diff mbox

ARM: dts: sun8i-q8-common: Add support for USB wifi controllers

Message ID 1466015030-18091-1-git-send-email-hdegoede@redhat.com (mailing list archive)
State New, archived
Headers show

Commit Message

Hans de Goede June 15, 2016, 6:23 p.m. UTC 
Some of the sun8i q8 boards have an usb wifi controller, on other
variants this will result in an used usb root-hub, but the best
way to deal with wifi on this boards is to simply let the kernel
auto-detect usb or sdio wifi controllers.

This has been tested on an a23 based q8 tablet with a RTL8188ETV wifi
controller.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
 arch/arm/boot/dts/sun8i-q8-common.dtsi | 11 +++++++++++
 1 file changed, 11 insertions(+)

Comments

Maxime Ripard June 16, 2016, 8:19 a.m. UTC | #1 
On Wed, Jun 15, 2016 at 08:23:50PM +0200, Hans de Goede wrote:
> Some of the sun8i q8 boards have an usb wifi controller, on other
> variants this will result in an used usb root-hub, but the best
> way to deal with wifi on this boards is to simply let the kernel
> auto-detect usb or sdio wifi controllers.
> 
> This has been tested on an a23 based q8 tablet with a RTL8188ETV wifi
> controller.
> 
> Signed-off-by: Hans de Goede <hdegoede@redhat.com>

Applied, thanks.

Maxime
diff mbox

Patch

diff --git a/arch/arm/boot/dts/sun8i-q8-common.dtsi b/arch/arm/boot/dts/sun8i-q8-common.dtsi
index 991087f..f3f4ce0 100644
--- a/arch/arm/boot/dts/sun8i-q8-common.dtsi
+++ b/arch/arm/boot/dts/sun8i-q8-common.dtsi
@@ -63,6 +63,10 @@ 
 	};
 };
 
+&ehci0 {
+	status  = "okay";
+};
+
 &mmc0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_q8>;
@@ -171,6 +175,12 @@ 
 	regulator-name = "vcc-dram";
 };
 
+&reg_dldo1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
 &reg_drivevbus {
 	regulator-name = "usb0-vbus";
 	status = "okay";
@@ -205,5 +215,6 @@ 
 	usb0_id_det-gpio = <&pio 7 8 GPIO_ACTIVE_HIGH>; /* PH8 */
 	usb0_vbus_power-supply = <&usb_power_supply>;
 	usb0_vbus-supply = <&reg_drivevbus>;
+	usb1_vbus-supply = <&reg_dldo1>;
 	status = "okay";
 };