diff mbox

[v9.1,3/6] phy: Add USB Type-C PHY driver for rk3399

Message ID 1470189811-6604-1-git-send-email-zyw@rock-chips.com (mailing list archive)
State New, archived
Headers show

Commit Message

Chris Zhong Aug. 3, 2016, 2:03 a.m. UTC
Add a PHY provider driver for the rk3399 SoC Type-c PHY. The USB
Type-C PHY is designed to support the USB3 and DP applications. The
PHY basically has two main components: USB3 and DisplyPort. USB3
operates in SuperSpeed mode and the DP can operate at RBR, HBR and
HBR2 data rates. Hence, create 2 PHY deivces, the phy[0] for DP,
and phy[1] for USB3.

Signed-off-by: Chris Zhong <zyw@rock-chips.com>
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>

---

Changes in v9.1:
- better mutex lock for phy mode and flip

Changes in v9:
- split the Type-C PHY into two PHYs: USB3 and DP

Changes in v8:
- set the default cable id to EXTCON_USB_HOST
- optimization Error log

Changes in v7:
- support new API of extcon

Changes in v6:
- delete the support of PIN_ASSIGN_A/B
- set the default mode to MODE_DFP_USB
- disable DP PLL at USB3 only mode

Changes in v5:
- support get property from extcon
- remove PIN ASSIGN A/B support

Changes in v4:
- select EXTCON
- use phy framework to control the USB3 and DP function
- rename PIN_MAP_ to PIN_ASSIGN_

Changes in v3:
- remove the phy framework(Kishon Vijay Abraham I)
- add parentheses around the macro
- use a single space between type and name
- add spaces after opening and before closing braces.
- use u16 for register value
- remove type-c phy header file
- CodingStyle optimization
- use some cable extcon to get type-c port information
- add a extcon to notify Display Port

Changes in v2:
- select RESET_CONTROLLER
- alphabetic order
- modify some spelling mistakes
- make mode cleaner
- use bool for enable/disable
- check all of the return value
- return a better err number
- use more readx_poll_timeout()
- clk_disable_unprepare(tcphy->clk_ref);
- remove unuse functions, rockchip_typec_phy_power_on/off
- remove unnecessary typecast from void *
- use dts node to distinguish between phys.

Changes in v1:
- update the licence note
- init core clock to 50MHz
- use extcon API
- remove unused global
- add some comments for magic num
- change usleep_range(1000, 2000) tousleep_range(1000, 1050)
- remove __func__ from dev_err
- return err number when get clk failed
- remove ADDR_ADJ define
- use devm_clk_get(&pdev->dev, "tcpdcore")

 drivers/phy/Kconfig              |    9 +
 drivers/phy/Makefile             |    1 +
 drivers/phy/phy-rockchip-typec.c | 1004 ++++++++++++++++++++++++++++++++++++++
 3 files changed, 1014 insertions(+)
 create mode 100644 drivers/phy/phy-rockchip-typec.c

