diff mbox

[v3,13/17] ARM: dts: exynos: Fix mismatched values of SD drive strengh configuration on exynos4415

Message ID 1472987060-28293-14-git-send-email-krzk@kernel.org (mailing list archive)
State New, archived
Headers show

Commit Message

Krzysztof Kozlowski Sept. 4, 2016, 11:04 a.m. UTC 
From: Krzysztof Kozlowski <k.kozlowski@samsung.com>

The pinctrl drive strength register on exynos4415 is 2-bit wide for each
pin.  The pins for SD2 were configured with value of 4.  The driver does
not validate the value so this overflow effectively set a bit 1 in
adjacent pins thus configuring them to drive strength 2x.

The author's intention was probably to set drive strength of 4x.
All other SD pins are configured with drive strength of 4x.  Fix these
with same pattern.

Fixes: 9246e7ff24c5 ("ARM: dts: Add dts files for exynos4415 SoC")
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
---
 arch/arm/boot/dts/exynos4415-pinctrl.dtsi | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
diff mbox

Patch

diff --git a/arch/arm/boot/dts/exynos4415-pinctrl.dtsi b/arch/arm/boot/dts/exynos4415-pinctrl.dtsi
index f54aee53b6ec..76cfd872ead3 100644
--- a/arch/arm/boot/dts/exynos4415-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos4415-pinctrl.dtsi
@@ -480,14 +480,14 @@ 
 		samsung,pins = "gpk2-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <4>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd2_cmd: sd2-cmd {
 		samsung,pins = "gpk2-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <4>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd2_cd: sd2-cd {
@@ -501,14 +501,14 @@ 
 		samsung,pins = "gpk2-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <4>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd2_bus4: sd2-bus-width4 {
 		samsung,pins = "gpk2-4", "gpk2-5", "gpk2-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <4>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	cam_port_b_io: cam-port-b-io {