diff mbox

arm64: dts: rockchip: add the power domain node for rk3399

Message ID 1467251760-14695-1-git-send-email-wxt@rock-chips.com (mailing list archive)
State New, archived
Headers show

Commit Message

Caesar Wang June 30, 2016, 1:56 a.m. UTC
From: Elaine Zhang <zhangqing@rock-chips.com>

In order to meet low power requirements, a power management unit (PMU) is
designed for controlling power resources in RK3399. The RK3399 PMU is
dedicated for managing the power of the whole chip.

1. add pd node for RK3399 Soc
2. create power domain tree
3. add qos node for domain

From the DT/binds and driver can get more detail information:
The driver:
drivers/soc/rockchip/pm_domains.c
The document:
Documentation/devicetree/bindings/soc/rockchip/power_domain.txt

---

Tested on vop and gpu devices added for next kernel.
PD:
localhost / # cat sys/kernel/debug/pm_genpd/pm_genpd_summary
domain                          status          slaves
/device                                             runtime status
----------------------------------------------------------------------
pd_gpu                          on
/devices/platform/ff9a0000.gpu                      active
pd_vopl                         off
/devices/platform/ff8f0000.vop                      suspended
pd_vopb                         off
/devices/platform/ff900000.vop                      suspended
pd_vo                           off             pd_vopb, pd_vopl
pd_hdcp                         off
...
pd_iep                          off
pd_vcodec                       off
pd_vdu                          off

QOS:
localhost / # cat sys/kernel/debug/pm_qos/
cpu_dma_latency     network_latency
memory_bandwidth    network_throughput

Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
---
 arch/arm64/boot/dts/rockchip/rk3399.dtsi | 153 +++++++++++++++++++++++++++++++
 1 file changed, 153 insertions(+)

Comments

Doug Anderson June 30, 2016, 9:49 p.m. UTC | #1
Caesar,

On Wed, Jun 29, 2016 at 6:56 PM, Caesar Wang <wxt@rock-chips.com> wrote:
> From: Elaine Zhang <zhangqing@rock-chips.com>
>
> In order to meet low power requirements, a power management unit (PMU) is
> designed for controlling power resources in RK3399. The RK3399 PMU is
> dedicated for managing the power of the whole chip.
>
> 1. add pd node for RK3399 Soc
> 2. create power domain tree
> 3. add qos node for domain
>
> From the DT/binds and driver can get more detail information:
> The driver:
> drivers/soc/rockchip/pm_domains.c
> The document:
> Documentation/devicetree/bindings/soc/rockchip/power_domain.txt
>
> ---
>
> Tested on vop and gpu devices added for next kernel.
> PD:
> localhost / # cat sys/kernel/debug/pm_genpd/pm_genpd_summary

Nit: can you put a "/" before "sys" here and elsewhere in your patches?


> domain                          status          slaves
> /device                                             runtime status
> ----------------------------------------------------------------------
> pd_gpu                          on
> /devices/platform/ff9a0000.gpu                      active
> pd_vopl                         off
> /devices/platform/ff8f0000.vop                      suspended
> pd_vopb                         off
> /devices/platform/ff900000.vop                      suspended
> pd_vo                           off             pd_vopb, pd_vopl
> pd_hdcp                         off
> ...
> pd_iep                          off
> pd_vcodec                       off
> pd_vdu                          off
>
> QOS:
> localhost / # cat sys/kernel/debug/pm_qos/
> cpu_dma_latency     network_latency
> memory_bandwidth    network_throughput

What is this supposed to be showing exactly?  You can't "cat" a
directory, so maybe you meant "ls"?

Also, each of these files contains the string "Empty!" and these files
seem fairly unconnected to your patch.  Those files exist both before
and after your patch and nothing that I can see in the Rockchip QoS
stuff hooks up to the generic Linux QoS infrastructure.  The power
domains just save and restore the QoS--they don't actually allow
settting it.


> Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
> Signed-off-by: Caesar Wang <wxt@rock-chips.com>
> ---
>  arch/arm64/boot/dts/rockchip/rk3399.dtsi | 153 +++++++++++++++++++++++++++++++
>  1 file changed, 153 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
> index a6dd623..cc4035e 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
> +++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
> @@ -45,6 +45,7 @@
>  #include <dt-bindings/interrupt-controller/arm-gic.h>
>  #include <dt-bindings/interrupt-controller/irq.h>
>  #include <dt-bindings/pinctrl/rockchip.h>
> +#include <dt-bindings/power/rk3399-power.h>
>  #include <dt-bindings/thermal/thermal.h>
>
>  / {
> @@ -594,6 +595,158 @@
>                 status = "disabled";
>         };
>
> +       qos_gpu: qos_gpu@ffae0000 {
> +               compatible = "syscon";
> +               reg = <0x0 0xffae0000 0x0 0x20>;
> +       };
> +       qos_video_m0: qos_video_m0@ffab8000 {
> +               compatible = "syscon";
> +               reg = <0x0 0xffab8000 0x0 0x20>;
> +       };
> +       qos_video_m1_r: qos_video_m1_r@ffac0000 {
> +               compatible = "syscon";
> +               reg = <0x0 0xffac0000 0x0 0x20>;
> +       };
> +       qos_video_m1_w: qos_video_m1_w@ffac0080 {
> +               compatible = "syscon";
> +               reg = <0x0 0xffac0080 0x0 0x20>;
> +       };
> +       qos_rga_r: qos_rga_r@ffab0000 {
> +               compatible = "syscon";
> +               reg = <0x0 0xffab0000 0x0 0x20>;
> +       };
> +       qos_rga_w: qos_rga_w@ffab0080 {
> +               compatible = "syscon";
> +               reg = <0x0 0xffab0080 0x0 0x20>;
> +       };
> +       qos_iep: qos_iep@ffa98000 {
> +               compatible = "syscon";
> +               reg = <0x0 0xffa98000 0x0 0x20>;
> +       };
> +       qos_vop_big_r: qos_vop_big_r@ffac8000 {
> +               compatible = "syscon";
> +               reg = <0x0 0xffac8000 0x0 0x20>;
> +       };
> +       qos_vop_big_w: qos_vop_big_w@ffac8080 {
> +               compatible = "syscon";
> +               reg = <0x0 0xffac8080 0x0 0x20>;
> +       };
> +       qos_vop_little: qos_vop_little@ffad0000 {
> +               compatible = "syscon";
> +               reg = <0x0 0xffad0000 0x0 0x20>;
> +       };
> +       qos_isp0_m0: qos_isp0_m0@ffaa0000 {
> +               compatible = "syscon";
> +               reg = <0x0 0xffaa0000 0x0 0x20>;
> +       };
> +       qos_isp0_m1: qos_isp0_m1@ffaa0080 {
> +               compatible = "syscon";
> +               reg = <0x0 0xffaa0080 0x0 0x20>;
> +       };
> +       qos_isp1_m0: qos_isp1_m0@ffaa8000 {
> +               compatible = "syscon";
> +               reg = <0x0 0xffaa8000 0x0 0x20>;
> +       };
> +       qos_isp1_m1: qos_isp1_m1@ffaa8080 {
> +               compatible = "syscon";
> +               reg = <0x0 0xffaa8080 0x0 0x20>;
> +       };
> +       qos_hdcp: qos_hdcp@ffa90000 {
> +               compatible = "syscon";
> +               reg = <0x0 0xffa90000 0x0 0x20>;
> +       };

A bit of a nit that your sorting is a bit random here.  I know that
your sorting order seems to match the TRM, but really we should just
sort by base address.

Speaking of the TRM, it seems like some entries are missing.  QOS for
everything above the GPU (like usb host1, for instance) is missing.
Similarly the 3 entries in the TRM listed after hdcp.  Should we put
them all in so that we have them later if/when we need them?


