diff mbox

[v3,2/3] drm: zte: add initial vou drm driver

Message ID 1476948625-8521-3-git-send-email-shawn.guo@linaro.org (mailing list archive)
State New, archived
Headers show

Commit Message

Shawn Guo Oct. 20, 2016, 7:30 a.m. UTC
It adds the initial ZTE VOU display controller DRM driver.  There are
still some features to be added, like overlay plane, scaling, and more
output devices support.  But it's already useful with dual CRTCs and
HDMI monitor working.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
 drivers/gpu/drm/Kconfig          |   2 +
 drivers/gpu/drm/Makefile         |   1 +
 drivers/gpu/drm/zte/Kconfig      |   8 +
 drivers/gpu/drm/zte/Makefile     |   7 +
 drivers/gpu/drm/zte/zx_drm_drv.c | 267 +++++++++++++
 drivers/gpu/drm/zte/zx_drm_drv.h |  36 ++
 drivers/gpu/drm/zte/zx_hdmi.c    | 678 +++++++++++++++++++++++++++++++++
 drivers/gpu/drm/zte/zx_plane.c   | 375 ++++++++++++++++++
 drivers/gpu/drm/zte/zx_plane.h   |  26 ++
 drivers/gpu/drm/zte/zx_vou.c     | 799 +++++++++++++++++++++++++++++++++++++++
 drivers/gpu/drm/zte/zx_vou.h     |  46 +++
 11 files changed, 2245 insertions(+)
 create mode 100644 drivers/gpu/drm/zte/Kconfig
 create mode 100644 drivers/gpu/drm/zte/Makefile
 create mode 100644 drivers/gpu/drm/zte/zx_drm_drv.c
 create mode 100644 drivers/gpu/drm/zte/zx_drm_drv.h
 create mode 100644 drivers/gpu/drm/zte/zx_hdmi.c
 create mode 100644 drivers/gpu/drm/zte/zx_plane.c
 create mode 100644 drivers/gpu/drm/zte/zx_plane.h
 create mode 100644 drivers/gpu/drm/zte/zx_vou.c
 create mode 100644 drivers/gpu/drm/zte/zx_vou.h

Comments

Gustavo Padovan Oct. 20, 2016, 12:29 p.m. UTC | #1
2016-10-20 Shawn Guo <shawn.guo@linaro.org>:

> It adds the initial ZTE VOU display controller DRM driver.  There are
> still some features to be added, like overlay plane, scaling, and more
> output devices support.  But it's already useful with dual CRTCs and
> HDMI monitor working.
> 
> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
> ---
>  drivers/gpu/drm/Kconfig          |   2 +
>  drivers/gpu/drm/Makefile         |   1 +
>  drivers/gpu/drm/zte/Kconfig      |   8 +
>  drivers/gpu/drm/zte/Makefile     |   7 +
>  drivers/gpu/drm/zte/zx_drm_drv.c | 267 +++++++++++++
>  drivers/gpu/drm/zte/zx_drm_drv.h |  36 ++
>  drivers/gpu/drm/zte/zx_hdmi.c    | 678 +++++++++++++++++++++++++++++++++
>  drivers/gpu/drm/zte/zx_plane.c   | 375 ++++++++++++++++++
>  drivers/gpu/drm/zte/zx_plane.h   |  26 ++
>  drivers/gpu/drm/zte/zx_vou.c     | 799 +++++++++++++++++++++++++++++++++++++++
>  drivers/gpu/drm/zte/zx_vou.h     |  46 +++
>  11 files changed, 2245 insertions(+)
>  create mode 100644 drivers/gpu/drm/zte/Kconfig
>  create mode 100644 drivers/gpu/drm/zte/Makefile
>  create mode 100644 drivers/gpu/drm/zte/zx_drm_drv.c
>  create mode 100644 drivers/gpu/drm/zte/zx_drm_drv.h
>  create mode 100644 drivers/gpu/drm/zte/zx_hdmi.c
>  create mode 100644 drivers/gpu/drm/zte/zx_plane.c
>  create mode 100644 drivers/gpu/drm/zte/zx_plane.h
>  create mode 100644 drivers/gpu/drm/zte/zx_vou.c
>  create mode 100644 drivers/gpu/drm/zte/zx_vou.h
> 
> diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig
> index 483059a22b1b..a91f8cecbe0f 100644
> --- a/drivers/gpu/drm/Kconfig
> +++ b/drivers/gpu/drm/Kconfig
> @@ -223,6 +223,8 @@ source "drivers/gpu/drm/hisilicon/Kconfig"
>  
>  source "drivers/gpu/drm/mediatek/Kconfig"
>  
> +source "drivers/gpu/drm/zte/Kconfig"
> +
>  # Keep legacy drivers last
>  
>  menuconfig DRM_LEGACY
> diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile
> index 25c720454017..f3251750c92b 100644
> --- a/drivers/gpu/drm/Makefile
> +++ b/drivers/gpu/drm/Makefile
> @@ -86,3 +86,4 @@ obj-$(CONFIG_DRM_FSL_DCU) += fsl-dcu/
>  obj-$(CONFIG_DRM_ETNAVIV) += etnaviv/
>  obj-$(CONFIG_DRM_ARCPGU)+= arc/
>  obj-y			+= hisilicon/
> +obj-$(CONFIG_DRM_ZTE)	+= zte/
> diff --git a/drivers/gpu/drm/zte/Kconfig b/drivers/gpu/drm/zte/Kconfig
> new file mode 100644
> index 000000000000..4065b2840f1c
> --- /dev/null
> +++ b/drivers/gpu/drm/zte/Kconfig
> @@ -0,0 +1,8 @@
> +config DRM_ZTE
> +	tristate "DRM Support for ZTE SoCs"
> +	depends on DRM && ARCH_ZX
> +	select DRM_KMS_CMA_HELPER
> +	select DRM_KMS_FB_HELPER
> +	select DRM_KMS_HELPER
> +	help
> +	  Choose this option to enable DRM on ZTE ZX SoCs.
> diff --git a/drivers/gpu/drm/zte/Makefile b/drivers/gpu/drm/zte/Makefile
> new file mode 100644
> index 000000000000..699180bfd57c
> --- /dev/null
> +++ b/drivers/gpu/drm/zte/Makefile
> @@ -0,0 +1,7 @@
> +zxdrm-y := \
> +	zx_drm_drv.o \
> +	zx_hdmi.o \
> +	zx_plane.o \
> +	zx_vou.o
> +
> +obj-$(CONFIG_DRM_ZTE) += zxdrm.o
> diff --git a/drivers/gpu/drm/zte/zx_drm_drv.c b/drivers/gpu/drm/zte/zx_drm_drv.c
> new file mode 100644
> index 000000000000..2476a9b92cea
> --- /dev/null
> +++ b/drivers/gpu/drm/zte/zx_drm_drv.c
> @@ -0,0 +1,267 @@
> +/*
> + * Copyright 2016 Linaro Ltd.
> + * Copyright 2016 ZTE Corporation.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/component.h>
> +#include <linux/list.h>
> +#include <linux/module.h>
> +#include <linux/of_graph.h>
> +#include <linux/of_platform.h>
> +#include <linux/spinlock.h>
> +
> +#include <drm/drm_atomic_helper.h>
> +#include <drm/drm_crtc.h>
> +#include <drm/drm_crtc_helper.h>
> +#include <drm/drm_fb_cma_helper.h>
> +#include <drm/drm_fb_helper.h>
> +#include <drm/drm_gem_cma_helper.h>
> +#include <drm/drm_of.h>
> +#include <drm/drmP.h>
> +
> +#include "zx_drm_drv.h"
> +#include "zx_vou.h"
> +
> +struct zx_drm_private {
> +	struct drm_fbdev_cma *fbdev;
> +};
> +
> +static void zx_drm_fb_output_poll_changed(struct drm_device *drm)
> +{
> +	struct zx_drm_private *priv = drm->dev_private;
> +
> +	drm_fbdev_cma_hotplug_event(priv->fbdev);
> +}
> +
> +static const struct drm_mode_config_funcs zx_drm_mode_config_funcs = {
> +	.fb_create = drm_fb_cma_create,
> +	.output_poll_changed = zx_drm_fb_output_poll_changed,
> +	.atomic_check = drm_atomic_helper_check,
> +	.atomic_commit = drm_atomic_helper_commit,
> +};
> +
> +static void zx_drm_lastclose(struct drm_device *drm)
> +{
> +	struct zx_drm_private *priv = drm->dev_private;
> +
> +	drm_fbdev_cma_restore_mode(priv->fbdev);
> +}
> +
> +static const struct file_operations zx_drm_fops = {
> +	.owner = THIS_MODULE,
> +	.open = drm_open,
> +	.release = drm_release,
> +	.unlocked_ioctl = drm_ioctl,
> +#ifdef CONFIG_COMPAT
> +	.compat_ioctl = drm_compat_ioctl,
> +#endif
> +	.poll = drm_poll,
> +	.read = drm_read,
> +	.llseek = noop_llseek,
> +	.mmap = drm_gem_cma_mmap,
> +};
> +
> +static struct drm_driver zx_drm_driver = {
> +	.driver_features = DRIVER_GEM | DRIVER_MODESET | DRIVER_PRIME |
> +			   DRIVER_ATOMIC,
> +	.lastclose = zx_drm_lastclose,
> +	.get_vblank_counter = drm_vblank_no_hw_counter,
> +	.enable_vblank = zx_vou_enable_vblank,
> +	.disable_vblank = zx_vou_disable_vblank,
> +	.gem_free_object = drm_gem_cma_free_object,
> +	.gem_vm_ops = &drm_gem_cma_vm_ops,
> +	.dumb_create = drm_gem_cma_dumb_create,
> +	.dumb_map_offset = drm_gem_cma_dumb_map_offset,
> +	.dumb_destroy = drm_gem_dumb_destroy,
> +	.prime_handle_to_fd = drm_gem_prime_handle_to_fd,
> +	.prime_fd_to_handle = drm_gem_prime_fd_to_handle,
> +	.gem_prime_export = drm_gem_prime_export,
> +	.gem_prime_import = drm_gem_prime_import,
> +	.gem_prime_get_sg_table = drm_gem_cma_prime_get_sg_table,
> +	.gem_prime_import_sg_table = drm_gem_cma_prime_import_sg_table,
> +	.gem_prime_vmap = drm_gem_cma_prime_vmap,
> +	.gem_prime_vunmap = drm_gem_cma_prime_vunmap,
> +	.gem_prime_mmap = drm_gem_cma_prime_mmap,
> +	.fops = &zx_drm_fops,
> +	.name = "zx-vou",
> +	.desc = "ZTE VOU Controller DRM",
> +	.date = "20160811",
> +	.major = 1,
> +	.minor = 0,
> +};
> +
> +static int zx_drm_bind(struct device *dev)
> +{
> +	struct drm_device *drm;
> +	struct zx_drm_private *priv;
> +	int ret;
> +
> +	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
> +	if (!priv)
> +		return -ENOMEM;
> +
> +	drm = drm_dev_alloc(&zx_drm_driver, dev);
> +	if (!drm)
> +		return -ENOMEM;
> +
> +	drm->dev_private = priv;
> +	dev_set_drvdata(dev, drm);
> +
> +	drm_mode_config_init(drm);
> +	drm->mode_config.min_width = 16;
> +	drm->mode_config.min_height = 16;
> +	drm->mode_config.max_width = 4096;
> +	drm->mode_config.max_height = 4096;
> +	drm->mode_config.funcs = &zx_drm_mode_config_funcs;
> +
> +	ret = component_bind_all(dev, drm);
> +	if (ret) {
> +		dev_err(dev, "failed to bind all components: %d\n", ret);
> +		goto out_unregister;
> +	}
> +
> +	ret = drm_vblank_init(drm, drm->mode_config.num_crtc);
> +	if (ret < 0) {
> +		dev_err(dev, "failed to init vblank: %d\n", ret);
> +		goto out_unbind;
> +	}
> +
> +	/*
> +	 * We will manage irq handler on our own.  In this case, irq_enabled
> +	 * need to be true for using vblank core support.
> +	 */
> +	drm->irq_enabled = true;
> +
> +	drm_mode_config_reset(drm);
> +	drm_kms_helper_poll_init(drm);
> +
> +	priv->fbdev = drm_fbdev_cma_init(drm, 32, drm->mode_config.num_crtc,
> +					 drm->mode_config.num_connector);
> +	if (IS_ERR(priv->fbdev)) {
> +		ret = PTR_ERR(priv->fbdev);
> +		dev_err(dev, "failed to init cma fbdev: %d\n", ret);
> +		priv->fbdev = NULL;
> +		goto out_poll_fini;
> +	}
> +
> +	ret = drm_dev_register(drm, 0);
> +	if (ret)
> +		goto out_fbdev_fini;
> +
> +	return 0;
> +
> +out_fbdev_fini:
> +	if (priv->fbdev) {
> +		drm_fbdev_cma_fini(priv->fbdev);
> +		priv->fbdev = NULL;
> +	}
> +out_poll_fini:
> +	drm_kms_helper_poll_fini(drm);
> +	drm_mode_config_cleanup(drm);
> +	drm_vblank_cleanup(drm);
> +out_unbind:
> +	component_unbind_all(dev, drm);
> +out_unregister:
> +	dev_set_drvdata(dev, NULL);
> +	drm->dev_private = NULL;
> +	drm_dev_unref(drm);
> +	return ret;
> +}
> +
> +static void zx_drm_unbind(struct device *dev)
> +{
> +	struct drm_device *drm = dev_get_drvdata(dev);
> +	struct zx_drm_private *priv = drm->dev_private;
> +
> +	drm_dev_unregister(drm);
> +	if (priv->fbdev) {
> +		drm_fbdev_cma_fini(priv->fbdev);
> +		priv->fbdev = NULL;
> +	}
> +	drm_kms_helper_poll_fini(drm);
> +	drm_mode_config_cleanup(drm);
> +	drm_vblank_cleanup(drm);
> +	component_unbind_all(dev, drm);
> +	dev_set_drvdata(dev, NULL);
> +	drm->dev_private = NULL;
> +	drm_dev_unref(drm);
> +}
> +
> +static const struct component_master_ops zx_drm_master_ops = {
> +	.bind = zx_drm_bind,
> +	.unbind = zx_drm_unbind,
> +};
> +
> +static int compare_of(struct device *dev, void *data)
> +{
> +	return dev->of_node == data;
> +}
> +
> +static int zx_drm_probe(struct platform_device *pdev)
> +{
> +	struct device *dev = &pdev->dev;
> +	struct device_node *parent = dev->of_node;
> +	struct device_node *child;
> +	struct component_match *match = NULL;
> +	int ret;
> +
> +	ret = of_platform_populate(parent, NULL, NULL, dev);
> +	if (ret)
> +		return ret;
> +
> +	for_each_available_child_of_node(parent, child) {
> +		component_match_add(dev, &match, compare_of, child);
> +		of_node_put(child);
> +	}
> +
> +	return component_master_add_with_match(dev, &zx_drm_master_ops, match);
> +}
> +
> +static int zx_drm_remove(struct platform_device *pdev)
> +{
> +	component_master_del(&pdev->dev, &zx_drm_master_ops);
> +	return 0;
> +}
> +
> +static const struct of_device_id zx_drm_of_match[] = {
> +	{ .compatible = "zte,zx296718-vou", },
> +	{ /* end */ },
> +};
> +MODULE_DEVICE_TABLE(of, zx_drm_of_match);
> +
> +static struct platform_driver zx_drm_platform_driver = {
> +	.probe = zx_drm_probe,
> +	.remove = zx_drm_remove,
> +	.driver	= {
> +		.name = "zx-drm",
> +		.of_match_table	= zx_drm_of_match,
> +	},
> +};
> +
> +static struct platform_driver *drivers[] = {
> +	&zx_crtc_driver,
> +	&zx_hdmi_driver,
> +	&zx_drm_platform_driver,
> +};
> +
> +static int zx_drm_init(void)
> +{
> +	return platform_register_drivers(drivers, ARRAY_SIZE(drivers));
> +}
> +module_init(zx_drm_init);
> +
> +static void zx_drm_exit(void)
> +{
> +	platform_unregister_drivers(drivers, ARRAY_SIZE(drivers));
> +}
> +module_exit(zx_drm_exit);
> +
> +MODULE_AUTHOR("Shawn Guo <shawn.guo@linaro.org>");
> +MODULE_DESCRIPTION("ZTE ZX VOU DRM driver");
> +MODULE_LICENSE("GPL v2");
> diff --git a/drivers/gpu/drm/zte/zx_drm_drv.h b/drivers/gpu/drm/zte/zx_drm_drv.h
> new file mode 100644
> index 000000000000..e65cd18a6cba
> --- /dev/null
> +++ b/drivers/gpu/drm/zte/zx_drm_drv.h
> @@ -0,0 +1,36 @@
> +/*
> + * Copyright 2016 Linaro Ltd.
> + * Copyright 2016 ZTE Corporation.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + */
> +
> +#ifndef __ZX_DRM_DRV_H__
> +#define __ZX_DRM_DRV_H__
> +
> +extern struct platform_driver zx_crtc_driver;
> +extern struct platform_driver zx_hdmi_driver;
> +
> +static inline u32 zx_readl(void __iomem *reg)
> +{
> +	return readl_relaxed(reg);
> +}
> +
> +static inline void zx_writel(void __iomem *reg, u32 val)
> +{
> +	writel_relaxed(val, reg);
> +}
> +
> +static inline void zx_writel_mask(void __iomem *reg, u32 mask, u32 val)
> +{
> +	u32 tmp;
> +
> +	tmp = zx_readl(reg);
> +	tmp = (tmp & ~mask) | (val & mask);
> +	zx_writel(reg, tmp);
> +}
> +
> +#endif /* __ZX_DRM_DRV_H__ */
> diff --git a/drivers/gpu/drm/zte/zx_hdmi.c b/drivers/gpu/drm/zte/zx_hdmi.c
> new file mode 100644
> index 000000000000..81e1c3716ed8
> --- /dev/null
> +++ b/drivers/gpu/drm/zte/zx_hdmi.c
> @@ -0,0 +1,678 @@
> +/*
> + * Copyright 2016 Linaro Ltd.
> + * Copyright 2016 ZTE Corporation.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/component.h>
> +#include <linux/delay.h>
> +#include <linux/err.h>
> +#include <linux/hdmi.h>
> +#include <linux/irq.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/module.h>
> +#include <linux/mutex.h>
> +#include <linux/of_device.h>
> +
> +#include <drm/drm_atomic_helper.h>
> +#include <drm/drm_crtc_helper.h>
> +#include <drm/drm_edid.h>
> +#include <drm/drm_of.h>
> +#include <drm/drmP.h>
> +
> +#include "zx_vou.h"
> +
> +#define FUNC_SEL			0x000b
> +#define FUNC_HDMI_EN			BIT(0)
> +#define CLKPWD				0x000d
> +#define CLKPWD_PDIDCK			BIT(2)
> +#define PWD_SRST			0x0010
> +#define P2T_CTRL			0x0066
> +#define P2T_DC_PKT_EN			BIT(7)
> +#define L1_INTR_STAT			0x007e
> +#define L1_INTR_STAT_INTR1		BIT(0)
> +#define INTR1_STAT			0x008f
> +#define INTR1_MASK			0x0095
> +#define INTR1_MONITOR_DETECT		(BIT(5) | BIT(6))
> +#define ZX_DDC_ADDR			0x00ed
> +#define ZX_DDC_SEGM			0x00ee
> +#define ZX_DDC_OFFSET			0x00ef
> +#define ZX_DDC_DIN_CNT1			0x00f0
> +#define ZX_DDC_DIN_CNT2			0x00f1
> +#define ZX_DDC_CMD			0x00f3
> +#define DDC_CMD_MASK			0xf
> +#define DDC_CMD_CLEAR_FIFO		0x9
> +#define DDC_CMD_SEQUENTIAL_READ		0x2
> +#define ZX_DDC_DATA			0x00f4
> +#define ZX_DDC_DOUT_CNT			0x00f5
> +#define DDC_DOUT_CNT_MASK		0x1f
> +#define TEST_TXCTRL			0x00f7
> +#define TEST_TXCTRL_HDMI_MODE		BIT(1)
> +#define HDMICTL4			0x0235
> +#define TPI_HPD_RSEN			0x063b
> +#define TPI_HPD_CONNECTION		(BIT(1) | BIT(2))
> +#define TPI_INFO_FSEL			0x06bf
> +#define FSEL_AVI			0
> +#define FSEL_GBD			1
> +#define FSEL_AUDIO			2
> +#define FSEL_SPD			3
> +#define FSEL_MPEG			4
> +#define FSEL_VSIF			5
> +#define TPI_INFO_B0			0x06c0
> +#define TPI_INFO_EN			0x06df
> +#define TPI_INFO_TRANS_EN		BIT(7)
> +#define TPI_INFO_TRANS_RPT		BIT(6)
> +#define TPI_DDC_MASTER_EN		0x06f8
> +#define HW_DDC_MASTER			BIT(7)
> +
> +#define ZX_HDMI_INFOFRAME_SIZE		31
> +
> +#define DDC_SEGMENT_ADDR		0x30
> +
> +struct zx_hdmi_i2c {
> +	struct i2c_adapter adap;
> +	struct mutex lock;
> +};
> +
> +struct zx_hdmi {
> +	struct drm_connector connector;
> +	struct drm_encoder encoder;
> +	struct zx_hdmi_i2c *ddc;
> +	struct device *dev;
> +	struct drm_device *drm;
> +	void __iomem *mmio;
> +	struct clk *cec_clk;
> +	struct clk *osc_clk;
> +	struct clk *xclk;
> +	bool sink_is_hdmi;
> +	bool sink_has_audio;
> +	const struct vou_inf *inf;
> +};
> +
> +#define to_zx_hdmi(x) container_of(x, struct zx_hdmi, x)
> +
> +static const struct vou_inf vou_inf_hdmi = {
> +	.id = VOU_HDMI,
> +	.data_sel = VOU_YUV444,
> +	.clocks_en_bits = BIT(24) | BIT(18) | BIT(6),
> +	.clocks_sel_bits = BIT(13) | BIT(2),
> +};
> +
> +static inline u8 hdmi_readb(struct zx_hdmi *hdmi, u16 offset)
> +{
> +	return readl_relaxed(hdmi->mmio + offset * 4);
> +}
> +
> +static inline void hdmi_writeb(struct zx_hdmi *hdmi, u16 offset, u8 val)
> +{
> +	writel_relaxed(val, hdmi->mmio + offset * 4);
> +}
> +
> +static inline void hdmi_writeb_mask(struct zx_hdmi *hdmi, u16 offset,
> +				    u8 mask, u8 val)
> +{
> +	u8 tmp;
> +
> +	tmp = hdmi_readb(hdmi, offset);
> +	tmp = (tmp & ~mask) | (val & mask);
> +	hdmi_writeb(hdmi, offset, tmp);
> +}
> +
> +static int zx_hdmi_infoframe_trans(struct zx_hdmi *hdmi,
> +				   union hdmi_infoframe *frame, u8 fsel)
> +{
> +	u8 buffer[ZX_HDMI_INFOFRAME_SIZE];
> +	int num;
> +	int i;
> +
> +	hdmi_writeb(hdmi, TPI_INFO_FSEL, fsel);
> +
> +	num = hdmi_infoframe_pack(frame, buffer, ZX_HDMI_INFOFRAME_SIZE);
> +	if (num < 0) {
> +		dev_err(hdmi->dev, "failed to pack infoframe: %d\n", num);
> +		return num;
> +	}
> +
> +	for (i = 0; i < num; i++)
> +		hdmi_writeb(hdmi, TPI_INFO_B0 + i, buffer[i]);
> +
> +	hdmi_writeb_mask(hdmi, TPI_INFO_EN, TPI_INFO_TRANS_RPT,
> +			 TPI_INFO_TRANS_RPT);
> +	hdmi_writeb_mask(hdmi, TPI_INFO_EN, TPI_INFO_TRANS_EN,
> +			 TPI_INFO_TRANS_EN);
> +
> +	return num;
> +}
> +
> +static int zx_hdmi_config_video_vsi(struct zx_hdmi *hdmi,
> +				    struct drm_display_mode *mode)
> +{
> +	union hdmi_infoframe frame;
> +	int ret;
> +
> +	ret = drm_hdmi_vendor_infoframe_from_display_mode(&frame.vendor.hdmi,
> +							  mode);
> +	if (ret) {
> +		dev_err(hdmi->dev, "failed to get vendor infoframe: %d\n", ret);
> +		return ret;
> +	}
> +
> +	return zx_hdmi_infoframe_trans(hdmi, &frame, FSEL_VSIF);
> +}
> +
> +static int zx_hdmi_config_video_avi(struct zx_hdmi *hdmi,
> +				    struct drm_display_mode *mode)
> +{
> +	union hdmi_infoframe frame;
> +	int ret;
> +
> +	ret = drm_hdmi_avi_infoframe_from_display_mode(&frame.avi, mode);
> +	if (ret) {
> +		dev_err(hdmi->dev, "failed to get avi infoframe: %d\n", ret);
> +		return ret;
> +	}
> +
> +	/* We always use YUV444 for HDMI output. */
> +	frame.avi.colorspace = HDMI_COLORSPACE_YUV444;
> +
> +	return zx_hdmi_infoframe_trans(hdmi, &frame, FSEL_AVI);
> +}
> +
> +static void zx_hdmi_encoder_mode_set(struct drm_encoder *encoder,
> +				     struct drm_display_mode *mode,
> +				     struct drm_display_mode *adj_mode)
> +{
> +	struct zx_hdmi *hdmi = to_zx_hdmi(encoder);
> +
> +	if (hdmi->sink_is_hdmi) {
> +		zx_hdmi_config_video_avi(hdmi, mode);
> +		zx_hdmi_config_video_vsi(hdmi, mode);
> +	}
> +}
> +
> +static void zx_hdmi_encoder_enable(struct drm_encoder *encoder)
> +{
> +	struct zx_hdmi *hdmi = to_zx_hdmi(encoder);
> +
> +	vou_inf_enable(hdmi->inf, encoder->crtc);
> +}
> +
> +static void zx_hdmi_encoder_disable(struct drm_encoder *encoder)
> +{
> +	struct zx_hdmi *hdmi = to_zx_hdmi(encoder);
> +
> +	vou_inf_disable(hdmi->inf, encoder->crtc);
> +}
> +
> +static const struct drm_encoder_helper_funcs zx_hdmi_encoder_helper_funcs = {
> +	.enable	= zx_hdmi_encoder_enable,
> +	.disable = zx_hdmi_encoder_disable,
> +	.mode_set = zx_hdmi_encoder_mode_set,
> +};
> +
> +static const struct drm_encoder_funcs zx_hdmi_encoder_funcs = {
> +	.destroy = drm_encoder_cleanup,
> +};
> +
> +static int zx_hdmi_connector_get_modes(struct drm_connector *connector)
> +{
> +	struct zx_hdmi *hdmi = to_zx_hdmi(connector);
> +	struct edid *edid;
> +	int ret;
> +
> +	edid = drm_get_edid(connector, &hdmi->ddc->adap);
> +	if (!edid)
> +		return 0;
> +
> +	hdmi->sink_is_hdmi = drm_detect_hdmi_monitor(edid);
> +	hdmi->sink_has_audio = drm_detect_monitor_audio(edid);
> +	drm_mode_connector_update_edid_property(connector, edid);
> +	ret = drm_add_edid_modes(connector, edid);
> +	kfree(edid);
> +
> +	return ret;
> +}
> +
> +static enum drm_mode_status
> +zx_hdmi_connector_mode_valid(struct drm_connector *connector,
> +			     struct drm_display_mode *mode)
> +{
> +	return MODE_OK;
> +}
> +
> +static struct drm_connector_helper_funcs zx_hdmi_connector_helper_funcs = {
> +	.get_modes = zx_hdmi_connector_get_modes,
> +	.mode_valid = zx_hdmi_connector_mode_valid,
> +};
> +
> +static enum drm_connector_status
> +zx_hdmi_connector_detect(struct drm_connector *connector, bool force)
> +{
> +	struct zx_hdmi *hdmi = to_zx_hdmi(connector);
> +
> +	return (hdmi_readb(hdmi, TPI_HPD_RSEN) & TPI_HPD_CONNECTION) ?
> +		connector_status_connected : connector_status_disconnected;
> +}
> +
> +static void zx_hdmi_connector_destroy(struct drm_connector *connector)
> +{
> +	drm_connector_unregister(connector);

