diff mbox

[UPDATE,V10,1/8] ACPI: I/O Remapping Table (IORT) initial support

Message ID 1473249412-20226-1-git-send-email-tn@semihalf.com (mailing list archive)
State New, archived
Headers show

Commit Message

Tomasz Nowicki Sept. 7, 2016, 11:56 a.m. UTC
IORT shows representation of IO topology for ARM based systems.
It describes how various components are connected together on
parent-child basis e.g. PCI RC -> SMMU -> ITS. Also see IORT spec.
http://infocenter.arm.com/help/topic/com.arm.doc.den0049b/DEN0049B_IO_Remapping_Table.pdf

Initial support allows to detect IORT table presence and save its
root pointer obtained through acpi_get_table(). The pointer validity
depends on acpi_gbl_permanent_mmap because if acpi_gbl_permanent_mmap
is not set while using IORT nodes we would dereference unmapped pointers.

For the aforementioned reason call iort_table_detect() from acpi_init()
which guarantees acpi_gbl_permanent_mmap to be set at that point.

Add generic helpers which are helpful for scanning and retrieving
information from IORT table content. List of the most important helpers:
- iort_find_dev_node() finds IORT node for a given device
- iort_node_map_rid() maps device RID and returns IORT node which provides
  final translation

IORT support is placed under drivers/acpi/arm64/ new directory due to its
ARM64 specific nature. The code there is considered only for ARM64.
The long term plan is to keep all ARM64 specific tables support
in this place e.g. GTDT table.

Signed-off-by: Tomasz Nowicki <tn@semihalf.com>
Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org>
Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
---
 drivers/acpi/Kconfig        |   4 +
 drivers/acpi/Makefile       |   2 +
 drivers/acpi/arm64/Kconfig  |   6 ++
 drivers/acpi/arm64/Makefile |   1 +
 drivers/acpi/arm64/iort.c   | 213 ++++++++++++++++++++++++++++++++++++++++++++
 drivers/acpi/bus.c          |   2 +
 include/linux/acpi_iort.h   |  30 +++++++
 7 files changed, 258 insertions(+)
 create mode 100644 drivers/acpi/arm64/Kconfig
 create mode 100644 drivers/acpi/arm64/Makefile
 create mode 100644 drivers/acpi/arm64/iort.c
 create mode 100644 include/linux/acpi_iort.h

Comments

Lorenzo Pieralisi Sept. 8, 2016, 1:59 p.m. UTC | #1
On Wed, Sep 07, 2016 at 01:56:52PM +0200, Tomasz Nowicki wrote:
> IORT shows representation of IO topology for ARM based systems.
> It describes how various components are connected together on
> parent-child basis e.g. PCI RC -> SMMU -> ITS. Also see IORT spec.
> http://infocenter.arm.com/help/topic/com.arm.doc.den0049b/DEN0049B_IO_Remapping_Table.pdf
> 
> Initial support allows to detect IORT table presence and save its
> root pointer obtained through acpi_get_table(). The pointer validity
> depends on acpi_gbl_permanent_mmap because if acpi_gbl_permanent_mmap
> is not set while using IORT nodes we would dereference unmapped pointers.
> 
> For the aforementioned reason call iort_table_detect() from acpi_init()
                                     ^^^^
Stale function name that got lost in the function renaming.

Anyway, where are we with these two patches ? Is there anything left
we should change ? The rest of this series (and not only that)
depends on these two patches (that need an ACK) so if there is
anything left to change we change it otherwise can we queue them please ?