> +       pmu: power-management@ff310000 {
> +               compatible = "rockchip,rk3399-pmu", "syscon", "simple-mfd";
> +               reg = <0x0 0xff310000 0x0 0x1000>;
> +
> +               power: power-controller {
> +                       status = "okay";
> +                       compatible = "rockchip,rk3399-power-controller";
> +                       #power-domain-cells = <1>;
> +                       #address-cells = <1>;
> +                       #size-cells = <0>;
> +
> +                       pd_vdu {
> +                               reg = <RK3399_PD_VDU>;
> +                               clocks = <&cru ACLK_VDU>,
> +                                        <&cru HCLK_VDU>;
> +                               pm_qos = <&qos_video_m1_r>,
> +                                        <&qos_video_m1_w>;
> +                       };
> +                       pd_vcodec {
> +                               reg = <RK3399_PD_VCODEC>;
> +                               clocks = <&cru ACLK_VCODEC>,
> +                                        <&cru HCLK_VCODEC>;
> +                               pm_qos = <&qos_video_m0>;
> +                       };
> +                       pd_iep {
> +                               reg = <RK3399_PD_IEP>;
> +                               clocks = <&cru ACLK_IEP>,
> +                                        <&cru HCLK_IEP>;
> +                               pm_qos = <&qos_iep>;
> +                       };
> +                       pd_rga {
> +                               reg = <RK3399_PD_RGA>;
> +                               clocks = <&cru ACLK_RGA>,
> +                                        <&cru HCLK_RGA>;
> +                               pm_qos = <&qos_rga_r>,
> +                                        <&qos_rga_w>;
> +                       };
> +                       pd_vio {
> +                               reg = <RK3399_PD_VIO>;
> +                               #address-cells = <1>;
> +                               #size-cells = <0>;
> +
> +                               pd_isp0 {
> +                                       reg = <RK3399_PD_ISP0>;
> +                                       clocks = <&cru ACLK_ISP0>,
> +                                                <&cru HCLK_ISP0>;
> +                                       pm_qos = <&qos_isp0_m0>,
> +                                                <&qos_isp0_m1>;
> +                               };
> +                               pd_isp1 {
> +                                       reg = <RK3399_PD_ISP1>;
> +                                       clocks = <&cru ACLK_ISP1>,
> +                                                <&cru HCLK_ISP1>;
> +                                       pm_qos = <&qos_isp1_m0>,
> +                                                <&qos_isp1_m1>;
> +                               };
> +                               pd_hdcp {
> +                                       reg = <RK3399_PD_HDCP>;
> +                                       clocks = <&cru ACLK_HDCP>,
> +                                                <&cru HCLK_HDCP>,
> +                                                <&cru PCLK_HDCP>;
> +                                       pm_qos = <&qos_hdcp>;
> +                               };
> +                               pd_vo {
> +                                       reg = <RK3399_PD_VO>;
> +                                       #address-cells = <1>;
> +                                       #size-cells = <0>;
> +
> +                                       pd_vopb {
> +                                               reg = <RK3399_PD_VOPB>;
> +                                               clocks = <&cru ACLK_VOP0>,
> +                                                        <&cru HCLK_VOP0>;
> +                                               pm_qos = <&qos_vop_big_r>,
> +                                                        <&qos_vop_big_w>;
> +                                       };
> +                                       pd_vopl {
> +                                               reg = <RK3399_PD_VOPL>;
> +                                               clocks = <&cru ACLK_VOP1>,
> +                                                        <&cru HCLK_VOP1>;
> +                                               pm_qos = <&qos_vop_little>;
> +                                       };
> +                               };
> +                       };
> +                       pd_gpu {
> +                               reg = <RK3399_PD_GPU>;
> +                               clocks = <&cru ACLK_GPU>;
> +                               pm_qos = <&qos_gpu>;
> +                       };

Again a nitty sort order question.  Is there a reason not to make
things alphabetical?  AKA: pd_gpu, pd_iep, pd_rga, ...

...and inside pd_vio should be alphabetical too?

In the TRM it looks like some of the power domains are grouped
together (like all the domains under LOGIC or CENTERLOGIC).  If
keeping that grouping makes sense here then you should add a comment
at the start of each group and sort the groups sanely (and sort within
each group).

It looks like there are also more power domains that you haven't
listed here (like PD_GMAC, for instance, or PD_CORE_L).  Are you
planning to add those in a followon patch?



-Doug
Heiko Stuebner June 30, 2016, 9:57 p.m. UTC | #2
Am Donnerstag, 30. Juni 2016, 14:49:41 schrieb Doug Anderson:
> Caesar,
> 
> On Wed, Jun 29, 2016 at 6:56 PM, Caesar Wang <wxt@rock-chips.com> wrote:
> > From: Elaine Zhang <zhangqing@rock-chips.com>
> > 
> > In order to meet low power requirements, a power management unit (PMU)
> > is
> > designed for controlling power resources in RK3399. The RK3399 PMU is
> > dedicated for managing the power of the whole chip.
> > 
> > 1. add pd node for RK3399 Soc
> > 2. create power domain tree
> > 3. add qos node for domain
> > 
> > From the DT/binds and driver can get more detail information:
> > The driver:
> > drivers/soc/rockchip/pm_domains.c
> > The document:
> > Documentation/devicetree/bindings/soc/rockchip/power_domain.txt
> > 
> > ---
> > 
> > Tested on vop and gpu devices added for next kernel.
> > PD:
> > localhost / # cat sys/kernel/debug/pm_genpd/pm_genpd_summary
> 
> Nit: can you put a "/" before "sys" here and elsewhere in your patches?
> 
> > domain                          status          slaves
> > /device                                             runtime status
> > ----------------------------------------------------------------------
> > pd_gpu                          on
> > /devices/platform/ff9a0000.gpu                      active
> > pd_vopl                         off
> > /devices/platform/ff8f0000.vop                      suspended
> > pd_vopb                         off
> > /devices/platform/ff900000.vop                      suspended
> > pd_vo                           off             pd_vopb, pd_vopl
> > pd_hdcp                         off
> > ...
> > pd_iep                          off
> > pd_vcodec                       off
> > pd_vdu                          off
> > 
> > QOS:
> > localhost / # cat sys/kernel/debug/pm_qos/
> > cpu_dma_latency     network_latency
> > memory_bandwidth    network_throughput
> 
> What is this supposed to be showing exactly?  You can't "cat" a
> directory, so maybe you meant "ls"?
> 
> Also, each of these files contains the string "Empty!" and these files
> seem fairly unconnected to your patch.  Those files exist both before
> and after your patch and nothing that I can see in the Rockchip QoS
> stuff hooks up to the generic Linux QoS infrastructure.  The power
> domains just save and restore the QoS--they don't actually allow
> settting it.

