diff mbox

[v3,1/2] ARM: dts: Add MDM9615 dtsi

Message ID 1471951850-29842-2-git-send-email-narmstrong@baylibre.com (mailing list archive)
State New, archived
Headers show

Commit Message

Neil Armstrong Aug. 23, 2016, 11:30 a.m. UTC
In order to support the Qualcomm MDM9615 SoC, add the SoC dtsi.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 arch/arm/boot/dts/qcom-mdm9615.dtsi | 555 ++++++++++++++++++++++++++++++++++++
 1 file changed, 555 insertions(+)
 create mode 100644 arch/arm/boot/dts/qcom-mdm9615.dtsi

Comments

Stephen Boyd Aug. 26, 2016, 5:55 p.m. UTC | #1
On 08/23, Neil Armstrong wrote:
> diff --git a/arch/arm/boot/dts/qcom-mdm9615.dtsi b/arch/arm/boot/dts/qcom-mdm9615.dtsi
> new file mode 100644
> index 0000000..e30bfbd
> --- /dev/null
> +++ b/arch/arm/boot/dts/qcom-mdm9615.dtsi
> +/ {
> +	model = "Qualcomm MDM9615";
> +	compatible = "qcom,mdm9615";
> +	interrupt-parent = <&intc>;
> +
> +	cpus {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		cpu0: cpu@0 {
> +			compatible = "arm,cortex-a5";
> +			device_type = "cpu";
> +			next-level-cache = <&L2>;
> +		};
> +	};
> +
> +	cpu-pmu {
> +		compatible = "arm,cortex-a5-pmu";
> +		interrupts = <GIC_SPI 10 0x304>;

Should be 0x104? Or GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH?

> +	};
> +
> +	clocks {
> +		cxo_board {
> +			compatible = "fixed-clock";
> +			#clock-cells = <0>;
> +			clock-frequency = <19200000>;
> +		};
> +	};
> +
> +	regulators {

This doesn't need to be a simple bus? so that the child devices
probe? That's good if so.

> +		vsdcc_fixed: vsdcc-regulator {
> +			compatible = "regulator-fixed";
> +			regulator-name = "SDCC Power";
> +			regulator-min-microvolt = <2700000>;
> +			regulator-max-microvolt = <2700000>;
> +			regulator-always-on;
> +		};
> +	};
> +
> +	soc: soc {
[...]
> +		L2: l2-cache {

Missing unit address.

> +			compatible = "arm,pl310-cache";
> +			reg = <0x02040000 0x1000>;
> +			arm,data-latency = <2 2 0>;
> +			cache-unified;
> +			cache-level = <2>;
> +		};
[..]
> +
> +		qcom,ssbi@500000 {
> +			compatible = "qcom,ssbi";
> +			reg = <0x500000 0x1000>;
> +			qcom,controller-type = "pmic-arbiter";
> +
> +			pmicintc: pmic@0 {
> +				compatible = "qcom,pm8018", "qcom,pm8921";
> +				interrupts = <GIC_PPI 226 IRQ_TYPE_LEVEL_HIGH>;
> +				#interrupt-cells = <2>;
> +				interrupt-controller;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +
> +				pwrkey@1c {
> +					compatible = "qcom,pm8018-pwrkey", "qcom,pm8921-pwrkey";
> +					reg = <0x1c>;
> +					interrupt-parent = <&pmicintc>;
> +					interrupts = <50 IRQ_TYPE_NONE>,
> +						     <51 IRQ_TYPE_NONE>;

IRQ_TYPE_EDGE_RISING?

> +					debounce = <15625>;
> +					pull-up;
> +				};
> +
> +				pmicmpp: mpp@50 {
> +					compatible = "qcom,pm8018-mpp", "qcom,ssbi-mpp";
> +					interrupt-parent = <&pmicintc>;
> +					interrupts = <24 IRQ_TYPE_NONE>,
> +						     <25 IRQ_TYPE_NONE>,
> +						     <26 IRQ_TYPE_NONE>,
> +						     <27 IRQ_TYPE_NONE>,
> +						     <28 IRQ_TYPE_NONE>,
> +						     <29 IRQ_TYPE_NONE>;

These are right though.