Thanks,
Lorenzo

> which guarantees acpi_gbl_permanent_mmap to be set at that point.
> 
> Add generic helpers which are helpful for scanning and retrieving
> information from IORT table content. List of the most important helpers:
> - iort_find_dev_node() finds IORT node for a given device
> - iort_node_map_rid() maps device RID and returns IORT node which provides
>   final translation
> 
> IORT support is placed under drivers/acpi/arm64/ new directory due to its
> ARM64 specific nature. The code there is considered only for ARM64.
> The long term plan is to keep all ARM64 specific tables support
> in this place e.g. GTDT table.
> 
> Signed-off-by: Tomasz Nowicki <tn@semihalf.com>
> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org>
> Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
> ---
>  drivers/acpi/Kconfig        |   4 +
>  drivers/acpi/Makefile       |   2 +
>  drivers/acpi/arm64/Kconfig  |   6 ++
>  drivers/acpi/arm64/Makefile |   1 +
>  drivers/acpi/arm64/iort.c   | 213 ++++++++++++++++++++++++++++++++++++++++++++
>  drivers/acpi/bus.c          |   2 +
>  include/linux/acpi_iort.h   |  30 +++++++
>  7 files changed, 258 insertions(+)
>  create mode 100644 drivers/acpi/arm64/Kconfig
>  create mode 100644 drivers/acpi/arm64/Makefile
>  create mode 100644 drivers/acpi/arm64/iort.c
>  create mode 100644 include/linux/acpi_iort.h
> 
> diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
> index 445ce28..d5c0614 100644
> --- a/drivers/acpi/Kconfig
> +++ b/drivers/acpi/Kconfig
> @@ -521,4 +521,8 @@ config ACPI_CONFIGFS
>  	  userspace. The configurable ACPI groups will be visible under
>  	  /config/acpi, assuming configfs is mounted under /config.
>  
> +if ARM64
> +source "drivers/acpi/arm64/Kconfig"
> +endif
> +
>  endif	# ACPI
> diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile
> index 5ae9d85..e5ada78 100644
> --- a/drivers/acpi/Makefile
> +++ b/drivers/acpi/Makefile
> @@ -105,3 +105,5 @@ obj-$(CONFIG_ACPI_CONFIGFS)	+= acpi_configfs.o
>  
>  video-objs			+= acpi_video.o video_detect.o
>  obj-y				+= dptf/
> +
> +obj-$(CONFIG_ARM64)		+= arm64/
> diff --git a/drivers/acpi/arm64/Kconfig b/drivers/acpi/arm64/Kconfig
> new file mode 100644
> index 0000000..4616da4
> --- /dev/null
> +++ b/drivers/acpi/arm64/Kconfig
> @@ -0,0 +1,6 @@
> +#
> +# ACPI Configuration for ARM64
> +#
> +
> +config ACPI_IORT
> +	bool
> diff --git a/drivers/acpi/arm64/Makefile b/drivers/acpi/arm64/Makefile
> new file mode 100644
> index 0000000..72331f2
> --- /dev/null
> +++ b/drivers/acpi/arm64/Makefile
> @@ -0,0 +1 @@
> +obj-$(CONFIG_ACPI_IORT) 	+= iort.o
> diff --git a/drivers/acpi/arm64/iort.c b/drivers/acpi/arm64/iort.c
> new file mode 100644
> index 0000000..e28e256
> --- /dev/null
> +++ b/drivers/acpi/arm64/iort.c
> @@ -0,0 +1,213 @@
> +/*
> + * Copyright (C) 2016, Semihalf
> + *	Author: Tomasz Nowicki <tn@semihalf.com>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms and conditions of the GNU General Public License,
> + * version 2, as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
> + * more details.
> + *
> + * This file implements early detection/parsing of I/O mapping
> + * reported to OS through firmware via I/O Remapping Table (IORT)
> + * IORT document number: ARM DEN 0049A
> + */
> +
> +#define pr_fmt(fmt)	"ACPI: IORT: " fmt
> +
> +#include <linux/acpi_iort.h>
> +#include <linux/kernel.h>
> +#include <linux/pci.h>
> +
> +typedef acpi_status (*iort_find_node_callback)
> +	(struct acpi_iort_node *node, void *context);
> +
> +/* Root pointer to the mapped IORT table */
> +static struct acpi_table_header *iort_table;
> +
> +static LIST_HEAD(iort_msi_chip_list);
> +static DEFINE_SPINLOCK(iort_msi_chip_lock);
> +
> +static struct acpi_iort_node *iort_scan_node(enum acpi_iort_node_type type,
> +					     iort_find_node_callback callback,
> +					     void *context)
> +{
> +	struct acpi_iort_node *iort_node, *iort_end;
> +	struct acpi_table_iort *iort;
> +	int i;
> +
> +	if (!iort_table)
> +		return NULL;
> +
> +	/* Get the first IORT node */
> +	iort = (struct acpi_table_iort *)iort_table;
> +	iort_node = ACPI_ADD_PTR(struct acpi_iort_node, iort,
> +				 iort->node_offset);
> +	iort_end = ACPI_ADD_PTR(struct acpi_iort_node, iort_table,
> +				iort_table->length);
> +
> +	for (i = 0; i < iort->node_count; i++) {
> +		if (WARN_TAINT(iort_node >= iort_end, TAINT_FIRMWARE_WORKAROUND,
> +			       "IORT node pointer overflows, bad table!\n"))
> +			return NULL;
> +
> +		if (iort_node->type == type &&
> +		    ACPI_SUCCESS(callback(iort_node, context)))
> +				return iort_node;
> +
> +		iort_node = ACPI_ADD_PTR(struct acpi_iort_node, iort_node,
> +					 iort_node->length);
> +	}
> +
> +	return NULL;
> +}
> +
> +static acpi_status iort_match_node_callback(struct acpi_iort_node *node,
> +					    void *context)
> +{
> +	struct device *dev = context;
> +	acpi_status status = AE_NOT_FOUND;
> +
> +	if (node->type == ACPI_IORT_NODE_NAMED_COMPONENT) {
> +		struct acpi_buffer buf = { ACPI_ALLOCATE_BUFFER, NULL };
> +		struct acpi_device *adev = to_acpi_device_node(dev->fwnode);
> +		struct acpi_iort_named_component *ncomp;
> +
> +		if (!adev)
> +			goto out;
> +
> +		status = acpi_get_name(adev->handle, ACPI_FULL_PATHNAME, &buf);
> +		if (ACPI_FAILURE(status)) {
> +			dev_warn(dev, "Can't get device full path name\n");
> +			goto out;
> +		}
> +
> +		ncomp = (struct acpi_iort_named_component *)node->node_data;
> +		if (!strcmp(ncomp->device_name, buf.pointer))
> +			status = AE_OK;
> +
> +		acpi_os_free(buf.pointer);
> +	} else if (node->type == ACPI_IORT_NODE_PCI_ROOT_COMPLEX) {
> +		struct acpi_iort_root_complex *pci_rc;
> +		struct pci_bus *bus;
> +
> +		bus = to_pci_bus(dev);
> +		pci_rc = (struct acpi_iort_root_complex *)node->node_data;
> +
> +		/*
> +		 * It is assumed that PCI segment numbers maps one-to-one
> +		 * with root complexes. Each segment number can represent only
> +		 * one root complex.
> +		 */
> +		if (pci_rc->pci_segment_number == pci_domain_nr(bus))
> +			status = AE_OK;
> +	}
> +out:
> +	return status;
> +}
> +
> +static int iort_id_map(struct acpi_iort_id_mapping *map, u8 type, u32 rid_in,
> +		       u32 *rid_out)
> +{
> +	/* Single mapping does not care for input id */
> +	if (map->flags & ACPI_IORT_ID_SINGLE_MAPPING) {
> +		if (type == ACPI_IORT_NODE_NAMED_COMPONENT ||
> +		    type == ACPI_IORT_NODE_PCI_ROOT_COMPLEX) {
> +			*rid_out = map->output_base;
> +			return 0;
> +		}
> +
> +		pr_warn(FW_BUG "[map %p] SINGLE MAPPING flag not allowed for node type %d, skipping ID map\n",
> +			map, type);
> +		return -ENXIO;
> +	}
> +
> +	if (rid_in < map->input_base ||
> +	    (rid_in >= map->input_base + map->id_count))
> +		return -ENXIO;
> +
> +	*rid_out = map->output_base + (rid_in - map->input_base);
> +	return 0;
> +}
> +
> +static struct acpi_iort_node *iort_node_map_rid(struct acpi_iort_node *node,
> +						u32 rid_in, u32 *rid_out,
> +						u8 type)
> +{
> +	u32 rid = rid_in;
> +
> +	/* Parse the ID mapping tree to find specified node type */
> +	while (node) {
> +		struct acpi_iort_id_mapping *map;
> +		int i;
> +
> +		if (node->type == type) {
> +			if (rid_out)
> +				*rid_out = rid;
> +			return node;
> +		}
> +
> +		if (!node->mapping_offset || !node->mapping_count)
> +			goto fail_map;
> +
> +		map = ACPI_ADD_PTR(struct acpi_iort_id_mapping, node,
> +				   node->mapping_offset);
> +
> +		/* Firmware bug! */
> +		if (!map->output_reference) {
> +			pr_err(FW_BUG "[node %p type %d] ID map has NULL parent reference\n",
> +			       node, node->type);
> +			goto fail_map;
> +		}
> +
> +		/* Do the RID translation */
> +		for (i = 0; i < node->mapping_count; i++, map++) {
> +			if (!iort_id_map(map, node->type, rid, &rid))
> +				break;
> +		}
> +
> +		if (i == node->mapping_count)
> +			goto fail_map;
> +
> +		node = ACPI_ADD_PTR(struct acpi_iort_node, iort_table,
> +				    map->output_reference);
> +	}
> +
> +fail_map:
> +	/* Map input RID to output RID unchanged on mapping failure*/
> +	if (rid_out)
> +		*rid_out = rid_in;
> +
> +	return NULL;
> +}
> +
> +static struct acpi_iort_node *iort_find_dev_node(struct device *dev)
> +{
> +	struct pci_bus *pbus;
> +
> +	if (!dev_is_pci(dev))
> +		return iort_scan_node(ACPI_IORT_NODE_NAMED_COMPONENT,
> +				      iort_match_node_callback, dev);
> +
> +	/* Find a PCI root bus */
> +	pbus = to_pci_dev(dev)->bus;
> +	while (!pci_is_root_bus(pbus))
> +		pbus = pbus->parent;
> +
> +	return iort_scan_node(ACPI_IORT_NODE_PCI_ROOT_COMPLEX,
> +			      iort_match_node_callback, &pbus->dev);
> +}
> +
> +void __init acpi_iort_init(void)
> +{
> +	acpi_status status;
> +
> +	status = acpi_get_table(ACPI_SIG_IORT, 0, &iort_table);
> +	if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
> +		const char *msg = acpi_format_exception(status);
> +		pr_err("Failed to get table, %s\n", msg);
> +	}
> +}
> diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c
> index 85b7d07..e56e643 100644
> --- a/drivers/acpi/bus.c
> +++ b/drivers/acpi/bus.c
> @@ -36,6 +36,7 @@
>  #ifdef CONFIG_X86
>  #include <asm/mpspec.h>
>  #endif
> +#include <linux/acpi_iort.h>
>  #include <linux/pci.h>
>  #include <acpi/apei.h>
>  #include <linux/dmi.h>
> @@ -1186,6 +1187,7 @@ static int __init acpi_init(void)
>  	}
>  
>  	pci_mmcfg_late_init();
> +	acpi_iort_init();
>  	acpi_scan_init();
>  	acpi_ec_init();
>  	acpi_debugfs_init();
> diff --git a/include/linux/acpi_iort.h b/include/linux/acpi_iort.h
> new file mode 100644
> index 0000000..fcacaf7
> --- /dev/null
> +++ b/include/linux/acpi_iort.h
> @@ -0,0 +1,30 @@
> +/*
> + * Copyright (C) 2016, Semihalf
> + *	Author: Tomasz Nowicki <tn@semihalf.com>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms and conditions of the GNU General Public License,
> + * version 2, as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
> + * more details.
> + *
> + * You should have received a copy of the GNU General Public License along with
> + * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
> + * Place - Suite 330, Boston, MA 02111-1307 USA.
> + */
> +
> +#ifndef __ACPI_IORT_H__
> +#define __ACPI_IORT_H__
> +
> +#include <linux/acpi.h>
> +
> +#ifdef CONFIG_ACPI_IORT
> +void acpi_iort_init(void);
> +#else
> +static inline void acpi_iort_init(void) { }
> +#endif
> +
> +#endif /* __ACPI_IORT_H__ */
> -- 
> 1.9.1
>
Lorenzo Pieralisi Sept. 9, 2016, 9:20 a.m. UTC | #2
Hi Rafael,