drm_connector_unregister() is not needed anymore. DRM core will call it
for you.

> +	drm_connector_cleanup(connector);
> +}
> +
> +static const struct drm_connector_funcs zx_hdmi_connector_funcs = {
> +	.dpms = drm_atomic_helper_connector_dpms,
> +	.fill_modes = drm_helper_probe_single_connector_modes,
> +	.detect = zx_hdmi_connector_detect,
> +	.destroy = zx_hdmi_connector_destroy,

Then here you can use drm_connector_cleanup() directly.

> +	.reset = drm_atomic_helper_connector_reset,
> +	.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
> +	.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
> +};
> +
> +static int zx_hdmi_register(struct drm_device *drm, struct zx_hdmi *hdmi)
> +{
> +	struct drm_encoder *encoder = &hdmi->encoder;
> +
> +	encoder->possible_crtcs = VOU_CRTC_MASK;
> +
> +	drm_encoder_init(drm, encoder, &zx_hdmi_encoder_funcs,
> +			 DRM_MODE_ENCODER_TMDS, NULL);
> +	drm_encoder_helper_add(encoder, &zx_hdmi_encoder_helper_funcs);
> +
> +	hdmi->connector.polled = DRM_CONNECTOR_POLL_HPD;
> +
> +	drm_connector_init(drm, &hdmi->connector, &zx_hdmi_connector_funcs,
> +			   DRM_MODE_CONNECTOR_HDMIA);
> +	drm_connector_helper_add(&hdmi->connector,
> +				 &zx_hdmi_connector_helper_funcs);
> +
> +	drm_mode_connector_attach_encoder(&hdmi->connector, encoder);
> +
> +	return 0;
> +}
> +
> +static irqreturn_t zx_hdmi_irq_thread(int irq, void *dev_id)
> +{
> +	struct zx_hdmi *hdmi = dev_id;
> +
> +	drm_helper_hpd_irq_event(hdmi->connector.dev);
> +
> +	return IRQ_HANDLED;
> +}
> +
> +static irqreturn_t zx_hdmi_irq_handler(int irq, void *dev_id)
> +{
> +	struct zx_hdmi *hdmi = dev_id;
> +	u8 lstat;
> +
> +	lstat = hdmi_readb(hdmi, L1_INTR_STAT);
> +
> +	/* Monitor detect/HPD interrupt */
> +	if (lstat & L1_INTR_STAT_INTR1) {
> +		u8 stat;
> +
> +		stat = hdmi_readb(hdmi, INTR1_STAT);
> +		hdmi_writeb(hdmi, INTR1_STAT, stat);
> +
> +		if (stat & INTR1_MONITOR_DETECT)
> +			return IRQ_WAKE_THREAD;
> +	}
> +
> +	return IRQ_NONE;
> +}
> +
> +static int zx_hdmi_i2c_read(struct zx_hdmi *hdmi, struct i2c_msg *msg)
> +{
> +	int len = msg->len;
> +	u8 *buf = msg->buf;
> +	int retry = 0;
> +	int ret = 0;
> +
> +	/* Bits [9:8] of bytes */
> +	hdmi_writeb(hdmi, ZX_DDC_DIN_CNT2, (len >> 8) & 0xff);
> +	/* Bits [7:0] of bytes */
> +	hdmi_writeb(hdmi, ZX_DDC_DIN_CNT1, len & 0xff);
> +
> +	/* Clear FIFO */
> +	hdmi_writeb_mask(hdmi, ZX_DDC_CMD, DDC_CMD_MASK, DDC_CMD_CLEAR_FIFO);
> +
> +	/* Kick off the read */
> +	hdmi_writeb_mask(hdmi, ZX_DDC_CMD, DDC_CMD_MASK,
> +			 DDC_CMD_SEQUENTIAL_READ);
> +
> +	while (len > 0) {
> +		int cnt, i;
> +
> +		/* FIFO needs some time to get ready */
> +		usleep_range(500, 1000);
> +
> +		cnt = hdmi_readb(hdmi, ZX_DDC_DOUT_CNT) & DDC_DOUT_CNT_MASK;
> +		if (cnt == 0) {
> +			if (++retry > 5) {
> +				dev_err(hdmi->dev, "DDC FIFO read timed out!");
> +				ret = -ETIMEDOUT;
> +				break;
> +			}
> +			continue;
> +		}
> +
> +		for (i = 0; i < cnt; i++)
> +			*buf++ = hdmi_readb(hdmi, ZX_DDC_DATA);
> +		len -= cnt;
> +	}
> +
> +	return ret;
> +}
> +
> +static int zx_hdmi_i2c_write(struct zx_hdmi *hdmi, struct i2c_msg *msg)
> +{
> +	/*
> +	 * The DDC I2C adapter is only for reading EDID data, so we assume
> +	 * that the write to this adapter must be the EDID data offset.
> +	 */
> +	if ((msg->len != 1) ||
> +	    ((msg->addr != DDC_ADDR) && (msg->addr != DDC_SEGMENT_ADDR)))
> +		return -EINVAL;
> +
> +	if (msg->addr == DDC_SEGMENT_ADDR)
> +		hdmi_writeb(hdmi, ZX_DDC_SEGM, msg->addr << 1);
> +	else if (msg->addr == DDC_ADDR)
> +		hdmi_writeb(hdmi, ZX_DDC_ADDR, msg->addr << 1);
> +
> +	hdmi_writeb(hdmi, ZX_DDC_OFFSET, msg->buf[0]);
> +
> +	return 0;
> +}
> +
> +static int zx_hdmi_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
> +			    int num)
> +{
> +	struct zx_hdmi *hdmi = i2c_get_adapdata(adap);
> +	struct zx_hdmi_i2c *ddc = hdmi->ddc;
> +	int i, ret = 0;
> +
> +	mutex_lock(&ddc->lock);
> +
> +	/* Enable DDC master access */
> +	hdmi_writeb_mask(hdmi, TPI_DDC_MASTER_EN, HW_DDC_MASTER, HW_DDC_MASTER);
> +
> +	for (i = 0; i < num; i++) {
> +		dev_dbg(hdmi->dev, "xfer: num: %d/%d, len: %d, flags: %#x\n",
> +			i + 1, num, msgs[i].len, msgs[i].flags);
> +
> +		if (msgs[i].flags & I2C_M_RD)
> +			ret = zx_hdmi_i2c_read(hdmi, &msgs[i]);
> +		else
> +			ret = zx_hdmi_i2c_write(hdmi, &msgs[i]);
> +
> +		if (ret < 0)
> +			break;
> +	}
> +
> +	if (!ret)
> +		ret = num;
> +
> +	/* Disable DDC master access */
> +	hdmi_writeb_mask(hdmi, TPI_DDC_MASTER_EN, HW_DDC_MASTER, 0);
> +
> +	mutex_unlock(&ddc->lock);
> +
> +	return ret;
> +}
> +
> +static u32 zx_hdmi_i2c_func(struct i2c_adapter *adapter)
> +{
> +	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
> +}
> +
> +static const struct i2c_algorithm zx_hdmi_algorithm = {
> +	.master_xfer	= zx_hdmi_i2c_xfer,
> +	.functionality	= zx_hdmi_i2c_func,
> +};
> +
> +static int zx_hdmi_ddc_register(struct zx_hdmi *hdmi)
> +{
> +	struct i2c_adapter *adap;
> +	struct zx_hdmi_i2c *ddc;
> +	int ret;
> +
> +	ddc = devm_kzalloc(hdmi->dev, sizeof(*ddc), GFP_KERNEL);
> +	if (!ddc)
> +		return -ENOMEM;
> +
> +	hdmi->ddc = ddc;
> +	mutex_init(&ddc->lock);
> +
> +	adap = &ddc->adap;
> +	adap->owner = THIS_MODULE;
> +	adap->class = I2C_CLASS_DDC;
> +	adap->dev.parent = hdmi->dev;
> +	adap->algo = &zx_hdmi_algorithm;
> +	snprintf(adap->name, sizeof(adap->name), "zx hdmi i2c");
> +
> +	ret = i2c_add_adapter(adap);
> +	if (ret) {
> +		dev_err(hdmi->dev, "failed to add I2C adapter: %d\n", ret);
> +		return ret;
> +	}
> +
> +	i2c_set_adapdata(adap, hdmi);
> +
> +	return 0;
> +}
> +
> +static void zx_hdmi_phy_start(struct zx_hdmi *hdmi)
> +{
> +	/* Copy from ZTE BSP code */
> +	hdmi_writeb(hdmi, 0x222, 0x0);
> +	hdmi_writeb(hdmi, 0x224, 0x4);
> +	hdmi_writeb(hdmi, 0x909, 0x0);
> +	hdmi_writeb(hdmi, 0x7b0, 0x90);
> +	hdmi_writeb(hdmi, 0x7b1, 0x00);
> +	hdmi_writeb(hdmi, 0x7b2, 0xa7);
> +	hdmi_writeb(hdmi, 0x7b8, 0xaa);
> +	hdmi_writeb(hdmi, 0x7b2, 0xa7);
> +	hdmi_writeb(hdmi, 0x7b3, 0x0f);
> +	hdmi_writeb(hdmi, 0x7b4, 0x0f);
> +	hdmi_writeb(hdmi, 0x7b5, 0x55);
> +	hdmi_writeb(hdmi, 0x7b7, 0x03);
> +	hdmi_writeb(hdmi, 0x7b9, 0x12);
> +	hdmi_writeb(hdmi, 0x7ba, 0x32);
> +	hdmi_writeb(hdmi, 0x7bc, 0x68);
> +	hdmi_writeb(hdmi, 0x7be, 0x40);
> +	hdmi_writeb(hdmi, 0x7bf, 0x84);
> +	hdmi_writeb(hdmi, 0x7c1, 0x0f);
> +	hdmi_writeb(hdmi, 0x7c8, 0x02);
> +	hdmi_writeb(hdmi, 0x7c9, 0x03);
> +	hdmi_writeb(hdmi, 0x7ca, 0x40);
> +	hdmi_writeb(hdmi, 0x7dc, 0x31);
> +	hdmi_writeb(hdmi, 0x7e2, 0x04);
> +	hdmi_writeb(hdmi, 0x7e0, 0x06);
> +	hdmi_writeb(hdmi, 0x7cb, 0x68);
> +	hdmi_writeb(hdmi, 0x7f9, 0x02);
> +	hdmi_writeb(hdmi, 0x7b6, 0x02);
> +	hdmi_writeb(hdmi, 0x7f3, 0x0);
> +}
> +
> +static void zx_hdmi_hw_init(struct zx_hdmi *hdmi)
> +{
> +	/* Software reset */
> +	hdmi_writeb(hdmi, PWD_SRST, 1);
> +
> +	/* Enable pclk */
> +	hdmi_writeb_mask(hdmi, CLKPWD, CLKPWD_PDIDCK, CLKPWD_PDIDCK);
> +
> +	/* Enable HDMI for TX */
> +	hdmi_writeb_mask(hdmi, FUNC_SEL, FUNC_HDMI_EN, FUNC_HDMI_EN);
> +
> +	/* Enable deep color packet */
> +	hdmi_writeb_mask(hdmi, P2T_CTRL, P2T_DC_PKT_EN, P2T_DC_PKT_EN);
> +
> +	/* Enable HDMI/MHL mode for output */
> +	hdmi_writeb_mask(hdmi, TEST_TXCTRL, TEST_TXCTRL_HDMI_MODE,
> +			 TEST_TXCTRL_HDMI_MODE);
> +
> +	/* Configure reg_qc_sel */
> +	hdmi_writeb(hdmi, HDMICTL4, 0x3);
> +
> +	/* Enable interrupt */
> +	hdmi_writeb_mask(hdmi, INTR1_MASK, INTR1_MONITOR_DETECT,
> +			 INTR1_MONITOR_DETECT);
> +
> +	/* Clear reset for normal operation */
> +	hdmi_writeb(hdmi, PWD_SRST, 0);
> +
> +	/* Start up phy */
> +	zx_hdmi_phy_start(hdmi);
> +}
> +
> +static int zx_hdmi_bind(struct device *dev, struct device *master, void *data)
> +{
> +	struct platform_device *pdev = to_platform_device(dev);
> +	struct drm_device *drm = data;
> +	struct resource *res;
> +	struct zx_hdmi *hdmi;
> +	int irq;
> +	int ret;
> +
> +	hdmi = devm_kzalloc(dev, sizeof(*hdmi), GFP_KERNEL);
> +	if (!hdmi)
> +		return -ENOMEM;
> +
> +	hdmi->dev = dev;
> +	hdmi->drm = drm;
> +	hdmi->inf = &vou_inf_hdmi;
> +
> +	dev_set_drvdata(dev, hdmi);
> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	hdmi->mmio = devm_ioremap_resource(dev, res);
> +	if (IS_ERR(hdmi->mmio)) {
> +		ret = PTR_ERR(hdmi->mmio);
> +		dev_err(dev, "failed to remap hdmi region: %d\n", ret);
> +		return ret;
> +	}
> +
> +	irq = platform_get_irq(pdev, 0);
> +	if (irq < 0)
> +		return irq;
> +
> +	hdmi->cec_clk = devm_clk_get(hdmi->dev, "osc_cec");
> +	if (IS_ERR(hdmi->cec_clk)) {
> +		ret = PTR_ERR(hdmi->cec_clk);
> +		dev_err(dev, "failed to get cec_clk: %d\n", ret);
> +		return ret;
> +	}
> +
> +	hdmi->osc_clk = devm_clk_get(hdmi->dev, "osc_clk");
> +	if (IS_ERR(hdmi->osc_clk)) {
> +		ret = PTR_ERR(hdmi->osc_clk);
> +		dev_err(dev, "failed to get osc_clk: %d\n", ret);
> +		return ret;
> +	}
> +
> +	hdmi->xclk = devm_clk_get(hdmi->dev, "xclk");
> +	if (IS_ERR(hdmi->xclk)) {
> +		ret = PTR_ERR(hdmi->xclk);
> +		dev_err(dev, "failed to get xclk: %d\n", ret);
> +		return ret;
> +	}
> +
> +	zx_hdmi_hw_init(hdmi);
> +
> +	ret = clk_prepare_enable(hdmi->cec_clk);
> +	if (ret) {
> +		dev_err(dev, "failed to enable cec_clk: %d\n", ret);
> +		return ret;
> +	}
> +
> +	ret = clk_prepare_enable(hdmi->osc_clk);
> +	if (ret) {
> +		dev_err(dev, "failed to enable osc_clk: %d\n", ret);
> +		goto disable_cec_clk;
> +	}
> +
> +	ret = clk_prepare_enable(hdmi->xclk);
> +	if (ret) {
> +		dev_err(dev, "failed to enable xclk: %d\n", ret);
> +		goto disable_osc_clk;
> +	}
> +
> +
> +	ret = zx_hdmi_ddc_register(hdmi);
> +	if (ret) {
> +		dev_err(dev, "failed to register ddc: %d\n", ret);
> +		goto disable_xclk;
> +	}
> +
> +	ret = zx_hdmi_register(drm, hdmi);
> +	if (ret) {
> +		dev_err(dev, "failed to register hdmi: %d\n", ret);
> +		goto disable_xclk;
> +	}
> +
> +	ret = devm_request_threaded_irq(dev, irq, zx_hdmi_irq_handler,
> +					zx_hdmi_irq_thread, IRQF_SHARED,
> +					dev_name(dev), hdmi);
> +	if (ret) {
> +		dev_err(dev, "failed to request threaded irq: %d\n", ret);
> +		goto disable_xclk;
> +	}
> +
> +	return 0;
> +
> +disable_xclk:
> +	clk_disable_unprepare(hdmi->xclk);
> +disable_osc_clk:
> +	clk_disable_unprepare(hdmi->osc_clk);
> +disable_cec_clk:
> +	clk_disable_unprepare(hdmi->cec_clk);
> +	return ret;
> +}
> +
> +static void zx_hdmi_unbind(struct device *dev, struct device *master,
> +			   void *data)
> +{
> +	struct zx_hdmi *hdmi = dev_get_drvdata(dev);
> +
> +	clk_disable_unprepare(hdmi->xclk);
> +	clk_disable_unprepare(hdmi->osc_clk);
> +	clk_disable_unprepare(hdmi->cec_clk);
> +}
> +
> +static const struct component_ops zx_hdmi_component_ops = {
> +	.bind = zx_hdmi_bind,
> +	.unbind = zx_hdmi_unbind,
> +};
> +
> +static int zx_hdmi_probe(struct platform_device *pdev)
> +{
> +	return component_add(&pdev->dev, &zx_hdmi_component_ops);
> +}
> +
> +static int zx_hdmi_remove(struct platform_device *pdev)
> +{
> +	component_del(&pdev->dev, &zx_hdmi_component_ops);
> +	return 0;
> +}
> +
> +static const struct of_device_id zx_hdmi_of_match[] = {
> +	{ .compatible = "zte,zx296718-hdmi", },
> +	{ /* end */ },
> +};
> +MODULE_DEVICE_TABLE(of, zx_hdmi_of_match);
> +
> +struct platform_driver zx_hdmi_driver = {
> +	.probe = zx_hdmi_probe,
> +	.remove = zx_hdmi_remove,
> +	.driver	= {
> +		.name = "zx-hdmi",
> +		.of_match_table	= zx_hdmi_of_match,
> +	},
> +};
> diff --git a/drivers/gpu/drm/zte/zx_plane.c b/drivers/gpu/drm/zte/zx_plane.c
> new file mode 100644
> index 000000000000..fdab1715bee5
> --- /dev/null
> +++ b/drivers/gpu/drm/zte/zx_plane.c
> @@ -0,0 +1,375 @@
> +/*
> + * Copyright 2016 Linaro Ltd.
> + * Copyright 2016 ZTE Corporation.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + */
> +
> +#include <drm/drm_atomic.h>
> +#include <drm/drm_atomic_helper.h>
> +#include <drm/drm_fb_cma_helper.h>
> +#include <drm/drm_gem_cma_helper.h>
> +#include <drm/drm_modeset_helper_vtables.h>
