diff mbox

[12/14] regulator: pwm: Retrieve correct voltage

Message ID 1464942192-25967-13-git-send-email-boris.brezillon@free-electrons.com (mailing list archive)
State New, archived
Headers show

Commit Message

Boris BREZILLON June 3, 2016, 8:23 a.m. UTC
The continuous PWM voltage regulator is caching the voltage value in
the ->volt_uV field. While most of the time this value should reflect the
real voltage, sometime it can be sightly different if the PWM device
rounded the set_duty_cycle request.
Moreover, this value is not valid until someone has modified the regulator
output.

Remove the ->volt_uV field and always rely on the PWM state to calculate
the regulator output.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
---
Mark,

I know you already added your Tested-by/Acked-by tags on this patch
but this version has slightly change and is now making use of the
pwm_get_relative_duty_cycle() helper instead of manually converting
the absolute duty_cycle value into a relative one.
---
 drivers/regulator/pwm-regulator.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

Comments

Brian Norris June 3, 2016, 8:55 p.m. UTC | #1
On Fri, Jun 03, 2016 at 10:23:10AM +0200, Boris Brezillon wrote:
> The continuous PWM voltage regulator is caching the voltage value in
> the ->volt_uV field. While most of the time this value should reflect the
> real voltage, sometime it can be sightly different if the PWM device
> rounded the set_duty_cycle request.
> Moreover, this value is not valid until someone has modified the regulator
> output.
> 
> Remove the ->volt_uV field and always rely on the PWM state to calculate
> the regulator output.
> 
> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
> ---
> Mark,
> 
> I know you already added your Tested-by/Acked-by tags on this patch
> but this version has slightly change and is now making use of the
> pwm_get_relative_duty_cycle() helper instead of manually converting
> the absolute duty_cycle value into a relative one.
> ---
>  drivers/regulator/pwm-regulator.c | 12 ++++++------
>  1 file changed, 6 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/regulator/pwm-regulator.c b/drivers/regulator/pwm-regulator.c
> index 8c56e16..c39ecd1 100644
> --- a/drivers/regulator/pwm-regulator.c
> +++ b/drivers/regulator/pwm-regulator.c
> @@ -35,9 +35,6 @@ struct pwm_regulator_data {
>  	struct regulator_ops ops;
>  
>  	int state;
> -
> -	/* Continuous voltage */
> -	int volt_uV;
>  };
>  
>  struct pwm_voltages {
> @@ -135,8 +132,13 @@ static int pwm_regulator_is_enabled(struct regulator_dev *dev)
>  static int pwm_regulator_get_voltage(struct regulator_dev *rdev)
>  {
>  	struct pwm_regulator_data *drvdata = rdev_get_drvdata(rdev);
> +	int min_uV = rdev->constraints->min_uV;
> +	int diff = rdev->constraints->max_uV - min_uV;
> +	struct pwm_state pstate;
>  
> -	return drvdata->volt_uV;
> +	pwm_get_state(drvdata->pwm, &pstate);
> +
> +	return min_uV + pwm_get_relative_duty_cycle(&pstate, diff);
>  }
>  
>  static int pwm_regulator_set_voltage(struct regulator_dev *rdev,
> @@ -162,8 +164,6 @@ static int pwm_regulator_set_voltage(struct regulator_dev *rdev,
>  		return ret;
>  	}
>  
> -	drvdata->volt_uV = min_uV;
> -
>  	/* Delay required by PWM regulator to settle to the new voltage */
>  	usleep_range(ramp_delay, ramp_delay + 1000);
>  

Reviewed-by: Brian Norris <briannorris@chromium.org>
Tested-by: Brian Norris <briannorris@chromium.org>
diff mbox

Patch

diff --git a/drivers/regulator/pwm-regulator.c b/drivers/regulator/pwm-regulator.c
index 8c56e16..c39ecd1 100644
--- a/drivers/regulator/pwm-regulator.c
+++ b/drivers/regulator/pwm-regulator.c
@@ -35,9 +35,6 @@  struct pwm_regulator_data {
 	struct regulator_ops ops;
 
 	int state;
-
-	/* Continuous voltage */
-	int volt_uV;
 };
 
 struct pwm_voltages {
@@ -135,8 +132,13 @@  static int pwm_regulator_is_enabled(struct regulator_dev *dev)
 static int pwm_regulator_get_voltage(struct regulator_dev *rdev)
 {
 	struct pwm_regulator_data *drvdata = rdev_get_drvdata(rdev);
+	int min_uV = rdev->constraints->min_uV;
+	int diff = rdev->constraints->max_uV - min_uV;
+	struct pwm_state pstate;
 
-	return drvdata->volt_uV;
+	pwm_get_state(drvdata->pwm, &pstate);
+
+	return min_uV + pwm_get_relative_duty_cycle(&pstate, diff);
 }
 
 static int pwm_regulator_set_voltage(struct regulator_dev *rdev,
@@ -162,8 +164,6 @@  static int pwm_regulator_set_voltage(struct regulator_dev *rdev,
 		return ret;
 	}
 
-	drvdata->volt_uV = min_uV;
-
 	/* Delay required by PWM regulator to settle to the new voltage */
 	usleep_range(ramp_delay, ramp_delay + 1000);