On Wed, Sep 07, 2016 at 01:56:52PM +0200, Tomasz Nowicki wrote:
> IORT shows representation of IO topology for ARM based systems.
> It describes how various components are connected together on
> parent-child basis e.g. PCI RC -> SMMU -> ITS. Also see IORT spec.
> http://infocenter.arm.com/help/topic/com.arm.doc.den0049b/DEN0049B_IO_Remapping_Table.pdf
> 
> Initial support allows to detect IORT table presence and save its
> root pointer obtained through acpi_get_table(). The pointer validity
> depends on acpi_gbl_permanent_mmap because if acpi_gbl_permanent_mmap
> is not set while using IORT nodes we would dereference unmapped pointers.
> 
> For the aforementioned reason call iort_table_detect() from acpi_init()
> which guarantees acpi_gbl_permanent_mmap to be set at that point.
> 
> Add generic helpers which are helpful for scanning and retrieving
> information from IORT table content. List of the most important helpers:
> - iort_find_dev_node() finds IORT node for a given device
> - iort_node_map_rid() maps device RID and returns IORT node which provides
>   final translation
> 
> IORT support is placed under drivers/acpi/arm64/ new directory due to its
> ARM64 specific nature. The code there is considered only for ARM64.
> The long term plan is to keep all ARM64 specific tables support
> in this place e.g. GTDT table.
> 
> Signed-off-by: Tomasz Nowicki <tn@semihalf.com>
> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org>
> Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
> ---

Apart from the minor commit logs oversights we consider these two
patches ready to go, please let us know if there is something you want
changed since we are at risk of missing yet another merge window.

It is ARM64 specific code, we created and moved the code to its
ARM64 specific directory and we are happy to maintain it as such,
we need your ACK to get this done so if there is something you
want changed please let us know otherwise I would ask your ACK
on these two patches to give Marc a go-ahead for -next and
hopefully 4.9.