> +#include <drm/drm_plane_helper.h>
> +#include <drm/drmP.h>
> +
> +#include "zx_drm_drv.h"
> +#include "zx_plane.h"
> +#include "zx_vou.h"
> +
> +/* GL registers */
> +#define GL_CTRL0			0x00
> +#define GL_UPDATE			BIT(5)
> +#define GL_CTRL1			0x04
> +#define GL_DATA_FMT_SHIFT		0
> +#define GL_DATA_FMT_MASK		(0xf << GL_DATA_FMT_SHIFT)
> +#define GL_FMT_ARGB8888			0
> +#define GL_FMT_RGB888			1
> +#define GL_FMT_RGB565			2
> +#define GL_FMT_ARGB1555			3
> +#define GL_FMT_ARGB4444			4
> +#define GL_CTRL2			0x08
> +#define GL_GLOBAL_ALPHA_SHIFT		8
> +#define GL_GLOBAL_ALPHA_MASK		(0xff << GL_GLOBAL_ALPHA_SHIFT)
> +#define GL_CTRL3			0x0c
> +#define GL_SCALER_BYPASS_MODE		BIT(0)
> +#define GL_STRIDE			0x18
> +#define GL_ADDR				0x1c
> +#define GL_SRC_SIZE			0x38
> +#define GL_SRC_W_SHIFT			16
> +#define GL_SRC_W_MASK			(0x3fff << GL_SRC_W_SHIFT)
> +#define GL_SRC_H_SHIFT			0
> +#define GL_SRC_H_MASK			(0x3fff << GL_SRC_H_SHIFT)
> +#define GL_POS_START			0x9c
> +#define GL_POS_END			0xa0
> +#define GL_POS_X_SHIFT			16
> +#define GL_POS_X_MASK			(0x1fff << GL_POS_X_SHIFT)
> +#define GL_POS_Y_SHIFT			0
> +#define GL_POS_Y_MASK			(0x1fff << GL_POS_Y_SHIFT)
> +
> +#define GL_SRC_W(x)	(((x) << GL_SRC_W_SHIFT) & GL_SRC_W_MASK)
> +#define GL_SRC_H(x)	(((x) << GL_SRC_H_SHIFT) & GL_SRC_H_MASK)
> +#define GL_POS_X(x)	(((x) << GL_POS_X_SHIFT) & GL_POS_X_MASK)
> +#define GL_POS_Y(x)	(((x) << GL_POS_Y_SHIFT) & GL_POS_Y_MASK)
> +
> +/* CSC registers */
> +#define CSC_CTRL0			0x30
> +#define CSC_COV_MODE_SHIFT		16
> +#define CSC_COV_MODE_MASK		(0xffff << CSC_COV_MODE_SHIFT)
> +#define CSC_BT601_IMAGE_RGB2YCBCR	0
> +#define CSC_BT601_IMAGE_YCBCR2RGB	1
> +#define CSC_BT601_VIDEO_RGB2YCBCR	2
> +#define CSC_BT601_VIDEO_YCBCR2RGB	3
> +#define CSC_BT709_IMAGE_RGB2YCBCR	4
> +#define CSC_BT709_IMAGE_YCBCR2RGB	5
> +#define CSC_BT709_VIDEO_RGB2YCBCR	6
> +#define CSC_BT709_VIDEO_YCBCR2RGB	7
> +#define CSC_BT2020_IMAGE_RGB2YCBCR	8
> +#define CSC_BT2020_IMAGE_YCBCR2RGB	9
> +#define CSC_BT2020_VIDEO_RGB2YCBCR	10
> +#define CSC_BT2020_VIDEO_YCBCR2RGB	11
> +#define CSC_WORK_ENABLE			BIT(0)
> +
> +/* RSZ registers */
> +#define RSZ_SRC_CFG			0x00
> +#define RSZ_DEST_CFG			0x04
> +#define RSZ_ENABLE_CFG			0x14
> +
> +#define RSZ_VER_SHIFT			16
> +#define RSZ_VER_MASK			(0xffff << RSZ_VER_SHIFT)
> +#define RSZ_HOR_SHIFT			0
> +#define RSZ_HOR_MASK			(0xffff << RSZ_HOR_SHIFT)
> +
> +#define RSZ_VER(x)	(((x) << RSZ_VER_SHIFT) & RSZ_VER_MASK)
> +#define RSZ_HOR(x)	(((x) << RSZ_HOR_SHIFT) & RSZ_HOR_MASK)
> +
> +/* HBSC registers */
> +#define HBSC_SATURATION			0x00
> +#define HBSC_HUE			0x04
> +#define HBSC_BRIGHT			0x08
> +#define HBSC_CONTRAST			0x0c
> +#define HBSC_THRESHOLD_COL1		0x10
> +#define HBSC_THRESHOLD_COL2		0x14
> +#define HBSC_THRESHOLD_COL3		0x18
> +#define HBSC_CTRL0			0x28
> +#define HBSC_CTRL_EN			BIT(2)
> +
> +struct zx_plane {
> +	struct drm_plane plane;
> +	void __iomem *layer;
> +	void __iomem *csc;
> +	void __iomem *hbsc;
> +	void __iomem *rsz;
> +};
> +
> +#define to_zx_plane(plane)	container_of(plane, struct zx_plane, plane)
> +
> +static const uint32_t gl_formats[] = {
> +	DRM_FORMAT_ARGB8888,
> +	DRM_FORMAT_XRGB8888,
> +	DRM_FORMAT_RGB888,
> +	DRM_FORMAT_RGB565,
> +	DRM_FORMAT_ARGB1555,
> +	DRM_FORMAT_ARGB4444,
> +};
> +
> +static int zx_gl_plane_atomic_check(struct drm_plane *plane,
> +				    struct drm_plane_state *plane_state)
> +{
> +	struct drm_framebuffer *fb = plane_state->fb;
> +	struct drm_crtc *crtc = plane_state->crtc;
> +	struct drm_crtc_state *crtc_state;
> +	struct drm_rect clip;
> +
> +	if (!crtc || !fb)
> +		return 0;
> +
> +	crtc_state = drm_atomic_get_existing_crtc_state(plane_state->state,
> +							crtc);
> +	if (WARN_ON(!crtc_state))
> +		return -EINVAL;
> +
> +	/* plane must match crtc enable state */
> +	if (crtc_state->enable != !!plane_state->crtc)
> +		return -EINVAL;
> +
> +	/* nothing to check when disabling or disabled */
> +	if (!crtc_state->enable)
> +		return 0;
> +
> +	clip.x1 = 0;
> +	clip.y1 = 0;
> +	clip.x2 = crtc_state->adjusted_mode.hdisplay;
> +	clip.y2 = crtc_state->adjusted_mode.vdisplay;
> +
> +	return drm_plane_helper_check_state(plane_state, &clip,
> +					    DRM_PLANE_HELPER_NO_SCALING,
> +					    DRM_PLANE_HELPER_NO_SCALING,
> +					    false, true);
> +}
> +
> +static int zx_gl_get_fmt(uint32_t format)
> +{
> +	switch (format) {
> +	case DRM_FORMAT_ARGB8888:
> +	case DRM_FORMAT_XRGB8888:
> +		return GL_FMT_ARGB8888;
> +	case DRM_FORMAT_RGB888:
> +		return GL_FMT_RGB888;
> +	case DRM_FORMAT_RGB565:
> +		return GL_FMT_RGB565;
> +	case DRM_FORMAT_ARGB1555:
> +		return GL_FMT_ARGB1555;
> +	case DRM_FORMAT_ARGB4444:
> +		return GL_FMT_ARGB4444;
> +	default:
> +		WARN_ONCE(1, "invalid pixel format %d\n", format);
> +		return -EINVAL;
> +	}
> +}
> +
> +static inline void zx_gl_set_update(struct zx_plane *zplane)
> +{
> +	void __iomem *layer = zplane->layer;
> +
> +	zx_writel_mask(layer + GL_CTRL0, GL_UPDATE, GL_UPDATE);
> +}
> +
> +static inline void zx_gl_rsz_set_update(struct zx_plane *zplane)
> +{
> +	zx_writel(zplane->rsz + RSZ_ENABLE_CFG, 1);
> +}
> +
> +void zx_plane_set_update(struct drm_plane *plane)
> +{
> +	struct zx_plane *zplane = to_zx_plane(plane);
> +
> +	zx_gl_rsz_set_update(zplane);
> +	zx_gl_set_update(zplane);
> +}
> +
> +static void zx_gl_rsz_setup(struct zx_plane *zplane, u32 src_w, u32 src_h,
> +			    u32 dst_w, u32 dst_h)
> +{
> +	void __iomem *rsz = zplane->rsz;
> +
> +	zx_writel(rsz + RSZ_SRC_CFG, RSZ_VER(src_h - 1) | RSZ_HOR(src_w - 1));
> +	zx_writel(rsz + RSZ_DEST_CFG, RSZ_VER(dst_h - 1) | RSZ_HOR(dst_w - 1));
> +
> +	zx_gl_rsz_set_update(zplane);
> +}
> +
> +static void zx_gl_plane_atomic_update(struct drm_plane *plane,
> +				      struct drm_plane_state *old_state)
> +{
> +	struct zx_plane *zplane = to_zx_plane(plane);
> +	struct drm_framebuffer *fb = plane->state->fb;
> +	struct drm_gem_cma_object *cma_obj;
> +	void __iomem *layer = zplane->layer;
> +	void __iomem *csc = zplane->csc;
> +	void __iomem *hbsc = zplane->hbsc;
> +	u32 src_x, src_y, src_w, src_h;
> +	u32 dst_x, dst_y, dst_w, dst_h;
> +	unsigned int depth, bpp;
> +	uint32_t format;
> +	dma_addr_t paddr;
> +	u32 stride;
> +	int fmt;
> +
> +	if (!fb)
> +		return;
> +
> +	format = fb->pixel_format;
> +	stride = fb->pitches[0];
> +
> +	src_x = plane->state->src_x >> 16;
> +	src_y = plane->state->src_y >> 16;
> +	src_w = plane->state->src_w >> 16;
> +	src_h = plane->state->src_h >> 16;
> +
> +	dst_x = plane->state->crtc_x;
> +	dst_y = plane->state->crtc_y;
> +	dst_w = plane->state->crtc_w;
> +	dst_h = plane->state->crtc_h;
> +
> +	drm_fb_get_bpp_depth(format, &depth, &bpp);
> +
> +	cma_obj = drm_fb_cma_get_gem_obj(fb, 0);
> +	paddr = cma_obj->paddr + fb->offsets[0];
> +	paddr += src_y * stride + src_x * bpp / 8;
> +	zx_writel(layer + GL_ADDR, paddr);
> +
> +	/* Set up source height/width register */
> +	zx_writel(layer + GL_SRC_SIZE, GL_SRC_W(src_w) | GL_SRC_H(src_h));
> +
> +	/* Set up start position register */
> +	zx_writel(layer + GL_POS_START, GL_POS_X(dst_x) | GL_POS_Y(dst_y));
> +
> +	/* Set up end position register */
> +	zx_writel(layer + GL_POS_END,
> +		  GL_POS_X(dst_x + dst_w) | GL_POS_Y(dst_y + dst_h));
> +
> +	/* Set up stride register */
> +	zx_writel(layer + GL_STRIDE, stride & 0xffff);
> +
> +	/* Set up graphic layer data format */
> +	fmt = zx_gl_get_fmt(format);
> +	if (fmt >= 0)
> +		zx_writel_mask(layer + GL_CTRL1, GL_DATA_FMT_MASK,
> +			       fmt << GL_DATA_FMT_SHIFT);
> +
> +	/* Initialize global alpha with a sane value */
> +	zx_writel_mask(layer + GL_CTRL2, GL_GLOBAL_ALPHA_MASK,
> +		       0xff << GL_GLOBAL_ALPHA_SHIFT);
> +
> +	/* Setup CSC for the GL */
> +	if (dst_h > 720)
> +		zx_writel_mask(csc + CSC_CTRL0, CSC_COV_MODE_MASK,
> +			       CSC_BT709_IMAGE_RGB2YCBCR << CSC_COV_MODE_SHIFT);
> +	else
> +		zx_writel_mask(csc + CSC_CTRL0, CSC_COV_MODE_MASK,
> +			       CSC_BT601_IMAGE_RGB2YCBCR << CSC_COV_MODE_SHIFT);
> +	zx_writel_mask(csc + CSC_CTRL0, CSC_WORK_ENABLE, CSC_WORK_ENABLE);
> +
> +	/* Always use scaler since it exists (set for not bypass) */
> +	zx_writel_mask(layer + GL_CTRL3, GL_SCALER_BYPASS_MODE,
> +		       GL_SCALER_BYPASS_MODE);
> +
> +	zx_gl_rsz_setup(zplane, src_w, src_h, dst_w, dst_h);
> +
> +	/* Enable HBSC block */
> +	zx_writel_mask(hbsc + HBSC_CTRL0, HBSC_CTRL_EN, HBSC_CTRL_EN);
> +
> +	zx_gl_set_update(zplane);
> +}
> +
> +static const struct drm_plane_helper_funcs zx_gl_plane_helper_funcs = {
> +	.atomic_check = zx_gl_plane_atomic_check,
> +	.atomic_update = zx_gl_plane_atomic_update,
> +};
> +
> +static void zx_plane_destroy(struct drm_plane *plane)
> +{
> +	drm_plane_helper_disable(plane);
> +	drm_plane_cleanup(plane);
> +}
> +
> +static const struct drm_plane_funcs zx_plane_funcs = {
> +	.update_plane = drm_atomic_helper_update_plane,
> +	.disable_plane = drm_atomic_helper_disable_plane,
> +	.destroy = zx_plane_destroy,
> +	.reset = drm_atomic_helper_plane_reset,
> +	.atomic_duplicate_state = drm_atomic_helper_plane_duplicate_state,
> +	.atomic_destroy_state = drm_atomic_helper_plane_destroy_state,
> +};
> +
> +static void zx_plane_hbsc_init(struct zx_plane *zplane)
> +{
> +	void __iomem *hbsc = zplane->hbsc;
> +
> +	/*
> +	 *  Initialize HBSC block with a sane configuration per recommedation
> +	 *  from ZTE BSP code.
> +	 */
> +	zx_writel(hbsc + HBSC_SATURATION, 0x200);
> +	zx_writel(hbsc + HBSC_HUE, 0x0);
> +	zx_writel(hbsc + HBSC_BRIGHT, 0x0);
> +	zx_writel(hbsc + HBSC_CONTRAST, 0x200);
> +
> +	zx_writel(hbsc + HBSC_THRESHOLD_COL1, (0x3ac << 16) | 0x40);
> +	zx_writel(hbsc + HBSC_THRESHOLD_COL2, (0x3c0 << 16) | 0x40);
> +	zx_writel(hbsc + HBSC_THRESHOLD_COL3, (0x3c0 << 16) | 0x40);
> +}
> +
> +struct drm_plane *zx_plane_init(struct drm_device *drm, struct device *dev,
> +				struct zx_layer_data *data,
> +				enum drm_plane_type type)
> +{
> +	const struct drm_plane_helper_funcs *helper;
> +	struct zx_plane *zplane;
> +	struct drm_plane *plane;
> +	const uint32_t *formats;
> +	unsigned int format_count;
> +	int ret;
> +
> +	zplane = devm_kzalloc(dev, sizeof(*zplane), GFP_KERNEL);
> +	if (!zplane)
> +		return ERR_PTR(-ENOMEM);
> +
> +	plane = &zplane->plane;
> +
> +	zplane->layer = data->layer;
> +	zplane->hbsc = data->hbsc;
> +	zplane->csc = data->csc;
> +	zplane->rsz = data->rsz;
> +
> +	zx_plane_hbsc_init(zplane);
> +
> +	switch (type) {
> +	case DRM_PLANE_TYPE_PRIMARY:
> +		helper = &zx_gl_plane_helper_funcs;
> +		formats = gl_formats;
> +		format_count = ARRAY_SIZE(gl_formats);
> +		break;
> +	case DRM_PLANE_TYPE_OVERLAY:
> +		/* TODO: add video layer (vl) support */
> +		break;
> +	default:
> +		return ERR_PTR(-ENODEV);
> +	}
> +
> +	ret = drm_universal_plane_init(drm, plane, VOU_CRTC_MASK,
> +				       &zx_plane_funcs, formats, format_count,
> +				       type, NULL);
> +	if (ret) {
> +		dev_err(dev, "failed to init universal plane: %d\n", ret);
> +		return ERR_PTR(ret);
> +	}
> +
> +	drm_plane_helper_add(plane, helper);
> +
> +	return plane;
> +}
> diff --git a/drivers/gpu/drm/zte/zx_plane.h b/drivers/gpu/drm/zte/zx_plane.h
> new file mode 100644
> index 000000000000..2b82cd558d9d
> --- /dev/null
> +++ b/drivers/gpu/drm/zte/zx_plane.h
> @@ -0,0 +1,26 @@
> +/*
> + * Copyright 2016 Linaro Ltd.
> + * Copyright 2016 ZTE Corporation.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + */
> +
> +#ifndef __ZX_PLANE_H__
> +#define __ZX_PLANE_H__
> +
> +struct zx_layer_data {
> +	void __iomem *layer;
> +	void __iomem *csc;
> +	void __iomem *hbsc;
> +	void __iomem *rsz;
> +};
> +
> +struct drm_plane *zx_plane_init(struct drm_device *drm, struct device *dev,
> +				struct zx_layer_data *data,
> +				enum drm_plane_type type);
> +void zx_plane_set_update(struct drm_plane *plane);
> +
> +#endif /* __ZX_PLANE_H__ */
> diff --git a/drivers/gpu/drm/zte/zx_vou.c b/drivers/gpu/drm/zte/zx_vou.c
