diff mbox

[v9,3/4] doc: bindings: mfd: act8945a: Update the example

Message ID 1472722201-31872-4-git-send-email-wenyou.yang@atmel.com (mailing list archive)
State New, archived
Headers show

Commit Message

Wenyou Yang Sept. 1, 2016, 9:30 a.m. UTC
Since the act8945a-charger is regarded as a sub-device and it using
"interrupts" property, update the examples section.

Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
---

Changes in v9: None
Changes in v8: None
Changes in v7: None
Changes in v6: None
Changes in v4: None

 Documentation/devicetree/bindings/mfd/act8945a.txt | 22 +++++++++++++++-------
 1 file changed, 15 insertions(+), 7 deletions(-)

Comments

Lee Jones Sept. 1, 2016, 11:22 a.m. UTC | #1
On Thu, 01 Sep 2016, Wenyou Yang wrote:

> Since the act8945a-charger is regarded as a sub-device and it using
> "interrupts" property, update the examples section.
> 
> Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
> ---
> 
> Changes in v9: None
> Changes in v8: None
> Changes in v7: None
> Changes in v6: None
> Changes in v4: None
> 
>  Documentation/devicetree/bindings/mfd/act8945a.txt | 22 +++++++++++++++-------
>  1 file changed, 15 insertions(+), 7 deletions(-)

This is a functional change.  I'll require a DT Ack.

> diff --git a/Documentation/devicetree/bindings/mfd/act8945a.txt b/Documentation/devicetree/bindings/mfd/act8945a.txt
> index f712830..462819a 100644
> --- a/Documentation/devicetree/bindings/mfd/act8945a.txt
> +++ b/Documentation/devicetree/bindings/mfd/act8945a.txt
> @@ -14,13 +14,6 @@ Example:
>  		reg = <0x5b>;
>  		status = "okay";
>  
> -		pinctrl-names = "default";
> -		pinctrl-0 = <&pinctrl_charger_chglev>;
> -		active-semi,chglev-gpio = <&pioA 12 GPIO_ACTIVE_HIGH>;
> -		active-semi,input-voltage-threshold-microvolt = <6600>;
> -		active-semi,precondition-timeout = <40>;
> -		active-semi,total-timeout = <3>;
> -
>  		active-semi,vsel-high;
>  
>  		regulators {
> @@ -73,4 +66,19 @@ Example:
>  				regulator-always-on;
>  			};
>  		};
> +
> +		charger {
> +			compatible = "active-semi,act8945a-charger";
> +			pinctrl-names = "default";
> +			pinctrl-0 = <&pinctrl_charger_chglev &pinctrl_charger_lbo &pinctrl_charger_irq>;
> +			interrupt-parent = <&pioA>;
> +			interrupts = <45 GPIO_ACTIVE_LOW>;
> +
> +			active-semi,chglev-gpios = <&pioA 12 GPIO_ACTIVE_HIGH>;
> +			active-semi,lbo-gpios = <&pioA 72 GPIO_ACTIVE_LOW>;
> +			active-semi,input-voltage-threshold-microvolt = <6600>;
> +			active-semi,precondition-timeout = <40>;
> +			active-semi,total-timeout = <3>;
> +			status = "okay";
> +		};
>  	};
Sebastian Reichel Sept. 1, 2016, 12:47 p.m. UTC | #2
Hi Lee,

On Thu, Sep 01, 2016 at 12:22:51PM +0100, Lee Jones wrote:
> On Thu, 01 Sep 2016, Wenyou Yang wrote:
> 
> > Since the act8945a-charger is regarded as a sub-device and it using
> > "interrupts" property, update the examples section.
> > 
> > Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
> > ---
> > 
> > Changes in v9: None
> > Changes in v8: None
> > Changes in v7: None
> > Changes in v6: None
> > Changes in v4: None
> > 
> >  Documentation/devicetree/bindings/mfd/act8945a.txt | 22 +++++++++++++++-------
> >  1 file changed, 15 insertions(+), 7 deletions(-)
> 
> This is a functional change.  I'll require a DT Ack.

Wenyou Yang forgot to take over Rob's Acked-By from the previous
version: https://patchwork.kernel.org/patch/9298871/

-- Sebastian
Wenyou.Yang@microchip.com Sept. 1, 2016, 12:52 p.m. UTC | #3
> -----Original Message-----

> From: Sebastian Reichel [mailto:sre@kernel.org]

> Sent: 2016年9月1日 20:48

> To: Lee Jones <lee.jones@linaro.org>

> Cc: Wenyou Yang - A41535 <Wenyou.Yang@microchip.com>; Dmitry Eremin-

> Solenikov <dbaryshkov@gmail.com>; David Woodhouse

> <dwmw2@infradead.org>; Rob Herring <robh+dt@kernel.org>; Pawel Moll

> <pawel.moll@arm.com>; Mark Rutland <mark.rutland@arm.com>; Ian Campbell

> <ijc+devicetree@hellion.org.uk>; Kumar Gala <galak@codeaurora.org>; Nicolas

> Ferre <nicolas.ferre@atmel.com>; Alexandre Belloni <alexandre.belloni@free-

> electrons.com>; linux-kernel@vger.kernel.org; Wenyou Yang - A41535

> <Wenyou.Yang@microchip.com>; devicetree@vger.kernel.org; linux-arm-

> kernel@lists.infradead.org; linux-pm@vger.kernel.org

> Subject: Re: [PATCH v9 3/4] doc: bindings: mfd: act8945a: Update the example

> 

> Hi Lee,

> 

> On Thu, Sep 01, 2016 at 12:22:51PM +0100, Lee Jones wrote:

> > On Thu, 01 Sep 2016, Wenyou Yang wrote:

> >

> > > Since the act8945a-charger is regarded as a sub-device and it using

> > > "interrupts" property, update the examples section.