personally, I would just drop that debugfs-dump, as I don't see what we gain 
from it :-).

> 
> > Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
> > Signed-off-by: Caesar Wang <wxt@rock-chips.com>
> > ---

[...]

> > +       pmu: power-management@ff310000 {
> > +               compatible = "rockchip,rk3399-pmu", "syscon",
> > "simple-mfd"; +               reg = <0x0 0xff310000 0x0 0x1000>;
> > +
> > +               power: power-controller {
> > +                       status = "okay";
> > +                       compatible = "rockchip,rk3399-power-controller";
> > +                       #power-domain-cells = <1>;
> > +                       #address-cells = <1>;
> > +                       #size-cells = <0>;
> > +
> > +                       pd_vdu {
> > +                               reg = <RK3399_PD_VDU>;
> > +                               clocks = <&cru ACLK_VDU>,
> > +                                        <&cru HCLK_VDU>;
> > +                               pm_qos = <&qos_video_m1_r>,
> > +                                        <&qos_video_m1_w>;
> > +                       };
> > +                       pd_vcodec {
> > +                               reg = <RK3399_PD_VCODEC>;
> > +                               clocks = <&cru ACLK_VCODEC>,
> > +                                        <&cru HCLK_VCODEC>;
> > +                               pm_qos = <&qos_video_m0>;
> > +                       };
> > +                       pd_iep {
> > +                               reg = <RK3399_PD_IEP>;
> > +                               clocks = <&cru ACLK_IEP>,
> > +                                        <&cru HCLK_IEP>;
> > +                               pm_qos = <&qos_iep>;
> > +                       };
> > +                       pd_rga {
> > +                               reg = <RK3399_PD_RGA>;
> > +                               clocks = <&cru ACLK_RGA>,
> > +                                        <&cru HCLK_RGA>;
> > +                               pm_qos = <&qos_rga_r>,
> > +                                        <&qos_rga_w>;
> > +                       };
> > +                       pd_vio {
> > +                               reg = <RK3399_PD_VIO>;
> > +                               #address-cells = <1>;
> > +                               #size-cells = <0>;
> > +
> > +                               pd_isp0 {
> > +                                       reg = <RK3399_PD_ISP0>;
> > +                                       clocks = <&cru ACLK_ISP0>,
> > +                                                <&cru HCLK_ISP0>;
> > +                                       pm_qos = <&qos_isp0_m0>,
> > +                                                <&qos_isp0_m1>;
> > +                               };
> > +                               pd_isp1 {
> > +                                       reg = <RK3399_PD_ISP1>;
> > +                                       clocks = <&cru ACLK_ISP1>,
> > +                                                <&cru HCLK_ISP1>;
> > +                                       pm_qos = <&qos_isp1_m0>,
> > +                                                <&qos_isp1_m1>;
> > +                               };
> > +                               pd_hdcp {
> > +                                       reg = <RK3399_PD_HDCP>;
> > +                                       clocks = <&cru ACLK_HDCP>,
> > +                                                <&cru HCLK_HDCP>,
> > +                                                <&cru PCLK_HDCP>;
> > +                                       pm_qos = <&qos_hdcp>;
> > +                               };
> > +                               pd_vo {
> > +                                       reg = <RK3399_PD_VO>;
> > +                                       #address-cells = <1>;
> > +                                       #size-cells = <0>;
> > +
> > +                                       pd_vopb {
> > +                                               reg = <RK3399_PD_VOPB>;
> > +                                               clocks = <&cru
> > ACLK_VOP0>, +                                                       
> > <&cru HCLK_VOP0>; +                                              
> > pm_qos = <&qos_vop_big_r>, +                                           
> >             <&qos_vop_big_w>; +                                      
> > };
> > +                                       pd_vopl {
> > +                                               reg = <RK3399_PD_VOPL>;
> > +                                               clocks = <&cru
> > ACLK_VOP1>, +                                                       
> > <&cru HCLK_VOP1>; +                                              
> > pm_qos = <&qos_vop_little>; +                                       };
> > +                               };
> > +                       };
> > +                       pd_gpu {
> > +                               reg = <RK3399_PD_GPU>;
> > +                               clocks = <&cru ACLK_GPU>;
> > +                               pm_qos = <&qos_gpu>;
> > +                       };
> 
> Again a nitty sort order question.  Is there a reason not to make
> things alphabetical?  AKA: pd_gpu, pd_iep, pd_rga, ...
> 
> ...and inside pd_vio should be alphabetical too?
> 
> In the TRM it looks like some of the power domains are grouped
> together (like all the domains under LOGIC or CENTERLOGIC).  If
> keeping that grouping makes sense here then you should add a comment
> at the start of each group and sort the groups sanely (and sort within
> each group).
> 
> It looks like there are also more power domains that you haven't
> listed here (like PD_GMAC, for instance, or PD_CORE_L).  Are you
> planning to add those in a followon patch?

