diff mbox

[V2,1/1] ARM: dts: imx6q-evi: Use GPIO_6 for fec irq

Message ID 1470936916-20913-1-git-send-email-stillcompiling@gmail.com (mailing list archive)
State New, archived
Headers show

Commit Message

Joshua Clayton Aug. 11, 2016, 5:35 p.m. UTC 
Apply hardware workaround for ethernet problem
See nxp erratum err006687

Signed-off-by: Joshua Clayton <stillcompiling@gmail.com>
---

Changed since V1:
- added fsl,err006687-workaround-present; so that it will continue to work

 arch/arm/boot/dts/imx6q-evi.dts | 3 +++
 1 file changed, 3 insertions(+)

Comments

Shawn Guo Aug. 15, 2016, 2:30 p.m. UTC | #1 
On Thu, Aug 11, 2016 at 10:35:16AM -0700, Joshua Clayton wrote:
> Apply hardware workaround for ethernet problem
> See nxp erratum err006687
> 
> Signed-off-by: Joshua Clayton <stillcompiling@gmail.com>

Applied, thanks.
diff mbox

Patch

diff --git a/arch/arm/boot/dts/imx6q-evi.dts b/arch/arm/boot/dts/imx6q-evi.dts
index 49c6f61..33bd04b 100644
--- a/arch/arm/boot/dts/imx6q-evi.dts
+++ b/arch/arm/boot/dts/imx6q-evi.dts
@@ -127,6 +127,8 @@ 
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rgmii";
 	phy-reset-gpios = <&gpio1 25 0>;
+	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
+			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
+	fsl,err006687-workaround-present;
 	status = "okay";
 };
 
@@ -312,6 +314,7 @@ 
 			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
 			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x4001b0a8
 			MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0
+			MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1
 		>;
 	};