Thanks !
Lorenzo

>  drivers/acpi/Kconfig        |   4 +
>  drivers/acpi/Makefile       |   2 +
>  drivers/acpi/arm64/Kconfig  |   6 ++
>  drivers/acpi/arm64/Makefile |   1 +
>  drivers/acpi/arm64/iort.c   | 213 ++++++++++++++++++++++++++++++++++++++++++++
>  drivers/acpi/bus.c          |   2 +
>  include/linux/acpi_iort.h   |  30 +++++++
>  7 files changed, 258 insertions(+)
>  create mode 100644 drivers/acpi/arm64/Kconfig
>  create mode 100644 drivers/acpi/arm64/Makefile
>  create mode 100644 drivers/acpi/arm64/iort.c
>  create mode 100644 include/linux/acpi_iort.h
> 
> diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
> index 445ce28..d5c0614 100644
> --- a/drivers/acpi/Kconfig
> +++ b/drivers/acpi/Kconfig
> @@ -521,4 +521,8 @@ config ACPI_CONFIGFS
>  	  userspace. The configurable ACPI groups will be visible under
>  	  /config/acpi, assuming configfs is mounted under /config.
>  
> +if ARM64
> +source "drivers/acpi/arm64/Kconfig"
> +endif
> +
>  endif	# ACPI
> diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile
> index 5ae9d85..e5ada78 100644
> --- a/drivers/acpi/Makefile
> +++ b/drivers/acpi/Makefile
> @@ -105,3 +105,5 @@ obj-$(CONFIG_ACPI_CONFIGFS)	+= acpi_configfs.o
>  
>  video-objs			+= acpi_video.o video_detect.o
>  obj-y				+= dptf/
> +
> +obj-$(CONFIG_ARM64)		+= arm64/
> diff --git a/drivers/acpi/arm64/Kconfig b/drivers/acpi/arm64/Kconfig
> new file mode 100644
> index 0000000..4616da4
> --- /dev/null
> +++ b/drivers/acpi/arm64/Kconfig
> @@ -0,0 +1,6 @@
> +#
> +# ACPI Configuration for ARM64
> +#
> +
> +config ACPI_IORT
> +	bool
> diff --git a/drivers/acpi/arm64/Makefile b/drivers/acpi/arm64/Makefile
> new file mode 100644
> index 0000000..72331f2
> --- /dev/null
> +++ b/drivers/acpi/arm64/Makefile
> @@ -0,0 +1 @@
> +obj-$(CONFIG_ACPI_IORT) 	+= iort.o
> diff --git a/drivers/acpi/arm64/iort.c b/drivers/acpi/arm64/iort.c
> new file mode 100644
> index 0000000..e28e256
> --- /dev/null
> +++ b/drivers/acpi/arm64/iort.c
> @@ -0,0 +1,213 @@
> +/*
> + * Copyright (C) 2016, Semihalf
> + *	Author: Tomasz Nowicki <tn@semihalf.com>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms and conditions of the GNU General Public License,
> + * version 2, as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
> + * more details.
> + *
> + * This file implements early detection/parsing of I/O mapping
> + * reported to OS through firmware via I/O Remapping Table (IORT)
> + * IORT document number: ARM DEN 0049A
> + */
> +
> +#define pr_fmt(fmt)	"ACPI: IORT: " fmt
> +
> +#include <linux/acpi_iort.h>
> +#include <linux/kernel.h>
> +#include <linux/pci.h>
> +
> +typedef acpi_status (*iort_find_node_callback)
> +	(struct acpi_iort_node *node, void *context);
> +
> +/* Root pointer to the mapped IORT table */
> +static struct acpi_table_header *iort_table;
> +
> +static LIST_HEAD(iort_msi_chip_list);
> +static DEFINE_SPINLOCK(iort_msi_chip_lock);
> +
> +static struct acpi_iort_node *iort_scan_node(enum acpi_iort_node_type type,
> +					     iort_find_node_callback callback,
> +					     void *context)
> +{
> +	struct acpi_iort_node *iort_node, *iort_end;
> +	struct acpi_table_iort *iort;
> +	int i;
> +
> +	if (!iort_table)
> +		return NULL;
> +
> +	/* Get the first IORT node */
> +	iort = (struct acpi_table_iort *)iort_table;
> +	iort_node = ACPI_ADD_PTR(struct acpi_iort_node, iort,
> +				 iort->node_offset);
> +	iort_end = ACPI_ADD_PTR(struct acpi_iort_node, iort_table,
> +				iort_table->length);
> +
> +	for (i = 0; i < iort->node_count; i++) {
> +		if (WARN_TAINT(iort_node >= iort_end, TAINT_FIRMWARE_WORKAROUND,
> +			       "IORT node pointer overflows, bad table!\n"))
> +			return NULL;
> +
> +		if (iort_node->type == type &&
> +		    ACPI_SUCCESS(callback(iort_node, context)))
> +				return iort_node;
> +
> +		iort_node = ACPI_ADD_PTR(struct acpi_iort_node, iort_node,
> +					 iort_node->length);
> +	}
> +
> +	return NULL;
> +}
> +
> +static acpi_status iort_match_node_callback(struct acpi_iort_node *node,
> +					    void *context)
> +{
> +	struct device *dev = context;
> +	acpi_status status = AE_NOT_FOUND;
> +
> +	if (node->type == ACPI_IORT_NODE_NAMED_COMPONENT) {
> +		struct acpi_buffer buf = { ACPI_ALLOCATE_BUFFER, NULL };
> +		struct acpi_device *adev = to_acpi_device_node(dev->fwnode);
> +		struct acpi_iort_named_component *ncomp;
> +
> +		if (!adev)
> +			goto out;
> +
> +		status = acpi_get_name(adev->handle, ACPI_FULL_PATHNAME, &buf);
> +		if (ACPI_FAILURE(status)) {
> +			dev_warn(dev, "Can't get device full path name\n");
> +			goto out;
> +		}
> +
> +		ncomp = (struct acpi_iort_named_component *)node->node_data;
> +		if (!strcmp(ncomp->device_name, buf.pointer))
> +			status = AE_OK;
> +
> +		acpi_os_free(buf.pointer);
> +	} else if (node->type == ACPI_IORT_NODE_PCI_ROOT_COMPLEX) {
> +		struct acpi_iort_root_complex *pci_rc;
> +		struct pci_bus *bus;
> +
> +		bus = to_pci_bus(dev);
> +		pci_rc = (struct acpi_iort_root_complex *)node->node_data;
> +
> +		/*
> +		 * It is assumed that PCI segment numbers maps one-to-one
> +		 * with root complexes. Each segment number can represent only
> +		 * one root complex.
> +		 */
> +		if (pci_rc->pci_segment_number == pci_domain_nr(bus))
> +			status = AE_OK;
> +	}
> +out:
> +	return status;
> +}
> +
> +static int iort_id_map(struct acpi_iort_id_mapping *map, u8 type, u32 rid_in,
> +		       u32 *rid_out)
> +{
> +	/* Single mapping does not care for input id */
> +	if (map->flags & ACPI_IORT_ID_SINGLE_MAPPING) {
> +		if (type == ACPI_IORT_NODE_NAMED_COMPONENT ||
> +		    type == ACPI_IORT_NODE_PCI_ROOT_COMPLEX) {
> +			*rid_out = map->output_base;
> +			return 0;
> +		}
> +
> +		pr_warn(FW_BUG "[map %p] SINGLE MAPPING flag not allowed for node type %d, skipping ID map\n",
> +			map, type);
> +		return -ENXIO;
> +	}
> +
> +	if (rid_in < map->input_base ||
> +	    (rid_in >= map->input_base + map->id_count))
> +		return -ENXIO;
> +
> +	*rid_out = map->output_base + (rid_in - map->input_base);
> +	return 0;
> +}
> +
> +static struct acpi_iort_node *iort_node_map_rid(struct acpi_iort_node *node,
> +						u32 rid_in, u32 *rid_out,
> +						u8 type)
> +{
> +	u32 rid = rid_in;
> +
> +	/* Parse the ID mapping tree to find specified node type */
> +	while (node) {
> +		struct acpi_iort_id_mapping *map;
> +		int i;
> +
> +		if (node->type == type) {
> +			if (rid_out)
> +				*rid_out = rid;
> +			return node;
> +		}
> +
> +		if (!node->mapping_offset || !node->mapping_count)
> +			goto fail_map;
> +
> +		map = ACPI_ADD_PTR(struct acpi_iort_id_mapping, node,
> +				   node->mapping_offset);
> +
> +		/* Firmware bug! */
> +		if (!map->output_reference) {
> +			pr_err(FW_BUG "[node %p type %d] ID map has NULL parent reference\n",
> +			       node, node->type);
> +			goto fail_map;
> +		}
> +
> +		/* Do the RID translation */
> +		for (i = 0; i < node->mapping_count; i++, map++) {
> +			if (!iort_id_map(map, node->type, rid, &rid))
> +				break;
> +		}
> +
> +		if (i == node->mapping_count)
> +			goto fail_map;
> +
> +		node = ACPI_ADD_PTR(struct acpi_iort_node, iort_table,
> +				    map->output_reference);
> +	}
> +
> +fail_map:
> +	/* Map input RID to output RID unchanged on mapping failure*/
> +	if (rid_out)
> +		*rid_out = rid_in;
> +
> +	return NULL;
> +}
> +
> +static struct acpi_iort_node *iort_find_dev_node(struct device *dev)
> +{
> +	struct pci_bus *pbus;
> +
> +	if (!dev_is_pci(dev))
> +		return iort_scan_node(ACPI_IORT_NODE_NAMED_COMPONENT,
> +				      iort_match_node_callback, dev);
> +
> +	/* Find a PCI root bus */
> +	pbus = to_pci_dev(dev)->bus;
> +	while (!pci_is_root_bus(pbus))
> +		pbus = pbus->parent;
> +
> +	return iort_scan_node(ACPI_IORT_NODE_PCI_ROOT_COMPLEX,
> +			      iort_match_node_callback, &pbus->dev);
> +}
> +
> +void __init acpi_iort_init(void)
> +{
> +	acpi_status status;
> +
> +	status = acpi_get_table(ACPI_SIG_IORT, 0, &iort_table);
> +	if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
> +		const char *msg = acpi_format_exception(status);
> +		pr_err("Failed to get table, %s\n", msg);
> +	}
> +}
> diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c
> index 85b7d07..e56e643 100644
> --- a/drivers/acpi/bus.c
> +++ b/drivers/acpi/bus.c
> @@ -36,6 +36,7 @@
>  #ifdef CONFIG_X86
>  #include <asm/mpspec.h>
>  #endif
> +#include <linux/acpi_iort.h>
>  #include <linux/pci.h>
>  #include <acpi/apei.h>
>  #include <linux/dmi.h>
> @@ -1186,6 +1187,7 @@ static int __init acpi_init(void)
>  	}
>  
>  	pci_mmcfg_late_init();
> +	acpi_iort_init();
>  	acpi_scan_init();
>  	acpi_ec_init();
>  	acpi_debugfs_init();
> diff --git a/include/linux/acpi_iort.h b/include/linux/acpi_iort.h
> new file mode 100644
> index 0000000..fcacaf7
> --- /dev/null
> +++ b/include/linux/acpi_iort.h
> @@ -0,0 +1,30 @@
> +/*
> + * Copyright (C) 2016, Semihalf
> + *	Author: Tomasz Nowicki <tn@semihalf.com>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms and conditions of the GNU General Public License,
> + * version 2, as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
> + * more details.
> + *
> + * You should have received a copy of the GNU General Public License along with
> + * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
> + * Place - Suite 330, Boston, MA 02111-1307 USA.
> + */
> +
> +#ifndef __ACPI_IORT_H__
> +#define __ACPI_IORT_H__
> +
> +#include <linux/acpi.h>
> +
> +#ifdef CONFIG_ACPI_IORT
> +void acpi_iort_init(void);
> +#else
> +static inline void acpi_iort_init(void) { }
> +#endif
> +
> +#endif /* __ACPI_IORT_H__ */
> -- 
> 1.9.1
>
Tomasz Nowicki Sept. 12, 2016, 12:37 p.m. UTC | #3
Hi Rafael,