> > >

> > > Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>

> > > ---

> > >

> > > Changes in v9: None

> > > Changes in v8: None

> > > Changes in v7: None

> > > Changes in v6: None

> > > Changes in v4: None

> > >

> > >  Documentation/devicetree/bindings/mfd/act8945a.txt | 22

> > > +++++++++++++++-------

> > >  1 file changed, 15 insertions(+), 7 deletions(-)

> >

> > This is a functional change.  I'll require a DT Ack.

> 

> Wenyou Yang forgot to take over Rob's Acked-By from the previous

> version: https://patchwork.kernel.org/patch/9298871/


Yes, sorry. I forgot.


Best Regards,
Wenyou Yang
Lee Jones Sept. 1, 2016, 1:56 p.m. UTC | #4
On Thu, 01 Sep 2016, Wenyou.Yang@microchip.com wrote:

> 
> 
> > -----Original Message-----
> > From: Sebastian Reichel [mailto:sre@kernel.org]
> > Sent: 2016年9月1日 20:48
> > To: Lee Jones <lee.jones@linaro.org>
> > Cc: Wenyou Yang - A41535 <Wenyou.Yang@microchip.com>; Dmitry Eremin-
> > Solenikov <dbaryshkov@gmail.com>; David Woodhouse
> > <dwmw2@infradead.org>; Rob Herring <robh+dt@kernel.org>; Pawel Moll
> > <pawel.moll@arm.com>; Mark Rutland <mark.rutland@arm.com>; Ian Campbell
> > <ijc+devicetree@hellion.org.uk>; Kumar Gala <galak@codeaurora.org>; Nicolas
> > Ferre <nicolas.ferre@atmel.com>; Alexandre Belloni <alexandre.belloni@free-
> > electrons.com>; linux-kernel@vger.kernel.org; Wenyou Yang - A41535
> > <Wenyou.Yang@microchip.com>; devicetree@vger.kernel.org; linux-arm-
> > kernel@lists.infradead.org; linux-pm@vger.kernel.org
> > Subject: Re: [PATCH v9 3/4] doc: bindings: mfd: act8945a: Update the example
> > 
> > Hi Lee,
> > 
> > On Thu, Sep 01, 2016 at 12:22:51PM +0100, Lee Jones wrote:
> > > On Thu, 01 Sep 2016, Wenyou Yang wrote:
> > >
> > > > Since the act8945a-charger is regarded as a sub-device and it using
> > > > "interrupts" property, update the examples section.
> > > >
> > > > Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
> > > > ---
> > > >
> > > > Changes in v9: None
> > > > Changes in v8: None
> > > > Changes in v7: None
> > > > Changes in v6: None
> > > > Changes in v4: None
> > > >
> > > >  Documentation/devicetree/bindings/mfd/act8945a.txt | 22
> > > > +++++++++++++++-------
> > > >  1 file changed, 15 insertions(+), 7 deletions(-)
> > >
> > > This is a functional change.  I'll require a DT Ack.
> > 
> > Wenyou Yang forgot to take over Rob's Acked-By from the previous
> > version: https://patchwork.kernel.org/patch/9298871/
> 
> Yes, sorry. I forgot.

Very well.

Applied, thanks.
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/mfd/act8945a.txt b/Documentation/devicetree/bindings/mfd/act8945a.txt
index f712830..462819a 100644
--- a/Documentation/devicetree/bindings/mfd/act8945a.txt
+++ b/Documentation/devicetree/bindings/mfd/act8945a.txt
@@ -14,13 +14,6 @@  Example:
 		reg = <0x5b>;
 		status = "okay";
 
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_charger_chglev>;
-		active-semi,chglev-gpio = <&pioA 12 GPIO_ACTIVE_HIGH>;
-		active-semi,input-voltage-threshold-microvolt = <6600>;
-		active-semi,precondition-timeout = <40>;
-		active-semi,total-timeout = <3>;
-
 		active-semi,vsel-high;
 
 		regulators {
@@ -73,4 +66,19 @@  Example:
 				regulator-always-on;
 			};
 		};
+
+		charger {
+			compatible = "active-semi,act8945a-charger";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_charger_chglev &pinctrl_charger_lbo &pinctrl_charger_irq>;
+			interrupt-parent = <&pioA>;
+			interrupts = <45 GPIO_ACTIVE_LOW>;
+
+			active-semi,chglev-gpios = <&pioA 12 GPIO_ACTIVE_HIGH>;
+			active-semi,lbo-gpios = <&pioA 72 GPIO_ACTIVE_LOW>;
+			active-semi,input-voltage-threshold-microvolt = <6600>;
+			active-semi,precondition-timeout = <40>;
+			active-semi,total-timeout = <3>;
+			status = "okay";
+		};
 	};