diff mbox

[v2,2/2] arm64: dts: Updated NAND DT properties for NS2 SVK

Message ID 1469051631-7896-3-git-send-email-ray.jui@broadcom.com (mailing list archive)
State New, archived
Headers show

Commit Message

Ray Jui July 20, 2016, 9:53 p.m. UTC
This patch adds NAND DT properties for NS2 SVK to configure the bus
width width and OOB sector size

Signed-off-by: Prafulla Kota <prafulla.kota@broadcom.com>
Signed-off-by: Ray Jui <ray.jui@broadcom.com>
---
 arch/arm64/boot/dts/broadcom/ns2-svk.dts | 2 ++
 1 file changed, 2 insertions(+)

Comments

Ray Jui Oct. 17, 2016, 8:49 p.m. UTC | #1
Hi Florian,

Would you be able to help to queue the following patch for v4.10? Sorry 
I did not include you in the "To" field of the original email.

Thanks,

Ray

On 7/20/2016 2:53 PM, Ray Jui wrote:
> This patch adds NAND DT properties for NS2 SVK to configure the bus
> width width and OOB sector size
>
> Signed-off-by: Prafulla Kota <prafulla.kota@broadcom.com>
> Signed-off-by: Ray Jui <ray.jui@broadcom.com>
> ---
>  arch/arm64/boot/dts/broadcom/ns2-svk.dts | 2 ++
>  1 file changed, 2 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/broadcom/ns2-svk.dts b/arch/arm64/boot/dts/broadcom/ns2-svk.dts
> index 54ca40c..5ef0407 100644
> --- a/arch/arm64/boot/dts/broadcom/ns2-svk.dts
> +++ b/arch/arm64/boot/dts/broadcom/ns2-svk.dts
> @@ -128,6 +128,8 @@
>  		nand-ecc-mode = "hw";
>  		nand-ecc-strength = <8>;
>  		nand-ecc-step-size = <512>;
> +		nand-bus-width = <16>;
> +		brcm,nand-oob-sector-size = <16>;
>  		#address-cells = <1>;
>  		#size-cells = <1>;
>  	};
>
Florian Fainelli Oct. 18, 2016, 12:54 a.m. UTC | #2
On 10/17/2016 01:49 PM, Ray Jui wrote:
> Hi Florian,
> 
> Would you be able to help to queue the following patch for v4.10? Sorry
> I did not include you in the "To" field of the original email.

Applied, thanks!
diff mbox

Patch

diff --git a/arch/arm64/boot/dts/broadcom/ns2-svk.dts b/arch/arm64/boot/dts/broadcom/ns2-svk.dts
index 54ca40c..5ef0407 100644
--- a/arch/arm64/boot/dts/broadcom/ns2-svk.dts
+++ b/arch/arm64/boot/dts/broadcom/ns2-svk.dts
@@ -128,6 +128,8 @@ 
 		nand-ecc-mode = "hw";
 		nand-ecc-strength = <8>;
 		nand-ecc-step-size = <512>;
+		nand-bus-width = <16>;
+		brcm,nand-oob-sector-size = <16>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 	};