Comments

Guenter Roeck Aug. 3, 2016, 3:15 a.m. UTC | #1
On Tue, Aug 2, 2016 at 7:03 PM, Chris Zhong <zyw@rock-chips.com> wrote:
> Add a PHY provider driver for the rk3399 SoC Type-c PHY. The USB
> Type-C PHY is designed to support the USB3 and DP applications. The
> PHY basically has two main components: USB3 and DisplyPort. USB3
> operates in SuperSpeed mode and the DP can operate at RBR, HBR and
> HBR2 data rates. Hence, create 2 PHY deivces, the phy[0] for DP,
> and phy[1] for USB3.
>
> Signed-off-by: Chris Zhong <zyw@rock-chips.com>
> Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
>
> ---
>
> Changes in v9.1:
> - better mutex lock for phy mode and flip
>
> Changes in v9:
> - split the Type-C PHY into two PHYs: USB3 and DP
>
> Changes in v8:
> - set the default cable id to EXTCON_USB_HOST
> - optimization Error log
>
> Changes in v7:
> - support new API of extcon
>
> Changes in v6:
> - delete the support of PIN_ASSIGN_A/B
> - set the default mode to MODE_DFP_USB
> - disable DP PLL at USB3 only mode
>
> Changes in v5:
> - support get property from extcon
> - remove PIN ASSIGN A/B support
>
> Changes in v4:
> - select EXTCON
> - use phy framework to control the USB3 and DP function
> - rename PIN_MAP_ to PIN_ASSIGN_
>
> Changes in v3:
> - remove the phy framework(Kishon Vijay Abraham I)
> - add parentheses around the macro
> - use a single space between type and name
> - add spaces after opening and before closing braces.
> - use u16 for register value
> - remove type-c phy header file
> - CodingStyle optimization
> - use some cable extcon to get type-c port information
> - add a extcon to notify Display Port
>
> Changes in v2:
> - select RESET_CONTROLLER
> - alphabetic order
> - modify some spelling mistakes
> - make mode cleaner
> - use bool for enable/disable
> - check all of the return value
> - return a better err number
> - use more readx_poll_timeout()
> - clk_disable_unprepare(tcphy->clk_ref);
> - remove unuse functions, rockchip_typec_phy_power_on/off
> - remove unnecessary typecast from void *
> - use dts node to distinguish between phys.
>
> Changes in v1:
> - update the licence note
> - init core clock to 50MHz
> - use extcon API
> - remove unused global
> - add some comments for magic num
> - change usleep_range(1000, 2000) tousleep_range(1000, 1050)
> - remove __func__ from dev_err
> - return err number when get clk failed
> - remove ADDR_ADJ define
> - use devm_clk_get(&pdev->dev, "tcpdcore")
>
>  drivers/phy/Kconfig              |    9 +
>  drivers/phy/Makefile             |    1 +
>  drivers/phy/phy-rockchip-typec.c | 1004 ++++++++++++++++++++++++++++++++++++++
>  3 files changed, 1014 insertions(+)
>  create mode 100644 drivers/phy/phy-rockchip-typec.c
>
> diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
> index 26566db..83706a5 100644
> --- a/drivers/phy/Kconfig
> +++ b/drivers/phy/Kconfig
> @@ -351,6 +351,15 @@ config PHY_ROCKCHIP_DP
>         help
>           Enable this to support the Rockchip Display Port PHY.
>
> +config PHY_ROCKCHIP_TYPEC
> +       tristate "Rockchip TYPEC PHY Driver"
> +       depends on ARCH_ROCKCHIP && OF
> +       select EXTCON
> +       select GENERIC_PHY
> +       select RESET_CONTROLLER
> +       help
> +         Enable this to support the Rockchip USB TYPEC PHY.
> +
>  config PHY_ST_SPEAR1310_MIPHY
>         tristate "ST SPEAR1310-MIPHY driver"
>         select GENERIC_PHY
> diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
> index 24596a9..91fa413 100644
> --- a/drivers/phy/Makefile
> +++ b/drivers/phy/Makefile
> @@ -39,6 +39,7 @@ obj-$(CONFIG_PHY_QCOM_APQ8064_SATA)   += phy-qcom-apq8064-sata.o
>  obj-$(CONFIG_PHY_ROCKCHIP_USB) += phy-rockchip-usb.o
>  obj-$(CONFIG_PHY_ROCKCHIP_EMMC) += phy-rockchip-emmc.o
>  obj-$(CONFIG_PHY_ROCKCHIP_DP)          += phy-rockchip-dp.o
> +obj-$(CONFIG_PHY_ROCKCHIP_TYPEC) += phy-rockchip-typec.o
>  obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA)    += phy-qcom-ipq806x-sata.o
>  obj-$(CONFIG_PHY_ST_SPEAR1310_MIPHY)   += phy-spear1310-miphy.o
>  obj-$(CONFIG_PHY_ST_SPEAR1340_MIPHY)   += phy-spear1340-miphy.o
> diff --git a/drivers/phy/phy-rockchip-typec.c b/drivers/phy/phy-rockchip-typec.c
> new file mode 100644
> index 0000000..27a1663
> --- /dev/null
> +++ b/drivers/phy/phy-rockchip-typec.c
> @@ -0,0 +1,1004 @@
> +/*
> + * Copyright (C) Fuzhou Rockchip Electronics Co.Ltd
> + * Author: Chris Zhong <zyw@rock-chips.com>
> + *         Kever Yang <kever.yang@rock-chips.com>
> + *
> + * This software is licensed under the terms of the GNU General Public
> + * License version 2, as published by the Free Software Foundation, and
> + * may be copied, distributed, and modified under those terms.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/clk-provider.h>
> +#include <linux/delay.h>
> +#include <linux/extcon.h>
> +#include <linux/io.h>
> +#include <linux/iopoll.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/mutex.h>
> +#include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/of_platform.h>
> +#include <linux/platform_device.h>
> +#include <linux/regmap.h>
> +#include <linux/reset.h>
> +
> +#include <linux/mfd/syscon.h>
> +#include <linux/phy/phy.h>
> +
> +#define CMN_SSM_BANDGAP                        (0x21 << 2)
> +#define CMN_SSM_BIAS                   (0x22 << 2)
> +#define CMN_PLLSM0_PLLEN               (0x29 << 2)
> +#define CMN_PLLSM0_PLLPRE              (0x2a << 2)
> +#define CMN_PLLSM0_PLLVREF             (0x2b << 2)
> +#define CMN_PLLSM0_PLLLOCK             (0x2c << 2)
> +#define CMN_PLLSM1_PLLEN               (0x31 << 2)
> +#define CMN_PLLSM1_PLLPRE              (0x32 << 2)
> +#define CMN_PLLSM1_PLLVREF             (0x33 << 2)
> +#define CMN_PLLSM1_PLLLOCK             (0x34 << 2)
> +#define CMN_PLLSM1_USER_DEF_CTRL       (0x37 << 2)
> +#define CMN_ICAL_OVRD                  (0xc1 << 2)
> +#define CMN_PLL0_VCOCAL_OVRD           (0x83 << 2)
> +#define CMN_PLL0_VCOCAL_INIT           (0x84 << 2)
> +#define CMN_PLL0_VCOCAL_ITER           (0x85 << 2)
> +#define CMN_PLL0_LOCK_REFCNT_START     (0x90 << 2)
> +#define CMN_PLL0_LOCK_PLLCNT_START     (0x92 << 2)
> +#define CMN_PLL0_LOCK_PLLCNT_THR       (0x93 << 2)
> +#define CMN_PLL0_INTDIV                        (0x94 << 2)
> +#define CMN_PLL0_FRACDIV               (0x95 << 2)
> +#define CMN_PLL0_HIGH_THR              (0x96 << 2)
> +#define CMN_PLL0_DSM_DIAG              (0x97 << 2)
> +#define CMN_PLL0_SS_CTRL1              (0x98 << 2)
> +#define CMN_PLL0_SS_CTRL2              (0x99 << 2)
> +#define CMN_PLL1_VCOCAL_START          (0xa1 << 2)
> +#define CMN_PLL1_VCOCAL_OVRD           (0xa3 << 2)
> +#define CMN_PLL1_VCOCAL_INIT           (0xa4 << 2)
> +#define CMN_PLL1_VCOCAL_ITER           (0xa5 << 2)
> +#define CMN_PLL1_LOCK_REFCNT_START     (0xb0 << 2)
> +#define CMN_PLL1_LOCK_PLLCNT_START     (0xb2 << 2)
> +#define CMN_PLL1_LOCK_PLLCNT_THR       (0xb3 << 2)
> +#define CMN_PLL1_INTDIV                        (0xb4 << 2)
> +#define CMN_PLL1_FRACDIV               (0xb5 << 2)
> +#define CMN_PLL1_HIGH_THR              (0xb6 << 2)
> +#define CMN_PLL1_DSM_DIAG              (0xb7 << 2)
> +#define CMN_PLL1_SS_CTRL1              (0xb8 << 2)
> +#define CMN_PLL1_SS_CTRL2              (0xb9 << 2)
> +#define CMN_RXCAL_OVRD                 (0xd1 << 2)
> +#define CMN_TXPUCAL_CTRL               (0xe0 << 2)
> +#define CMN_TXPUCAL_OVRD               (0xe1 << 2)
> +#define CMN_TXPDCAL_OVRD               (0xf1 << 2)
> +#define CMN_DIAG_PLL0_FBH_OVRD         (0x1c0 << 2)
> +#define CMN_DIAG_PLL0_FBL_OVRD         (0x1c1 << 2)
> +#define CMN_DIAG_PLL0_OVRD             (0x1c2 << 2)
> +#define CMN_DIAG_PLL0_V2I_TUNE         (0x1c5 << 2)
> +#define CMN_DIAG_PLL0_CP_TUNE          (0x1c6 << 2)
> +#define CMN_DIAG_PLL0_LF_PROG          (0x1c7 << 2)
> +#define CMN_DIAG_PLL1_FBH_OVRD         (0x1d0 << 2)
> +#define CMN_DIAG_PLL1_FBL_OVRD         (0x1d1 << 2)
> +#define CMN_DIAG_PLL1_OVRD             (0x1d2 << 2)
> +#define CMN_DIAG_PLL1_V2I_TUNE         (0x1d5 << 2)
> +#define CMN_DIAG_PLL1_CP_TUNE          (0x1d6 << 2)
> +#define CMN_DIAG_PLL1_LF_PROG          (0x1d7 << 2)
> +#define CMN_DIAG_PLL1_PTATIS_TUNE1     (0x1d8 << 2)
> +#define CMN_DIAG_PLL1_PTATIS_TUNE2     (0x1d9 << 2)
> +#define CMN_DIAG_PLL1_INCLK_CTRL       (0x1da << 2)
> +#define CMN_DIAG_HSCLK_SEL             (0x1e0 << 2)
> +
> +#define XCVR_PSM_RCTRL(n)              ((0x4001 | ((n) << 9)) << 2)
> +#define XCVR_PSM_CAL_TMR(n)            ((0x4002 | ((n) << 9)) << 2)
> +#define XCVR_PSM_A0IN_TMR(n)           ((0x4003 | ((n) << 9)) << 2)
> +#define TX_TXCC_CAL_SCLR_MULT(n)       ((0x4047 | ((n) << 9)) << 2)
> +#define TX_TXCC_CPOST_MULT_00(n)       ((0x404c | ((n) << 9)) << 2)
> +#define TX_TXCC_CPOST_MULT_01(n)       ((0x404d | ((n) << 9)) << 2)
> +#define TX_TXCC_CPOST_MULT_10(n)       ((0x404e | ((n) << 9)) << 2)
> +#define TX_TXCC_CPOST_MULT_11(n)       ((0x404f | ((n) << 9)) << 2)
> +#define TX_TXCC_MGNFS_MULT_000(n)      ((0x4050 | ((n) << 9)) << 2)
> +#define TX_TXCC_MGNFS_MULT_001(n)      ((0x4051 | ((n) << 9)) << 2)
> +#define TX_TXCC_MGNFS_MULT_010(n)      ((0x4052 | ((n) << 9)) << 2)
> +#define TX_TXCC_MGNFS_MULT_011(n)      ((0x4053 | ((n) << 9)) << 2)
> +#define TX_TXCC_MGNFS_MULT_100(n)      ((0x4054 | ((n) << 9)) << 2)
> +#define TX_TXCC_MGNFS_MULT_101(n)      ((0x4055 | ((n) << 9)) << 2)
> +#define TX_TXCC_MGNFS_MULT_110(n)      ((0x4056 | ((n) << 9)) << 2)
> +#define TX_TXCC_MGNFS_MULT_111(n)      ((0x4057 | ((n) << 9)) << 2)
> +#define XCVR_DIAG_PLLDRC_CTRL(n)       ((0x40e0 | ((n) << 9)) << 2)
> +#define XCVR_DIAG_BIDI_CTRL(n)         ((0x40e8 | ((n) << 9)) << 2)
> +#define XCVR_DIAG_LANE_FCM_EN_MGN(n)   ((0x40f2 | ((n) << 9)) << 2)
> +#define TX_PSC_A0(n)                   ((0x4100 | ((n) << 9)) << 2)
> +#define TX_PSC_A1(n)                   ((0x4101 | ((n) << 9)) << 2)
> +#define TX_PSC_A2(n)                   ((0x4102 | ((n) << 9)) << 2)
> +#define TX_PSC_A3(n)                   ((0x4103 | ((n) << 9)) << 2)
> +#define TX_RCVDET_CTRL(n)              ((0x4120 | ((n) << 9)) << 2)
> +#define TX_RCVDET_EN_TMR(n)            ((0x4122 | ((n) << 9)) << 2)
> +#define TX_RCVDET_ST_TMR(n)            ((0x4123 | ((n) << 9)) << 2)
> +#define TX_DIAG_TX_DRV(n)              ((0x41e1 | ((n) << 9)) << 2)
> +#define TX_DIAG_BGREF_PREDRV_DELAY     (0x41e7 << 2)
> +#define TX_ANA_CTRL_REG_1              (0x5020 << 2)
> +#define TX_ANA_CTRL_REG_2              (0x5021 << 2)
> +#define TXDA_COEFF_CALC_CTRL           (0x5022 << 2)
