| Message ID | 1474874531-26703-1-git-send-email-robert.jarzmik@free.fr (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Robert Jarzmik <robert.jarzmik@free.fr> writes: > Since gpio-pxa was redesigned to differenciate gpio0, gpio1 and the > gpio-mux interrupt as in the hardware IP, the device-tree description > should be amended so that interrupts from gpio0 and gpio1 can be mapped > to consumers. > > This is especially true on lubbock and mainstone devices where gpio0 is > multiplexed on pxa_cplds for ethernet, sa1111, usb udc, and other > devices. > > Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Applied to pxa/dt. Cheers.
diff --git a/arch/arm/boot/dts/pxa2xx.dtsi b/arch/arm/boot/dts/pxa2xx.dtsi index 3ff077ca4400..e4ebcde17837 100644 --- a/arch/arm/boot/dts/pxa2xx.dtsi +++ b/arch/arm/boot/dts/pxa2xx.dtsi @@ -54,8 +54,8 @@ reg = <0x40e00000 0x10000>; gpio-controller; #gpio-cells = <0x2>; - interrupts = <10>; - interrupt-names = "gpio_mux"; + interrupts = <8>, <9>, <10>; + interrupt-names = "gpio0", "gpio1", "gpio_mux"; interrupt-controller; #interrupt-cells = <0x2>; ranges;
Since gpio-pxa was redesigned to differenciate gpio0, gpio1 and the gpio-mux interrupt as in the hardware IP, the device-tree description should be amended so that interrupts from gpio0 and gpio1 can be mapped to consumers. This is especially true on lubbock and mainstone devices where gpio0 is multiplexed on pxa_cplds for ethernet, sa1111, usb udc, and other devices. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> --- arch/arm/boot/dts/pxa2xx.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)