@@ -493,7 +493,14 @@ static inline int nic_get_node_id(struct pci_dev *pdev)
static inline bool pass1_silicon(struct pci_dev *pdev)
{
- return pdev->revision < 8;
+ return (pdev->revision < 8) &&
+ (pdev->subsystem_device == PCI_SUBSYS_DEVID_88XX_NIC_PF);
+}
+
+static inline bool pass2_silicon(struct pci_dev *pdev)
+{
+ return (pdev->revision >= 8) &&
+ (pdev->subsystem_device == PCI_SUBSYS_DEVID_88XX_NIC_PF);
}
int nicvf_set_real_num_queues(struct net_device *netdev,
@@ -799,6 +799,13 @@ static void nic_handle_mbx_intr(struct nicpf *nic, int vf)
(mbx.rq.qs_num << NIC_QS_ID_SHIFT) |
(mbx.rq.rq_num << NIC_Q_NUM_SHIFT);
nic_reg_write(nic, reg_addr, mbx.rq.cfg);
+ /* Enable CQE_RX2_S extension in CQE_RX descriptor.
+ * This gets appended by default on 81xx/83xx chips,
+ * for consistency enabling the same on 88xx pass2
+ * where this is introduced.
+ */
+ if (pass2_silicon(nic->pdev))
+ nic_reg_write(nic, NIC_PF_RX_CFG, 0x01);
break;
case NIC_MBOX_MSG_RQ_BP_CFG:
reg_addr = NIC_PF_QSET_0_127_RQ_0_7_BP_CFG |
@@ -36,6 +36,7 @@
#define NIC_PF_MAILBOX_ENA_W1C (0x0450)
#define NIC_PF_MAILBOX_ENA_W1S (0x0470)
#define NIC_PF_RX_ETYPE_0_7 (0x0500)
+#define NIC_PF_RX_CFG (0x05D0)
#define NIC_PF_PKIND_0_15_CFG (0x0600)
#define NIC_PF_ECC0_FLIP0 (0x1000)
#define NIC_PF_ECC1_FLIP0 (0x1008)
@@ -1190,7 +1190,17 @@ struct sk_buff *nicvf_get_rcv_skb(struct nicvf *nic, struct cqe_rx_t *cqe_rx)
u64 *rb_ptrs = NULL;
rb_lens = (void *)cqe_rx + (3 * sizeof(u64));
- rb_ptrs = (void *)cqe_rx + (6 * sizeof(u64));
+ /* Except 88xx pass1 on all other chips CQE_RX2_S is added to
+ * CQE_RX at word6, hence buffer pointers move by word
+ *
+ * Use existing 'hw_tso' flag which will be set for all chips
+ * except 88xx pass1 instead of a additional cache line
+ * access (or miss) by using pci dev's revision.
+ */
+ if (!nic->hw_tso)
+ rb_ptrs = (void *)cqe_rx + (6 * sizeof(u64));
+ else
+ rb_ptrs = (void *)cqe_rx + (7 * sizeof(u64));
netdev_dbg(nic->netdev, "%s rb_cnt %d rb0_ptr %llx rb0_sz %d\n",
__func__, cqe_rx->rb_cnt, cqe_rx->rb0_ptr, cqe_rx->rb0_sz);