> +#define TX_DIG_CTRL_REG_2              (0x5024 << 2)
> +#define TXDA_CYA_AUXDA_CYA             (0x5025 << 2)
> +#define TX_ANA_CTRL_REG_3              (0x5026 << 2)
> +#define TX_ANA_CTRL_REG_4              (0x5027 << 2)
> +#define TX_ANA_CTRL_REG_5              (0x5029 << 2)
> +
> +#define RX_PSC_A0(n)                   ((0x8000 | ((n) << 9)) << 2)
> +#define RX_PSC_A1(n)                   ((0x8001 | ((n) << 9)) << 2)
> +#define RX_PSC_A2(n)                   ((0x8002 | ((n) << 9)) << 2)
> +#define RX_PSC_A3(n)                   ((0x8003 | ((n) << 9)) << 2)
> +#define RX_PSC_CAL(n)                  ((0x8006 | ((n) << 9)) << 2)
> +#define RX_PSC_RDY(n)                  ((0x8007 | ((n) << 9)) << 2)
> +#define RX_IQPI_ILL_CAL_OVRD           (0x8023 << 2)
> +#define RX_EPI_ILL_CAL_OVRD            (0x8033 << 2)
> +#define RX_SDCAL0_OVRD                 (0x8041 << 2)
> +#define RX_SDCAL1_OVRD                 (0x8049 << 2)
> +#define RX_SLC_INIT                    (0x806d << 2)
> +#define RX_SLC_RUN                     (0x806e << 2)
> +#define RX_CDRLF_CNFG2                 (0x8081 << 2)
> +#define RX_SIGDET_HL_FILT_TMR(n)       ((0x8090 | ((n) << 9)) << 2)
> +#define RX_SLC_IOP0_OVRD               (0x8101 << 2)
> +#define RX_SLC_IOP1_OVRD               (0x8105 << 2)
> +#define RX_SLC_QOP0_OVRD               (0x8109 << 2)
> +#define RX_SLC_QOP1_OVRD               (0x810d << 2)
> +#define RX_SLC_EOP0_OVRD               (0x8111 << 2)
> +#define RX_SLC_EOP1_OVRD               (0x8115 << 2)
> +#define RX_SLC_ION0_OVRD               (0x8119 << 2)
> +#define RX_SLC_ION1_OVRD               (0x811d << 2)
> +#define RX_SLC_QON0_OVRD               (0x8121 << 2)
> +#define RX_SLC_QON1_OVRD               (0x8125 << 2)
> +#define RX_SLC_EON0_OVRD               (0x8129 << 2)
> +#define RX_SLC_EON1_OVRD               (0x812d << 2)
> +#define RX_SLC_IEP0_OVRD               (0x8131 << 2)
> +#define RX_SLC_IEP1_OVRD               (0x8135 << 2)
> +#define RX_SLC_QEP0_OVRD               (0x8139 << 2)
> +#define RX_SLC_QEP1_OVRD               (0x813d << 2)
> +#define RX_SLC_EEP0_OVRD               (0x8141 << 2)
> +#define RX_SLC_EEP1_OVRD               (0x8145 << 2)
> +#define RX_SLC_IEN0_OVRD               (0x8149 << 2)
> +#define RX_SLC_IEN1_OVRD               (0x814d << 2)
> +#define RX_SLC_QEN0_OVRD               (0x8151 << 2)
> +#define RX_SLC_QEN1_OVRD               (0x8155 << 2)
> +#define RX_SLC_EEN0_OVRD               (0x8159 << 2)
> +#define RX_SLC_EEN1_OVRD               (0x815d << 2)
> +#define RX_DIAG_SIGDET_TUNE(n)         ((0x81dc | ((n) << 9)) << 2)
> +#define RX_DIAG_SC2C_DELAY             (0x81e1 << 2)
> +
> +#define PMA_LANE_CFG                   (0xc000 << 2)
> +#define PIPE_CMN_CTRL1                 (0xc001 << 2)
> +#define PIPE_CMN_CTRL2                 (0xc002 << 2)
> +#define PIPE_COM_LOCK_CFG1             (0xc003 << 2)
> +#define PIPE_COM_LOCK_CFG2             (0xc004 << 2)
> +#define PIPE_RCV_DET_INH               (0xc005 << 2)
> +#define DP_MODE_CTL                    (0xc008 << 2)
> +#define DP_CLK_CTL                     (0xc009 << 2)
> +#define STS                            (0xc00F << 2)
> +#define PHY_ISO_CMN_CTRL               (0xc010 << 2)
> +#define PHY_DP_TX_CTL                  (0xc408 << 2)
> +#define PMA_CMN_CTRL1                  (0xc800 << 2)
> +#define PHY_PMA_ISO_CMN_CTRL           (0xc810 << 2)
> +#define PHY_ISOLATION_CTRL             (0xc81f << 2)
> +#define PHY_PMA_ISO_XCVR_CTRL(n)       ((0xcc11 | ((n) << 6)) << 2)
> +#define PHY_PMA_ISO_LINK_MODE(n)       ((0xcc12 | ((n) << 6)) << 2)
> +#define PHY_PMA_ISO_PWRST_CTRL(n)      ((0xcc13 | ((n) << 6)) << 2)
> +#define PHY_PMA_ISO_TX_DATA_LO(n)      ((0xcc14 | ((n) << 6)) << 2)
> +#define PHY_PMA_ISO_TX_DATA_HI(n)      ((0xcc15 | ((n) << 6)) << 2)
> +#define PHY_PMA_ISO_RX_DATA_LO(n)      ((0xcc16 | ((n) << 6)) << 2)
> +#define PHY_PMA_ISO_RX_DATA_HI(n)      ((0xcc17 | ((n) << 6)) << 2)
> +#define TX_BIST_CTRL(n)                        ((0x4140 | ((n) << 9)) << 2)
> +#define TX_BIST_UDDWR(n)               ((0x4141 | ((n) << 9)) << 2)
> +
> +/*
> + * Selects which PLL clock will be driven on the analog high speed
> + * clock 0: PLL 0 div 1
> + * clock 1: PLL 1 div 2
> + */
> +#define CLK_PLL_CONFIG                 0X30
> +#define CLK_PLL_MASK                   0x33
> +
> +#define CMN_READY                      BIT(0)
> +
> +#define DP_PLL_CLOCK_ENABLE            BIT(2)
> +#define DP_PLL_ENABLE                  BIT(0)
> +#define DP_PLL_DATA_RATE_RBR           ((2 << 12) | (4 << 8))
> +#define DP_PLL_DATA_RATE_HBR           ((2 << 12) | (4 << 8))
> +#define DP_PLL_DATA_RATE_HBR2          ((1 << 12) | (2 << 8))
> +
> +#define GRF_SOC_CON26                  0x6268
> +#define UPHY_DP_SEL                    BIT(3)
> +#define UPHY_DP_SEL_MASK               BIT(19)
> +#define DPTX_HPD_SEL                   (3 << 12)
> +#define DPTX_HPD_DEL                   (2 << 12)
> +#define DPTX_HPD_SEL_MASK              (3 << 28)
> +
> +#define DP_MODE_A0                     BIT(4)
> +#define DP_MODE_A2                     BIT(6)
> +#define DP_MODE_ENTER_A0               0xc101
> +#define DP_MODE_ENTER_A2               0xc104
> +
> +#define PHY_MODE_SET_TIMEOUT           100000
> +
> +#define PIN_ASSIGN_C_E                 0x51d9
> +#define PIN_ASSIGN_D_F                 0x5100
> +
> +#define MODE_DISCONNECT                        0
> +#define MODE_UFP_USB                   BIT(0)
> +#define MODE_DFP_USB                   BIT(1)
> +#define MODE_DFP_DP                    BIT(2)
> +
> +struct usb3phy_reg {
> +       u32 offset;
> +       u32 enable_bit;
> +       u32 write_enable;
> +};
> +
> +struct rockchip_usb3phy_port_cfg {
> +       struct usb3phy_reg typec_conn_dir;
> +       struct usb3phy_reg usb3tousb2_en;
> +       struct usb3phy_reg external_psm;
> +       struct usb3phy_reg pipe_status;
> +       struct usb3phy_reg uphy_dp_sel;
> +};
> +
> +struct rockchip_typec_phy {
> +       struct device *dev;
> +       void __iomem *base;
> +       struct extcon_dev *extcon;
> +       struct phy *phy[2];
> +       struct regmap *grf_regs;
> +       struct clk *clk_core;
> +       struct clk *clk_ref;
> +       struct reset_control *uphy_rst;
> +       struct reset_control *pipe_rst;
> +       struct reset_control *tcphy_rst;
> +       struct rockchip_usb3phy_port_cfg port_cfgs;
> +       /* mutex to protect access to individual PHYs */
> +       struct mutex lock;
> +
> +       bool flip;
> +       u8 mode;
> +};
> +
> +struct phy_reg {
> +       u16 value;
> +       u32 addr;
> +};
> +
> +struct phy_reg usb_pll_cfg[] = {
> +       { 0xf0,         CMN_PLL0_VCOCAL_INIT },
> +       { 0x18,         CMN_PLL0_VCOCAL_ITER },
> +       { 0xd0,         CMN_PLL0_INTDIV },
> +       { 0x4a4a,       CMN_PLL0_FRACDIV },
> +       { 0x34,         CMN_PLL0_HIGH_THR },
> +       { 0x1ee,        CMN_PLL0_SS_CTRL1 },
> +       { 0x7f03,       CMN_PLL0_SS_CTRL2 },
> +       { 0x20,         CMN_PLL0_DSM_DIAG },
> +       { 0,            CMN_DIAG_PLL0_OVRD },
> +       { 0,            CMN_DIAG_PLL0_FBH_OVRD },
> +       { 0,            CMN_DIAG_PLL0_FBL_OVRD },
> +       { 0x7,          CMN_DIAG_PLL0_V2I_TUNE },
> +       { 0x45,         CMN_DIAG_PLL0_CP_TUNE },
> +       { 0x8,          CMN_DIAG_PLL0_LF_PROG },
> +};
> +
> +struct phy_reg dp_pll_cfg[] = {
> +       { 0xf0,         CMN_PLL1_VCOCAL_INIT },
> +       { 0x18,         CMN_PLL1_VCOCAL_ITER },
> +       { 0x30b9,       CMN_PLL1_VCOCAL_START },
> +       { 0x21c,        CMN_PLL1_INTDIV },
> +       { 0,            CMN_PLL1_FRACDIV },
> +       { 0x5,          CMN_PLL1_HIGH_THR },
> +       { 0x35,         CMN_PLL1_SS_CTRL1 },
> +       { 0x7f1e,       CMN_PLL1_SS_CTRL2 },
> +       { 0x20,         CMN_PLL1_DSM_DIAG },
> +       { 0,            CMN_PLLSM1_USER_DEF_CTRL },
> +       { 0,            CMN_DIAG_PLL1_OVRD },
> +       { 0,            CMN_DIAG_PLL1_FBH_OVRD },
> +       { 0,            CMN_DIAG_PLL1_FBL_OVRD },
> +       { 0x6,          CMN_DIAG_PLL1_V2I_TUNE },
> +       { 0x45,         CMN_DIAG_PLL1_CP_TUNE },
> +       { 0x8,          CMN_DIAG_PLL1_LF_PROG },
> +       { 0x100,        CMN_DIAG_PLL1_PTATIS_TUNE1 },
> +       { 0x7,          CMN_DIAG_PLL1_PTATIS_TUNE2 },
> +       { 0x4,          CMN_DIAG_PLL1_INCLK_CTRL },
> +};
> +
> +static void tcphy_cfg_24m(struct rockchip_typec_phy *tcphy)
> +{
> +       u32 i, rdata;
> +
> +       /*
> +        * cmn_ref_clk_sel = 3, select the 24Mhz for clk parent
> +        * cmn_psm_clk_dig_div = 2, set the clk division to 2
> +        */
> +       writel(0x830, tcphy->base + PMA_CMN_CTRL1);
> +       for (i = 0; i < 4; i++) {
> +               /*
> +                * The following PHY configuration assumes a 24 MHz reference
> +                * clock.
> +                */
> +               writel(0x90, tcphy->base + XCVR_DIAG_LANE_FCM_EN_MGN(i));
> +               writel(0x960, tcphy->base + TX_RCVDET_EN_TMR(i));
> +               writel(0x30, tcphy->base + TX_RCVDET_ST_TMR(i));
> +       }
> +
> +       rdata = readl(tcphy->base + CMN_DIAG_HSCLK_SEL);
> +       rdata &= ~CLK_PLL_MASK;
> +       rdata |= CLK_PLL_CONFIG;
> +       writel(rdata, tcphy->base + CMN_DIAG_HSCLK_SEL);
> +}
> +
> +static void tcphy_cfg_usb_pll(struct rockchip_typec_phy *tcphy)
> +{
> +       u32 i;
> +
> +       /* load the configuration of PLL0 */
> +       for (i = 0; i < ARRAY_SIZE(usb_pll_cfg); i++)
> +               writel(usb_pll_cfg[i].value, tcphy->base + usb_pll_cfg[i].addr);
> +}
> +
> +static void tcphy_cfg_dp_pll(struct rockchip_typec_phy *tcphy)
> +{
> +       u32 i;
> +
> +       /* set the default mode to RBR */
> +       writel(DP_PLL_CLOCK_ENABLE | DP_PLL_ENABLE | DP_PLL_DATA_RATE_RBR,
> +              tcphy->base + DP_CLK_CTL);
> +
> +       /* load the configuration of PLL1 */
> +       for (i = 0; i < ARRAY_SIZE(dp_pll_cfg); i++)
> +               writel(dp_pll_cfg[i].value, tcphy->base + dp_pll_cfg[i].addr);
> +}
> +
> +static void tcphy_tx_usb_cfg_lane(struct rockchip_typec_phy *tcphy, u32 lane)
> +{
> +       writel(0x7799, tcphy->base + TX_PSC_A0(lane));
> +       writel(0x7798, tcphy->base + TX_PSC_A1(lane));
> +       writel(0x5098, tcphy->base + TX_PSC_A2(lane));
> +       writel(0x5098, tcphy->base + TX_PSC_A3(lane));
> +       writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_000(lane));
> +       writel(0xbf, tcphy->base + XCVR_DIAG_BIDI_CTRL(lane));
> +}
> +
