diff mbox

[v2,7/7] clk: exynos5433: remove CLK_IGNORE_UNUSED flag from SPI clocks

Message ID 1467989201-14661-8-git-send-email-andi.shyti@samsung.com (mailing list archive)
State New, archived
Headers show

Commit Message

Andi Shyti July 8, 2016, 2:46 p.m. UTC
Because the Exynos5433 SPI driver supports the ioclk handling and
the following patch:

  http://marc.info/?l=linux-kernel&m=146787645626318&w=2

fixes a synchronus abort issue, none of the SPI clocks require
any critical handling: remove, then, the CLK_IGNORE_UNUSED flag
for the SPI related clocks.

Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
---
 drivers/clk/samsung/clk-exynos5433.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

Comments

On 07/08/2016 04:46 PM, Andi Shyti wrote:
> Because the Exynos5433 SPI driver supports the ioclk handling and
> the following patch:
> 
>   http://marc.info/?l=linux-kernel&m=146787645626318&w=2
> 
> fixes a synchronus abort issue, none of the SPI clocks require
s/synchronus/synchronous

> any critical handling: remove, then, the CLK_IGNORE_UNUSED flag
> for the SPI related clocks.
> 
> Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>

In case this goes through the spi tree:
Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
diff mbox

Patch

diff --git a/drivers/clk/samsung/clk-exynos5433.c b/drivers/clk/samsung/clk-exynos5433.c
index c3a5318..fb19525 100644
--- a/drivers/clk/samsung/clk-exynos5433.c
+++ b/drivers/clk/samsung/clk-exynos5433.c
@@ -1661,8 +1661,7 @@  static struct samsung_gate_clock peric_gate_clks[] __initdata = {
 	GATE(CLK_SCLK_IOCLK_SPI2, "sclk_ioclk_spi2", "ioclk_spi2_clk_in",
 			ENABLE_SCLK_PERIC, 13, CLK_SET_RATE_PARENT, 0),
 	GATE(CLK_SCLK_IOCLK_SPI1, "sclk_ioclk_spi1", "ioclk_spi1_clk_in",
-			ENABLE_SCLK_PERIC, 12,
-			CLK_IGNORE_UNUSED | CLK_SET_RATE_PARENT, 0),
+			ENABLE_SCLK_PERIC, 12, CLK_SET_RATE_PARENT, 0),
 	GATE(CLK_SCLK_IOCLK_SPI0, "sclk_ioclk_spi0", "ioclk_spi0_clk_in",
 			ENABLE_SCLK_PERIC, 11, CLK_SET_RATE_PARENT, 0),
 	GATE(CLK_SCLK_IOCLK_I2S1_BCLK, "sclk_ioclk_i2s1_bclk",
@@ -1677,7 +1676,7 @@  static struct samsung_gate_clock peric_gate_clks[] __initdata = {
 	GATE(CLK_SCLK_SPI2, "sclk_spi2", "sclk_spi2_peric", ENABLE_SCLK_PERIC,
 			5, CLK_SET_RATE_PARENT, 0),
 	GATE(CLK_SCLK_SPI1, "sclk_spi1", "sclk_spi1_peric", ENABLE_SCLK_PERIC,
-			4, CLK_IGNORE_UNUSED | CLK_SET_RATE_PARENT, 0),
+			4, CLK_SET_RATE_PARENT, 0),
 	GATE(CLK_SCLK_SPI0, "sclk_spi0", "sclk_spi0_peric", ENABLE_SCLK_PERIC,
 			3, CLK_SET_RATE_PARENT, 0),
 	GATE(CLK_SCLK_UART2, "sclk_uart2", "sclk_uart2_peric",