that reminds me, nodes with a reg property should have the base address in 
the node name as well. Using the constant works nicely, as can be seen on 
the rk3288 where we have for example:

	pd_vio@RK3288_PD_VIO


Heiko
Doug Anderson June 30, 2016, 10:32 p.m. UTC | #3
Hi,

On Thu, Jun 30, 2016 at 2:57 PM, Heiko Stuebner <heiko@sntech.de> wrote:
>> It looks like there are also more power domains that you haven't
>> listed here (like PD_GMAC, for instance, or PD_CORE_L).  Are you
>> planning to add those in a followon patch?
>
> that reminds me, nodes with a reg property should have the base address in
> the node name as well. Using the constant works nicely, as can be seen on
> the rk3288 where we have for example:
>
>         pd_vio@RK3288_PD_VIO

I was wondering about that.  The device tree bindings are similarly
missing the reg from the example.

I'm curious: for sorting purposes, are you supposed to know the
underlying integer and use that for sorting, or sort by the name of
the #define?

-Doug
Heiko Stuebner June 30, 2016, 10:50 p.m. UTC | #4
Am Donnerstag, 30. Juni 2016, 15:32:01 schrieb Doug Anderson:
> Hi,
> 
> On Thu, Jun 30, 2016 at 2:57 PM, Heiko Stuebner <heiko@sntech.de> wrote:
> >> It looks like there are also more power domains that you haven't
> >> listed here (like PD_GMAC, for instance, or PD_CORE_L).  Are you
> >> planning to add those in a followon patch?
> > 
> > that reminds me, nodes with a reg property should have the base address
> > in the node name as well. Using the constant works nicely, as can be
> > seen on> 
> > the rk3288 where we have for example:
> >         pd_vio@RK3288_PD_VIO
> 
> I was wondering about that.  The device tree bindings are similarly
> missing the reg from the example.
> 
> I'm curious: for sorting purposes, are you supposed to know the
> underlying integer and use that for sorting, or sort by the name of
> the #define?

requiring the underlying integer sounds very cumbersome, especially as the 
sorting is only a style-thing. So personally I'd take the constants name as 
sorting criteria, as everything else would be somewhat counter-intuitive.

Heiko
Caesar Wang July 1, 2016, 2:11 a.m. UTC | #5
Thanks your reviewing!