> +static void tcphy_rx_usb_cfg_lane(struct rockchip_typec_phy *tcphy, u32 lane)
> +{
> +       writel(0xa6fd, tcphy->base + RX_PSC_A0(lane));
> +       writel(0xa6fd, tcphy->base + RX_PSC_A1(lane));
> +       writel(0xa410, tcphy->base + RX_PSC_A2(lane));
> +       writel(0x2410, tcphy->base + RX_PSC_A3(lane));
> +       writel(0x23ff, tcphy->base + RX_PSC_CAL(lane));
> +       writel(0x13, tcphy->base + RX_SIGDET_HL_FILT_TMR(lane));
> +       writel(0x1004, tcphy->base + RX_DIAG_SIGDET_TUNE(lane));
> +       writel(0x2010, tcphy->base + RX_PSC_RDY(lane));
> +       writel(0xfb, tcphy->base + XCVR_DIAG_BIDI_CTRL(lane));
> +}
> +
> +static void tcphy_dp_cfg_lane(struct rockchip_typec_phy *tcphy, u32 lane)
> +{
> +       u16 rdata;
> +
> +       writel(0xbefc, tcphy->base + XCVR_PSM_RCTRL(lane));
> +       writel(0x6799, tcphy->base + TX_PSC_A0(lane));
> +       writel(0x6798, tcphy->base + TX_PSC_A1(lane));
> +       writel(0x98, tcphy->base + TX_PSC_A2(lane));
> +       writel(0x98, tcphy->base + TX_PSC_A3(lane));
> +
> +       writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_000(lane));
> +       writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_001(lane));
> +       writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_010(lane));
> +       writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_011(lane));
> +       writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_100(lane));
> +       writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_101(lane));
> +       writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_110(lane));
> +       writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_111(lane));
> +       writel(0, tcphy->base + TX_TXCC_CPOST_MULT_10(lane));
> +       writel(0, tcphy->base + TX_TXCC_CPOST_MULT_01(lane));
> +       writel(0, tcphy->base + TX_TXCC_CPOST_MULT_00(lane));
> +       writel(0, tcphy->base + TX_TXCC_CPOST_MULT_11(lane));
> +
> +       writel(0x128, tcphy->base + TX_TXCC_CAL_SCLR_MULT(lane));
> +       writel(0x400, tcphy->base + TX_DIAG_TX_DRV(lane));
> +
> +       rdata = readl(tcphy->base + XCVR_DIAG_PLLDRC_CTRL(lane));
> +       rdata = (rdata & 0x8fff) | 0x6000;
> +       writel(rdata, tcphy->base + XCVR_DIAG_PLLDRC_CTRL(lane));
> +}
> +
> +static inline int property_enable(struct rockchip_typec_phy *tcphy,
> +                                 const struct usb3phy_reg *reg, bool en)
> +{
> +       u32 mask = 1 << reg->write_enable;
> +       u32 val = en << reg->enable_bit;
> +
> +       return regmap_write(tcphy->grf_regs, reg->offset, val | mask);
> +}
> +
> +static void tcphy_dp_aux_calibration(struct rockchip_typec_phy *tcphy)
> +{
> +       u16 rdata, rdata2, val;
> +
> +       /* disable txda_cal_latch_en for rewrite the calibration values */
> +       rdata = readl(tcphy->base + TX_ANA_CTRL_REG_1);
> +       val = rdata & 0xdfff;
> +       writel(val, tcphy->base + TX_ANA_CTRL_REG_1);
> +
> +       /*
> +        * read a resistor calibration code from CMN_TXPUCAL_CTRL[6:0] and
> +        * write it to TX_DIG_CTRL_REG_2[6:0], and delay 1ms to make sure it
> +        * works.
> +        */
> +       rdata = readl(tcphy->base + TX_DIG_CTRL_REG_2);
> +       rdata = rdata & 0xffc0;
> +
> +       rdata2 = readl(tcphy->base + CMN_TXPUCAL_CTRL);
> +       rdata2 = rdata2 & 0x3f;
> +
> +       val = rdata | rdata2;
> +       writel(val, tcphy->base + TX_DIG_CTRL_REG_2);
> +       usleep_range(1000, 1050);
> +
> +       /*
> +        * Enable signal for latch that sample and holds calibration values.
> +        * Activate this signal for 1 clock cycle to sample new calibration
> +        * values.
> +        */
> +       rdata = readl(tcphy->base + TX_ANA_CTRL_REG_1);
> +       val = rdata | 0x2000;
> +       writel(val, tcphy->base + TX_ANA_CTRL_REG_1);
> +       usleep_range(150, 200);
> +
> +       /* set TX Voltage Level and TX Deemphasis to 0 */
> +       writel(0, tcphy->base + PHY_DP_TX_CTL);
> +       /* re-enable decap */
> +       writel(0x100, tcphy->base + TX_ANA_CTRL_REG_2);
> +       writel(0x300, tcphy->base + TX_ANA_CTRL_REG_2);
> +       writel(0x2008, tcphy->base + TX_ANA_CTRL_REG_1);
> +       writel(0x2018, tcphy->base + TX_ANA_CTRL_REG_1);
> +
> +       writel(0, tcphy->base + TX_ANA_CTRL_REG_5);
> +
> +       /*
> +        * Programs txda_drv_ldo_prog[15:0], Sets driver LDO
> +        * voltage 16'h1001 for DP-AUX-TX and RX
> +        */
> +       writel(0x1001, tcphy->base + TX_ANA_CTRL_REG_4);
> +
> +       /* re-enables Bandgap reference for LDO */
> +       writel(0x2098, tcphy->base + TX_ANA_CTRL_REG_1);
> +       writel(0x2198, tcphy->base + TX_ANA_CTRL_REG_1);
> +
> +       /*
> +        * re-enables the transmitter pre-driver, driver data selection MUX,
> +        * and receiver detect circuits.
> +        */
> +       writel(0x301, tcphy->base + TX_ANA_CTRL_REG_2);
> +       writel(0x303, tcphy->base + TX_ANA_CTRL_REG_2);
> +
> +       /*
> +        * BIT 12: Controls auxda_polarity, which selects the polarity of the
> +        * xcvr:
> +        * 1, Reverses the polarity (If TYPEC, Pulls ups aux_p and pull
> +        * down aux_m)
> +        * 0, Normal polarity (if TYPE_C, pulls up aux_m and pulls down
> +        * aux_p)
> +        */
> +       val = 0xa078;
> +       if (!tcphy->flip)
> +               val |= BIT(12);
> +       writel(val, tcphy->base + TX_ANA_CTRL_REG_1);
> +
> +       writel(0, tcphy->base + TX_ANA_CTRL_REG_3);
> +       writel(0, tcphy->base + TX_ANA_CTRL_REG_4);
> +       writel(0, tcphy->base + TX_ANA_CTRL_REG_5);
> +
> +       /*
> +        * Controls low_power_swing_en, set the voltage swing of the driver
> +        * to 400mv. The values below are peak to peak (differential) values.
> +        */
> +       writel(4, tcphy->base + TXDA_COEFF_CALC_CTRL);
> +       writel(0, tcphy->base + TXDA_CYA_AUXDA_CYA);
> +
> +       /* Controls tx_high_z_tm_en */
> +       val = readl(tcphy->base + TX_DIG_CTRL_REG_2);
> +       val |= BIT(15);
> +       writel(val, tcphy->base + TX_DIG_CTRL_REG_2);
> +}
> +
> +static int tcphy_phy_init(struct rockchip_typec_phy *tcphy, u8 mode)
> +{
> +       struct rockchip_usb3phy_port_cfg *cfg = &tcphy->port_cfgs;
> +       int ret, i;
> +       u32 val;
> +
> +       ret = clk_prepare_enable(tcphy->clk_core);
> +       if (ret) {
> +               dev_err(tcphy->dev, "Failed to prepare_enable core clock\n");
> +               return ret;
> +       }
> +
> +       ret = clk_prepare_enable(tcphy->clk_ref);
> +       if (ret) {
> +               dev_err(tcphy->dev, "Failed to prepare_enable ref clock\n");
> +               goto err_clk_core;
> +       }
> +
> +       reset_control_deassert(tcphy->tcphy_rst);
> +
> +       property_enable(tcphy, &cfg->typec_conn_dir, tcphy->flip);
> +
> +       tcphy_cfg_24m(tcphy);
> +
> +       if (mode == MODE_DFP_DP) {
> +               tcphy_cfg_dp_pll(tcphy);
> +               for (i = 0; i < 4; i++)
> +                       tcphy_dp_cfg_lane(tcphy, i);
> +
> +               writel(PIN_ASSIGN_C_E, tcphy->base + PMA_LANE_CFG);
> +       } else {
> +               tcphy_cfg_usb_pll(tcphy);
> +               tcphy_cfg_dp_pll(tcphy);
> +               if (tcphy->flip) {
> +                       tcphy_tx_usb_cfg_lane(tcphy, 3);
> +                       tcphy_rx_usb_cfg_lane(tcphy, 2);
> +                       tcphy_dp_cfg_lane(tcphy, 0);
> +                       tcphy_dp_cfg_lane(tcphy, 1);
> +               } else {
> +                       tcphy_tx_usb_cfg_lane(tcphy, 0);
> +                       tcphy_rx_usb_cfg_lane(tcphy, 1);
> +                       tcphy_dp_cfg_lane(tcphy, 2);
> +                       tcphy_dp_cfg_lane(tcphy, 3);
> +               }
> +
> +               writel(PIN_ASSIGN_D_F, tcphy->base + PMA_LANE_CFG);
> +       }
> +
> +       writel(DP_MODE_ENTER_A2, tcphy->base + DP_MODE_CTL);
> +
> +       reset_control_deassert(tcphy->uphy_rst);
> +
> +       ret = readx_poll_timeout(readl, tcphy->base + PMA_CMN_CTRL1,
> +                                val, val & CMN_READY, 10,
> +                                PHY_MODE_SET_TIMEOUT);
> +       if (ret < 0) {
> +               dev_err(tcphy->dev, "wait pma ready timeout\n");
> +               ret = -ETIMEDOUT;
> +               goto err_wait_pma;
> +       }
> +
> +       reset_control_deassert(tcphy->pipe_rst);
> +
> +       return 0;
> +
> +err_wait_pma:
> +       reset_control_assert(tcphy->uphy_rst);
> +       reset_control_assert(tcphy->tcphy_rst);
> +       clk_disable_unprepare(tcphy->clk_ref);
> +err_clk_core:
> +       clk_disable_unprepare(tcphy->clk_core);
> +       return ret;
> +}
> +
> +static void tcphy_phy_deinit(struct rockchip_typec_phy *tcphy)
> +{
> +       reset_control_assert(tcphy->tcphy_rst);
> +       reset_control_assert(tcphy->uphy_rst);
> +       reset_control_assert(tcphy->pipe_rst);
> +       clk_disable_unprepare(tcphy->clk_core);
> +       clk_disable_unprepare(tcphy->clk_ref);
> +}
> +
> +static int tcphy_get_mode(struct rockchip_typec_phy *tcphy)
> +{
> +       struct extcon_dev *edev = tcphy->extcon;
> +       union extcon_property_value property;
> +       unsigned int id;
> +       bool dfp, ufp, dp;
> +       u8 mode;
> +       int ret;
> +
> +       ufp = extcon_get_state(edev, EXTCON_USB);
> +       dfp = extcon_get_state(edev, EXTCON_USB_HOST);
> +       dp = extcon_get_state(edev, EXTCON_DISP_DP);
> +
> +       mode = MODE_DFP_USB;
> +       id = EXTCON_USB_HOST;
> +
> +       if (ufp) {
> +               mode = MODE_UFP_USB;
> +               id = EXTCON_USB;
> +       } else if (dfp && dp) {
> +               mode = MODE_DFP_USB | MODE_DFP_DP;
> +       } else if (dp) {
> +               mode = MODE_DFP_DP;
> +               id = EXTCON_DISP_DP;
> +       }
> +
> +       ret = extcon_get_property(edev, id, EXTCON_PROP_USB_TYPEC_POLARITY,
> +                                 &property);
> +       if (ret) {
> +               dev_err(tcphy->dev, "get property failed\n");
> +               return ret;
> +       }
> +
> +       tcphy->flip = property.intval ? 1 : 0;
> +
> +       return mode;
> +}
> +
> +static int rockchip_usb3_phy_power_on(struct phy *phy)
> +{
> +       struct rockchip_typec_phy *tcphy = phy_get_drvdata(phy);
> +       struct rockchip_usb3phy_port_cfg *cfg = &tcphy->port_cfgs;
> +       const struct usb3phy_reg *reg = &cfg->pipe_status;
> +       int timeout, ret = 0;
> +       u32 val;
> +       u8 new_mode;