> new file mode 100644
> index 000000000000..676c750d6009
> --- /dev/null
> +++ b/drivers/gpu/drm/zte/zx_vou.c
> @@ -0,0 +1,799 @@
> +/*
> + * Copyright 2016 Linaro Ltd.
> + * Copyright 2016 ZTE Corporation.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/component.h>
> +#include <linux/of_address.h>
> +#include <video/videomode.h>
> +
> +#include <drm/drm_atomic_helper.h>
> +#include <drm/drm_crtc.h>
> +#include <drm/drm_crtc_helper.h>
> +#include <drm/drm_fb_cma_helper.h>
> +#include <drm/drm_fb_helper.h>
> +#include <drm/drm_gem_cma_helper.h>
> +#include <drm/drm_of.h>
> +#include <drm/drm_plane_helper.h>
> +#include <drm/drmP.h>
> +
> +#include "zx_drm_drv.h"
> +#include "zx_plane.h"
> +#include "zx_vou.h"
> +
> +/* Sub-module offset */
> +#define MAIN_GL_OFFSET			0x130
> +#define MAIN_CSC_OFFSET			0x580
> +#define MAIN_HBSC_OFFSET		0x820
> +#define MAIN_RSZ_OFFSET			0x600 /* OTFPPU sub-module */
> +
> +#define AUX_GL_OFFSET			0x200
> +#define AUX_CSC_OFFSET			0x5d0
> +#define AUX_HBSC_OFFSET			0x860
> +#define AUX_RSZ_OFFSET			0x800
> +
> +/* OSD (GPC_GLOBAL) registers */
> +#define OSD_INT_STA			0x04
> +#define OSD_INT_CLRSTA			0x08
> +#define OSD_INT_MSK			0x0c
> +#define OSD_INT_AUX_UPT			BIT(14)
> +#define OSD_INT_MAIN_UPT		BIT(13)
> +#define OSD_INT_GL1_LBW			BIT(10)
> +#define OSD_INT_GL0_LBW			BIT(9)
> +#define OSD_INT_VL2_LBW			BIT(8)
> +#define OSD_INT_VL1_LBW			BIT(7)
> +#define OSD_INT_VL0_LBW			BIT(6)
> +#define OSD_INT_BUS_ERR			BIT(3)
> +#define OSD_INT_CFG_ERR			BIT(2)
> +#define OSD_INT_ERROR (\
> +	OSD_INT_GL1_LBW | OSD_INT_GL0_LBW | \
> +	OSD_INT_VL2_LBW | OSD_INT_VL1_LBW | OSD_INT_VL0_LBW | \
> +	OSD_INT_BUS_ERR | OSD_INT_CFG_ERR \
> +)
> +#define OSD_INT_ENABLE (OSD_INT_ERROR | OSD_INT_AUX_UPT | OSD_INT_MAIN_UPT)
> +#define OSD_CTRL0			0x10
> +#define OSD_CTRL0_GL0_EN		BIT(7)
> +#define OSD_CTRL0_GL0_SEL		BIT(6)
> +#define OSD_CTRL0_GL1_EN		BIT(5)
> +#define OSD_CTRL0_GL1_SEL		BIT(4)
> +#define OSD_RST_CLR			0x1c
> +#define RST_PER_FRAME			BIT(19)
> +
> +/* Main/Aux channel registers */
> +#define OSD_MAIN_CHN			0x470
> +#define OSD_AUX_CHN			0x4d0
> +#define CHN_CTRL0			0x00
> +#define CHN_ENABLE			BIT(0)
> +#define CHN_CTRL1			0x04
> +#define CHN_SCREEN_W_SHIFT		18
> +#define CHN_SCREEN_W_MASK		(0x1fff << CHN_SCREEN_W_SHIFT)
> +#define CHN_SCREEN_H_SHIFT		5
> +#define CHN_SCREEN_H_MASK		(0x1fff << CHN_SCREEN_H_SHIFT)
> +#define CHN_UPDATE			0x08
> +
> +/* TIMING_CTRL registers */
> +#define TIMING_TC_ENABLE		0x04
> +#define AUX_TC_EN			BIT(1)
> +#define MAIN_TC_EN			BIT(0)
> +#define FIR_MAIN_ACTIVE			0x08
> +#define FIR_AUX_ACTIVE			0x0c
> +#define V_ACTIVE_SHIFT			16
> +#define V_ACTIVE_MASK			(0xffff << V_ACTIVE_SHIFT)
> +#define H_ACTIVE_SHIFT			0
> +#define H_ACTIVE_MASK			(0xffff << H_ACTIVE_SHIFT)
> +#define FIR_MAIN_H_TIMING		0x10
> +#define FIR_MAIN_V_TIMING		0x14
> +#define FIR_AUX_H_TIMING		0x18
> +#define FIR_AUX_V_TIMING		0x1c
> +#define SYNC_WIDE_SHIFT			22
> +#define SYNC_WIDE_MASK			(0x3ff << SYNC_WIDE_SHIFT)
> +#define BACK_PORCH_SHIFT		11
> +#define BACK_PORCH_MASK			(0x7ff << BACK_PORCH_SHIFT)
> +#define FRONT_PORCH_SHIFT		0
> +#define FRONT_PORCH_MASK		(0x7ff << FRONT_PORCH_SHIFT)
> +#define TIMING_CTRL			0x20
> +#define AUX_POL_SHIFT			3
> +#define AUX_POL_MASK			(0x7 << AUX_POL_SHIFT)
> +#define MAIN_POL_SHIFT			0
> +#define MAIN_POL_MASK			(0x7 << MAIN_POL_SHIFT)
> +#define POL_DE_SHIFT			2
> +#define POL_VSYNC_SHIFT			1
> +#define POL_HSYNC_SHIFT			0
> +#define TIMING_INT_CTRL			0x24
> +#define TIMING_INT_STATE		0x28
> +#define TIMING_INT_AUX_FRAME		BIT(3)
> +#define TIMING_INT_MAIN_FRAME		BIT(1)
> +#define TIMING_INT_AUX_FRAME_SEL_VSW	(0x2 << 10)
> +#define TIMING_INT_MAIN_FRAME_SEL_VSW	(0x2 << 6)
> +#define TIMING_INT_ENABLE (\
> +	TIMING_INT_MAIN_FRAME_SEL_VSW | TIMING_INT_AUX_FRAME_SEL_VSW | \
> +	TIMING_INT_MAIN_FRAME | TIMING_INT_AUX_FRAME \
> +)
> +#define TIMING_MAIN_SHIFT		0x2c
> +#define TIMING_AUX_SHIFT		0x30
> +#define H_SHIFT_VAL			0x0048
> +#define TIMING_MAIN_PI_SHIFT		0x68
> +#define TIMING_AUX_PI_SHIFT		0x6c
> +#define H_PI_SHIFT_VAL			0x000f
> +
> +#define V_ACTIVE(x)	(((x) << V_ACTIVE_SHIFT) & V_ACTIVE_MASK)
> +#define H_ACTIVE(x)	(((x) << H_ACTIVE_SHIFT) & H_ACTIVE_MASK)
> +
> +#define SYNC_WIDE(x)	(((x) << SYNC_WIDE_SHIFT) & SYNC_WIDE_MASK)
> +#define BACK_PORCH(x)	(((x) << BACK_PORCH_SHIFT) & BACK_PORCH_MASK)
> +#define FRONT_PORCH(x)	(((x) << FRONT_PORCH_SHIFT) & FRONT_PORCH_MASK)
> +
> +/* DTRC registers */
> +#define DTRC_F0_CTRL			0x2c
> +#define DTRC_F1_CTRL			0x5c
> +#define DTRC_DECOMPRESS_BYPASS		BIT(17)
> +#define DTRC_DETILE_CTRL		0x68
> +#define TILE2RASTESCAN_BYPASS_MODE	BIT(30)
> +#define DETILE_ARIDR_MODE_MASK		(0x3 << 0)
> +#define DETILE_ARID_ALL			0
> +#define DETILE_ARID_IN_ARIDR		1
> +#define DETILE_ARID_BYP_BUT_ARIDR	2
> +#define DETILE_ARID_IN_ARIDR2		3
> +#define DTRC_ARID			0x6c
> +#define DTRC_ARID3_SHIFT		24
> +#define DTRC_ARID3_MASK			(0xff << DTRC_ARID3_SHIFT)
> +#define DTRC_ARID2_SHIFT		16
> +#define DTRC_ARID2_MASK			(0xff << DTRC_ARID2_SHIFT)
> +#define DTRC_ARID1_SHIFT		8
> +#define DTRC_ARID1_MASK			(0xff << DTRC_ARID1_SHIFT)
> +#define DTRC_ARID0_SHIFT		0
> +#define DTRC_ARID0_MASK			(0xff << DTRC_ARID0_SHIFT)
> +#define DTRC_DEC2DDR_ARID		0x70
> +
> +#define DTRC_ARID3(x)	(((x) << DTRC_ARID3_SHIFT) & DTRC_ARID3_MASK)
> +#define DTRC_ARID2(x)	(((x) << DTRC_ARID2_SHIFT) & DTRC_ARID2_MASK)
> +#define DTRC_ARID1(x)	(((x) << DTRC_ARID1_SHIFT) & DTRC_ARID1_MASK)
> +#define DTRC_ARID0(x)	(((x) << DTRC_ARID0_SHIFT) & DTRC_ARID0_MASK)
> +
> +/* VOU_CTRL registers */
> +#define VOU_INF_EN			0x00
> +#define VOU_INF_CH_SEL			0x04
> +#define VOU_INF_DATA_SEL		0x08
> +#define VOU_SOFT_RST			0x14
> +#define VOU_CLK_SEL			0x18
> +#define VOU_CLK_GL1_SEL			BIT(5)
> +#define VOU_CLK_GL0_SEL			BIT(4)
> +#define VOU_CLK_REQEN			0x20
> +#define VOU_CLK_EN			0x24
> +
> +/* OTFPPU_CTRL registers */
> +#define OTFPPU_RSZ_DATA_SOURCE		0x04
> +
> +#define GL_NUM				2
> +#define VL_NUM				3
> +
> +enum vou_chn_type {
> +	VOU_CHN_MAIN,
> +	VOU_CHN_AUX,
> +};
> +
> +struct zx_crtc_regs {
> +	u32 fir_active;
> +	u32 fir_htiming;
> +	u32 fir_vtiming;
> +	u32 timing_shift;
> +	u32 timing_pi_shift;
> +};
> +
> +static const struct zx_crtc_regs main_crtc_regs = {
> +	.fir_active = FIR_MAIN_ACTIVE,
> +	.fir_htiming = FIR_MAIN_H_TIMING,
> +	.fir_vtiming = FIR_MAIN_V_TIMING,
> +	.timing_shift = TIMING_MAIN_SHIFT,
> +	.timing_pi_shift = TIMING_MAIN_PI_SHIFT,
> +};
> +
> +static const struct zx_crtc_regs aux_crtc_regs = {
> +	.fir_active = FIR_AUX_ACTIVE,
> +	.fir_htiming = FIR_AUX_H_TIMING,
> +	.fir_vtiming = FIR_AUX_V_TIMING,
> +	.timing_shift = TIMING_AUX_SHIFT,
> +	.timing_pi_shift = TIMING_AUX_PI_SHIFT,
> +};
> +
> +struct zx_crtc_bits {
> +	u32 polarity_mask;
> +	u32 polarity_shift;
> +	u32 tc_enable;
> +	u32 gl_enable;
> +};
> +
> +static const struct zx_crtc_bits main_crtc_bits = {
> +	.polarity_mask = MAIN_POL_MASK,
> +	.polarity_shift = MAIN_POL_SHIFT,
> +	.tc_enable = MAIN_TC_EN,
> +	.gl_enable = OSD_CTRL0_GL0_EN,
> +};
> +
> +static const struct zx_crtc_bits aux_crtc_bits = {
> +	.polarity_mask = AUX_POL_MASK,
> +	.polarity_shift = AUX_POL_SHIFT,
> +	.tc_enable = AUX_TC_EN,
> +	.gl_enable = OSD_CTRL0_GL1_EN,
> +};
> +
> +struct zx_crtc {
> +	struct drm_crtc crtc;
> +	struct drm_plane *primary;
> +	struct zx_vou_hw *vou;
> +	void __iomem *chnreg;
> +	const struct zx_crtc_regs *regs;
> +	const struct zx_crtc_bits *bits;
> +	enum vou_chn_type chn_type;
> +	struct clk *pixclk;
> +};
> +
> +#define to_zx_crtc(x) container_of(x, struct zx_crtc, crtc)
> +
> +struct zx_vou_hw {
> +	struct device *dev;
> +	void __iomem *osd;
> +	void __iomem *timing;
> +	void __iomem *vouctl;
> +	void __iomem *otfppu;
> +	void __iomem *dtrc;
> +	struct clk *axi_clk;
> +	struct clk *ppu_clk;
> +	struct clk *main_clk;
> +	struct clk *aux_clk;
> +	struct zx_crtc *main_crtc;
> +	struct zx_crtc *aux_crtc;
> +};
> +
> +static inline struct zx_vou_hw *crtc_to_vou(struct drm_crtc *crtc)
> +{
> +	struct zx_crtc *zcrtc = to_zx_crtc(crtc);
> +
> +	return zcrtc->vou;
> +}
> +
> +void vou_inf_enable(const struct vou_inf *inf, struct drm_crtc *crtc)
> +{
> +	struct zx_crtc *zcrtc = to_zx_crtc(crtc);
> +	struct zx_vou_hw *vou = zcrtc->vou;
> +	bool is_main = zcrtc->chn_type == VOU_CHN_MAIN;
> +	u32 data_sel_shift = inf->id << 1;
> +
> +	/* Select data format */
> +	zx_writel_mask(vou->vouctl + VOU_INF_DATA_SEL, 0x3 << data_sel_shift,
> +		       inf->data_sel << data_sel_shift);
> +
> +	/* Select channel */
> +	zx_writel_mask(vou->vouctl + VOU_INF_CH_SEL, 0x1 << inf->id,
> +		       zcrtc->chn_type << inf->id);
> +
> +	/* Select interface clocks */
> +	zx_writel_mask(vou->vouctl + VOU_CLK_SEL, inf->clocks_sel_bits,
> +		       is_main ? 0 : inf->clocks_sel_bits);
> +
> +	/* Enable interface clocks */
> +	zx_writel_mask(vou->vouctl + VOU_CLK_EN, inf->clocks_en_bits,
> +		       inf->clocks_en_bits);
> +
> +	/* Enable the device */
> +	zx_writel_mask(vou->vouctl + VOU_INF_EN, 1 << inf->id, 1 << inf->id);
> +}
> +
> +void vou_inf_disable(const struct vou_inf *inf, struct drm_crtc *crtc)
> +{
> +	struct zx_vou_hw *vou = crtc_to_vou(crtc);
> +
> +	/* Disable the device */
> +	zx_writel_mask(vou->vouctl + VOU_INF_EN, 1 << inf->id, 0);
> +
> +	/* Disable interface clocks */
> +	zx_writel_mask(vou->vouctl + VOU_CLK_EN, inf->clocks_en_bits, 0);
> +}
> +
> +static inline void vou_chn_set_update(struct zx_crtc *zcrtc)
> +{
> +	zx_writel(zcrtc->chnreg + CHN_UPDATE, 1);
> +}
> +
> +static void zx_crtc_enable(struct drm_crtc *crtc)
> +{
> +	struct drm_display_mode *mode = &crtc->state->adjusted_mode;
> +	struct zx_crtc *zcrtc = to_zx_crtc(crtc);
> +	struct zx_vou_hw *vou = zcrtc->vou;
> +	const struct zx_crtc_regs *regs = zcrtc->regs;
> +	const struct zx_crtc_bits *bits = zcrtc->bits;
> +	struct videomode vm;
> +	u32 pol = 0;
> +	u32 val;
> +	int ret;
> +
> +	drm_display_mode_to_videomode(mode, &vm);
> +
> +	/* Set up timing parameters */
> +	val = V_ACTIVE(vm.vactive - 1);
> +	val |= H_ACTIVE(vm.hactive - 1);
> +	zx_writel(vou->timing + regs->fir_active, val);
> +
> +	val = SYNC_WIDE(vm.hsync_len - 1);
> +	val |= BACK_PORCH(vm.hback_porch - 1);
> +	val |= FRONT_PORCH(vm.hfront_porch - 1);
> +	zx_writel(vou->timing + regs->fir_htiming, val);
> +
> +	val = SYNC_WIDE(vm.vsync_len - 1);
> +	val |= BACK_PORCH(vm.vback_porch - 1);
> +	val |= FRONT_PORCH(vm.vfront_porch - 1);
> +	zx_writel(vou->timing + regs->fir_vtiming, val);
> +
> +	/* Set up polarities */
> +	if (vm.flags & DISPLAY_FLAGS_VSYNC_LOW)
> +		pol |= 1 << POL_VSYNC_SHIFT;
> +	if (vm.flags & DISPLAY_FLAGS_HSYNC_LOW)
> +		pol |= 1 << POL_HSYNC_SHIFT;
> +
> +	zx_writel_mask(vou->timing + TIMING_CTRL, bits->polarity_mask,
> +		       pol << bits->polarity_shift);
> +
> +	/* Setup SHIFT register by following what ZTE BSP does */
> +	zx_writel(vou->timing + regs->timing_shift, H_SHIFT_VAL);
> +	zx_writel(vou->timing + regs->timing_pi_shift, H_PI_SHIFT_VAL);
> +
> +	/* Enable TIMING_CTRL */
> +	zx_writel_mask(vou->timing + TIMING_TC_ENABLE, bits->tc_enable,
> +		       bits->tc_enable);
> +
> +	/* Configure channel screen size */
> +	zx_writel_mask(zcrtc->chnreg + CHN_CTRL1, CHN_SCREEN_W_MASK,
> +		       vm.hactive << CHN_SCREEN_W_SHIFT);
> +	zx_writel_mask(zcrtc->chnreg + CHN_CTRL1, CHN_SCREEN_H_MASK,
> +		       vm.vactive << CHN_SCREEN_H_SHIFT);
> +
> +	/* Update channel */
> +	vou_chn_set_update(zcrtc);
> +
> +	/* Enable channel */
> +	zx_writel_mask(zcrtc->chnreg + CHN_CTRL0, CHN_ENABLE, CHN_ENABLE);
> +
> +	/* Enable Graphic Layer */
> +	zx_writel_mask(vou->osd + OSD_CTRL0, bits->gl_enable,
> +		       bits->gl_enable);
> +
> +	drm_crtc_vblank_on(crtc);
> +
> +	ret = clk_set_rate(zcrtc->pixclk, mode->clock * 1000);
> +	if (ret) {
> +		dev_warn(vou->dev, "failed to set pixclk rate: %d\n", ret);