On 2016年07月01日 05:57, Heiko Stuebner wrote:
> Am Donnerstag, 30. Juni 2016, 14:49:41 schrieb Doug Anderson:
>> Caesar,
>>
>> On Wed, Jun 29, 2016 at 6:56 PM, Caesar Wang <wxt@rock-chips.com> wrote:
>>> From: Elaine Zhang <zhangqing@rock-chips.com>
>>>
>>> In order to meet low power requirements, a power management unit (PMU)
>>> is
>>> designed for controlling power resources in RK3399. The RK3399 PMU is
>>> dedicated for managing the power of the whole chip.
>>>
>>> 1. add pd node for RK3399 Soc
>>> 2. create power domain tree
>>> 3. add qos node for domain
>>>
>>>  From the DT/binds and driver can get more detail information:
>>> The driver:
>>> drivers/soc/rockchip/pm_domains.c
>>> The document:
>>> Documentation/devicetree/bindings/soc/rockchip/power_domain.txt
>>>
>>> ---
>>>
>>> Tested on vop and gpu devices added for next kernel.
>>> PD:
>>> localhost / # cat sys/kernel/debug/pm_genpd/pm_genpd_summary
>> Nit: can you put a "/" before "sys" here and elsewhere in your patches?
>>
>>> domain                          status          slaves
>>> /device                                             runtime status
>>> ----------------------------------------------------------------------
>>> pd_gpu                          on
>>> /devices/platform/ff9a0000.gpu                      active
>>> pd_vopl                         off
>>> /devices/platform/ff8f0000.vop                      suspended
>>> pd_vopb                         off
>>> /devices/platform/ff900000.vop                      suspended
>>> pd_vo                           off             pd_vopb, pd_vopl
>>> pd_hdcp                         off
>>> ...
>>> pd_iep                          off
>>> pd_vcodec                       off
>>> pd_vdu                          off
>>>
>>> QOS:
>>> localhost / # cat sys/kernel/debug/pm_qos/
>>> cpu_dma_latency     network_latency
>>> memory_bandwidth    network_throughput
>> What is this supposed to be showing exactly?  You can't "cat" a
>> directory, so maybe you meant "ls"?
>>
>> Also, each of these files contains the string "Empty!" and these files
>> seem fairly unconnected to your patch.  Those files exist both before
>> and after your patch and nothing that I can see in the Rockchip QoS
>> stuff hooks up to the generic Linux QoS infrastructure.  The power
>> domains just save and restore the QoS--they don't actually allow
>> settting it.
> personally, I would just drop that debugfs-dump, as I don't see what we gain
> from it :-).

Agreed, drop it.

>>> Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
>>> Signed-off-by: Caesar Wang <wxt@rock-chips.com>
>>> ---
> [...]
>
>>> +       pmu: power-management@ff310000 {
>>> +               compatible = "rockchip,rk3399-pmu", "syscon",
>>> "simple-mfd"; +               reg = <0x0 0xff310000 0x0 0x1000>;
>>> +
>>> +               power: power-controller {
>>> +                       status = "okay";
>>> +                       compatible = "rockchip,rk3399-power-controller";
>>> +                       #power-domain-cells = <1>;
>>> +                       #address-cells = <1>;
>>> +                       #size-cells = <0>;
>>> +
>>> +                       pd_vdu {
>>> +                               reg = <RK3399_PD_VDU>;
>>> +                               clocks = <&cru ACLK_VDU>,
>>> +                                        <&cru HCLK_VDU>;
>>> +                               pm_qos = <&qos_video_m1_r>,
>>> +                                        <&qos_video_m1_w>;
>>> +                       };
>>> +                       pd_vcodec {
>>> +                               reg = <RK3399_PD_VCODEC>;
>>> +                               clocks = <&cru ACLK_VCODEC>,
>>> +                                        <&cru HCLK_VCODEC>;
>>> +                               pm_qos = <&qos_video_m0>;
>>> +                       };