This will never be < 0 (sorry for not seeing this earlier)

> +
> +       mutex_lock(&tcphy->lock);
> +
> +       new_mode = tcphy_get_mode(tcphy);
> +       if (new_mode < 0) {

Maybe compile with W=1 ? That might give you a warning here.

> +               ret = new_mode;
> +               goto unlock_ret;
> +       }
> +
> +       if (!(new_mode & (MODE_DFP_USB | MODE_UFP_USB))) {
> +               ret = -ENODEV;
> +               goto unlock_ret;
> +       }
> +
> +       if (tcphy->mode == new_mode)
> +               goto unlock_ret;
> +
> +       if (tcphy->mode == MODE_DISCONNECT)
> +               tcphy_phy_init(tcphy, new_mode);
> +
> +       /* wait TCPHY for pipe ready */
> +       for (timeout = 0; timeout < 100; timeout++) {
> +               regmap_read(tcphy->grf_regs, reg->offset, &val);
> +               if (!(val & BIT(reg->enable_bit))) {
> +                       tcphy->mode |= new_mode & (MODE_DFP_USB | MODE_UFP_USB);
> +                       goto unlock_ret;
> +               }
> +               usleep_range(10, 20);
> +       }
> +
> +       if (tcphy->mode == MODE_DISCONNECT)
> +               tcphy_phy_deinit(tcphy);
> +
> +       ret = -ETIMEDOUT;
> +
> +unlock_ret:
> +       mutex_unlock(&tcphy->lock);
> +       return ret;
> +}
> +
> +static int rockchip_usb3_phy_power_off(struct phy *phy)
> +{
> +       struct rockchip_typec_phy *tcphy = phy_get_drvdata(phy);
> +
> +       if (tcphy->mode == MODE_DISCONNECT)
> +               goto unlock;
> +
> +       mutex_lock(&tcphy->lock);
> +
Lock is too late.

> +       tcphy->mode &= ~(MODE_UFP_USB | MODE_DFP_USB);
> +       if (tcphy->mode == MODE_DISCONNECT)
> +               tcphy_phy_deinit(tcphy);
> +
> +unlock:
> +       mutex_unlock(&tcphy->lock);
> +       return 0;
> +}
> +
> +static const struct phy_ops rockchip_usb3_phy_ops = {
> +       .power_on       = rockchip_usb3_phy_power_on,
> +       .power_off      = rockchip_usb3_phy_power_off,
> +       .owner          = THIS_MODULE,
> +};
> +
> +static int rockchip_dp_phy_power_on(struct phy *phy)
> +{
> +       struct rockchip_typec_phy *tcphy = phy_get_drvdata(phy);
> +       struct rockchip_usb3phy_port_cfg *cfg = &tcphy->port_cfgs;
> +       u32 val;
> +       u8 new_mode;

This can never be < 0.

> +       int ret = 0;
> +
> +       mutex_lock(&tcphy->lock);
> +
> +       new_mode = tcphy_get_mode(tcphy);
> +       if (new_mode < 0) {
> +               ret = new_mode;
> +               goto unlock_ret;
> +       }
> +
> +       if (!(new_mode & (MODE_DFP_DP))) {

Nitpick: Unnecessary ( ) around MODE_DFP_DP

> +               ret = -ENODEV;
> +               goto unlock_ret;
> +       }
> +
> +       if (tcphy->mode == new_mode)
> +               goto unlock_ret;
> +
> +       /*
> +        * If the PHY has been power on, but the mode is not DP only mode,
> +        * re-init the PHY for setting all of 4 lanes to DP.
> +        */
> +       if (new_mode == MODE_DFP_DP && tcphy->mode != MODE_DISCONNECT) {
> +               tcphy_phy_deinit(tcphy);
> +               tcphy_phy_init(tcphy, new_mode);
> +       } else if (tcphy->mode == MODE_DISCONNECT) {
> +               tcphy_phy_init(tcphy, new_mode);
> +       }
> +
> +       property_enable(tcphy, &cfg->uphy_dp_sel, 1);
> +
> +       ret = readx_poll_timeout(readl, tcphy->base + DP_MODE_CTL,
> +                                val, val & DP_MODE_A2, 1000,
> +                                PHY_MODE_SET_TIMEOUT);
> +       if (ret < 0) {
> +               dev_err(tcphy->dev, "failed to wait TCPHY enter A2\n");
> +               goto power_on_finish;
> +       }
> +
> +       tcphy_dp_aux_calibration(tcphy);
> +
> +       writel(DP_MODE_ENTER_A0, tcphy->base + DP_MODE_CTL);
> +
> +       ret = readx_poll_timeout(readl, tcphy->base + DP_MODE_CTL,
> +                                val, val & DP_MODE_A0, 1000,
> +                                PHY_MODE_SET_TIMEOUT);
> +       if (ret < 0) {
> +               writel(DP_MODE_ENTER_A2, tcphy->base + DP_MODE_CTL);
> +               dev_err(tcphy->dev, "failed to wait TCPHY enter A0\n");
> +               goto power_on_finish;
> +       }
> +
> +       regmap_write(tcphy->grf_regs, GRF_SOC_CON26,
> +                    DPTX_HPD_SEL_MASK | DPTX_HPD_SEL);
> +
> +       tcphy->mode |= MODE_DFP_DP;
> +
> +power_on_finish:
> +       if (tcphy->mode == MODE_DISCONNECT)
> +               tcphy_phy_deinit(tcphy);
> +unlock_ret:
> +       mutex_unlock(&tcphy->lock);
> +       return ret;
> +}
> +
> +static int rockchip_dp_phy_power_off(struct phy *phy)
> +{
> +       struct rockchip_typec_phy *tcphy = phy_get_drvdata(phy);
> +
> +       mutex_lock(&tcphy->lock);
> +
> +       if (tcphy->mode == MODE_DISCONNECT)
> +               goto unlock;
> +
> +       tcphy->mode &= ~MODE_DFP_DP;
> +       regmap_write(tcphy->grf_regs, GRF_SOC_CON26,
> +                    DPTX_HPD_SEL_MASK | DPTX_HPD_DEL);
> +
> +       writel(DP_MODE_ENTER_A2, tcphy->base + DP_MODE_CTL);
> +
> +       if (tcphy->mode == MODE_DISCONNECT)
> +               tcphy_phy_deinit(tcphy);
> +
> +unlock:
> +       mutex_unlock(&tcphy->lock);
> +       return 0;
> +}
> +
> +static const struct phy_ops rockchip_dp_phy_ops = {
> +       .power_on       = rockchip_dp_phy_power_on,
> +       .power_off      = rockchip_dp_phy_power_off,
> +       .owner          = THIS_MODULE,
> +};
> +
> +static int tcphy_get_param(struct device *dev,
> +                          struct usb3phy_reg *reg,
> +                          const char *name)
> +{
> +       u32 buffer[3];
> +       int ret;
> +
> +       ret = of_property_read_u32_array(dev->of_node, name, buffer, 3);
> +       if (ret) {
> +               dev_err(dev, "Can not parse %s\n", name);
> +               return ret;
> +       }
> +
> +       reg->offset = buffer[0];
> +       reg->enable_bit = buffer[1];
> +       reg->write_enable = buffer[2];
> +       return 0;
> +}
> +
> +static int tcphy_parse_dt(struct rockchip_typec_phy *tcphy,
> +                         struct device *dev)
> +{
> +       struct rockchip_usb3phy_port_cfg *cfg = &tcphy->port_cfgs;
> +       int ret;
> +
> +       ret = tcphy_get_param(dev, &cfg->typec_conn_dir,
> +                             "rockchip,typec-conn-dir");
> +       if (ret)
> +               return ret;
> +
> +       ret = tcphy_get_param(dev, &cfg->usb3tousb2_en,
> +                             "rockchip,usb3tousb2-en");
> +       if (ret)
> +               return ret;
> +
> +       ret = tcphy_get_param(dev, &cfg->external_psm,
> +                             "rockchip,external-psm");
> +       if (ret)
> +               return ret;
> +
> +       ret = tcphy_get_param(dev, &cfg->pipe_status,
> +                             "rockchip,pipe-status");
> +       if (ret)
> +               return ret;
> +
> +       ret = tcphy_get_param(dev, &cfg->uphy_dp_sel,
> +                             "rockchip,uphy-dp-sel");
> +       if (ret)
> +               return ret;
> +
> +       tcphy->grf_regs = syscon_regmap_lookup_by_phandle(dev->of_node,
> +                                                         "rockchip,grf");
> +       if (IS_ERR(tcphy->grf_regs)) {
> +               dev_err(dev, "could not find grf dt node\n");
> +               return PTR_ERR(tcphy->grf_regs);
> +       }
> +
> +       tcphy->clk_core = devm_clk_get(dev, "tcpdcore");
> +       if (IS_ERR(tcphy->clk_core)) {
> +               dev_err(dev, "could not get uphy core clock\n");
> +               return PTR_ERR(tcphy->clk_core);
> +       }
> +
> +       tcphy->clk_ref = devm_clk_get(dev, "tcpdphy-ref");
> +       if (IS_ERR(tcphy->clk_ref)) {
> +               dev_err(dev, "could not get uphy ref clock\n");
> +               return PTR_ERR(tcphy->clk_ref);
> +       }
> +
> +       tcphy->uphy_rst = devm_reset_control_get(dev, "uphy");
> +       if (IS_ERR(tcphy->uphy_rst)) {
> +               dev_err(dev, "no uphy_rst reset control found\n");
> +               return PTR_ERR(tcphy->uphy_rst);
> +       }
> +
> +       tcphy->pipe_rst = devm_reset_control_get(dev, "uphy-pipe");
> +       if (IS_ERR(tcphy->pipe_rst)) {
> +               dev_err(dev, "no pipe_rst reset control found\n");
> +               return PTR_ERR(tcphy->pipe_rst);
> +       }
> +
> +       tcphy->tcphy_rst = devm_reset_control_get(dev, "uphy-tcphy");
> +       if (IS_ERR(tcphy->tcphy_rst)) {
> +               dev_err(dev, "no tcphy_rst reset control found\n");
> +               return PTR_ERR(tcphy->tcphy_rst);
> +       }
> +
> +       return 0;
> +}
> +
> +static void typec_phy_pre_init(struct rockchip_typec_phy *tcphy)
> +{
> +       struct rockchip_usb3phy_port_cfg *cfg = &tcphy->port_cfgs;
> +
> +       reset_control_assert(tcphy->tcphy_rst);
> +       reset_control_assert(tcphy->uphy_rst);
> +       reset_control_assert(tcphy->pipe_rst);
> +
> +       /* select external psm clock */
> +       property_enable(tcphy, &cfg->external_psm, 1);
> +       property_enable(tcphy, &cfg->usb3tousb2_en, 0);
> +
> +       tcphy->mode = MODE_DISCONNECT;
> +}
> +
> +static struct phy *tcphy_phy_xlate(struct device *dev,
> +                                  struct of_phandle_args *args)
> +{
> +       struct rockchip_typec_phy *tcphy = dev_get_drvdata(dev);
> +       int i;
> +
> +       if (WARN_ON(args->args[0] >= 2))
> +               return ERR_PTR(-ENODEV);
> +
> +       for (i = 0; i < 2; i++) {
> +               if (i == args->args[0])
> +                       return tcphy->phy[i];
> +       }
> +
> +       return ERR_PTR(-ENODEV);
> +}
> +
> +static int rockchip_typec_phy_probe(struct platform_device *pdev)
> +{
> +       struct device *dev = &pdev->dev;
> +       struct rockchip_typec_phy *tcphy;
> +       struct phy_provider *phy_provider;
> +       struct resource *res;
> +       int ret;
> +
> +       tcphy = devm_kzalloc(dev, sizeof(*tcphy), GFP_KERNEL);
> +       if (!tcphy)
> +               return -ENOMEM;
> +
> +       res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +       tcphy->base = devm_ioremap_resource(dev, res);
> +       if (IS_ERR(tcphy->base))
> +               return PTR_ERR(tcphy->base);
> +
> +       ret = tcphy_parse_dt(tcphy, dev);
> +       if (ret)
> +               return ret;
> +
> +       tcphy->dev = dev;
> +       platform_set_drvdata(pdev, tcphy);
> +       mutex_init(&tcphy->lock);
> +
> +       typec_phy_pre_init(tcphy);
> +
> +       tcphy->extcon = extcon_get_edev_by_phandle(dev, 0);
> +       if (IS_ERR(tcphy->extcon)) {
> +               if (PTR_ERR(tcphy->extcon) != -EPROBE_DEFER)
> +                       dev_err(dev, "Invalid or missing extcon\n");
> +               return PTR_ERR(tcphy->extcon);
> +       }
> +
> +       tcphy->phy[0] = devm_phy_create(dev, NULL, &rockchip_dp_phy_ops);
> +       if (IS_ERR(tcphy->phy[0])) {
> +               dev_err(dev, "failed to create DP phy\n");
> +               return PTR_ERR(tcphy->phy[0]);
> +       }
> +
> +       tcphy->phy[1] = devm_phy_create(dev, NULL, &rockchip_usb3_phy_ops);
> +       if (IS_ERR(tcphy->phy[1])) {
> +               dev_err(dev, "failed to create USB3 phy\n");
> +               return PTR_ERR(tcphy->phy[1]);
> +       }
> +
> +       phy_set_drvdata(tcphy->phy[0], tcphy);
> +       phy_set_drvdata(tcphy->phy[1], tcphy);
> +
> +       phy_provider = devm_of_phy_provider_register(dev, tcphy_phy_xlate);
> +       if (IS_ERR(phy_provider)) {
> +               dev_err(dev, "Failed to register phy provider\n");
> +               return PTR_ERR(phy_provider);
> +       }
> +
> +       return 0;
> +}
> +
> +static const struct of_device_id rockchip_typec_phy_dt_ids[] = {
> +       { .compatible = "rockchip,rk3399-typec-phy" },
> +       {}
> +};
> +
> +MODULE_DEVICE_TABLE(of, rockchip_typec_phy_dt_ids);
> +
> +static struct platform_driver rockchip_typec_phy_driver = {
> +       .probe          = rockchip_typec_phy_probe,
> +       .driver         = {
> +               .name   = "rockchip-typec-phy",
> +               .of_match_table = rockchip_typec_phy_dt_ids,
> +       },
> +};
> +
> +module_platform_driver(rockchip_typec_phy_driver);
> +
> +MODULE_AUTHOR("Chris Zhong <zyw@rock-chips.com>");
> +MODULE_AUTHOR("Kever Yang <kever.yang@rock-chips.com>");
> +MODULE_DESCRIPTION("Rockchip USB TYPE-C PHY driver");
> +MODULE_LICENSE("GPL v2");
> --
> 2.6.3
>
diff mbox