On 09.09.2016 11:20, Lorenzo Pieralisi wrote:
> Hi Rafael,
>
> On Wed, Sep 07, 2016 at 01:56:52PM +0200, Tomasz Nowicki wrote:
>> IORT shows representation of IO topology for ARM based systems.
>> It describes how various components are connected together on
>> parent-child basis e.g. PCI RC -> SMMU -> ITS. Also see IORT spec.
>> http://infocenter.arm.com/help/topic/com.arm.doc.den0049b/DEN0049B_IO_Remapping_Table.pdf
>>
>> Initial support allows to detect IORT table presence and save its
>> root pointer obtained through acpi_get_table(). The pointer validity
>> depends on acpi_gbl_permanent_mmap because if acpi_gbl_permanent_mmap
>> is not set while using IORT nodes we would dereference unmapped pointers.
>>
>> For the aforementioned reason call iort_table_detect() from acpi_init()
>> which guarantees acpi_gbl_permanent_mmap to be set at that point.
>>
>> Add generic helpers which are helpful for scanning and retrieving
>> information from IORT table content. List of the most important helpers:
>> - iort_find_dev_node() finds IORT node for a given device
>> - iort_node_map_rid() maps device RID and returns IORT node which provides
>>   final translation
>>
>> IORT support is placed under drivers/acpi/arm64/ new directory due to its
>> ARM64 specific nature. The code there is considered only for ARM64.
>> The long term plan is to keep all ARM64 specific tables support
>> in this place e.g. GTDT table.
>>
>> Signed-off-by: Tomasz Nowicki <tn@semihalf.com>
>> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org>
>> Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
>> ---
>
> Apart from the minor commit logs oversights we consider these two
> patches ready to go, please let us know if there is something you want
> changed since we are at risk of missing yet another merge window.
>
> It is ARM64 specific code, we created and moved the code to its
> ARM64 specific directory and we are happy to maintain it as such,
> we need your ACK to get this done so if there is something you
> want changed please let us know otherwise I would ask your ACK
> on these two patches to give Marc a go-ahead for -next and
> hopefully 4.9.

