diff mbox

arm64: dts: ls2080a: Add 'dma-coherent' for ls2080a PCI nodes

Message ID 1473301904-27259-1-git-send-email-Gang.Liu@nxp.com (mailing list archive)
State New, archived
Headers show

Commit Message

Liu Gang Sept. 8, 2016, 2:31 a.m. UTC 
The 'dma-coherent' indicates that the hardware IP block can ensure
the coherency of the data transferred from/to the IP block. This
can avoid the software cache flush/invalid actions, and improve
the performance significantly.

The PCI IP block of ls2080a has this capability, so adding this
feature to improve the PCI performance.

Signed-off-by: Liu Gang <Gang.Liu@nxp.com>
---
 arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi | 4 ++++
 1 file changed, 4 insertions(+)

Comments

Shawn Guo Sept. 9, 2016, 6:05 a.m. UTC | #1 
On Thu, Sep 08, 2016 at 10:31:44AM +0800, Liu Gang wrote:
> The 'dma-coherent' indicates that the hardware IP block can ensure
> the coherency of the data transferred from/to the IP block. This
> can avoid the software cache flush/invalid actions, and improve
> the performance significantly.
> 
> The PCI IP block of ls2080a has this capability, so adding this
> feature to improve the PCI performance.
> 
> Signed-off-by: Liu Gang <Gang.Liu@nxp.com>

Applied, thanks.
diff mbox

Patch

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
index e3b6034..4eba766 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
@@ -588,6 +588,7 @@ 
 			#address-cells = <3>;
 			#size-cells = <2>;
 			device_type = "pci";
+			dma-coherent;
 			num-lanes = <4>;
 			bus-range = <0x0 0xff>;
 			ranges = <0x81000000 0x0 0x00000000 0x10 0x00010000 0x0 0x00010000   /* downstream I/O */
@@ -612,6 +613,7 @@ 
 			#address-cells = <3>;
 			#size-cells = <2>;
 			device_type = "pci";
+			dma-coherent;
 			num-lanes = <4>;
 			bus-range = <0x0 0xff>;
 			ranges = <0x81000000 0x0 0x00000000 0x12 0x00010000 0x0 0x00010000   /* downstream I/O */
@@ -636,6 +638,7 @@ 
 			#address-cells = <3>;
 			#size-cells = <2>;
 			device_type = "pci";
+			dma-coherent;
 			num-lanes = <8>;
 			bus-range = <0x0 0xff>;
 			ranges = <0x81000000 0x0 0x00000000 0x14 0x00010000 0x0 0x00010000   /* downstream I/O */
@@ -660,6 +663,7 @@ 
 			#address-cells = <3>;
 			#size-cells = <2>;
 			device_type = "pci";
+			dma-coherent;
 			num-lanes = <4>;
 			bus-range = <0x0 0xff>;
 			ranges = <0x81000000 0x0 0x00000000 0x16 0x00010000 0x0 0x00010000   /* downstream I/O */