Patch

diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index 26566db..83706a5 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -351,6 +351,15 @@  config PHY_ROCKCHIP_DP
 	help
 	  Enable this to support the Rockchip Display Port PHY.
 
+config PHY_ROCKCHIP_TYPEC
+	tristate "Rockchip TYPEC PHY Driver"
+	depends on ARCH_ROCKCHIP && OF
+	select EXTCON
+	select GENERIC_PHY
+	select RESET_CONTROLLER
+	help
+	  Enable this to support the Rockchip USB TYPEC PHY.
+
 config PHY_ST_SPEAR1310_MIPHY
 	tristate "ST SPEAR1310-MIPHY driver"
 	select GENERIC_PHY
diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
index 24596a9..91fa413 100644
--- a/drivers/phy/Makefile
+++ b/drivers/phy/Makefile
@@ -39,6 +39,7 @@  obj-$(CONFIG_PHY_QCOM_APQ8064_SATA)	+= phy-qcom-apq8064-sata.o
 obj-$(CONFIG_PHY_ROCKCHIP_USB) += phy-rockchip-usb.o
 obj-$(CONFIG_PHY_ROCKCHIP_EMMC) += phy-rockchip-emmc.o
 obj-$(CONFIG_PHY_ROCKCHIP_DP)		+= phy-rockchip-dp.o
+obj-$(CONFIG_PHY_ROCKCHIP_TYPEC) += phy-rockchip-typec.o
 obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA)	+= phy-qcom-ipq806x-sata.o
 obj-$(CONFIG_PHY_ST_SPEAR1310_MIPHY)	+= phy-spear1310-miphy.o
 obj-$(CONFIG_PHY_ST_SPEAR1340_MIPHY)	+= phy-spear1340-miphy.o
diff --git a/drivers/phy/phy-rockchip-typec.c b/drivers/phy/phy-rockchip-typec.c
new file mode 100644
index 0000000..27a1663
--- /dev/null
+++ b/drivers/phy/phy-rockchip-typec.c
@@ -0,0 +1,1004 @@ 
+/*
+ * Copyright (C) Fuzhou Rockchip Electronics Co.Ltd
+ * Author: Chris Zhong <zyw@rock-chips.com>
+ *         Kever Yang <kever.yang@rock-chips.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/delay.h>
+#include <linux/extcon.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+
+#include <linux/mfd/syscon.h>
+#include <linux/phy/phy.h>
+
+#define CMN_SSM_BANDGAP			(0x21 << 2)
+#define CMN_SSM_BIAS			(0x22 << 2)
+#define CMN_PLLSM0_PLLEN		(0x29 << 2)
+#define CMN_PLLSM0_PLLPRE		(0x2a << 2)
+#define CMN_PLLSM0_PLLVREF		(0x2b << 2)
+#define CMN_PLLSM0_PLLLOCK		(0x2c << 2)
+#define CMN_PLLSM1_PLLEN		(0x31 << 2)
+#define CMN_PLLSM1_PLLPRE		(0x32 << 2)
+#define CMN_PLLSM1_PLLVREF		(0x33 << 2)
+#define CMN_PLLSM1_PLLLOCK		(0x34 << 2)
+#define CMN_PLLSM1_USER_DEF_CTRL	(0x37 << 2)
+#define CMN_ICAL_OVRD			(0xc1 << 2)
+#define CMN_PLL0_VCOCAL_OVRD		(0x83 << 2)
+#define CMN_PLL0_VCOCAL_INIT		(0x84 << 2)
+#define CMN_PLL0_VCOCAL_ITER		(0x85 << 2)
+#define CMN_PLL0_LOCK_REFCNT_START	(0x90 << 2)
+#define CMN_PLL0_LOCK_PLLCNT_START	(0x92 << 2)
+#define CMN_PLL0_LOCK_PLLCNT_THR	(0x93 << 2)
+#define CMN_PLL0_INTDIV			(0x94 << 2)
+#define CMN_PLL0_FRACDIV		(0x95 << 2)
+#define CMN_PLL0_HIGH_THR		(0x96 << 2)
+#define CMN_PLL0_DSM_DIAG		(0x97 << 2)
+#define CMN_PLL0_SS_CTRL1		(0x98 << 2)
+#define CMN_PLL0_SS_CTRL2		(0x99 << 2)
+#define CMN_PLL1_VCOCAL_START		(0xa1 << 2)
+#define CMN_PLL1_VCOCAL_OVRD		(0xa3 << 2)
+#define CMN_PLL1_VCOCAL_INIT		(0xa4 << 2)
+#define CMN_PLL1_VCOCAL_ITER		(0xa5 << 2)
+#define CMN_PLL1_LOCK_REFCNT_START	(0xb0 << 2)
+#define CMN_PLL1_LOCK_PLLCNT_START	(0xb2 << 2)
+#define CMN_PLL1_LOCK_PLLCNT_THR	(0xb3 << 2)
+#define CMN_PLL1_INTDIV			(0xb4 << 2)
+#define CMN_PLL1_FRACDIV		(0xb5 << 2)
+#define CMN_PLL1_HIGH_THR		(0xb6 << 2)
+#define CMN_PLL1_DSM_DIAG		(0xb7 << 2)
+#define CMN_PLL1_SS_CTRL1		(0xb8 << 2)
+#define CMN_PLL1_SS_CTRL2		(0xb9 << 2)
+#define CMN_RXCAL_OVRD			(0xd1 << 2)
+#define CMN_TXPUCAL_CTRL		(0xe0 << 2)
+#define CMN_TXPUCAL_OVRD		(0xe1 << 2)
+#define CMN_TXPDCAL_OVRD		(0xf1 << 2)
+#define CMN_DIAG_PLL0_FBH_OVRD		(0x1c0 << 2)
+#define CMN_DIAG_PLL0_FBL_OVRD		(0x1c1 << 2)
+#define CMN_DIAG_PLL0_OVRD		(0x1c2 << 2)
+#define CMN_DIAG_PLL0_V2I_TUNE		(0x1c5 << 2)
+#define CMN_DIAG_PLL0_CP_TUNE		(0x1c6 << 2)
+#define CMN_DIAG_PLL0_LF_PROG		(0x1c7 << 2)
+#define CMN_DIAG_PLL1_FBH_OVRD		(0x1d0 << 2)
+#define CMN_DIAG_PLL1_FBL_OVRD		(0x1d1 << 2)
+#define CMN_DIAG_PLL1_OVRD		(0x1d2 << 2)
+#define CMN_DIAG_PLL1_V2I_TUNE		(0x1d5 << 2)
+#define CMN_DIAG_PLL1_CP_TUNE		(0x1d6 << 2)
+#define CMN_DIAG_PLL1_LF_PROG		(0x1d7 << 2)
+#define CMN_DIAG_PLL1_PTATIS_TUNE1	(0x1d8 << 2)
+#define CMN_DIAG_PLL1_PTATIS_TUNE2	(0x1d9 << 2)
+#define CMN_DIAG_PLL1_INCLK_CTRL	(0x1da << 2)
+#define CMN_DIAG_HSCLK_SEL		(0x1e0 << 2)
+
+#define XCVR_PSM_RCTRL(n)		((0x4001 | ((n) << 9)) << 2)
+#define XCVR_PSM_CAL_TMR(n)		((0x4002 | ((n) << 9)) << 2)
+#define XCVR_PSM_A0IN_TMR(n)		((0x4003 | ((n) << 9)) << 2)
+#define TX_TXCC_CAL_SCLR_MULT(n)	((0x4047 | ((n) << 9)) << 2)
+#define TX_TXCC_CPOST_MULT_00(n)	((0x404c | ((n) << 9)) << 2)
+#define TX_TXCC_CPOST_MULT_01(n)	((0x404d | ((n) << 9)) << 2)
+#define TX_TXCC_CPOST_MULT_10(n)	((0x404e | ((n) << 9)) << 2)
+#define TX_TXCC_CPOST_MULT_11(n)	((0x404f | ((n) << 9)) << 2)
+#define TX_TXCC_MGNFS_MULT_000(n)	((0x4050 | ((n) << 9)) << 2)
+#define TX_TXCC_MGNFS_MULT_001(n)	((0x4051 | ((n) << 9)) << 2)
+#define TX_TXCC_MGNFS_MULT_010(n)	((0x4052 | ((n) << 9)) << 2)
+#define TX_TXCC_MGNFS_MULT_011(n)	((0x4053 | ((n) << 9)) << 2)
+#define TX_TXCC_MGNFS_MULT_100(n)	((0x4054 | ((n) << 9)) << 2)
+#define TX_TXCC_MGNFS_MULT_101(n)	((0x4055 | ((n) << 9)) << 2)
+#define TX_TXCC_MGNFS_MULT_110(n)	((0x4056 | ((n) << 9)) << 2)
+#define TX_TXCC_MGNFS_MULT_111(n)	((0x4057 | ((n) << 9)) << 2)
+#define XCVR_DIAG_PLLDRC_CTRL(n)	((0x40e0 | ((n) << 9)) << 2)
+#define XCVR_DIAG_BIDI_CTRL(n)		((0x40e8 | ((n) << 9)) << 2)
+#define XCVR_DIAG_LANE_FCM_EN_MGN(n)	((0x40f2 | ((n) << 9)) << 2)
+#define TX_PSC_A0(n)			((0x4100 | ((n) << 9)) << 2)
+#define TX_PSC_A1(n)			((0x4101 | ((n) << 9)) << 2)
+#define TX_PSC_A2(n)			((0x4102 | ((n) << 9)) << 2)
+#define TX_PSC_A3(n)			((0x4103 | ((n) << 9)) << 2)
+#define TX_RCVDET_CTRL(n)		((0x4120 | ((n) << 9)) << 2)
+#define TX_RCVDET_EN_TMR(n)		((0x4122 | ((n) << 9)) << 2)
+#define TX_RCVDET_ST_TMR(n)		((0x4123 | ((n) << 9)) << 2)
+#define TX_DIAG_TX_DRV(n)		((0x41e1 | ((n) << 9)) << 2)
+#define TX_DIAG_BGREF_PREDRV_DELAY	(0x41e7 << 2)
+#define TX_ANA_CTRL_REG_1		(0x5020 << 2)
+#define TX_ANA_CTRL_REG_2		(0x5021 << 2)
+#define TXDA_COEFF_CALC_CTRL		(0x5022 << 2)
+#define TX_DIG_CTRL_REG_2		(0x5024 << 2)
+#define TXDA_CYA_AUXDA_CYA		(0x5025 << 2)
+#define TX_ANA_CTRL_REG_3		(0x5026 << 2)
+#define TX_ANA_CTRL_REG_4		(0x5027 << 2)
+#define TX_ANA_CTRL_REG_5		(0x5029 << 2)
+
+#define RX_PSC_A0(n)			((0x8000 | ((n) << 9)) << 2)
+#define RX_PSC_A1(n)			((0x8001 | ((n) << 9)) << 2)
+#define RX_PSC_A2(n)			((0x8002 | ((n) << 9)) << 2)
+#define RX_PSC_A3(n)			((0x8003 | ((n) << 9)) << 2)
+#define RX_PSC_CAL(n)			((0x8006 | ((n) << 9)) << 2)
+#define RX_PSC_RDY(n)			((0x8007 | ((n) << 9)) << 2)
+#define RX_IQPI_ILL_CAL_OVRD		(0x8023 << 2)
+#define RX_EPI_ILL_CAL_OVRD		(0x8033 << 2)
+#define RX_SDCAL0_OVRD			(0x8041 << 2)
+#define RX_SDCAL1_OVRD			(0x8049 << 2)
+#define RX_SLC_INIT			(0x806d << 2)
+#define RX_SLC_RUN			(0x806e << 2)
+#define RX_CDRLF_CNFG2			(0x8081 << 2)
+#define RX_SIGDET_HL_FILT_TMR(n)	((0x8090 | ((n) << 9)) << 2)
+#define RX_SLC_IOP0_OVRD		(0x8101 << 2)
+#define RX_SLC_IOP1_OVRD		(0x8105 << 2)
+#define RX_SLC_QOP0_OVRD		(0x8109 << 2)
+#define RX_SLC_QOP1_OVRD		(0x810d << 2)
+#define RX_SLC_EOP0_OVRD		(0x8111 << 2)
+#define RX_SLC_EOP1_OVRD		(0x8115 << 2)
+#define RX_SLC_ION0_OVRD		(0x8119 << 2)
+#define RX_SLC_ION1_OVRD		(0x811d << 2)
+#define RX_SLC_QON0_OVRD		(0x8121 << 2)
+#define RX_SLC_QON1_OVRD		(0x8125 << 2)
+#define RX_SLC_EON0_OVRD		(0x8129 << 2)
+#define RX_SLC_EON1_OVRD		(0x812d << 2)
+#define RX_SLC_IEP0_OVRD		(0x8131 << 2)
+#define RX_SLC_IEP1_OVRD		(0x8135 << 2)
+#define RX_SLC_QEP0_OVRD		(0x8139 << 2)
+#define RX_SLC_QEP1_OVRD		(0x813d << 2)
+#define RX_SLC_EEP0_OVRD		(0x8141 << 2)
+#define RX_SLC_EEP1_OVRD		(0x8145 << 2)
+#define RX_SLC_IEN0_OVRD		(0x8149 << 2)
+#define RX_SLC_IEN1_OVRD		(0x814d << 2)
+#define RX_SLC_QEN0_OVRD		(0x8151 << 2)
+#define RX_SLC_QEN1_OVRD		(0x8155 << 2)
+#define RX_SLC_EEN0_OVRD		(0x8159 << 2)
+#define RX_SLC_EEN1_OVRD		(0x815d << 2)
+#define RX_DIAG_SIGDET_TUNE(n)		((0x81dc | ((n) << 9)) << 2)
+#define RX_DIAG_SC2C_DELAY		(0x81e1 << 2)
+
+#define PMA_LANE_CFG			(0xc000 << 2)
+#define PIPE_CMN_CTRL1			(0xc001 << 2)
+#define PIPE_CMN_CTRL2			(0xc002 << 2)
+#define PIPE_COM_LOCK_CFG1		(0xc003 << 2)
+#define PIPE_COM_LOCK_CFG2		(0xc004 << 2)
+#define PIPE_RCV_DET_INH		(0xc005 << 2)
+#define DP_MODE_CTL			(0xc008 << 2)
+#define DP_CLK_CTL			(0xc009 << 2)
+#define STS				(0xc00F << 2)
+#define PHY_ISO_CMN_CTRL		(0xc010 << 2)
+#define PHY_DP_TX_CTL			(0xc408 << 2)
+#define PMA_CMN_CTRL1			(0xc800 << 2)
+#define PHY_PMA_ISO_CMN_CTRL		(0xc810 << 2)
+#define PHY_ISOLATION_CTRL		(0xc81f << 2)
+#define PHY_PMA_ISO_XCVR_CTRL(n)	((0xcc11 | ((n) << 6)) << 2)
+#define PHY_PMA_ISO_LINK_MODE(n)	((0xcc12 | ((n) << 6)) << 2)
+#define PHY_PMA_ISO_PWRST_CTRL(n)	((0xcc13 | ((n) << 6)) << 2)
+#define PHY_PMA_ISO_TX_DATA_LO(n)	((0xcc14 | ((n) << 6)) << 2)
+#define PHY_PMA_ISO_TX_DATA_HI(n)	((0xcc15 | ((n) << 6)) << 2)
+#define PHY_PMA_ISO_RX_DATA_LO(n)	((0xcc16 | ((n) << 6)) << 2)
+#define PHY_PMA_ISO_RX_DATA_HI(n)	((0xcc17 | ((n) << 6)) << 2)
+#define TX_BIST_CTRL(n)			((0x4140 | ((n) << 9)) << 2)
+#define TX_BIST_UDDWR(n)		((0x4141 | ((n) << 9)) << 2)
+
+/*
+ * Selects which PLL clock will be driven on the analog high speed
+ * clock 0: PLL 0 div 1
+ * clock 1: PLL 1 div 2
+ */
+#define CLK_PLL_CONFIG			0X30
+#define CLK_PLL_MASK			0x33
+
+#define CMN_READY			BIT(0)
+
+#define DP_PLL_CLOCK_ENABLE		BIT(2)
+#define DP_PLL_ENABLE			BIT(0)
+#define DP_PLL_DATA_RATE_RBR		((2 << 12) | (4 << 8))
+#define DP_PLL_DATA_RATE_HBR		((2 << 12) | (4 << 8))
+#define DP_PLL_DATA_RATE_HBR2		((1 << 12) | (2 << 8))
+
+#define GRF_SOC_CON26			0x6268
+#define UPHY_DP_SEL			BIT(3)
+#define UPHY_DP_SEL_MASK		BIT(19)
+#define DPTX_HPD_SEL			(3 << 12)
+#define DPTX_HPD_DEL			(2 << 12)
+#define DPTX_HPD_SEL_MASK		(3 << 28)
+
+#define DP_MODE_A0			BIT(4)
+#define DP_MODE_A2			BIT(6)
+#define DP_MODE_ENTER_A0		0xc101
+#define DP_MODE_ENTER_A2		0xc104
+
+#define PHY_MODE_SET_TIMEOUT		100000
+
+#define PIN_ASSIGN_C_E			0x51d9
+#define PIN_ASSIGN_D_F			0x5100
+
+#define MODE_DISCONNECT			0
+#define MODE_UFP_USB			BIT(0)
+#define MODE_DFP_USB			BIT(1)
+#define MODE_DFP_DP			BIT(2)
+
+struct usb3phy_reg {
+	u32 offset;
+	u32 enable_bit;
+	u32 write_enable;
+};
+
+struct rockchip_usb3phy_port_cfg {
+	struct usb3phy_reg typec_conn_dir;
+	struct usb3phy_reg usb3tousb2_en;
+	struct usb3phy_reg external_psm;
+	struct usb3phy_reg pipe_status;