> +					reg = <0x50>;
> +					gpio-controller;
> +					#gpio-cells = <2>;
> +				};
> +
> +				rtc@11d {
> +					compatible = "qcom,pm8018-rtc", "qcom,pm8921-rtc";
> +					interrupt-parent = <&pmicintc>;
> +					interrupts = <39 IRQ_TYPE_NONE>;

IRQ_TYPE_EDGE_RISING?

> +					reg = <0x11d>;
> +					allow-set-time;
> +				};
> +
> +				pmicgpio: gpio@150 {
> +					compatible = "qcom,pm8018-gpio", "qcom,ssbi-gpio";
> +					interrupt-parent = <&pmicintc>;
> +					interrupts = <24 IRQ_TYPE_NONE>,
> +						     <25 IRQ_TYPE_NONE>,
> +						     <26 IRQ_TYPE_NONE>,
> +						     <27 IRQ_TYPE_NONE>,
> +						     <28 IRQ_TYPE_NONE>,
> +						     <29 IRQ_TYPE_NONE>;

These are right though.

> +					gpio-controller;
> +					#gpio-cells = <2>;
> +				};
> +			};
> +		};
> +
> +		rpm: rpm@108000 {
> +			compatible = "qcom,rpm-mdm9615";
> +			reg = <0x108000 0x1000>;
> +
> +			qcom,ipc = <&l2cc 0x8 2>;
> +
> +			interrupts = <0 19 0>, <0 21 0>, <0 22 0>;

IRQ_TYPE_EDGE_RISING and GIC_SPI?
Neil Armstrong Sept. 3, 2016, 12:48 p.m. UTC | #2
Le 26/08/2016 19:55, Stephen Boyd a écrit :
> On 08/23, Neil Armstrong wrote:
>> diff --git a/arch/arm/boot/dts/qcom-mdm9615.dtsi b/arch/arm/boot/dts/qcom-mdm9615.dtsi
>> new file mode 100644
>> index 0000000..e30bfbd
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/qcom-mdm9615.dtsi
>> +/ {
>> +	model = "Qualcomm MDM9615";
>> +	compatible = "qcom,mdm9615";
>> +	interrupt-parent = <&intc>;
>> +
>> +	cpus {
>> +		#address-cells = <1>;
>> +		#size-cells = <0>;
>> +
>> +		cpu0: cpu@0 {
>> +			compatible = "arm,cortex-a5";
>> +			device_type = "cpu";
>> +			next-level-cache = <&L2>;
>> +		};
>> +	};
>> +
>> +	cpu-pmu {
>> +		compatible = "arm,cortex-a5-pmu";
>> +		interrupts = <GIC_SPI 10 0x304>;
> 
> Should be 0x104? Or GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH?
Yes, and PPI also...

> 
>> +	};
>> +
>> +	clocks {
>> +		cxo_board {
>> +			compatible = "fixed-clock";
>> +			#clock-cells = <0>;
>> +			clock-frequency = <19200000>;
>> +		};
>> +	};
>> +
>> +	regulators {
> 
> This doesn't need to be a simple bus? so that the child devices
> probe? That's good if so.

It's correct, like the clocks node.

> 
>> +		vsdcc_fixed: vsdcc-regulator {
>> +			compatible = "regulator-fixed";
>> +			regulator-name = "SDCC Power";
>> +			regulator-min-microvolt = <2700000>;
>> +			regulator-max-microvolt = <2700000>;
>> +			regulator-always-on;
>> +		};
>> +	};
>> +
>> +	soc: soc {
> [...]
>> +		L2: l2-cache {
> 
> Missing unit address.
Done.

> 
>> +			compatible = "arm,pl310-cache";
>> +			reg = <0x02040000 0x1000>;
>> +			arm,data-latency = <2 2 0>;
>> +			cache-unified;
>> +			cache-level = <2>;
>> +		};
> [..]
>> +
>> +		qcom,ssbi@500000 {
>> +			compatible = "qcom,ssbi";
>> +			reg = <0x500000 0x1000>;
>> +			qcom,controller-type = "pmic-arbiter";
>> +
>> +			pmicintc: pmic@0 {
>> +				compatible = "qcom,pm8018", "qcom,pm8921";
>> +				interrupts = <GIC_PPI 226 IRQ_TYPE_LEVEL_HIGH>;
>> +				#interrupt-cells = <2>;
>> +				interrupt-controller;
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +
>> +				pwrkey@1c {
>> +					compatible = "qcom,pm8018-pwrkey", "qcom,pm8921-pwrkey";
>> +					reg = <0x1c>;
>> +					interrupt-parent = <&pmicintc>;
>> +					interrupts = <50 IRQ_TYPE_NONE>,
>> +						     <51 IRQ_TYPE_NONE>;
> 
> IRQ_TYPE_EDGE_RISING?
Crap, I'll revert these.