DRM_WARN

> +		return;
> +	}
> +
> +	ret = clk_prepare_enable(zcrtc->pixclk);
> +	if (ret)
> +		dev_warn(vou->dev, "failed to enable pixclk: %d\n", ret);
> +}
> +
> +static void zx_crtc_disable(struct drm_crtc *crtc)
> +{
> +	struct zx_crtc *zcrtc = to_zx_crtc(crtc);
> +	const struct zx_crtc_bits *bits = zcrtc->bits;
> +	struct zx_vou_hw *vou = zcrtc->vou;
> +
> +	clk_disable_unprepare(zcrtc->pixclk);
> +
> +	drm_crtc_vblank_off(crtc);
> +
> +	/* Disable Graphic Layer */
> +	zx_writel_mask(vou->osd + OSD_CTRL0, bits->gl_enable, 0);
> +
> +	/* Disable channel */
> +	zx_writel_mask(zcrtc->chnreg + CHN_CTRL0, CHN_ENABLE, 0);
> +
> +	/* Disable TIMING_CTRL */
> +	zx_writel_mask(vou->timing + TIMING_TC_ENABLE, bits->tc_enable, 0);
> +}
> +
> +static void zx_crtc_atomic_begin(struct drm_crtc *crtc,
> +				 struct drm_crtc_state *state)
> +{
> +	struct drm_pending_vblank_event *event = crtc->state->event;
> +
> +	if (!event)
> +		return;
> +
> +	crtc->state->event = NULL;
> +
> +	spin_lock_irq(&crtc->dev->event_lock);
> +	if (drm_crtc_vblank_get(crtc) == 0)
> +		drm_crtc_arm_vblank_event(crtc, event);
> +	else
> +		drm_crtc_send_vblank_event(crtc, event);
> +	spin_unlock_irq(&crtc->dev->event_lock);

I think you may want to send the vblank event to userspace after you
commit your planes, and not before.