+	struct usb3phy_reg uphy_dp_sel;
+};
+
+struct rockchip_typec_phy {
+	struct device *dev;
+	void __iomem *base;
+	struct extcon_dev *extcon;
+	struct phy *phy[2];
+	struct regmap *grf_regs;
+	struct clk *clk_core;
+	struct clk *clk_ref;
+	struct reset_control *uphy_rst;
+	struct reset_control *pipe_rst;
+	struct reset_control *tcphy_rst;
+	struct rockchip_usb3phy_port_cfg port_cfgs;
+	/* mutex to protect access to individual PHYs */
+	struct mutex lock;
+
+	bool flip;
+	u8 mode;
+};
+
+struct phy_reg {
+	u16 value;
+	u32 addr;
+};
+
+struct phy_reg usb_pll_cfg[] = {
+	{ 0xf0,		CMN_PLL0_VCOCAL_INIT },
+	{ 0x18,		CMN_PLL0_VCOCAL_ITER },
+	{ 0xd0,		CMN_PLL0_INTDIV },
+	{ 0x4a4a,	CMN_PLL0_FRACDIV },
+	{ 0x34,		CMN_PLL0_HIGH_THR },
+	{ 0x1ee,	CMN_PLL0_SS_CTRL1 },
+	{ 0x7f03,	CMN_PLL0_SS_CTRL2 },
+	{ 0x20,		CMN_PLL0_DSM_DIAG },
+	{ 0,		CMN_DIAG_PLL0_OVRD },
+	{ 0,		CMN_DIAG_PLL0_FBH_OVRD },
+	{ 0,		CMN_DIAG_PLL0_FBL_OVRD },
+	{ 0x7,		CMN_DIAG_PLL0_V2I_TUNE },
+	{ 0x45,		CMN_DIAG_PLL0_CP_TUNE },
+	{ 0x8,		CMN_DIAG_PLL0_LF_PROG },
+};
+
+struct phy_reg dp_pll_cfg[] = {
+	{ 0xf0,		CMN_PLL1_VCOCAL_INIT },
+	{ 0x18,		CMN_PLL1_VCOCAL_ITER },
+	{ 0x30b9,	CMN_PLL1_VCOCAL_START },
+	{ 0x21c,	CMN_PLL1_INTDIV },
+	{ 0,		CMN_PLL1_FRACDIV },
+	{ 0x5,		CMN_PLL1_HIGH_THR },
+	{ 0x35,		CMN_PLL1_SS_CTRL1 },
+	{ 0x7f1e,	CMN_PLL1_SS_CTRL2 },
+	{ 0x20,		CMN_PLL1_DSM_DIAG },
+	{ 0,		CMN_PLLSM1_USER_DEF_CTRL },
+	{ 0,		CMN_DIAG_PLL1_OVRD },
+	{ 0,		CMN_DIAG_PLL1_FBH_OVRD },
+	{ 0,		CMN_DIAG_PLL1_FBL_OVRD },
+	{ 0x6,		CMN_DIAG_PLL1_V2I_TUNE },
+	{ 0x45,		CMN_DIAG_PLL1_CP_TUNE },
+	{ 0x8,		CMN_DIAG_PLL1_LF_PROG },
+	{ 0x100,	CMN_DIAG_PLL1_PTATIS_TUNE1 },
+	{ 0x7,		CMN_DIAG_PLL1_PTATIS_TUNE2 },
+	{ 0x4,		CMN_DIAG_PLL1_INCLK_CTRL },
+};
+
+static void tcphy_cfg_24m(struct rockchip_typec_phy *tcphy)
+{
+	u32 i, rdata;
+
+	/*
+	 * cmn_ref_clk_sel = 3, select the 24Mhz for clk parent
+	 * cmn_psm_clk_dig_div = 2, set the clk division to 2
+	 */
+	writel(0x830, tcphy->base + PMA_CMN_CTRL1);
+	for (i = 0; i < 4; i++) {
+		/*
+		 * The following PHY configuration assumes a 24 MHz reference
+		 * clock.
+		 */
+		writel(0x90, tcphy->base + XCVR_DIAG_LANE_FCM_EN_MGN(i));
+		writel(0x960, tcphy->base + TX_RCVDET_EN_TMR(i));
+		writel(0x30, tcphy->base + TX_RCVDET_ST_TMR(i));
+	}
+
+	rdata = readl(tcphy->base + CMN_DIAG_HSCLK_SEL);
+	rdata &= ~CLK_PLL_MASK;
+	rdata |= CLK_PLL_CONFIG;
+	writel(rdata, tcphy->base + CMN_DIAG_HSCLK_SEL);
+}
+
+static void tcphy_cfg_usb_pll(struct rockchip_typec_phy *tcphy)
+{
+	u32 i;
+
+	/* load the configuration of PLL0 */
+	for (i = 0; i < ARRAY_SIZE(usb_pll_cfg); i++)
+		writel(usb_pll_cfg[i].value, tcphy->base + usb_pll_cfg[i].addr);
+}
+
+static void tcphy_cfg_dp_pll(struct rockchip_typec_phy *tcphy)
+{
+	u32 i;
+
+	/* set the default mode to RBR */
+	writel(DP_PLL_CLOCK_ENABLE | DP_PLL_ENABLE | DP_PLL_DATA_RATE_RBR,
+	       tcphy->base + DP_CLK_CTL);
+
+	/* load the configuration of PLL1 */
+	for (i = 0; i < ARRAY_SIZE(dp_pll_cfg); i++)
+		writel(dp_pll_cfg[i].value, tcphy->base + dp_pll_cfg[i].addr);
+}
+
+static void tcphy_tx_usb_cfg_lane(struct rockchip_typec_phy *tcphy, u32 lane)
+{
+	writel(0x7799, tcphy->base + TX_PSC_A0(lane));
+	writel(0x7798, tcphy->base + TX_PSC_A1(lane));
+	writel(0x5098, tcphy->base + TX_PSC_A2(lane));
+	writel(0x5098, tcphy->base + TX_PSC_A3(lane));
+	writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_000(lane));
+	writel(0xbf, tcphy->base + XCVR_DIAG_BIDI_CTRL(lane));
+}
+
+static void tcphy_rx_usb_cfg_lane(struct rockchip_typec_phy *tcphy, u32 lane)
+{
+	writel(0xa6fd, tcphy->base + RX_PSC_A0(lane));
+	writel(0xa6fd, tcphy->base + RX_PSC_A1(lane));
+	writel(0xa410, tcphy->base + RX_PSC_A2(lane));
+	writel(0x2410, tcphy->base + RX_PSC_A3(lane));
+	writel(0x23ff, tcphy->base + RX_PSC_CAL(lane));
+	writel(0x13, tcphy->base + RX_SIGDET_HL_FILT_TMR(lane));
+	writel(0x1004, tcphy->base + RX_DIAG_SIGDET_TUNE(lane));
+	writel(0x2010, tcphy->base + RX_PSC_RDY(lane));
+	writel(0xfb, tcphy->base + XCVR_DIAG_BIDI_CTRL(lane));
+}
+
+static void tcphy_dp_cfg_lane(struct rockchip_typec_phy *tcphy, u32 lane)
+{
+	u16 rdata;
+
+	writel(0xbefc, tcphy->base + XCVR_PSM_RCTRL(lane));
+	writel(0x6799, tcphy->base + TX_PSC_A0(lane));
+	writel(0x6798, tcphy->base + TX_PSC_A1(lane));
+	writel(0x98, tcphy->base + TX_PSC_A2(lane));
+	writel(0x98, tcphy->base + TX_PSC_A3(lane));
+
+	writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_000(lane));
+	writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_001(lane));
+	writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_010(lane));
+	writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_011(lane));
+	writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_100(lane));
+	writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_101(lane));
+	writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_110(lane));
+	writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_111(lane));
+	writel(0, tcphy->base + TX_TXCC_CPOST_MULT_10(lane));
+	writel(0, tcphy->base + TX_TXCC_CPOST_MULT_01(lane));
+	writel(0, tcphy->base + TX_TXCC_CPOST_MULT_00(lane));
+	writel(0, tcphy->base + TX_TXCC_CPOST_MULT_11(lane));
+
+	writel(0x128, tcphy->base + TX_TXCC_CAL_SCLR_MULT(lane));
+	writel(0x400, tcphy->base + TX_DIAG_TX_DRV(lane));
+
+	rdata = readl(tcphy->base + XCVR_DIAG_PLLDRC_CTRL(lane));
+	rdata = (rdata & 0x8fff) | 0x6000;
+	writel(rdata, tcphy->base + XCVR_DIAG_PLLDRC_CTRL(lane));
+}
+
+static inline int property_enable(struct rockchip_typec_phy *tcphy,
+				  const struct usb3phy_reg *reg, bool en)
+{
+	u32 mask = 1 << reg->write_enable;
+	u32 val = en << reg->enable_bit;
+
+	return regmap_write(tcphy->grf_regs, reg->offset, val | mask);
+}
+
+static void tcphy_dp_aux_calibration(struct rockchip_typec_phy *tcphy)
+{
+	u16 rdata, rdata2, val;
+
+	/* disable txda_cal_latch_en for rewrite the calibration values */
+	rdata = readl(tcphy->base + TX_ANA_CTRL_REG_1);
+	val = rdata & 0xdfff;
+	writel(val, tcphy->base + TX_ANA_CTRL_REG_1);
+
+	/*
+	 * read a resistor calibration code from CMN_TXPUCAL_CTRL[6:0] and
+	 * write it to TX_DIG_CTRL_REG_2[6:0], and delay 1ms to make sure it
+	 * works.
+	 */
+	rdata = readl(tcphy->base + TX_DIG_CTRL_REG_2);
+	rdata = rdata & 0xffc0;
+
+	rdata2 = readl(tcphy->base + CMN_TXPUCAL_CTRL);
+	rdata2 = rdata2 & 0x3f;
+
+	val = rdata | rdata2;
+	writel(val, tcphy->base + TX_DIG_CTRL_REG_2);
+	usleep_range(1000, 1050);
+
+	/*
+	 * Enable signal for latch that sample and holds calibration values.
+	 * Activate this signal for 1 clock cycle to sample new calibration
+	 * values.
+	 */
+	rdata = readl(tcphy->base + TX_ANA_CTRL_REG_1);
+	val = rdata | 0x2000;
+	writel(val, tcphy->base + TX_ANA_CTRL_REG_1);
+	usleep_range(150, 200);
+
+	/* set TX Voltage Level and TX Deemphasis to 0 */
+	writel(0, tcphy->base + PHY_DP_TX_CTL);
+	/* re-enable decap */
+	writel(0x100, tcphy->base + TX_ANA_CTRL_REG_2);
+	writel(0x300, tcphy->base + TX_ANA_CTRL_REG_2);
+	writel(0x2008, tcphy->base + TX_ANA_CTRL_REG_1);
+	writel(0x2018, tcphy->base + TX_ANA_CTRL_REG_1);
+
+	writel(0, tcphy->base + TX_ANA_CTRL_REG_5);
+
+	/*
+	 * Programs txda_drv_ldo_prog[15:0], Sets driver LDO
+	 * voltage 16'h1001 for DP-AUX-TX and RX
+	 */
+	writel(0x1001, tcphy->base + TX_ANA_CTRL_REG_4);
+
+	/* re-enables Bandgap reference for LDO */
+	writel(0x2098, tcphy->base + TX_ANA_CTRL_REG_1);
+	writel(0x2198, tcphy->base + TX_ANA_CTRL_REG_1);
+
+	/*
+	 * re-enables the transmitter pre-driver, driver data selection MUX,
+	 * and receiver detect circuits.
+	 */
+	writel(0x301, tcphy->base + TX_ANA_CTRL_REG_2);
+	writel(0x303, tcphy->base + TX_ANA_CTRL_REG_2);
+
+	/*
+	 * BIT 12: Controls auxda_polarity, which selects the polarity of the
+	 * xcvr:
+	 * 1, Reverses the polarity (If TYPEC, Pulls ups aux_p and pull
+	 * down aux_m)
+	 * 0, Normal polarity (if TYPE_C, pulls up aux_m and pulls down
+	 * aux_p)
+	 */
+	val = 0xa078;
+	if (!tcphy->flip)
+		val |= BIT(12);
+	writel(val, tcphy->base + TX_ANA_CTRL_REG_1);
+
+	writel(0, tcphy->base + TX_ANA_CTRL_REG_3);
+	writel(0, tcphy->base + TX_ANA_CTRL_REG_4);
+	writel(0, tcphy->base + TX_ANA_CTRL_REG_5);
+
+	/*
+	 * Controls low_power_swing_en, set the voltage swing of the driver
+	 * to 400mv. The values	below are peak to peak (differential) values.
+	 */
+	writel(4, tcphy->base + TXDA_COEFF_CALC_CTRL);
+	writel(0, tcphy->base + TXDA_CYA_AUXDA_CYA);
+
+	/* Controls tx_high_z_tm_en */
+	val = readl(tcphy->base + TX_DIG_CTRL_REG_2);
+	val |= BIT(15);
+	writel(val, tcphy->base + TX_DIG_CTRL_REG_2);
+}
+
+static int tcphy_phy_init(struct rockchip_typec_phy *tcphy, u8 mode)
+{
+	struct rockchip_usb3phy_port_cfg *cfg = &tcphy->port_cfgs;
+	int ret, i;
+	u32 val;
+
+	ret = clk_prepare_enable(tcphy->clk_core);
+	if (ret) {
+		dev_err(tcphy->dev, "Failed to prepare_enable core clock\n");
+		return ret;
+	}
+
+	ret = clk_prepare_enable(tcphy->clk_ref);
+	if (ret) {
+		dev_err(tcphy->dev, "Failed to prepare_enable ref clock\n");
+		goto err_clk_core;
+	}
+
+	reset_control_deassert(tcphy->tcphy_rst);
+
+	property_enable(tcphy, &cfg->typec_conn_dir, tcphy->flip);
+
+	tcphy_cfg_24m(tcphy);
+
+	if (mode == MODE_DFP_DP) {
+		tcphy_cfg_dp_pll(tcphy);
+		for (i = 0; i < 4; i++)
+			tcphy_dp_cfg_lane(tcphy, i);
+
+		writel(PIN_ASSIGN_C_E, tcphy->base + PMA_LANE_CFG);
+	} else {
+		tcphy_cfg_usb_pll(tcphy);
+		tcphy_cfg_dp_pll(tcphy);
+		if (tcphy->flip) {
+			tcphy_tx_usb_cfg_lane(tcphy, 3);
+			tcphy_rx_usb_cfg_lane(tcphy, 2);
+			tcphy_dp_cfg_lane(tcphy, 0);
+			tcphy_dp_cfg_lane(tcphy, 1);
+		} else {
+			tcphy_tx_usb_cfg_lane(tcphy, 0);
+			tcphy_rx_usb_cfg_lane(tcphy, 1);
+			tcphy_dp_cfg_lane(tcphy, 2);
+			tcphy_dp_cfg_lane(tcphy, 3);
+		}
+
+		writel(PIN_ASSIGN_D_F, tcphy->base + PMA_LANE_CFG);
+	}
+
+	writel(DP_MODE_ENTER_A2, tcphy->base + DP_MODE_CTL);
+
+	reset_control_deassert(tcphy->uphy_rst);
+
+	ret = readx_poll_timeout(readl, tcphy->base + PMA_CMN_CTRL1,
+				 val, val & CMN_READY, 10,
+				 PHY_MODE_SET_TIMEOUT);
+	if (ret < 0) {
+		dev_err(tcphy->dev, "wait pma ready timeout\n");
+		ret = -ETIMEDOUT;
+		goto err_wait_pma;
+	}
+
+	reset_control_deassert(tcphy->pipe_rst);
+
+	return 0;
+
+err_wait_pma:
+	reset_control_assert(tcphy->uphy_rst);
+	reset_control_assert(tcphy->tcphy_rst);
+	clk_disable_unprepare(tcphy->clk_ref);
+err_clk_core:
+	clk_disable_unprepare(tcphy->clk_core);
+	return ret;
+}
+