Kindly reminder. Is there anything we need to do more about these 
patches? Please let us know. Note this is the major thing for incoming 
IORT more advance feature.

Thanks,
Tomasz
Marc Zyngier Sept. 12, 2016, 1:04 p.m. UTC | #4
On 12/09/16 13:37, Tomasz Nowicki wrote:
> Hi Rafael,
> 
> On 09.09.2016 11:20, Lorenzo Pieralisi wrote:
>> Hi Rafael,
>>
>> On Wed, Sep 07, 2016 at 01:56:52PM +0200, Tomasz Nowicki wrote:
>>> IORT shows representation of IO topology for ARM based systems.
>>> It describes how various components are connected together on
>>> parent-child basis e.g. PCI RC -> SMMU -> ITS. Also see IORT spec.
>>> http://infocenter.arm.com/help/topic/com.arm.doc.den0049b/DEN0049B_IO_Remapping_Table.pdf
>>>
>>> Initial support allows to detect IORT table presence and save its
>>> root pointer obtained through acpi_get_table(). The pointer validity
>>> depends on acpi_gbl_permanent_mmap because if acpi_gbl_permanent_mmap
>>> is not set while using IORT nodes we would dereference unmapped pointers.
>>>
>>> For the aforementioned reason call iort_table_detect() from acpi_init()
>>> which guarantees acpi_gbl_permanent_mmap to be set at that point.
>>>
>>> Add generic helpers which are helpful for scanning and retrieving
>>> information from IORT table content. List of the most important helpers:
>>> - iort_find_dev_node() finds IORT node for a given device
>>> - iort_node_map_rid() maps device RID and returns IORT node which provides
>>>   final translation
>>>
>>> IORT support is placed under drivers/acpi/arm64/ new directory due to its
>>> ARM64 specific nature. The code there is considered only for ARM64.
>>> The long term plan is to keep all ARM64 specific tables support
>>> in this place e.g. GTDT table.
>>>
>>> Signed-off-by: Tomasz Nowicki <tn@semihalf.com>
>>> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org>
>>> Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
>>> ---
>>
>> Apart from the minor commit logs oversights we consider these two
>> patches ready to go, please let us know if there is something you want
>> changed since we are at risk of missing yet another merge window.
>>
>> It is ARM64 specific code, we created and moved the code to its
>> ARM64 specific directory and we are happy to maintain it as such,
>> we need your ACK to get this done so if there is something you
>> want changed please let us know otherwise I would ask your ACK
>> on these two patches to give Marc a go-ahead for -next and
>> hopefully 4.9.
> 
> Kindly reminder. Is there anything we need to do more about these 
> patches? Please let us know. Note this is the major thing for incoming 
> IORT more advance feature.

May I convey a slight sense of urgency here? I'd like to cut the irqchip
branch for 4.9 pretty soon (this week), in order to let it sink in -next
for a few days at the very least.

It'd be a bit disappointing if these patches missed the boat this time
again.

