| Message ID | 1465371386-14479-1-git-send-email-wens@csie.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Wed, Jun 08, 2016 at 03:36:26PM +0800, Chen-Yu Tsai wrote: > The switch is clearly labeled "power" on the board. > > The LED is red, and is lit by default through an external pull up. > Label it as "pwr" even though there is no explicit marking. > > Signed-off-by: Chen-Yu Tsai <wens@csie.org> > --- > > Hi Maxime, > > This patch fixes 2 copy paste errors in the bpi-m2+ dts that slipped > through. Can you squash it into my original patch? Done, thanks! Maxime
diff --git a/arch/arm/boot/dts/sun8i-h3-sinovoip-bpi-m2-plus.dts b/arch/arm/boot/dts/sun8i-h3-sinovoip-bpi-m2-plus.dts index 8a19b4b44f1f..8387c458d615 100644 --- a/arch/arm/boot/dts/sun8i-h3-sinovoip-bpi-m2-plus.dts +++ b/arch/arm/boot/dts/sun8i-h3-sinovoip-bpi-m2-plus.dts @@ -67,7 +67,7 @@ pinctrl-0 = <&pwr_led_bpi_m2p>; pwr_led { - label = "orangepi:green:pwr"; + label = "bpi-m2+:red:pwr"; gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */ default-state = "on"; }; @@ -79,7 +79,7 @@ pinctrl-0 = <&sw_r_bpi_m2p>; sw4 { - label = "sw4"; + label = "power"; linux,code = <BTN_0>; gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; };
The switch is clearly labeled "power" on the board. The LED is red, and is lit by default through an external pull up. Label it as "pwr" even though there is no explicit marking. Signed-off-by: Chen-Yu Tsai <wens@csie.org> --- Hi Maxime, This patch fixes 2 copy paste errors in the bpi-m2+ dts that slipped through. Can you squash it into my original patch? Thanks ChenYu --- arch/arm/boot/dts/sun8i-h3-sinovoip-bpi-m2-plus.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)