diff mbox

[2/2] dt-bindings: clocksource: Add Add Oxford Semiconductor RPS Timer bindings

Message ID 1464688198-9655-3-git-send-email-narmstrong@baylibre.com (mailing list archive)
State New, archived
Headers show

Commit Message

Neil Armstrong May 31, 2016, 9:49 a.m. UTC
Add DT bindings for the Oxford Semiconductor RPS dual Timer.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 .../devicetree/bindings/timer/oxsemi,rps-timer.txt      | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/timer/oxsemi,rps-timer.txt

Comments

Rob Herring (Arm) June 2, 2016, 11:20 p.m. UTC | #1
On Tue, May 31, 2016 at 11:49:58AM +0200, Neil Armstrong wrote:
> Add DT bindings for the Oxford Semiconductor RPS dual Timer.
> 
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
> ---
>  .../devicetree/bindings/timer/oxsemi,rps-timer.txt      | 17 +++++++++++++++++
>  1 file changed, 17 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/timer/oxsemi,rps-timer.txt

Acked-by: Rob Herring <robh@kernel.org>
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/timer/oxsemi,rps-timer.txt b/Documentation/devicetree/bindings/timer/oxsemi,rps-timer.txt
new file mode 100644
index 0000000..3ca89cd
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/oxsemi,rps-timer.txt
@@ -0,0 +1,17 @@ 
+Oxford Semiconductor OXNAS SoCs Family RPS Timer
+================================================
+
+Required properties:
+- compatible: Should be "oxsemi,ox810se-rps-timer"
+- reg : Specifies base physical address and size of the registers.
+- interrupts : The interrupts of the two timers
+- clocks : The phandle of the timer clock source
+
+example:
+
+timer0: timer@200 {
+	compatible = "oxsemi,ox810se-rps-timer";
+	reg = <0x200 0x40>;
+	clocks = <&rpsclk>;
+	interrupts = <4 5>;
+};