diff mbox

[2/3] mtd: nand: sunxi: check ecc->size values

Message ID 1465214354-31493-3-git-send-email-boris.brezillon@free-electrons.com (mailing list archive)
State New, archived
Headers show

Commit Message

Boris BREZILLON June 6, 2016, 11:59 a.m. UTC
Verify that the ecc->size value is either 512 or 1024 bytes.
This should always be the case if this field was assigned to the
nand->ecc_step_size_ds value, but can be wrong when the user overloaded
this value with the nand-ecc-step-size DT property.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
---
 drivers/mtd/nand/sunxi_nand.c | 3 +++
 1 file changed, 3 insertions(+)
diff mbox

Patch

diff --git a/drivers/mtd/nand/sunxi_nand.c b/drivers/mtd/nand/sunxi_nand.c
index 4f5b4ad..252cbbf 100644
--- a/drivers/mtd/nand/sunxi_nand.c
+++ b/drivers/mtd/nand/sunxi_nand.c
@@ -1784,6 +1784,9 @@  static int sunxi_nand_hw_common_ecc_ctrl_init(struct mtd_info *mtd,
 	if (!data)
 		return -ENOMEM;
 
+	if (ecc->size != 512 && ecc->size != 1024)
+		return -EINVAL;
+
 	/* Prefer 1k ECC chunk over 512 ones */
 	if (ecc->size == 512 && mtd->writesize > 512) {
 		ecc->size = 1024;