Thanks,

	M.
Rafael J. Wysocki Sept. 12, 2016, 1:43 p.m. UTC | #5
On Monday, September 12, 2016 02:04:29 PM Marc Zyngier wrote:
> On 12/09/16 13:37, Tomasz Nowicki wrote:
> > Hi Rafael,
> > 
> > On 09.09.2016 11:20, Lorenzo Pieralisi wrote:
> >> Hi Rafael,
> >>
> >> On Wed, Sep 07, 2016 at 01:56:52PM +0200, Tomasz Nowicki wrote:
> >>> IORT shows representation of IO topology for ARM based systems.
> >>> It describes how various components are connected together on
> >>> parent-child basis e.g. PCI RC -> SMMU -> ITS. Also see IORT spec.
> >>> http://infocenter.arm.com/help/topic/com.arm.doc.den0049b/DEN0049B_IO_Remapping_Table.pdf
> >>>
> >>> Initial support allows to detect IORT table presence and save its
> >>> root pointer obtained through acpi_get_table(). The pointer validity
> >>> depends on acpi_gbl_permanent_mmap because if acpi_gbl_permanent_mmap
> >>> is not set while using IORT nodes we would dereference unmapped pointers.
> >>>
> >>> For the aforementioned reason call iort_table_detect() from acpi_init()
> >>> which guarantees acpi_gbl_permanent_mmap to be set at that point.
> >>>
> >>> Add generic helpers which are helpful for scanning and retrieving
> >>> information from IORT table content. List of the most important helpers:
> >>> - iort_find_dev_node() finds IORT node for a given device
> >>> - iort_node_map_rid() maps device RID and returns IORT node which provides
> >>>   final translation
> >>>
> >>> IORT support is placed under drivers/acpi/arm64/ new directory due to its
> >>> ARM64 specific nature. The code there is considered only for ARM64.
> >>> The long term plan is to keep all ARM64 specific tables support
> >>> in this place e.g. GTDT table.
> >>>
> >>> Signed-off-by: Tomasz Nowicki <tn@semihalf.com>
> >>> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org>
> >>> Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
> >>> ---
> >>
> >> Apart from the minor commit logs oversights we consider these two
> >> patches ready to go, please let us know if there is something you want
> >> changed since we are at risk of missing yet another merge window.
> >>
> >> It is ARM64 specific code, we created and moved the code to its
> >> ARM64 specific directory and we are happy to maintain it as such,
> >> we need your ACK to get this done so if there is something you
> >> want changed please let us know otherwise I would ask your ACK
> >> on these two patches to give Marc a go-ahead for -next and
> >> hopefully 4.9.
> > 
> > Kindly reminder. Is there anything we need to do more about these 
> > patches? Please let us know. Note this is the major thing for incoming 
> > IORT more advance feature.
> 
> May I convey a slight sense of urgency here? I'd like to cut the irqchip
> branch for 4.9 pretty soon (this week), in order to let it sink in -next
> for a few days at the very least.
> 
> It'd be a bit disappointing if these patches missed the boat this time
> again.

Both [1-2/8] are fine by me.

Please feel free to add my ACKs to those when you apply them.

Thanks,
Rafael
diff mbox

Patch

diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
index 445ce28..d5c0614 100644
--- a/drivers/acpi/Kconfig
+++ b/drivers/acpi/Kconfig
@@ -521,4 +521,8 @@  config ACPI_CONFIGFS
 	  userspace. The configurable ACPI groups will be visible under
 	  /config/acpi, assuming configfs is mounted under /config.
 
+if ARM64
+source "drivers/acpi/arm64/Kconfig"
+endif
+
 endif	# ACPI
diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile
index 5ae9d85..e5ada78 100644
--- a/drivers/acpi/Makefile
+++ b/drivers/acpi/Makefile
@@ -105,3 +105,5 @@  obj-$(CONFIG_ACPI_CONFIGFS)	+= acpi_configfs.o
 