+static void tcphy_phy_deinit(struct rockchip_typec_phy *tcphy)
+{
+	reset_control_assert(tcphy->tcphy_rst);
+	reset_control_assert(tcphy->uphy_rst);
+	reset_control_assert(tcphy->pipe_rst);
+	clk_disable_unprepare(tcphy->clk_core);
+	clk_disable_unprepare(tcphy->clk_ref);
+}
+
+static int tcphy_get_mode(struct rockchip_typec_phy *tcphy)
+{
+	struct extcon_dev *edev = tcphy->extcon;
+	union extcon_property_value property;
+	unsigned int id;
+	bool dfp, ufp, dp;
+	u8 mode;
+	int ret;
+
+	ufp = extcon_get_state(edev, EXTCON_USB);
+	dfp = extcon_get_state(edev, EXTCON_USB_HOST);
+	dp = extcon_get_state(edev, EXTCON_DISP_DP);
+
+	mode = MODE_DFP_USB;
+	id = EXTCON_USB_HOST;
+
+	if (ufp) {
+		mode = MODE_UFP_USB;
+		id = EXTCON_USB;
+	} else if (dfp && dp) {
+		mode = MODE_DFP_USB | MODE_DFP_DP;
+	} else if (dp) {
+		mode = MODE_DFP_DP;
+		id = EXTCON_DISP_DP;
+	}
+
+	ret = extcon_get_property(edev, id, EXTCON_PROP_USB_TYPEC_POLARITY,
+				  &property);
+	if (ret) {
+		dev_err(tcphy->dev, "get property failed\n");
+		return ret;
+	}
+
+	tcphy->flip = property.intval ? 1 : 0;
+
+	return mode;
+}
+
+static int rockchip_usb3_phy_power_on(struct phy *phy)
+{
+	struct rockchip_typec_phy *tcphy = phy_get_drvdata(phy);
+	struct rockchip_usb3phy_port_cfg *cfg = &tcphy->port_cfgs;
+	const struct usb3phy_reg *reg = &cfg->pipe_status;
+	int timeout, ret = 0;
+	u32 val;
+	u8 new_mode;
+
+	mutex_lock(&tcphy->lock);
+
+	new_mode = tcphy_get_mode(tcphy);
+	if (new_mode < 0) {
+		ret = new_mode;
+		goto unlock_ret;
+	}
+
+	if (!(new_mode & (MODE_DFP_USB | MODE_UFP_USB))) {
+		ret = -ENODEV;
+		goto unlock_ret;
+	}
+
+	if (tcphy->mode == new_mode)
+		goto unlock_ret;
+
+	if (tcphy->mode == MODE_DISCONNECT)
+		tcphy_phy_init(tcphy, new_mode);
+
+	/* wait TCPHY for pipe ready */
+	for (timeout = 0; timeout < 100; timeout++) {
+		regmap_read(tcphy->grf_regs, reg->offset, &val);
+		if (!(val & BIT(reg->enable_bit))) {
+			tcphy->mode |= new_mode & (MODE_DFP_USB | MODE_UFP_USB);
+			goto unlock_ret;
+		}
+		usleep_range(10, 20);
+	}
+
+	if (tcphy->mode == MODE_DISCONNECT)
+		tcphy_phy_deinit(tcphy);
+
+	ret = -ETIMEDOUT;
+
+unlock_ret:
+	mutex_unlock(&tcphy->lock);
+	return ret;
+}
+
+static int rockchip_usb3_phy_power_off(struct phy *phy)
+{
+	struct rockchip_typec_phy *tcphy = phy_get_drvdata(phy);
+
+	if (tcphy->mode == MODE_DISCONNECT)
+		goto unlock;
+
+	mutex_lock(&tcphy->lock);
+
+	tcphy->mode &= ~(MODE_UFP_USB | MODE_DFP_USB);
+	if (tcphy->mode == MODE_DISCONNECT)
+		tcphy_phy_deinit(tcphy);
+
+unlock:
+	mutex_unlock(&tcphy->lock);
+	return 0;
+}
+
+static const struct phy_ops rockchip_usb3_phy_ops = {
+	.power_on	= rockchip_usb3_phy_power_on,
+	.power_off	= rockchip_usb3_phy_power_off,
+	.owner		= THIS_MODULE,
+};
+
+static int rockchip_dp_phy_power_on(struct phy *phy)
+{
+	struct rockchip_typec_phy *tcphy = phy_get_drvdata(phy);
+	struct rockchip_usb3phy_port_cfg *cfg = &tcphy->port_cfgs;
+	u32 val;
+	u8 new_mode;
+	int ret = 0;
+
+	mutex_lock(&tcphy->lock);
+
+	new_mode = tcphy_get_mode(tcphy);
+	if (new_mode < 0) {
+		ret = new_mode;
+		goto unlock_ret;
+	}
+
+	if (!(new_mode & (MODE_DFP_DP))) {
+		ret = -ENODEV;
+		goto unlock_ret;
+	}
+
+	if (tcphy->mode == new_mode)
+		goto unlock_ret;
+
+	/*
+	 * If the PHY has been power on, but the mode is not DP only mode,
+	 * re-init the PHY for setting all of 4 lanes to DP.
+	 */
+	if (new_mode == MODE_DFP_DP && tcphy->mode != MODE_DISCONNECT) {
+		tcphy_phy_deinit(tcphy);
+		tcphy_phy_init(tcphy, new_mode);
+	} else if (tcphy->mode == MODE_DISCONNECT) {
+		tcphy_phy_init(tcphy, new_mode);
+	}
+
+	property_enable(tcphy, &cfg->uphy_dp_sel, 1);
+
+	ret = readx_poll_timeout(readl, tcphy->base + DP_MODE_CTL,
+				 val, val & DP_MODE_A2, 1000,
+				 PHY_MODE_SET_TIMEOUT);
+	if (ret < 0) {
+		dev_err(tcphy->dev, "failed to wait TCPHY enter A2\n");
+		goto power_on_finish;
+	}
+
+	tcphy_dp_aux_calibration(tcphy);
+
+	writel(DP_MODE_ENTER_A0, tcphy->base + DP_MODE_CTL);
+
+	ret = readx_poll_timeout(readl, tcphy->base + DP_MODE_CTL,
+				 val, val & DP_MODE_A0, 1000,
+				 PHY_MODE_SET_TIMEOUT);
+	if (ret < 0) {
+		writel(DP_MODE_ENTER_A2, tcphy->base + DP_MODE_CTL);
+		dev_err(tcphy->dev, "failed to wait TCPHY enter A0\n");
+		goto power_on_finish;
+	}
+
+	regmap_write(tcphy->grf_regs, GRF_SOC_CON26,
+		     DPTX_HPD_SEL_MASK | DPTX_HPD_SEL);
+
+	tcphy->mode |= MODE_DFP_DP;
+
+power_on_finish:
+	if (tcphy->mode == MODE_DISCONNECT)
+		tcphy_phy_deinit(tcphy);
+unlock_ret:
+	mutex_unlock(&tcphy->lock);
+	return ret;
+}
+
+static int rockchip_dp_phy_power_off(struct phy *phy)
+{
+	struct rockchip_typec_phy *tcphy = phy_get_drvdata(phy);
+
+	mutex_lock(&tcphy->lock);
+
+	if (tcphy->mode == MODE_DISCONNECT)
+		goto unlock;
+
+	tcphy->mode &= ~MODE_DFP_DP;
+	regmap_write(tcphy->grf_regs, GRF_SOC_CON26,
+		     DPTX_HPD_SEL_MASK | DPTX_HPD_DEL);
+
+	writel(DP_MODE_ENTER_A2, tcphy->base + DP_MODE_CTL);
+
+	if (tcphy->mode == MODE_DISCONNECT)
+		tcphy_phy_deinit(tcphy);
+
+unlock:
+	mutex_unlock(&tcphy->lock);
+	return 0;
+}
+
+static const struct phy_ops rockchip_dp_phy_ops = {
+	.power_on	= rockchip_dp_phy_power_on,
+	.power_off	= rockchip_dp_phy_power_off,
+	.owner		= THIS_MODULE,
+};
+
+static int tcphy_get_param(struct device *dev,
+			   struct usb3phy_reg *reg,
+			   const char *name)
+{
+	u32 buffer[3];
+	int ret;
+
+	ret = of_property_read_u32_array(dev->of_node, name, buffer, 3);
+	if (ret) {
+		dev_err(dev, "Can not parse %s\n", name);
+		return ret;
+	}
+
+	reg->offset = buffer[0];
+	reg->enable_bit = buffer[1];
+	reg->write_enable = buffer[2];
+	return 0;
+}
+
+static int tcphy_parse_dt(struct rockchip_typec_phy *tcphy,
+			  struct device *dev)
+{
+	struct rockchip_usb3phy_port_cfg *cfg = &tcphy->port_cfgs;
+	int ret;
+
+	ret = tcphy_get_param(dev, &cfg->typec_conn_dir,
+			      "rockchip,typec-conn-dir");
+	if (ret)
+		return ret;
+
+	ret = tcphy_get_param(dev, &cfg->usb3tousb2_en,
+			      "rockchip,usb3tousb2-en");
+	if (ret)
+		return ret;
+
+	ret = tcphy_get_param(dev, &cfg->external_psm,
+			      "rockchip,external-psm");
+	if (ret)
+		return ret;
+
+	ret = tcphy_get_param(dev, &cfg->pipe_status,
+			      "rockchip,pipe-status");
+	if (ret)
+		return ret;
+
+	ret = tcphy_get_param(dev, &cfg->uphy_dp_sel,
+			      "rockchip,uphy-dp-sel");
+	if (ret)
+		return ret;
+
+	tcphy->grf_regs = syscon_regmap_lookup_by_phandle(dev->of_node,
+							  "rockchip,grf");
+	if (IS_ERR(tcphy->grf_regs)) {
+		dev_err(dev, "could not find grf dt node\n");
+		return PTR_ERR(tcphy->grf_regs);
+	}
+
+	tcphy->clk_core = devm_clk_get(dev, "tcpdcore");
+	if (IS_ERR(tcphy->clk_core)) {
+		dev_err(dev, "could not get uphy core clock\n");
+		return PTR_ERR(tcphy->clk_core);
+	}
+
+	tcphy->clk_ref = devm_clk_get(dev, "tcpdphy-ref");
+	if (IS_ERR(tcphy->clk_ref)) {
+		dev_err(dev, "could not get uphy ref clock\n");
+		return PTR_ERR(tcphy->clk_ref);
+	}
+
+	tcphy->uphy_rst = devm_reset_control_get(dev, "uphy");
+	if (IS_ERR(tcphy->uphy_rst)) {
+		dev_err(dev, "no uphy_rst reset control found\n");
+		return PTR_ERR(tcphy->uphy_rst);
+	}
+
+	tcphy->pipe_rst = devm_reset_control_get(dev, "uphy-pipe");
+	if (IS_ERR(tcphy->pipe_rst)) {
+		dev_err(dev, "no pipe_rst reset control found\n");
+		return PTR_ERR(tcphy->pipe_rst);
+	}
+
+	tcphy->tcphy_rst = devm_reset_control_get(dev, "uphy-tcphy");
+	if (IS_ERR(tcphy->tcphy_rst)) {
+		dev_err(dev, "no tcphy_rst reset control found\n");
+		return PTR_ERR(tcphy->tcphy_rst);
+	}
+
+	return 0;
+}
+
+static void typec_phy_pre_init(struct rockchip_typec_phy *tcphy)
+{
+	struct rockchip_usb3phy_port_cfg *cfg = &tcphy->port_cfgs;
+
+	reset_control_assert(tcphy->tcphy_rst);
+	reset_control_assert(tcphy->uphy_rst);
+	reset_control_assert(tcphy->pipe_rst);
+
+	/* select external psm clock */
+	property_enable(tcphy, &cfg->external_psm, 1);
+	property_enable(tcphy, &cfg->usb3tousb2_en, 0);
+
+	tcphy->mode = MODE_DISCONNECT;
+}
+
+static struct phy *tcphy_phy_xlate(struct device *dev,
+				   struct of_phandle_args *args)
+{
+	struct rockchip_typec_phy *tcphy = dev_get_drvdata(dev);
+	int i;
+
+	if (WARN_ON(args->args[0] >= 2))
+		return ERR_PTR(-ENODEV);
+
+	for (i = 0; i < 2; i++) {
+		if (i == args->args[0])
+			return tcphy->phy[i];
+	}
+
+	return ERR_PTR(-ENODEV);
+}
+
+static int rockchip_typec_phy_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct rockchip_typec_phy *tcphy;
+	struct phy_provider *phy_provider;
+	struct resource *res;
+	int ret;
+
+	tcphy = devm_kzalloc(dev, sizeof(*tcphy), GFP_KERNEL);
+	if (!tcphy)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	tcphy->base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(tcphy->base))
+		return PTR_ERR(tcphy->base);
+
+	ret = tcphy_parse_dt(tcphy, dev);
+	if (ret)
+		return ret;
+
+	tcphy->dev = dev;
+	platform_set_drvdata(pdev, tcphy);
+	mutex_init(&tcphy->lock);
+
+	typec_phy_pre_init(tcphy);
+
+	tcphy->extcon = extcon_get_edev_by_phandle(dev, 0);
+	if (IS_ERR(tcphy->extcon)) {
+		if (PTR_ERR(tcphy->extcon) != -EPROBE_DEFER)
+			dev_err(dev, "Invalid or missing extcon\n");
+		return PTR_ERR(tcphy->extcon);
+	}
+
+	tcphy->phy[0] = devm_phy_create(dev, NULL, &rockchip_dp_phy_ops);
+	if (IS_ERR(tcphy->phy[0])) {
+		dev_err(dev, "failed to create DP phy\n");
+		return PTR_ERR(tcphy->phy[0]);
+	}
+
+	tcphy->phy[1] = devm_phy_create(dev, NULL, &rockchip_usb3_phy_ops);
+	if (IS_ERR(tcphy->phy[1])) {
+		dev_err(dev, "failed to create USB3 phy\n");
+		return PTR_ERR(tcphy->phy[1]);
+	}
+
+	phy_set_drvdata(tcphy->phy[0], tcphy);
+	phy_set_drvdata(tcphy->phy[1], tcphy);
+
+	phy_provider = devm_of_phy_provider_register(dev, tcphy_phy_xlate);
+	if (IS_ERR(phy_provider)) {
+		dev_err(dev, "Failed to register phy provider\n");
+		return PTR_ERR(phy_provider);
+	}
+
+	return 0;
+}
+
+static const struct of_device_id rockchip_typec_phy_dt_ids[] = {
+	{ .compatible = "rockchip,rk3399-typec-phy" },
+	{}
+};
+
+MODULE_DEVICE_TABLE(of, rockchip_typec_phy_dt_ids);
+
+static struct platform_driver rockchip_typec_phy_driver = {
+	.probe		= rockchip_typec_phy_probe,
+	.driver		= {
+		.name	= "rockchip-typec-phy",
+		.of_match_table = rockchip_typec_phy_dt_ids,
+	},
+};
+
+module_platform_driver(rockchip_typec_phy_driver);
+
+MODULE_AUTHOR("Chris Zhong <zyw@rock-chips.com>");
+MODULE_AUTHOR("Kever Yang <kever.yang@rock-chips.com>");
+MODULE_DESCRIPTION("Rockchip USB TYPE-C PHY driver");
+MODULE_LICENSE("GPL v2");