>>> +                       pd_iep {
>>> +                               reg = <RK3399_PD_IEP>;
>>> +                               clocks = <&cru ACLK_IEP>,
>>> +                                        <&cru HCLK_IEP>;
>>> +                               pm_qos = <&qos_iep>;
>>> +                       };
>>> +                       pd_rga {
>>> +                               reg = <RK3399_PD_RGA>;
>>> +                               clocks = <&cru ACLK_RGA>,
>>> +                                        <&cru HCLK_RGA>;
>>> +                               pm_qos = <&qos_rga_r>,
>>> +                                        <&qos_rga_w>;
>>> +                       };
>>> +                       pd_vio {
>>> +                               reg = <RK3399_PD_VIO>;
>>> +                               #address-cells = <1>;
>>> +                               #size-cells = <0>;
>>> +
>>> +                               pd_isp0 {
>>> +                                       reg = <RK3399_PD_ISP0>;
>>> +                                       clocks = <&cru ACLK_ISP0>,
>>> +                                                <&cru HCLK_ISP0>;
>>> +                                       pm_qos = <&qos_isp0_m0>,
>>> +                                                <&qos_isp0_m1>;
>>> +                               };
>>> +                               pd_isp1 {
>>> +                                       reg = <RK3399_PD_ISP1>;
>>> +                                       clocks = <&cru ACLK_ISP1>,
>>> +                                                <&cru HCLK_ISP1>;
>>> +                                       pm_qos = <&qos_isp1_m0>,
>>> +                                                <&qos_isp1_m1>;
>>> +                               };
>>> +                               pd_hdcp {
>>> +                                       reg = <RK3399_PD_HDCP>;
>>> +                                       clocks = <&cru ACLK_HDCP>,
>>> +                                                <&cru HCLK_HDCP>,
>>> +                                                <&cru PCLK_HDCP>;
>>> +                                       pm_qos = <&qos_hdcp>;
>>> +                               };
>>> +                               pd_vo {
>>> +                                       reg = <RK3399_PD_VO>;
>>> +                                       #address-cells = <1>;
>>> +                                       #size-cells = <0>;
>>> +
>>> +                                       pd_vopb {
>>> +                                               reg = <RK3399_PD_VOPB>;
>>> +                                               clocks = <&cru
>>> ACLK_VOP0>, +
>>> <&cru HCLK_VOP0>; +
>>> pm_qos = <&qos_vop_big_r>, +
>>>              <&qos_vop_big_w>; +
>>> };
>>> +                                       pd_vopl {
>>> +                                               reg = <RK3399_PD_VOPL>;
>>> +                                               clocks = <&cru
>>> ACLK_VOP1>, +
>>> <&cru HCLK_VOP1>; +
>>> pm_qos = <&qos_vop_little>; +                                       };
>>> +                               };
>>> +                       };
>>> +                       pd_gpu {
>>> +                               reg = <RK3399_PD_GPU>;
>>> +                               clocks = <&cru ACLK_GPU>;
>>> +                               pm_qos = <&qos_gpu>;
>>> +                       };
>> Again a nitty sort order question.  Is there a reason not to make
>> things alphabetical?  AKA: pd_gpu, pd_iep, pd_rga, ...
>>
>> ...and inside pd_vio should be alphabetical too?
>>
>> In the TRM it looks like some of the power domains are grouped
>> together (like all the domains under LOGIC or CENTERLOGIC).  If
>> keeping that grouping makes sense here then you should add a comment
>> at the start of each group and sort the groups sanely (and sort within
>> each group).