 video-objs			+= acpi_video.o video_detect.o
 obj-y				+= dptf/
+
+obj-$(CONFIG_ARM64)		+= arm64/
diff --git a/drivers/acpi/arm64/Kconfig b/drivers/acpi/arm64/Kconfig
new file mode 100644
index 0000000..4616da4
--- /dev/null
+++ b/drivers/acpi/arm64/Kconfig
@@ -0,0 +1,6 @@ 
+#
+# ACPI Configuration for ARM64
+#
+
+config ACPI_IORT
+	bool
diff --git a/drivers/acpi/arm64/Makefile b/drivers/acpi/arm64/Makefile
new file mode 100644
index 0000000..72331f2
--- /dev/null
+++ b/drivers/acpi/arm64/Makefile
@@ -0,0 +1 @@ 
+obj-$(CONFIG_ACPI_IORT) 	+= iort.o
diff --git a/drivers/acpi/arm64/iort.c b/drivers/acpi/arm64/iort.c
new file mode 100644
index 0000000..e28e256
--- /dev/null
+++ b/drivers/acpi/arm64/iort.c
@@ -0,0 +1,213 @@ 
+/*
+ * Copyright (C) 2016, Semihalf
+ *	Author: Tomasz Nowicki <tn@semihalf.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * This file implements early detection/parsing of I/O mapping
+ * reported to OS through firmware via I/O Remapping Table (IORT)
+ * IORT document number: ARM DEN 0049A
+ */
+
+#define pr_fmt(fmt)	"ACPI: IORT: " fmt
+
+#include <linux/acpi_iort.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+
+typedef acpi_status (*iort_find_node_callback)
+	(struct acpi_iort_node *node, void *context);
+
+/* Root pointer to the mapped IORT table */
+static struct acpi_table_header *iort_table;
+
+static LIST_HEAD(iort_msi_chip_list);
+static DEFINE_SPINLOCK(iort_msi_chip_lock);
+
+static struct acpi_iort_node *iort_scan_node(enum acpi_iort_node_type type,
+					     iort_find_node_callback callback,
+					     void *context)
+{
+	struct acpi_iort_node *iort_node, *iort_end;
+	struct acpi_table_iort *iort;
+	int i;
+
+	if (!iort_table)
+		return NULL;
+
+	/* Get the first IORT node */
+	iort = (struct acpi_table_iort *)iort_table;
+	iort_node = ACPI_ADD_PTR(struct acpi_iort_node, iort,
+				 iort->node_offset);
+	iort_end = ACPI_ADD_PTR(struct acpi_iort_node, iort_table,
+				iort_table->length);
+
+	for (i = 0; i < iort->node_count; i++) {
+		if (WARN_TAINT(iort_node >= iort_end, TAINT_FIRMWARE_WORKAROUND,
+			       "IORT node pointer overflows, bad table!\n"))
+			return NULL;
+
+		if (iort_node->type == type &&
+		    ACPI_SUCCESS(callback(iort_node, context)))
+				return iort_node;
+
+		iort_node = ACPI_ADD_PTR(struct acpi_iort_node, iort_node,
+					 iort_node->length);
+	}
+
+	return NULL;
+}
+
+static acpi_status iort_match_node_callback(struct acpi_iort_node *node,
+					    void *context)
+{
+	struct device *dev = context;
+	acpi_status status = AE_NOT_FOUND;
+
+	if (node->type == ACPI_IORT_NODE_NAMED_COMPONENT) {
+		struct acpi_buffer buf = { ACPI_ALLOCATE_BUFFER, NULL };
+		struct acpi_device *adev = to_acpi_device_node(dev->fwnode);
+		struct acpi_iort_named_component *ncomp;
+
+		if (!adev)
+			goto out;
+
+		status = acpi_get_name(adev->handle, ACPI_FULL_PATHNAME, &buf);
+		if (ACPI_FAILURE(status)) {
+			dev_warn(dev, "Can't get device full path name\n");
+			goto out;
+		}
+
+		ncomp = (struct acpi_iort_named_component *)node->node_data;
+		if (!strcmp(ncomp->device_name, buf.pointer))
+			status = AE_OK;
+
+		acpi_os_free(buf.pointer);
+	} else if (node->type == ACPI_IORT_NODE_PCI_ROOT_COMPLEX) {
+		struct acpi_iort_root_complex *pci_rc;
+		struct pci_bus *bus;
+
+		bus = to_pci_bus(dev);
+		pci_rc = (struct acpi_iort_root_complex *)node->node_data;
+
+		/*
+		 * It is assumed that PCI segment numbers maps one-to-one
+		 * with root complexes. Each segment number can represent only
+		 * one root complex.
+		 */
+		if (pci_rc->pci_segment_number == pci_domain_nr(bus))
+			status = AE_OK;
+	}
+out:
+	return status;
+}
+
+static int iort_id_map(struct acpi_iort_id_mapping *map, u8 type, u32 rid_in,
+		       u32 *rid_out)
+{
+	/* Single mapping does not care for input id */
+	if (map->flags & ACPI_IORT_ID_SINGLE_MAPPING) {
+		if (type == ACPI_IORT_NODE_NAMED_COMPONENT ||
+		    type == ACPI_IORT_NODE_PCI_ROOT_COMPLEX) {
+			*rid_out = map->output_base;
+			return 0;
+		}
+
+		pr_warn(FW_BUG "[map %p] SINGLE MAPPING flag not allowed for node type %d, skipping ID map\n",
+			map, type);
+		return -ENXIO;
+	}
+
+	if (rid_in < map->input_base ||
+	    (rid_in >= map->input_base + map->id_count))
+		return -ENXIO;
+
+	*rid_out = map->output_base + (rid_in - map->input_base);
+	return 0;
+}
+
+static struct acpi_iort_node *iort_node_map_rid(struct acpi_iort_node *node,
+						u32 rid_in, u32 *rid_out,
+						u8 type)
+{
+	u32 rid = rid_in;
+
+	/* Parse the ID mapping tree to find specified node type */
+	while (node) {
+		struct acpi_iort_id_mapping *map;
+		int i;
+
+		if (node->type == type) {
+			if (rid_out)
+				*rid_out = rid;
+			return node;
+		}
+
+		if (!node->mapping_offset || !node->mapping_count)
+			goto fail_map;
+
+		map = ACPI_ADD_PTR(struct acpi_iort_id_mapping, node,
+				   node->mapping_offset);
+
+		/* Firmware bug! */
+		if (!map->output_reference) {
+			pr_err(FW_BUG "[node %p type %d] ID map has NULL parent reference\n",
+			       node, node->type);
+			goto fail_map;
+		}
+
+		/* Do the RID translation */
+		for (i = 0; i < node->mapping_count; i++, map++) {
+			if (!iort_id_map(map, node->type, rid, &rid))
+				break;
+		}
+
+		if (i == node->mapping_count)
+			goto fail_map;
+
+		node = ACPI_ADD_PTR(struct acpi_iort_node, iort_table,
+				    map->output_reference);
+	}
+
+fail_map:
+	/* Map input RID to output RID unchanged on mapping failure*/
+	if (rid_out)
+		*rid_out = rid_in;
+
+	return NULL;
+}
+
+static struct acpi_iort_node *iort_find_dev_node(struct device *dev)
+{
+	struct pci_bus *pbus;
+
+	if (!dev_is_pci(dev))
+		return iort_scan_node(ACPI_IORT_NODE_NAMED_COMPONENT,
+				      iort_match_node_callback, dev);
+
+	/* Find a PCI root bus */
+	pbus = to_pci_dev(dev)->bus;
+	while (!pci_is_root_bus(pbus))
+		pbus = pbus->parent;
+
+	return iort_scan_node(ACPI_IORT_NODE_PCI_ROOT_COMPLEX,
+			      iort_match_node_callback, &pbus->dev);
+}
+
+void __init acpi_iort_init(void)
+{
+	acpi_status status;
+
+	status = acpi_get_table(ACPI_SIG_IORT, 0, &iort_table);
+	if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
+		const char *msg = acpi_format_exception(status);
+		pr_err("Failed to get table, %s\n", msg);
+	}
+}
diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c
index 85b7d07..e56e643 100644
--- a/drivers/acpi/bus.c
+++ b/drivers/acpi/bus.c
@@ -36,6 +36,7 @@ 
 #ifdef CONFIG_X86
 #include <asm/mpspec.h>
 #endif
+#include <linux/acpi_iort.h>
 #include <linux/pci.h>
 #include <acpi/apei.h>
 #include <linux/dmi.h>
@@ -1186,6 +1187,7 @@  static int __init acpi_init(void)
 	}
 
 	pci_mmcfg_late_init();
+	acpi_iort_init();
 	acpi_scan_init();
 	acpi_ec_init();
 	acpi_debugfs_init();
diff --git a/include/linux/acpi_iort.h b/include/linux/acpi_iort.h
new file mode 100644
index 0000000..fcacaf7
--- /dev/null
+++ b/include/linux/acpi_iort.h
@@ -0,0 +1,30 @@ 
+/*
+ * Copyright (C) 2016, Semihalf
+ *	Author: Tomasz Nowicki <tn@semihalf.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
+ * Place - Suite 330, Boston, MA 02111-1307 USA.
+ */
+
+#ifndef __ACPI_IORT_H__
+#define __ACPI_IORT_H__
+
+#include <linux/acpi.h>
+
+#ifdef CONFIG_ACPI_IORT
+void acpi_iort_init(void);
+#else
+static inline void acpi_iort_init(void) { }
+#endif
+
+#endif /* __ACPI_IORT_H__ */