> +}
> +
> +static const struct drm_crtc_helper_funcs zx_crtc_helper_funcs = {
> +	.enable = zx_crtc_enable,
> +	.disable = zx_crtc_disable,
> +	.atomic_begin = zx_crtc_atomic_begin,
> +};
> +
> +static const struct drm_crtc_funcs zx_crtc_funcs = {
> +	.destroy = drm_crtc_cleanup,
> +	.set_config = drm_atomic_helper_set_config,
> +	.page_flip = drm_atomic_helper_page_flip,
> +	.reset = drm_atomic_helper_crtc_reset,
> +	.atomic_duplicate_state = drm_atomic_helper_crtc_duplicate_state,
> +	.atomic_destroy_state = drm_atomic_helper_crtc_destroy_state,
> +};
> +
> +static int zx_crtc_init(struct drm_device *drm, struct zx_vou_hw *vou,
> +			enum vou_chn_type chn_type)
> +{
> +	struct device *dev = vou->dev;
> +	struct zx_layer_data data;
> +	struct zx_crtc *zcrtc;
> +	int ret;
> +
> +	zcrtc = devm_kzalloc(dev, sizeof(*zcrtc), GFP_KERNEL);
> +	if (!zcrtc)
> +		return -ENOMEM;
> +
> +	zcrtc->vou = vou;
> +	zcrtc->chn_type = chn_type;
> +
> +	if (chn_type == VOU_CHN_MAIN) {
> +		data.layer = vou->osd + MAIN_GL_OFFSET;
> +		data.csc = vou->osd + MAIN_CSC_OFFSET;
> +		data.hbsc = vou->osd + MAIN_HBSC_OFFSET;
> +		data.rsz = vou->otfppu + MAIN_RSZ_OFFSET;
> +		zcrtc->chnreg = vou->osd + OSD_MAIN_CHN;
> +		zcrtc->regs = &main_crtc_regs;
> +		zcrtc->bits = &main_crtc_bits;
> +	} else {
> +		data.layer = vou->osd + AUX_GL_OFFSET;
> +		data.csc = vou->osd + AUX_CSC_OFFSET;
> +		data.hbsc = vou->osd + AUX_HBSC_OFFSET;
> +		data.rsz = vou->otfppu + AUX_RSZ_OFFSET;
> +		zcrtc->chnreg = vou->osd + OSD_AUX_CHN;
> +		zcrtc->regs = &aux_crtc_regs;
> +		zcrtc->bits = &aux_crtc_bits;
> +	}
> +
> +	zcrtc->pixclk = devm_clk_get(dev, (chn_type == VOU_CHN_MAIN) ?
> +					  "main_wclk" : "aux_wclk");
> +	if (IS_ERR(zcrtc->pixclk)) {
> +		ret = PTR_ERR(zcrtc->pixclk);
> +		dev_err(dev, "failed to get pix clk: %d\n", ret);

DRM_ERROR() - here and in other places in your patch
Sean Paul Oct. 20, 2016, 1:58 p.m. UTC | #2
On Thu, Oct 20, 2016 at 3:30 AM, Shawn Guo <shawn.guo@linaro.org> wrote:
> It adds the initial ZTE VOU display controller DRM driver.  There are
> still some features to be added, like overlay plane, scaling, and more
> output devices support.  But it's already useful with dual CRTCs and
> HDMI monitor working.
>
> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
> ---
>  drivers/gpu/drm/Kconfig          |   2 +
>  drivers/gpu/drm/Makefile         |   1 +
>  drivers/gpu/drm/zte/Kconfig      |   8 +
>  drivers/gpu/drm/zte/Makefile     |   7 +
>  drivers/gpu/drm/zte/zx_drm_drv.c | 267 +++++++++++++
>  drivers/gpu/drm/zte/zx_drm_drv.h |  36 ++
>  drivers/gpu/drm/zte/zx_hdmi.c    | 678 +++++++++++++++++++++++++++++++++
>  drivers/gpu/drm/zte/zx_plane.c   | 375 ++++++++++++++++++
>  drivers/gpu/drm/zte/zx_plane.h   |  26 ++
>  drivers/gpu/drm/zte/zx_vou.c     | 799 +++++++++++++++++++++++++++++++++++++++
>  drivers/gpu/drm/zte/zx_vou.h     |  46 +++
>  11 files changed, 2245 insertions(+)
>  create mode 100644 drivers/gpu/drm/zte/Kconfig
>  create mode 100644 drivers/gpu/drm/zte/Makefile
>  create mode 100644 drivers/gpu/drm/zte/zx_drm_drv.c
>  create mode 100644 drivers/gpu/drm/zte/zx_drm_drv.h
>  create mode 100644 drivers/gpu/drm/zte/zx_hdmi.c
>  create mode 100644 drivers/gpu/drm/zte/zx_plane.c
>  create mode 100644 drivers/gpu/drm/zte/zx_plane.h
>  create mode 100644 drivers/gpu/drm/zte/zx_vou.c
>  create mode 100644 drivers/gpu/drm/zte/zx_vou.h
>
> diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig
> index 483059a22b1b..a91f8cecbe0f 100644
> --- a/drivers/gpu/drm/Kconfig
> +++ b/drivers/gpu/drm/Kconfig
> @@ -223,6 +223,8 @@ source "drivers/gpu/drm/hisilicon/Kconfig"
>
>  source "drivers/gpu/drm/mediatek/Kconfig"
>
> +source "drivers/gpu/drm/zte/Kconfig"
> +
>  # Keep legacy drivers last
>
>  menuconfig DRM_LEGACY
> diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile
> index 25c720454017..f3251750c92b 100644
> --- a/drivers/gpu/drm/Makefile
> +++ b/drivers/gpu/drm/Makefile
> @@ -86,3 +86,4 @@ obj-$(CONFIG_DRM_FSL_DCU) += fsl-dcu/
>  obj-$(CONFIG_DRM_ETNAVIV) += etnaviv/
>  obj-$(CONFIG_DRM_ARCPGU)+= arc/
>  obj-y                  += hisilicon/
> +obj-$(CONFIG_DRM_ZTE)  += zte/
> diff --git a/drivers/gpu/drm/zte/Kconfig b/drivers/gpu/drm/zte/Kconfig
> new file mode 100644
> index 000000000000..4065b2840f1c
> --- /dev/null
> +++ b/drivers/gpu/drm/zte/Kconfig
> @@ -0,0 +1,8 @@
> +config DRM_ZTE
> +       tristate "DRM Support for ZTE SoCs"
> +       depends on DRM && ARCH_ZX
> +       select DRM_KMS_CMA_HELPER
> +       select DRM_KMS_FB_HELPER
> +       select DRM_KMS_HELPER
> +       help
> +         Choose this option to enable DRM on ZTE ZX SoCs.
> diff --git a/drivers/gpu/drm/zte/Makefile b/drivers/gpu/drm/zte/Makefile
> new file mode 100644
> index 000000000000..699180bfd57c
> --- /dev/null
> +++ b/drivers/gpu/drm/zte/Makefile
> @@ -0,0 +1,7 @@
> +zxdrm-y := \
> +       zx_drm_drv.o \
> +       zx_hdmi.o \
> +       zx_plane.o \
> +       zx_vou.o
> +
> +obj-$(CONFIG_DRM_ZTE) += zxdrm.o
> diff --git a/drivers/gpu/drm/zte/zx_drm_drv.c b/drivers/gpu/drm/zte/zx_drm_drv.c
> new file mode 100644
> index 000000000000..2476a9b92cea
> --- /dev/null
> +++ b/drivers/gpu/drm/zte/zx_drm_drv.c
> @@ -0,0 +1,267 @@
> +/*
> + * Copyright 2016 Linaro Ltd.
> + * Copyright 2016 ZTE Corporation.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/component.h>
> +#include <linux/list.h>
> +#include <linux/module.h>
> +#include <linux/of_graph.h>
> +#include <linux/of_platform.h>
> +#include <linux/spinlock.h>
> +
> +#include <drm/drm_atomic_helper.h>
> +#include <drm/drm_crtc.h>
> +#include <drm/drm_crtc_helper.h>
> +#include <drm/drm_fb_cma_helper.h>
> +#include <drm/drm_fb_helper.h>
> +#include <drm/drm_gem_cma_helper.h>
> +#include <drm/drm_of.h>
> +#include <drm/drmP.h>
> +
> +#include "zx_drm_drv.h"
> +#include "zx_vou.h"
> +
> +struct zx_drm_private {
> +       struct drm_fbdev_cma *fbdev;
> +};
> +
> +static void zx_drm_fb_output_poll_changed(struct drm_device *drm)
> +{
> +       struct zx_drm_private *priv = drm->dev_private;
> +
> +       drm_fbdev_cma_hotplug_event(priv->fbdev);
> +}
> +
> +static const struct drm_mode_config_funcs zx_drm_mode_config_funcs = {
> +       .fb_create = drm_fb_cma_create,
> +       .output_poll_changed = zx_drm_fb_output_poll_changed,
> +       .atomic_check = drm_atomic_helper_check,
> +       .atomic_commit = drm_atomic_helper_commit,
> +};
> +
> +static void zx_drm_lastclose(struct drm_device *drm)
> +{
> +       struct zx_drm_private *priv = drm->dev_private;
> +
> +       drm_fbdev_cma_restore_mode(priv->fbdev);
> +}
> +
> +static const struct file_operations zx_drm_fops = {
> +       .owner = THIS_MODULE,
> +       .open = drm_open,
> +       .release = drm_release,
> +       .unlocked_ioctl = drm_ioctl,
> +#ifdef CONFIG_COMPAT
> +       .compat_ioctl = drm_compat_ioctl,
> +#endif
> +       .poll = drm_poll,
> +       .read = drm_read,
> +       .llseek = noop_llseek,
> +       .mmap = drm_gem_cma_mmap,
> +};
> +
> +static struct drm_driver zx_drm_driver = {
> +       .driver_features = DRIVER_GEM | DRIVER_MODESET | DRIVER_PRIME |
> +                          DRIVER_ATOMIC,
> +       .lastclose = zx_drm_lastclose,
> +       .get_vblank_counter = drm_vblank_no_hw_counter,
> +       .enable_vblank = zx_vou_enable_vblank,
> +       .disable_vblank = zx_vou_disable_vblank,
> +       .gem_free_object = drm_gem_cma_free_object,
> +       .gem_vm_ops = &drm_gem_cma_vm_ops,
> +       .dumb_create = drm_gem_cma_dumb_create,
> +       .dumb_map_offset = drm_gem_cma_dumb_map_offset,
> +       .dumb_destroy = drm_gem_dumb_destroy,
> +       .prime_handle_to_fd = drm_gem_prime_handle_to_fd,
> +       .prime_fd_to_handle = drm_gem_prime_fd_to_handle,
> +       .gem_prime_export = drm_gem_prime_export,
> +       .gem_prime_import = drm_gem_prime_import,
> +       .gem_prime_get_sg_table = drm_gem_cma_prime_get_sg_table,
> +       .gem_prime_import_sg_table = drm_gem_cma_prime_import_sg_table,
> +       .gem_prime_vmap = drm_gem_cma_prime_vmap,
> +       .gem_prime_vunmap = drm_gem_cma_prime_vunmap,
> +       .gem_prime_mmap = drm_gem_cma_prime_mmap,
> +       .fops = &zx_drm_fops,
> +       .name = "zx-vou",
> +       .desc = "ZTE VOU Controller DRM",
> +       .date = "20160811",
> +       .major = 1,
> +       .minor = 0,
> +};
> +
> +static int zx_drm_bind(struct device *dev)
> +{
> +       struct drm_device *drm;
> +       struct zx_drm_private *priv;
> +       int ret;
> +
> +       priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
> +       if (!priv)
> +               return -ENOMEM;
> +
> +       drm = drm_dev_alloc(&zx_drm_driver, dev);
> +       if (!drm)
> +               return -ENOMEM;
> +
> +       drm->dev_private = priv;
> +       dev_set_drvdata(dev, drm);
> +
> +       drm_mode_config_init(drm);
> +       drm->mode_config.min_width = 16;
> +       drm->mode_config.min_height = 16;
> +       drm->mode_config.max_width = 4096;
> +       drm->mode_config.max_height = 4096;
> +       drm->mode_config.funcs = &zx_drm_mode_config_funcs;
> +
> +       ret = component_bind_all(dev, drm);
> +       if (ret) {
> +               dev_err(dev, "failed to bind all components: %d\n", ret);

