_1	204
+#define RESET_PERIPHS_SPI_0	205
+#define RESET_PERIPHS_SDHC	206
+#define RESET_UART_SLIP		207
+/*				208-223	*/
+/*	RESET7				*/
+#define RESET_USB_DDR_0		224
+#define RESET_USB_DDR_1		225
+#define RESET_USB_DDR_2		226
+#define RESET_USB_DDR_3		227
+/*				228	*/
+#define RESET_DEVICE_MMC_ARB	229
+/*				230	*/
+#define RESET_VID_LOCK		231
+#define RESET_A9_DMC_PIPEL	232
+/*				233-255	*/
+
+#endif