Okay, let me see it.

Thanks!

>>
>> It looks like there are also more power domains that you haven't
>> listed here (like PD_GMAC, for instance, or PD_CORE_L).  Are you
>> planning to add those in a followon patch?
> that reminds me, nodes with a reg property should have the base address in
> the node name as well. Using the constant works nicely, as can be seen on
> the rk3288 where we have for example:
>
> 	pd_vio@RK3288_PD_VIO

Agreed.


>
>
> Heiko
>
>
>
diff mbox

Patch

diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
index a6dd623..cc4035e 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
@@ -45,6 +45,7 @@ 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/power/rk3399-power.h>
 #include <dt-bindings/thermal/thermal.h>
 
 / {
@@ -594,6 +595,158 @@ 
 		status = "disabled";
 	};
 
+	qos_gpu: qos_gpu@ffae0000 {
+		compatible = "syscon";
+		reg = <0x0 0xffae0000 0x0 0x20>;
+	};
+	qos_video_m0: qos_video_m0@ffab8000 {
+		compatible = "syscon";
+		reg = <0x0 0xffab8000 0x0 0x20>;
+	};
+	qos_video_m1_r: qos_video_m1_r@ffac0000 {
+		compatible = "syscon";
+		reg = <0x0 0xffac0000 0x0 0x20>;
+	};
+	qos_video_m1_w: qos_video_m1_w@ffac0080 {
+		compatible = "syscon";
+		reg = <0x0 0xffac0080 0x0 0x20>;
+	};
+	qos_rga_r: qos_rga_r@ffab0000 {
+		compatible = "syscon";
+		reg = <0x0 0xffab0000 0x0 0x20>;
+	};
+	qos_rga_w: qos_rga_w@ffab0080 {
+		compatible = "syscon";
+		reg = <0x0 0xffab0080 0x0 0x20>;
+	};
+	qos_iep: qos_iep@ffa98000 {
+		compatible = "syscon";
+		reg = <0x0 0xffa98000 0x0 0x20>;
+	};
+	qos_vop_big_r: qos_vop_big_r@ffac8000 {
+		compatible = "syscon";
+		reg = <0x0 0xffac8000 0x0 0x20>;
+	};
+	qos_vop_big_w: qos_vop_big_w@ffac8080 {
+		compatible = "syscon";
+		reg = <0x0 0xffac8080 0x0 0x20>;
+	};
+	qos_vop_little: qos_vop_little@ffad0000 {
+		compatible = "syscon";
+		reg = <0x0 0xffad0000 0x0 0x20>;
+	};
+	qos_isp0_m0: qos_isp0_m0@ffaa0000 {
+		compatible = "syscon";
+		reg = <0x0 0xffaa0000 0x0 0x20>;
+	};
+	qos_isp0_m1: qos_isp0_m1@ffaa0080 {
+		compatible = "syscon";
+		reg = <0x0 0xffaa0080 0x0 0x20>;
+	};
+	qos_isp1_m0: qos_isp1_m0@ffaa8000 {
+		compatible = "syscon";
+		reg = <0x0 0xffaa8000 0x0 0x20>;
+	};
+	qos_isp1_m1: qos_isp1_m1@ffaa8080 {
+		compatible = "syscon";
+		reg = <0x0 0xffaa8080 0x0 0x20>;
+	};
+	qos_hdcp: qos_hdcp@ffa90000 {
+		compatible = "syscon";
+		reg = <0x0 0xffa90000 0x0 0x20>;
+	};
+
+	pmu: power-management@ff310000 {
+		compatible = "rockchip,rk3399-pmu", "syscon", "simple-mfd";
+		reg = <0x0 0xff310000 0x0 0x1000>;
+
+		power: power-controller {
+			status = "okay";
+			compatible = "rockchip,rk3399-power-controller";
+			#power-domain-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			pd_vdu {
+				reg = <RK3399_PD_VDU>;
+				clocks = <&cru ACLK_VDU>,
+					 <&cru HCLK_VDU>;
+				pm_qos = <&qos_video_m1_r>,
+					 <&qos_video_m1_w>;
+			};
+			pd_vcodec {
+				reg = <RK3399_PD_VCODEC>;
+				clocks = <&cru ACLK_VCODEC>,
+					 <&cru HCLK_VCODEC>;
+				pm_qos = <&qos_video_m0>;
+			};
+			pd_iep {
+				reg = <RK3399_PD_IEP>;
+				clocks = <&cru ACLK_IEP>,
+					 <&cru HCLK_IEP>;
+				pm_qos = <&qos_iep>;
+			};
+			pd_rga {
+				reg = <RK3399_PD_RGA>;
+				clocks = <&cru ACLK_RGA>,
+					 <&cru HCLK_RGA>;
+				pm_qos = <&qos_rga_r>,
+					 <&qos_rga_w>;
+			};
+			pd_vio {
+				reg = <RK3399_PD_VIO>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				pd_isp0 {
+					reg = <RK3399_PD_ISP0>;
+					clocks = <&cru ACLK_ISP0>,
+						 <&cru HCLK_ISP0>;
+					pm_qos = <&qos_isp0_m0>,
+						 <&qos_isp0_m1>;
+				};
+				pd_isp1 {
+					reg = <RK3399_PD_ISP1>;
+					clocks = <&cru ACLK_ISP1>,
+						 <&cru HCLK_ISP1>;
+					pm_qos = <&qos_isp1_m0>,
+						 <&qos_isp1_m1>;
+				};
+				pd_hdcp {
+					reg = <RK3399_PD_HDCP>;
+					clocks = <&cru ACLK_HDCP>,
+						 <&cru HCLK_HDCP>,
+						 <&cru PCLK_HDCP>;
+					pm_qos = <&qos_hdcp>;
+				};
+				pd_vo {
+					reg = <RK3399_PD_VO>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					pd_vopb {
+						reg = <RK3399_PD_VOPB>;
+						clocks = <&cru ACLK_VOP0>,
+							 <&cru HCLK_VOP0>;
+						pm_qos = <&qos_vop_big_r>,
+							 <&qos_vop_big_w>;
+					};
+					pd_vopl {
+						reg = <RK3399_PD_VOPL>;
+						clocks = <&cru ACLK_VOP1>,
+							 <&cru HCLK_VOP1>;
+						pm_qos = <&qos_vop_little>;
+					};
+				};
+			};
+			pd_gpu {
+				reg = <RK3399_PD_GPU>;
+				clocks = <&cru ACLK_GPU>;
+				pm_qos = <&qos_gpu>;
+			};
+		};
+	};
+
 	pmugrf: syscon@ff320000 {
 		compatible = "rockchip,rk3399-pmugrf", "syscon", "simple-mfd";
 		reg = <0x0 0xff320000 0x0 0x1000>;