@@ -14,7 +14,7 @@ Optional properties:
- clocks : a list of phandle + clock specifier pairs
- phys : phandle + phy specifier pair
- phy-names : "usb"
-- resets : phandle + reset specifier pair
+- resets : a list of phandle + reset specifier pairs
Example:
@@ -33,11 +33,12 @@
#define DRIVER_DESC "OHCI generic platform driver"
#define OHCI_MAX_CLKS 3
+#define OHCI_MAX_RESETS 2
#define hcd_to_ohci_priv(h) ((struct ohci_platform_priv *)hcd_to_ohci(h)->priv)
struct ohci_platform_priv {
struct clk *clks[OHCI_MAX_CLKS];
- struct reset_control *rst;
+ struct reset_control *resets[OHCI_MAX_RESETS];
struct phy **phys;
int num_phys;
};
@@ -117,7 +118,7 @@ static int ohci_platform_probe(struct platform_device *dev)
struct usb_ohci_pdata *pdata = dev_get_platdata(&dev->dev);
struct ohci_platform_priv *priv;
struct ohci_hcd *ohci;
- int err, irq, phy_num, clk = 0;
+ int err, irq, phy_num, clk = 0, rst = 0;
if (usb_disabled())
return -ENODEV;
@@ -195,19 +196,21 @@ static int ohci_platform_probe(struct platform_device *dev)
break;
}
}
-
- }
-
- priv->rst = devm_reset_control_get_optional(&dev->dev, NULL);
- if (IS_ERR(priv->rst)) {
- err = PTR_ERR(priv->rst);
- if (err == -EPROBE_DEFER)
- goto err_put_clks;
- priv->rst = NULL;
- } else {
- err = reset_control_deassert(priv->rst);
- if (err)
- goto err_put_clks;
+ for (rst = 0; rst < OHCI_MAX_RESETS; rst++) {
+ priv->resets[rst] =
+ devm_reset_control_get_shared_by_index(
+ &dev->dev, rst);
+ if (IS_ERR(priv->resets[rst])) {
+ err = PTR_ERR(priv->resets[rst]);
+ if (err == -EPROBE_DEFER)
+ goto err_reset;
+ priv->resets[rst] = NULL;
+ break;
+ }
+ err = reset_control_deassert(priv->resets[rst]);
+ if (err)
+ goto err_reset;
+ }
}
if (pdata->big_endian_desc)
@@ -265,8 +268,8 @@ err_power:
if (pdata->power_off)
pdata->power_off(dev);
err_reset:
- if (priv->rst)
- reset_control_assert(priv->rst);
+ while (--rst >= 0)
+ reset_control_assert(priv->resets[rst]);
err_put_clks:
while (--clk >= 0)
clk_put(priv->clks[clk]);
@@ -284,15 +287,15 @@ static int ohci_platform_remove(struct platform_device *dev)
struct usb_hcd *hcd = platform_get_drvdata(dev);
struct usb_ohci_pdata *pdata = dev_get_platdata(&dev->dev);
struct ohci_platform_priv *priv = hcd_to_ohci_priv(hcd);
- int clk;
+ int clk, rst;
usb_remove_hcd(hcd);
if (pdata->power_off)
pdata->power_off(dev);
- if (priv->rst)
- reset_control_assert(priv->rst);
+ for (rst = 0; rst < OHCI_MAX_RESETS && priv->resets[rst]; rst++)
+ reset_control_assert(priv->resets[rst]);
for (clk = 0; clk < OHCI_MAX_CLKS && priv->clks[clk]; clk++)
clk_put(priv->clks[clk]);
At least the EHCI/OHCI found on the Allwinnner H3 SoC needs multiple reset lines, the controller will not initialize while the reset for its companion is still asserted, which means we need to de-assert 2 resets for the controller to work. Signed-off-by: Hans de Goede <hdegoede@redhat.com> --- Changes in v2: -New patch in v2 of this patch-set, to complement the identical patch for the ehci-platform code --- Documentation/devicetree/bindings/usb/usb-ohci.txt | 2 +- drivers/usb/host/ohci-platform.c | 43 ++++++++++++---------- 2 files changed, 24 insertions(+), 21 deletions(-)