Consider using the new DRM_DEV_* messages instead of the plain old dev_*

> +               goto out_unregister;
> +       }
> +
> +       ret = drm_vblank_init(drm, drm->mode_config.num_crtc);
> +       if (ret < 0) {
> +               dev_err(dev, "failed to init vblank: %d\n", ret);
> +               goto out_unbind;
> +       }
> +
> +       /*
> +        * We will manage irq handler on our own.  In this case, irq_enabled
> +        * need to be true for using vblank core support.
> +        */
> +       drm->irq_enabled = true;
> +
> +       drm_mode_config_reset(drm);
> +       drm_kms_helper_poll_init(drm);
> +
> +       priv->fbdev = drm_fbdev_cma_init(drm, 32, drm->mode_config.num_crtc,
> +                                        drm->mode_config.num_connector);
> +       if (IS_ERR(priv->fbdev)) {
> +               ret = PTR_ERR(priv->fbdev);
> +               dev_err(dev, "failed to init cma fbdev: %d\n", ret);
> +               priv->fbdev = NULL;
> +               goto out_poll_fini;
> +       }
> +
> +       ret = drm_dev_register(drm, 0);
> +       if (ret)
> +               goto out_fbdev_fini;
> +
> +       return 0;
> +
> +out_fbdev_fini:
> +       if (priv->fbdev) {
> +               drm_fbdev_cma_fini(priv->fbdev);
> +               priv->fbdev = NULL;
> +       }
> +out_poll_fini:
> +       drm_kms_helper_poll_fini(drm);
> +       drm_mode_config_cleanup(drm);
> +       drm_vblank_cleanup(drm);
> +out_unbind:
> +       component_unbind_all(dev, drm);
> +out_unregister:
> +       dev_set_drvdata(dev, NULL);
> +       drm->dev_private = NULL;
> +       drm_dev_unref(drm);
> +       return ret;
> +}
> +
> +static void zx_drm_unbind(struct device *dev)
> +{
> +       struct drm_device *drm = dev_get_drvdata(dev);
> +       struct zx_drm_private *priv = drm->dev_private;
> +
> +       drm_dev_unregister(drm);
> +       if (priv->fbdev) {
> +               drm_fbdev_cma_fini(priv->fbdev);
> +               priv->fbdev = NULL;
> +       }
> +       drm_kms_helper_poll_fini(drm);
> +       drm_mode_config_cleanup(drm);
> +       drm_vblank_cleanup(drm);
> +       component_unbind_all(dev, drm);
> +       dev_set_drvdata(dev, NULL);
> +       drm->dev_private = NULL;
> +       drm_dev_unref(drm);
> +}
> +
> +static const struct component_master_ops zx_drm_master_ops = {
> +       .bind = zx_drm_bind,
> +       .unbind = zx_drm_unbind,
> +};
> +
> +static int compare_of(struct device *dev, void *data)
> +{
> +       return dev->of_node == data;
> +}
> +
> +static int zx_drm_probe(struct platform_device *pdev)
> +{
> +       struct device *dev = &pdev->dev;
> +       struct device_node *parent = dev->of_node;
> +       struct device_node *child;
> +       struct component_match *match = NULL;
> +       int ret;
> +
> +       ret = of_platform_populate(parent, NULL, NULL, dev);
> +       if (ret)
> +               return ret;
> +
> +       for_each_available_child_of_node(parent, child) {
> +               component_match_add(dev, &match, compare_of, child);
> +               of_node_put(child);
> +       }
> +
> +       return component_master_add_with_match(dev, &zx_drm_master_ops, match);
> +}
> +
> +static int zx_drm_remove(struct platform_device *pdev)
> +{
> +       component_master_del(&pdev->dev, &zx_drm_master_ops);
> +       return 0;
> +}
> +
> +static const struct of_device_id zx_drm_of_match[] = {
> +       { .compatible = "zte,zx296718-vou", },
> +       { /* end */ },
> +};
> +MODULE_DEVICE_TABLE(of, zx_drm_of_match);
> +
> +static struct platform_driver zx_drm_platform_driver = {
> +       .probe = zx_drm_probe,
> +       .remove = zx_drm_remove,
> +       .driver = {
> +               .name = "zx-drm",
> +               .of_match_table = zx_drm_of_match,
> +       },
> +};
> +
> +static struct platform_driver *drivers[] = {
> +       &zx_crtc_driver,
> +       &zx_hdmi_driver,
> +       &zx_drm_platform_driver,
> +};
> +
> +static int zx_drm_init(void)
> +{
> +       return platform_register_drivers(drivers, ARRAY_SIZE(drivers));
> +}
> +module_init(zx_drm_init);
> +
> +static void zx_drm_exit(void)
> +{
> +       platform_unregister_drivers(drivers, ARRAY_SIZE(drivers));
> +}
> +module_exit(zx_drm_exit);
> +
> +MODULE_AUTHOR("Shawn Guo <shawn.guo@linaro.org>");
> +MODULE_DESCRIPTION("ZTE ZX VOU DRM driver");
> +MODULE_LICENSE("GPL v2");
> diff --git a/drivers/gpu/drm/zte/zx_drm_drv.h b/drivers/gpu/drm/zte/zx_drm_drv.h
> new file mode 100644
> index 000000000000..e65cd18a6cba
> --- /dev/null
> +++ b/drivers/gpu/drm/zte/zx_drm_drv.h
> @@ -0,0 +1,36 @@
> +/*
> + * Copyright 2016 Linaro Ltd.
> + * Copyright 2016 ZTE Corporation.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + */
> +
> +#ifndef __ZX_DRM_DRV_H__
> +#define __ZX_DRM_DRV_H__
> +
> +extern struct platform_driver zx_crtc_driver;
> +extern struct platform_driver zx_hdmi_driver;
> +
> +static inline u32 zx_readl(void __iomem *reg)
> +{
> +       return readl_relaxed(reg);
> +}
> +
> +static inline void zx_writel(void __iomem *reg, u32 val)
> +{
> +       writel_relaxed(val, reg);
> +}
> +
> +static inline void zx_writel_mask(void __iomem *reg, u32 mask, u32 val)
> +{
> +       u32 tmp;
> +
> +       tmp = zx_readl(reg);
> +       tmp = (tmp & ~mask) | (val & mask);
> +       zx_writel(reg, tmp);
> +}
> +
> +#endif /* __ZX_DRM_DRV_H__ */
> diff --git a/drivers/gpu/drm/zte/zx_hdmi.c b/drivers/gpu/drm/zte/zx_hdmi.c
> new file mode 100644
> index 000000000000..81e1c3716ed8
> --- /dev/null
> +++ b/drivers/gpu/drm/zte/zx_hdmi.c
> @@ -0,0 +1,678 @@
> +/*
> + * Copyright 2016 Linaro Ltd.
> + * Copyright 2016 ZTE Corporation.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/component.h>
> +#include <linux/delay.h>
> +#include <linux/err.h>
> +#include <linux/hdmi.h>
> +#include <linux/irq.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/module.h>
> +#include <linux/mutex.h>
> +#include <linux/of_device.h>
> +
> +#include <drm/drm_atomic_helper.h>
> +#include <drm/drm_crtc_helper.h>
> +#include <drm/drm_edid.h>
> +#include <drm/drm_of.h>
> +#include <drm/drmP.h>
> +
> +#include "zx_vou.h"
> +
> +#define FUNC_SEL                       0x000b
> +#define FUNC_HDMI_EN                   BIT(0)
> +#define CLKPWD                         0x000d
> +#define CLKPWD_PDIDCK                  BIT(2)
> +#define PWD_SRST                       0x0010
> +#define P2T_CTRL                       0x0066
> +#define P2T_DC_PKT_EN                  BIT(7)
> +#define L1_INTR_STAT                   0x007e
> +#define L1_INTR_STAT_INTR1             BIT(0)
> +#define INTR1_STAT                     0x008f
> +#define INTR1_MASK                     0x0095
> +#define INTR1_MONITOR_DETECT           (BIT(5) | BIT(6))
> +#define ZX_DDC_ADDR                    0x00ed
> +#define ZX_DDC_SEGM                    0x00ee
> +#define ZX_DDC_OFFSET                  0x00ef
> +#define ZX_DDC_DIN_CNT1                        0x00f0
> +#define ZX_DDC_DIN_CNT2                        0x00f1
> +#define ZX_DDC_CMD                     0x00f3
> +#define DDC_CMD_MASK                   0xf
> +#define DDC_CMD_CLEAR_FIFO             0x9
> +#define DDC_CMD_SEQUENTIAL_READ                0x2
> +#define ZX_DDC_DATA                    0x00f4
> +#define ZX_DDC_DOUT_CNT                        0x00f5
> +#define DDC_DOUT_CNT_MASK              0x1f
> +#define TEST_TXCTRL                    0x00f7
> +#define TEST_TXCTRL_HDMI_MODE          BIT(1)
> +#define HDMICTL4                       0x0235
> +#define TPI_HPD_RSEN                   0x063b
> +#define TPI_HPD_CONNECTION             (BIT(1) | BIT(2))
> +#define TPI_INFO_FSEL                  0x06bf
> +#define FSEL_AVI                       0
> +#define FSEL_GBD                       1
> +#define FSEL_AUDIO                     2
> +#define FSEL_SPD                       3
> +#define FSEL_MPEG                      4
> +#define FSEL_VSIF                      5
> +#define TPI_INFO_B0                    0x06c0
> +#define TPI_INFO_EN                    0x06df
> +#define TPI_INFO_TRANS_EN              BIT(7)
> +#define TPI_INFO_TRANS_RPT             BIT(6)
> +#define TPI_DDC_MASTER_EN              0x06f8
> +#define HW_DDC_MASTER                  BIT(7)
> +
> +#define ZX_HDMI_INFOFRAME_SIZE         31
> +
> +#define DDC_SEGMENT_ADDR               0x30
> +
> +struct zx_hdmi_i2c {
> +       struct i2c_adapter adap;
> +       struct mutex lock;
> +};
> +
> +struct zx_hdmi {
> +       struct drm_connector connector;
> +       struct drm_encoder encoder;
> +       struct zx_hdmi_i2c *ddc;
> +       struct device *dev;
> +       struct drm_device *drm;
> +       void __iomem *mmio;
> +       struct clk *cec_clk;
> +       struct clk *osc_clk;
> +       struct clk *xclk;
> +       bool sink_is_hdmi;
> +       bool sink_has_audio;
> +       const struct vou_inf *inf;
> +};
> +
> +#define to_zx_hdmi(x) container_of(x, struct zx_hdmi, x)
> +
> +static const struct vou_inf vou_inf_hdmi = {
> +       .id = VOU_HDMI,
> +       .data_sel = VOU_YUV444,
> +       .clocks_en_bits = BIT(24) | BIT(18) | BIT(6),
> +       .clocks_sel_bits = BIT(13) | BIT(2),
> +};
> +
> +static inline u8 hdmi_readb(struct zx_hdmi *hdmi, u16 offset)
> +{
> +       return readl_relaxed(hdmi->mmio + offset * 4);
> +}
> +
> +static inline void hdmi_writeb(struct zx_hdmi *hdmi, u16 offset, u8 val)
> +{
> +       writel_relaxed(val, hdmi->mmio + offset * 4);
> +}
> +
> +static inline void hdmi_writeb_mask(struct zx_hdmi *hdmi, u16 offset,
> +                                   u8 mask, u8 val)
> +{
> +       u8 tmp;
> +
> +       tmp = hdmi_readb(hdmi, offset);
> +       tmp = (tmp & ~mask) | (val & mask);
> +       hdmi_writeb(hdmi, offset, tmp);
> +}
> +
> +static int zx_hdmi_infoframe_trans(struct zx_hdmi *hdmi,
> +                                  union hdmi_infoframe *frame, u8 fsel)
> +{
> +       u8 buffer[ZX_HDMI_INFOFRAME_SIZE];
> +       int num;
> +       int i;
> +
> +       hdmi_writeb(hdmi, TPI_INFO_FSEL, fsel);
> +
> +       num = hdmi_infoframe_pack(frame, buffer, ZX_HDMI_INFOFRAME_SIZE);
> +       if (num < 0) {
> +               dev_err(hdmi->dev, "failed to pack infoframe: %d\n", num);
> +               return num;
> +       }
> +
> +       for (i = 0; i < num; i++)
> +               hdmi_writeb(hdmi, TPI_INFO_B0 + i, buffer[i]);
> +
> +       hdmi_writeb_mask(hdmi, TPI_INFO_EN, TPI_INFO_TRANS_RPT,
> +                        TPI_INFO_TRANS_RPT);
> +       hdmi_writeb_mask(hdmi, TPI_INFO_EN, TPI_INFO_TRANS_EN,
> +                        TPI_INFO_TRANS_EN);
> +
> +       return num;
> +}
> +
> +static int zx_hdmi_config_video_vsi(struct zx_hdmi *hdmi,
> +                                   struct drm_display_mode *mode)
> +{
> +       union hdmi_infoframe frame;
> +       int ret;
> +
> +       ret = drm_hdmi_vendor_infoframe_from_display_mode(&frame.vendor.hdmi,
> +                                                         mode);
> +       if (ret) {
> +               dev_err(hdmi->dev, "failed to get vendor infoframe: %d\n", ret);
> +               return ret;
> +       }
> +
> +       return zx_hdmi_infoframe_trans(hdmi, &frame, FSEL_VSIF);
> +}
> +
> +static int zx_hdmi_config_video_avi(struct zx_hdmi *hdmi,
> +                                   struct drm_display_mode *mode)
> +{
> +       union hdmi_infoframe frame;
> +       int ret;
> +
> +       ret = drm_hdmi_avi_infoframe_from_display_mode(&frame.avi, mode);
> +       if (ret) {
> +               dev_err(hdmi->dev, "failed to get avi infoframe: %d\n", ret);
> +               return ret;
> +       }
> +
> +       /* We always use YUV444 for HDMI output. */
> +       frame.avi.colorspace = HDMI_COLORSPACE_YUV444;
> +
> +       return zx_hdmi_infoframe_trans(hdmi, &frame, FSEL_AVI);
> +}
> +
> +static void zx_hdmi_encoder_mode_set(struct drm_encoder *encoder,
> +                                    struct drm_display_mode *mode,
> +                                    struct drm_display_mode *adj_mode)
> +{
> +       struct zx_hdmi *hdmi = to_zx_hdmi(encoder);
> +
> +       if (hdmi->sink_is_hdmi) {
> +               zx_hdmi_config_video_avi(hdmi, mode);
> +               zx_hdmi_config_video_vsi(hdmi, mode);
> +       }
> +}
> +
> +static void zx_hdmi_encoder_enable(struct drm_encoder *encoder)
> +{
> +       struct zx_hdmi *hdmi = to_zx_hdmi(encoder);
> +
> +       vou_inf_enable(hdmi->inf, encoder->crtc);
> +}
> +
> +static void zx_hdmi_encoder_disable(struct drm_encoder *encoder)
> +{
> +       struct zx_hdmi *hdmi = to_zx_hdmi(encoder);
> +
> +       vou_inf_disable(hdmi->inf, encoder->crtc);
> +}
> +
> +static const struct drm_encoder_helper_funcs zx_hdmi_encoder_helper_funcs = {
> +       .enable = zx_hdmi_encoder_enable,
> +       .disable = zx_hdmi_encoder_disable,
> +       .mode_set = zx_hdmi_encoder_mode_set,
> +};
> +
> +static const struct drm_encoder_funcs zx_hdmi_encoder_funcs = {
> +       .destroy = drm_encoder_cleanup,
> +};
> +
> +static int zx_hdmi_connector_get_modes(struct drm_connector *connector)
> +{
> +       struct zx_hdmi *hdmi = to_zx_hdmi(connector);
> +       struct edid *edid;
> +       int ret;
> +
> +       edid = drm_get_edid(connector, &hdmi->ddc->adap);
> +       if (!edid)
> +               return 0;
> +
> +       hdmi->sink_is_hdmi = drm_detect_hdmi_monitor(edid);
> +       hdmi->sink_has_audio = drm_detect_monitor_audio(edid);
> +       drm_mode_connector_update_edid_property(connector, edid);
> +       ret = drm_add_edid_modes(connector, edid);
> +       kfree(edid);
> +
> +       return ret;
> +}
> +
> +static enum drm_mode_status
> +zx_hdmi_connector_mode_valid(struct drm_connector *connector,
> +                            struct drm_display_mode *mode)
> +{
> +       return MODE_OK;
> +}
> +
> +static struct drm_connector_helper_funcs zx_hdmi_connector_helper_funcs = {
> +       .get_modes = zx_hdmi_connector_get_modes,
> +       .mode_valid = zx_hdmi_connector_mode_valid,
> +};
> +
> +static enum drm_connector_status
> +zx_hdmi_connector_detect(struct drm_connector *connector, bool force)
> +{
> +       struct zx_hdmi *hdmi = to_zx_hdmi(connector);
> +
> +       return (hdmi_readb(hdmi, TPI_HPD_RSEN) & TPI_HPD_CONNECTION) ?
> +               connector_status_connected : connector_status_disconnected;
> +}
> +
> +static void zx_hdmi_connector_destroy(struct drm_connector *connector)
> +{
> +       drm_connector_unregister(connector);
> +       drm_connector_cleanup(connector);
> +}
> +
> +static const struct drm_connector_funcs zx_hdmi_connector_funcs = {
> +       .dpms = drm_atomic_helper_connector_dpms,
> +       .fill_modes = drm_helper_probe_single_connector_modes,
> +       .detect = zx_hdmi_connector_detect,
> +       .destroy = zx_hdmi_connector_destroy,
> +       .reset = drm_atomic_helper_connector_reset,
> +       .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
> +       .atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
> +};
> +
> +static int zx_hdmi_register(struct drm_device *drm, struct zx_hdmi *hdmi)
> +{
> +       struct drm_encoder *encoder = &hdmi->encoder;
> +
> +       encoder->possible_crtcs = VOU_CRTC_MASK;
> +
> +       drm_encoder_init(drm, encoder, &zx_hdmi_encoder_funcs,
> +                        DRM_MODE_ENCODER_TMDS, NULL);
> +       drm_encoder_helper_add(encoder, &zx_hdmi_encoder_helper_funcs);
> +
> +       hdmi->connector.polled = DRM_CONNECTOR_POLL_HPD;
> +
> +       drm_connector_init(drm, &hdmi->connector, &zx_hdmi_connector_funcs,
> +                          DRM_MODE_CONNECTOR_HDMIA);
> +       drm_connector_helper_add(&hdmi->connector,
> +                                &zx_hdmi_connector_helper_funcs);
> +
> +       drm_mode_connector_attach_encoder(&hdmi->connector, encoder);
> +
> +       return 0;
> +}
> +
> +static irqreturn_t zx_hdmi_irq_thread(int irq, void *dev_id)
> +{
> +       struct zx_hdmi *hdmi = dev_id;
> +
> +       drm_helper_hpd_irq_event(hdmi->connector.dev);
> +
> +       return IRQ_HANDLED;
> +}
> +
> +static irqreturn_t zx_hdmi_irq_handler(int irq, void *dev_id)
> +{
> +       struct zx_hdmi *hdmi = dev_id;
> +       u8 lstat;
> +
> +       lstat = hdmi_readb(hdmi, L1_INTR_STAT);
> +
> +       /* Monitor detect/HPD interrupt */
> +       if (lstat & L1_INTR_STAT_INTR1) {
> +               u8 stat;
> +
> +               stat = hdmi_readb(hdmi, INTR1_STAT);
> +               hdmi_writeb(hdmi, INTR1_STAT, stat);
> +
> +               if (stat & INTR1_MONITOR_DETECT)
> +                       return IRQ_WAKE_THREAD;
> +       }
> +
> +       return IRQ_NONE;
> +}
> +
> +static int zx_hdmi_i2c_read(struct zx_hdmi *hdmi, struct i2c_msg *msg)
> +{
> +       int len = msg->len;
> +       u8 *buf = msg->buf;
> +       int retry = 0;
> +       int ret = 0;
> +
> +       /* Bits [9:8] of bytes */
> +       hdmi_writeb(hdmi, ZX_DDC_DIN_CNT2, (len >> 8) & 0xff);
> +       /* Bits [7:0] of bytes */
> +       hdmi_writeb(hdmi, ZX_DDC_DIN_CNT1, len & 0xff);
> +
> +       /* Clear FIFO */
> +       hdmi_writeb_mask(hdmi, ZX_DDC_CMD, DDC_CMD_MASK, DDC_CMD_CLEAR_FIFO);
> +
> +       /* Kick off the read */
> +       hdmi_writeb_mask(hdmi, ZX_DDC_CMD, DDC_CMD_MASK,
> +                        DDC_CMD_SEQUENTIAL_READ);
> +
> +       while (len > 0) {
> +               int cnt, i;
> +
> +               /* FIFO needs some time to get ready */
> +               usleep_range(500, 1000);
> +
> +               cnt = hdmi_readb(hdmi, ZX_DDC_DOUT_CNT) & DDC_DOUT_CNT_MASK;
> +               if (cnt == 0) {
> +                       if (++retry > 5) {
> +                               dev_err(hdmi->dev, "DDC FIFO read timed out!");
> +                               ret = -ETIMEDOUT;
> +                               break;

Why not just return -ETIMEDOUT here?