> 
>> +					debounce = <15625>;
>> +					pull-up;
>> +				};
>> +
>> +				pmicmpp: mpp@50 {
>> +					compatible = "qcom,pm8018-mpp", "qcom,ssbi-mpp";
>> +					interrupt-parent = <&pmicintc>;
>> +					interrupts = <24 IRQ_TYPE_NONE>,
>> +						     <25 IRQ_TYPE_NONE>,
>> +						     <26 IRQ_TYPE_NONE>,
>> +						     <27 IRQ_TYPE_NONE>,
>> +						     <28 IRQ_TYPE_NONE>,
>> +						     <29 IRQ_TYPE_NONE>;
> 
> These are right though.
> 
>> +					reg = <0x50>;
>> +					gpio-controller;
>> +					#gpio-cells = <2>;
>> +				};
>> +
>> +				rtc@11d {
>> +					compatible = "qcom,pm8018-rtc", "qcom,pm8921-rtc";
>> +					interrupt-parent = <&pmicintc>;
>> +					interrupts = <39 IRQ_TYPE_NONE>;
> 
> IRQ_TYPE_EDGE_RISING?
Crap, Crap, reverting...

> 
>> +					reg = <0x11d>;
>> +					allow-set-time;
>> +				};
>> +
>> +				pmicgpio: gpio@150 {
>> +					compatible = "qcom,pm8018-gpio", "qcom,ssbi-gpio";
>> +					interrupt-parent = <&pmicintc>;
>> +					interrupts = <24 IRQ_TYPE_NONE>,
>> +						     <25 IRQ_TYPE_NONE>,
>> +						     <26 IRQ_TYPE_NONE>,
>> +						     <27 IRQ_TYPE_NONE>,
>> +						     <28 IRQ_TYPE_NONE>,
>> +						     <29 IRQ_TYPE_NONE>;
> 
> These are right though.
> 
>> +					gpio-controller;
>> +					#gpio-cells = <2>;
>> +				};
>> +			};
>> +		};
>> +
>> +		rpm: rpm@108000 {
>> +			compatible = "qcom,rpm-mdm9615";
>> +			reg = <0x108000 0x1000>;
>> +
>> +			qcom,ipc = <&l2cc 0x8 2>;
>> +
>> +			interrupts = <0 19 0>, <0 21 0>, <0 22 0>;
> 
> IRQ_TYPE_EDGE_RISING and GIC_SPI?

Exact, will beautify these.

Thanks,
Neil
diff mbox

Patch

diff --git a/arch/arm/boot/dts/qcom-mdm9615.dtsi b/arch/arm/boot/dts/qcom-mdm9615.dtsi
new file mode 100644
index 0000000..e30bfbd
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-mdm9615.dtsi
@@ -0,0 +1,555 @@ 
+/*
+ * Device Tree Source for Qualcomm MDM9615 SoC
+ *
+ * Copyright (C) 2016 BayLibre, SAS.
+ * Author : Neil Armstrong <narmstrong@baylibre.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+/include/ "skeleton.dtsi"
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/qcom,gcc-mdm9615.h>
+#include <dt-bindings/reset/qcom,gcc-mdm9615.h>
+#include <dt-bindings/mfd/qcom-rpm.h>
+#include <dt-bindings/soc/qcom,gsbi.h>
+
+/ {
+	model = "Qualcomm MDM9615";
+	compatible = "qcom,mdm9615";
+	interrupt-parent = <&intc>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a5";
+			device_type = "cpu";
+			next-level-cache = <&L2>;
+		};
+	};
+
+	cpu-pmu {
+		compatible = "arm,cortex-a5-pmu";
+		interrupts = <GIC_SPI 10 0x304>;
+	};
+
+	clocks {
+		cxo_board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <19200000>;
+		};
+	};
+
+	regulators {
+		vsdcc_fixed: vsdcc-regulator {
+			compatible = "regulator-fixed";
+			regulator-name = "SDCC Power";
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2700000>;
+			regulator-always-on;
+		};
+	};
+
+	soc: soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		compatible = "simple-bus";
+
+		L2: l2-cache {
+			compatible = "arm,pl310-cache";
+			reg = <0x02040000 0x1000>;
+			arm,data-latency = <2 2 0>;
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		intc: interrupt-controller@2000000 {
+			compatible = "qcom,msm-qgic2";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			reg = <0x02000000 0x1000>,
+			      <0x02002000 0x1000>;
+		};
+
+		timer@200a000 {
+			compatible = "qcom,kpss-timer", "qcom,msm-timer";
+			interrupts = <GIC_PPI 1 0x101>,
+				     <GIC_PPI 2 0x101>,
+				     <GIC_PPI 3 0x101>;
+			reg = <0x0200a000 0x100>;
+			clock-frequency = <27000000>,
+					  <32768>;
+			cpu-offset = <0x80000>;
+		};
+
+		msmgpio: pinctrl@800000 {
+			compatible = "qcom,mdm9615-pinctrl";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <0x800000 0x4000>;
+		};
+
+		gcc: clock-controller@900000 {
+			compatible = "qcom,gcc-mdm9615";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			reg = <0x900000 0x4000>;
+		};
+
+		lcc: clock-controller@28000000 {
+			compatible = "qcom,lcc-mdm9615";
+			reg = <0x28000000 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		l2cc: clock-controller@2011000 {
+			compatible = "syscon";
+			reg = <0x02011000 0x1000>;
+		};
+
+		rng@1a500000 {
+			compatible = "qcom,prng";
+			reg = <0x1a500000 0x200>;
+			clocks = <&gcc PRNG_CLK>;
+			clock-names = "core";
+			assigned-clocks = <&gcc PRNG_CLK>;
+			assigned-clock-rates = <32000000>;
+		};
+
+		gsbi2: gsbi@16100000 {
+			compatible = "qcom,gsbi-v1.0.0";
+			cell-index = <2>;
+			reg = <0x16100000 0x100>;
+			clocks = <&gcc GSBI2_H_CLK>;
+			clock-names = "iface";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			gsbi2_i2c: i2c@16180000 {
+				compatible = "qcom,i2c-qup-v1.1.1";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x16180000 0x1000>;
+				interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GSBI2_QUP_CLK>, <&gcc GSBI2_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+			};
+		};
+
+		gsbi3: gsbi@16200000 {
+			compatible = "qcom,gsbi-v1.0.0";
+			cell-index = <3>;
+			reg = <0x16200000 0x100>;
+			clocks = <&gcc GSBI3_H_CLK>;
+			clock-names = "iface";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			gsbi3_spi: spi@16280000 {
+				compatible = "qcom,spi-qup-v1.1.1";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x16280000 0x1000>;
+				interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
+				spi-max-frequency = <24000000>;
+
+				clocks = <&gcc GSBI3_QUP_CLK>, <&gcc GSBI3_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+			};
+		};
+
+		gsbi4: gsbi@16300000 {
+			compatible = "qcom,gsbi-v1.0.0";
+			cell-index = <4>;
+			reg = <0x16300000 0x100>;
+			clocks = <&gcc GSBI4_H_CLK>;
+			clock-names = "iface";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			syscon-tcsr = <&tcsr>;
+
+			gsbi4_serial: serial@16340000 {
+				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+				reg = <0x16340000 0x1000>,
+				      <0x16300000 0x1000>;
+				interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GSBI4_UART_CLK>, <&gcc GSBI4_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+			};
+		};
+
+		gsbi5: gsbi@16400000 {
+			compatible = "qcom,gsbi-v1.0.0";
+			cell-index = <5>;
+			reg = <0x16400000 0x100>;
+			clocks = <&gcc GSBI5_H_CLK>;
+			clock-names = "iface";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			syscon-tcsr = <&tcsr>;
+
+			gsbi5_i2c: i2c@16480000 {
+				compatible = "qcom,i2c-qup-v1.1.1";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x16480000 0x1000>;
+				interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+
+				/* QUP clock is not initialized, set rate */
+				assigned-clocks = <&gcc GSBI5_QUP_CLK>;
+				assigned-clock-rates = <24000000>;
+
+				clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+			};
+
+			gsbi5_serial: serial@16440000 {
+				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+				reg = <0x16440000 0x1000>,
+				      <0x16400000 0x1000>;
+				interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+			};
+		};
+
+		qcom,ssbi@500000 {
+			compatible = "qcom,ssbi";
+			reg = <0x500000 0x1000>;
+			qcom,controller-type = "pmic-arbiter";
+
+			pmicintc: pmic@0 {
+				compatible = "qcom,pm8018", "qcom,pm8921";
+				interrupts = <GIC_PPI 226 IRQ_TYPE_LEVEL_HIGH>;
+				#interrupt-cells = <2>;
+				interrupt-controller;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				pwrkey@1c {
+					compatible = "qcom,pm8018-pwrkey", "qcom,pm8921-pwrkey";
+					reg = <0x1c>;
+					interrupt-parent = <&pmicintc>;
+					interrupts = <50 IRQ_TYPE_NONE>,
+						     <51 IRQ_TYPE_NONE>;
+					debounce = <15625>;
+					pull-up;
+				};
+
+				pmicmpp: mpp@50 {
+					compatible = "qcom,pm8018-mpp", "qcom,ssbi-mpp";
+					interrupt-parent = <&pmicintc>;
+					interrupts = <24 IRQ_TYPE_NONE>,
+						     <25 IRQ_TYPE_NONE>,
+						     <26 IRQ_TYPE_NONE>,
+						     <27 IRQ_TYPE_NONE>,
+						     <28 IRQ_TYPE_NONE>,
+						     <29 IRQ_TYPE_NONE>;
+					reg = <0x50>;
+					gpio-controller;
+					#gpio-cells = <2>;
+				};
+
+				rtc@11d {
+					compatible = "qcom,pm8018-rtc", "qcom,pm8921-rtc";
+					interrupt-parent = <&pmicintc>;
+					interrupts = <39 IRQ_TYPE_NONE>;
+					reg = <0x11d>;
+					allow-set-time;
+				};
+
+				pmicgpio: gpio@150 {
+					compatible = "qcom,pm8018-gpio", "qcom,ssbi-gpio";
+					interrupt-parent = <&pmicintc>;
+					interrupts = <24 IRQ_TYPE_NONE>,
+						     <25 IRQ_TYPE_NONE>,
+						     <26 IRQ_TYPE_NONE>,
+						     <27 IRQ_TYPE_NONE>,
+						     <28 IRQ_TYPE_NONE>,
+						     <29 IRQ_TYPE_NONE>;
+					gpio-controller;
+					#gpio-cells = <2>;
+				};
+			};
+		};
+
+		sdcc1bam: dma@12182000{
+			compatible = "qcom,bam-v1.3.0";
+			reg = <0x12182000 0x8000>;
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc SDC1_H_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+		};
+
+		sdcc2bam: dma@12142000{
+			compatible = "qcom,bam-v1.3.0";
+			reg = <0x12142000 0x8000>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc SDC2_H_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+		};
+
+		amba {
+			compatible = "arm,amba-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			sdcc1: sdcc@12180000 {
+				status = "disabled";
+				compatible = "arm,pl18x", "arm,primecell";
+				arm,primecell-periphid = <0x00051180>;
+				reg = <0x12180000 0x2000>;
+				interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names	= "cmd_irq";
+				clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
+				clock-names = "mclk", "apb_pclk";
+				bus-width = <8>;
+				max-frequency = <48000000>;
+				cap-sd-highspeed;
+				cap-mmc-highspeed;
+				vmmc-supply = <&vsdcc_fixed>;
+				dmas = <&sdcc1bam 2>, <&sdcc1bam 1>;
+				dma-names = "tx", "rx";
+				assigned-clocks = <&gcc SDC1_CLK>;
+				assigned-clock-rates = <400000>;
+			};
+
+			sdcc2: sdcc@12140000 {
+				compatible = "arm,pl18x", "arm,primecell";
+				arm,primecell-periphid = <0x00051180>;
+				status = "disabled";
+				reg = <0x12140000 0x2000>;
+				interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names	= "cmd_irq";
+				clocks = <&gcc SDC2_CLK>, <&gcc SDC2_H_CLK>;
+				clock-names = "mclk", "apb_pclk";
+				bus-width = <4>;
+				cap-sd-highspeed;
+				cap-mmc-highspeed;
+				max-frequency = <48000000>;
+				no-1-8-v;
+				vmmc-supply = <&vsdcc_fixed>;
+				dmas = <&sdcc2bam 2>, <&sdcc2bam 1>;
+				dma-names = "tx", "rx";
+				assigned-clocks = <&gcc SDC2_CLK>;
+				assigned-clock-rates = <400000>;
+			};
+		};
+
+		tcsr: syscon@1a400000 {
+			compatible = "qcom,tcsr-mdm9615", "syscon";
+			reg = <0x1a400000 0x100>;
+		};
+
+		rpm: rpm@108000 {
+			compatible = "qcom,rpm-mdm9615";
+			reg = <0x108000 0x1000>;
+
+			qcom,ipc = <&l2cc 0x8 2>;
+
+			interrupts = <0 19 0>, <0 21 0>, <0 22 0>;
+			interrupt-names	= "ack", "err", "wakeup";
+
+			regulators {
+				compatible = "qcom,rpm-pm8018-regulators";
+
+				vin_lvs1-supply = <&pm8018_s3>;
+
+				vdd_l7-supply = <&pm8018_s4>;
+				vdd_l8-supply = <&pm8018_s3>;
+				vdd_l9_l10_l11_l12-supply = <&pm8018_s5>;
+
+				/* Buck SMPS */
+				pm8018_s1: s1 {
+					regulator-min-microvolt = <500000>;
+					regulator-max-microvolt = <1150000>;
+					qcom,switch-mode-frequency = <1600000>;
+					bias-pull-down;
+				};
+
+				pm8018_s2: s2 {
+					regulator-min-microvolt = <1225000>;
+					regulator-max-microvolt = <1300000>;
+					qcom,switch-mode-frequency = <1600000>;
+					bias-pull-down;
+				};
+
+				pm8018_s3: s3 {
+					regulator-always-on;
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					qcom,switch-mode-frequency = <1600000>;
+					bias-pull-down;
+				};
+
+				pm8018_s4: s4 {
+					regulator-min-microvolt = <2100000>;
+					regulator-max-microvolt = <2200000>;
+					qcom,switch-mode-frequency = <1600000>;
+					bias-pull-down;
+				};
+
+				pm8018_s5: s5 {
+					regulator-always-on;
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
+					qcom,switch-mode-frequency = <1600000>;
+					bias-pull-down;
+				};
+
+				/* PMOS LDO */
+				pm8018_l2: l2 {
+					regulator-always-on;
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					bias-pull-down;
+				};
+
+				pm8018_l3: l3 {
+					regulator-always-on;
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					bias-pull-down;
+				};
+
+				pm8018_l4: l4 {
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					bias-pull-down;
+				};
+
+				pm8018_l5: l5 {
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+					bias-pull-down;
+				};
+
+				pm8018_l6: l6 {
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <2850000>;
+					bias-pull-down;
+				};
+
+				pm8018_l7: l7 {
+					regulator-min-microvolt = <1850000>;
+					regulator-max-microvolt = <1900000>;
+					bias-pull-down;
+				};
+
+				pm8018_l8: l8 {
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					bias-pull-down;
+				};
+
+				pm8018_l9: l9 {
+					regulator-min-microvolt = <750000>;
+					regulator-max-microvolt = <1150000>;
+					bias-pull-down;
+				};
+
+				pm8018_l10: l10 {
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+					bias-pull-down;
+				};
+
+				pm8018_l11: l11 {
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+					bias-pull-down;
+				};
+
+				pm8018_l12: l12 {
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+					bias-pull-down;
+				};
+
+				pm8018_l13: l13 {
+					regulator-min-microvolt = <1850000>;
+					regulator-max-microvolt = <2950000>;
+					bias-pull-down;
+				};
+
+				pm8018_l14: l14 {
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+					bias-pull-down;
+				};
+
+				/* Low Voltage Switch */
+				pm8018_lvs1: lvs1 {
+					bias-pull-down;
+				};
+			};
+		};
+	};
+};