> +                       }
> +                       continue;
> +               }
> +
> +               for (i = 0; i < cnt; i++)
> +                       *buf++ = hdmi_readb(hdmi, ZX_DDC_DATA);
> +               len -= cnt;
> +       }
> +
> +       return ret;
> +}
> +
> +static int zx_hdmi_i2c_write(struct zx_hdmi *hdmi, struct i2c_msg *msg)
> +{
> +       /*
> +        * The DDC I2C adapter is only for reading EDID data, so we assume
> +        * that the write to this adapter must be the EDID data offset.
> +        */
> +       if ((msg->len != 1) ||
> +           ((msg->addr != DDC_ADDR) && (msg->addr != DDC_SEGMENT_ADDR)))
> +               return -EINVAL;
> +
> +       if (msg->addr == DDC_SEGMENT_ADDR)
> +               hdmi_writeb(hdmi, ZX_DDC_SEGM, msg->addr << 1);
> +       else if (msg->addr == DDC_ADDR)
> +               hdmi_writeb(hdmi, ZX_DDC_ADDR, msg->addr << 1);
> +
> +       hdmi_writeb(hdmi, ZX_DDC_OFFSET, msg->buf[0]);
> +
> +       return 0;
> +}
> +
> +static int zx_hdmi_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
> +                           int num)
> +{
> +       struct zx_hdmi *hdmi = i2c_get_adapdata(adap);
> +       struct zx_hdmi_i2c *ddc = hdmi->ddc;
> +       int i, ret = 0;
> +
> +       mutex_lock(&ddc->lock);
> +
> +       /* Enable DDC master access */
> +       hdmi_writeb_mask(hdmi, TPI_DDC_MASTER_EN, HW_DDC_MASTER, HW_DDC_MASTER);
> +
> +       for (i = 0; i < num; i++) {
> +               dev_dbg(hdmi->dev, "xfer: num: %d/%d, len: %d, flags: %#x\n",
> +                       i + 1, num, msgs[i].len, msgs[i].flags);
> +
> +               if (msgs[i].flags & I2C_M_RD)
> +                       ret = zx_hdmi_i2c_read(hdmi, &msgs[i]);
> +               else
> +                       ret = zx_hdmi_i2c_write(hdmi, &msgs[i]);
> +
> +               if (ret < 0)
> +                       break;
> +       }
> +
> +       if (!ret)
> +               ret = num;
> +
> +       /* Disable DDC master access */
> +       hdmi_writeb_mask(hdmi, TPI_DDC_MASTER_EN, HW_DDC_MASTER, 0);
> +
> +       mutex_unlock(&ddc->lock);
> +
> +       return ret;
> +}
> +
> +static u32 zx_hdmi_i2c_func(struct i2c_adapter *adapter)
> +{
> +       return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
> +}
> +
> +static const struct i2c_algorithm zx_hdmi_algorithm = {
> +       .master_xfer    = zx_hdmi_i2c_xfer,
> +       .functionality  = zx_hdmi_i2c_func,
> +};
> +
> +static int zx_hdmi_ddc_register(struct zx_hdmi *hdmi)
> +{
> +       struct i2c_adapter *adap;
> +       struct zx_hdmi_i2c *ddc;
> +       int ret;
> +
> +       ddc = devm_kzalloc(hdmi->dev, sizeof(*ddc), GFP_KERNEL);
> +       if (!ddc)
> +               return -ENOMEM;
> +
> +       hdmi->ddc = ddc;
> +       mutex_init(&ddc->lock);
> +
> +       adap = &ddc->adap;
> +       adap->owner = THIS_MODULE;
> +       adap->class = I2C_CLASS_DDC;
> +       adap->dev.parent = hdmi->dev;
> +       adap->algo = &zx_hdmi_algorithm;
> +       snprintf(adap->name, sizeof(adap->name), "zx hdmi i2c");
> +
> +       ret = i2c_add_adapter(adap);
> +       if (ret) {
> +               dev_err(hdmi->dev, "failed to add I2C adapter: %d\n", ret);
> +               return ret;
> +       }
> +
> +       i2c_set_adapdata(adap, hdmi);
> +
> +       return 0;
> +}
> +
> +static void zx_hdmi_phy_start(struct zx_hdmi *hdmi)
> +{
> +       /* Copy from ZTE BSP code */
> +       hdmi_writeb(hdmi, 0x222, 0x0);
> +       hdmi_writeb(hdmi, 0x224, 0x4);
> +       hdmi_writeb(hdmi, 0x909, 0x0);
> +       hdmi_writeb(hdmi, 0x7b0, 0x90);
> +       hdmi_writeb(hdmi, 0x7b1, 0x00);
> +       hdmi_writeb(hdmi, 0x7b2, 0xa7);
> +       hdmi_writeb(hdmi, 0x7b8, 0xaa);
> +       hdmi_writeb(hdmi, 0x7b2, 0xa7);
> +       hdmi_writeb(hdmi, 0x7b3, 0x0f);
> +       hdmi_writeb(hdmi, 0x7b4, 0x0f);
> +       hdmi_writeb(hdmi, 0x7b5, 0x55);
> +       hdmi_writeb(hdmi, 0x7b7, 0x03);
> +       hdmi_writeb(hdmi, 0x7b9, 0x12);
> +       hdmi_writeb(hdmi, 0x7ba, 0x32);
> +       hdmi_writeb(hdmi, 0x7bc, 0x68);
> +       hdmi_writeb(hdmi, 0x7be, 0x40);
> +       hdmi_writeb(hdmi, 0x7bf, 0x84);
> +       hdmi_writeb(hdmi, 0x7c1, 0x0f);
> +       hdmi_writeb(hdmi, 0x7c8, 0x02);
> +       hdmi_writeb(hdmi, 0x7c9, 0x03);
> +       hdmi_writeb(hdmi, 0x7ca, 0x40);
> +       hdmi_writeb(hdmi, 0x7dc, 0x31);
> +       hdmi_writeb(hdmi, 0x7e2, 0x04);
> +       hdmi_writeb(hdmi, 0x7e0, 0x06);
> +       hdmi_writeb(hdmi, 0x7cb, 0x68);
> +       hdmi_writeb(hdmi, 0x7f9, 0x02);
> +       hdmi_writeb(hdmi, 0x7b6, 0x02);
> +       hdmi_writeb(hdmi, 0x7f3, 0x0);
> +}
> +
> +static void zx_hdmi_hw_init(struct zx_hdmi *hdmi)
> +{
> +       /* Software reset */
> +       hdmi_writeb(hdmi, PWD_SRST, 1);
> +
> +       /* Enable pclk */
> +       hdmi_writeb_mask(hdmi, CLKPWD, CLKPWD_PDIDCK, CLKPWD_PDIDCK);
> +
> +       /* Enable HDMI for TX */
> +       hdmi_writeb_mask(hdmi, FUNC_SEL, FUNC_HDMI_EN, FUNC_HDMI_EN);
> +
> +       /* Enable deep color packet */
> +       hdmi_writeb_mask(hdmi, P2T_CTRL, P2T_DC_PKT_EN, P2T_DC_PKT_EN);
> +
> +       /* Enable HDMI/MHL mode for output */
> +       hdmi_writeb_mask(hdmi, TEST_TXCTRL, TEST_TXCTRL_HDMI_MODE,
> +                        TEST_TXCTRL_HDMI_MODE);
> +
> +       /* Configure reg_qc_sel */
> +       hdmi_writeb(hdmi, HDMICTL4, 0x3);
> +
> +       /* Enable interrupt */
> +       hdmi_writeb_mask(hdmi, INTR1_MASK, INTR1_MONITOR_DETECT,
> +                        INTR1_MONITOR_DETECT);
> +
> +       /* Clear reset for normal operation */
> +       hdmi_writeb(hdmi, PWD_SRST, 0);
> +
> +       /* Start up phy */
> +       zx_hdmi_phy_start(hdmi);
> +}
> +
> +static int zx_hdmi_bind(struct device *dev, struct device *master, void *data)
> +{
> +       struct platform_device *pdev = to_platform_device(dev);
> +       struct drm_device *drm = data;
> +       struct resource *res;
> +       struct zx_hdmi *hdmi;
> +       int irq;
> +       int ret;
> +
> +       hdmi = devm_kzalloc(dev, sizeof(*hdmi), GFP_KERNEL);
> +       if (!hdmi)
> +               return -ENOMEM;
> +
> +       hdmi->dev = dev;
> +       hdmi->drm = drm;
> +       hdmi->inf = &vou_inf_hdmi;
> +
> +       dev_set_drvdata(dev, hdmi);
> +
> +       res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +       hdmi->mmio = devm_ioremap_resource(dev, res);
> +       if (IS_ERR(hdmi->mmio)) {
> +               ret = PTR_ERR(hdmi->mmio);
> +               dev_err(dev, "failed to remap hdmi region: %d\n", ret);
> +               return ret;
> +       }
> +
> +       irq = platform_get_irq(pdev, 0);
> +       if (irq < 0)
> +               return irq;
> +
> +       hdmi->cec_clk = devm_clk_get(hdmi->dev, "osc_cec");
> +       if (IS_ERR(hdmi->cec_clk)) {
> +               ret = PTR_ERR(hdmi->cec_clk);
> +               dev_err(dev, "failed to get cec_clk: %d\n", ret);
> +               return ret;
> +       }
> +
> +       hdmi->osc_clk = devm_clk_get(hdmi->dev, "osc_clk");
> +       if (IS_ERR(hdmi->osc_clk)) {
> +               ret = PTR_ERR(hdmi->osc_clk);
> +               dev_err(dev, "failed to get osc_clk: %d\n", ret);
> +               return ret;
> +       }
> +
> +       hdmi->xclk = devm_clk_get(hdmi->dev, "xclk");
> +       if (IS_ERR(hdmi->xclk)) {
> +               ret = PTR_ERR(hdmi->xclk);
> +               dev_err(dev, "failed to get xclk: %d\n", ret);
> +               return ret;
> +       }
> +
> +       zx_hdmi_hw_init(hdmi);
> +
> +       ret = clk_prepare_enable(hdmi->cec_clk);
> +       if (ret) {
> +               dev_err(dev, "failed to enable cec_clk: %d\n", ret);
> +               return ret;
> +       }
> +
> +       ret = clk_prepare_enable(hdmi->osc_clk);
> +       if (ret) {
> +               dev_err(dev, "failed to enable osc_clk: %d\n", ret);
> +               goto disable_cec_clk;
> +       }
> +
> +       ret = clk_prepare_enable(hdmi->xclk);
> +       if (ret) {
> +               dev_err(dev, "failed to enable xclk: %d\n", ret);
> +               goto disable_osc_clk;
> +       }

Perhaps add a TODO above hdmi_hw_init() to move it and the clock
enables to .enable and conversely implement .disable?

> +
> +
> +       ret = zx_hdmi_ddc_register(hdmi);
> +       if (ret) {
> +               dev_err(dev, "failed to register ddc: %d\n", ret);
> +               goto disable_xclk;
> +       }
> +
> +       ret = zx_hdmi_register(drm, hdmi);
> +       if (ret) {
> +               dev_err(dev, "failed to register hdmi: %d\n", ret);
> +               goto disable_xclk;
> +       }
> +
> +       ret = devm_request_threaded_irq(dev, irq, zx_hdmi_irq_handler,
> +                                       zx_hdmi_irq_thread, IRQF_SHARED,
> +                                       dev_name(dev), hdmi);
> +       if (ret) {
> +               dev_err(dev, "failed to request threaded irq: %d\n", ret);
> +               goto disable_xclk;
> +       }
> +
> +       return 0;
> +
> +disable_xclk:
> +       clk_disable_unprepare(hdmi->xclk);
> +disable_osc_clk:
> +       clk_disable_unprepare(hdmi->osc_clk);
> +disable_cec_clk:
> +       clk_disable_unprepare(hdmi->cec_clk);
> +       return ret;
> +}
> +
> +static void zx_hdmi_unbind(struct device *dev, struct device *master,
> +                          void *data)
> +{
> +       struct zx_hdmi *hdmi = dev_get_drvdata(dev);
> +
> +       clk_disable_unprepare(hdmi->xclk);
> +       clk_disable_unprepare(hdmi->osc_clk);
> +       clk_disable_unprepare(hdmi->cec_clk);
> +}
> +
> +static const struct component_ops zx_hdmi_component_ops = {
> +       .bind = zx_hdmi_bind,
> +       .unbind = zx_hdmi_unbind,
> +};
> +
> +static int zx_hdmi_probe(struct platform_device *pdev)
> +{
> +       return component_add(&pdev->dev, &zx_hdmi_component_ops);
> +}
> +
> +static int zx_hdmi_remove(struct platform_device *pdev)
> +{
> +       component_del(&pdev->dev, &zx_hdmi_component_ops);
> +       return 0;
> +}
> +
> +static const struct of_device_id zx_hdmi_of_match[] = {
> +       { .compatible = "zte,zx296718-hdmi", },
> +       { /* end */ },
> +};
> +MODULE_DEVICE_TABLE(of, zx_hdmi_of_match);
> +
> +struct platform_driver zx_hdmi_driver = {
> +       .probe = zx_hdmi_probe,
> +       .remove = zx_hdmi_remove,
> +       .driver = {
> +               .name = "zx-hdmi",
> +               .of_match_table = zx_hdmi_of_match,
> +       },
> +};
> diff --git a/drivers/gpu/drm/zte/zx_plane.c b/drivers/gpu/drm/zte/zx_plane.c
> new file mode 100644
> index 000000000000..fdab1715bee5
> --- /dev/null
> +++ b/drivers/gpu/drm/zte/zx_plane.c
> @@ -0,0 +1,375 @@
> +/*
> + * Copyright 2016 Linaro Ltd.
> + * Copyright 2016 ZTE Corporation.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + */
> +
> +#include <drm/drm_atomic.h>
> +#include <drm/drm_atomic_helper.h>
> +#include <drm/drm_fb_cma_helper.h>
> +#include <drm/drm_gem_cma_helper.h>
> +#include <drm/drm_modeset_helper_vtables.h>
> +#include <drm/drm_plane_helper.h>
> +#include <drm/drmP.h>
> +
> +#include "zx_drm_drv.h"
> +#include "zx_plane.h"
> +#include "zx_vou.h"
> +
> +/* GL registers */
> +#define GL_CTRL0                       0x00
> +#define GL_UPDATE                      BIT(5)
> +#define GL_CTRL1                       0x04
> +#define GL_DATA_FMT_SHIFT              0
> +#define GL_DATA_FMT_MASK               (0xf << GL_DATA_FMT_SHIFT)
> +#define GL_FMT_ARGB8888                        0
> +#define GL_FMT_RGB888                  1
> +#define GL_FMT_RGB565                  2
> +#define GL_FMT_ARGB1555                        3
> +#define GL_FMT_ARGB4444                        4
> +#define GL_CTRL2                       0x08
> +#define GL_GLOBAL_ALPHA_SHIFT          8
> +#define GL_GLOBAL_ALPHA_MASK           (0xff << GL_GLOBAL_ALPHA_SHIFT)
> +#define GL_CTRL3                       0x0c
> +#define GL_SCALER_BYPASS_MODE          BIT(0)
> +#define GL_STRIDE                      0x18
> +#define GL_ADDR                                0x1c
> +#define GL_SRC_SIZE                    0x38
> +#define GL_SRC_W_SHIFT                 16
> +#define GL_SRC_W_MASK                  (0x3fff << GL_SRC_W_SHIFT)
> +#define GL_SRC_H_SHIFT                 0
> +#define GL_SRC_H_MASK                  (0x3fff << GL_SRC_H_SHIFT)
> +#define GL_POS_START                   0x9c
> +#define GL_POS_END                     0xa0
> +#define GL_POS_X_SHIFT                 16
> +#define GL_POS_X_MASK                  (0x1fff << GL_POS_X_SHIFT)
> +#define GL_POS_Y_SHIFT                 0
> +#define GL_POS_Y_MASK                  (0x1fff << GL_POS_Y_SHIFT)
> +
> +#define GL_SRC_W(x)    (((x) << GL_SRC_W_SHIFT) & GL_SRC_W_MASK)
> +#define GL_SRC_H(x)    (((x) << GL_SRC_H_SHIFT) & GL_SRC_H_MASK)
> +#define GL_POS_X(x)    (((x) << GL_POS_X_SHIFT) & GL_POS_X_MASK)
> +#define GL_POS_Y(x)    (((x) << GL_POS_Y_SHIFT) & GL_POS_Y_MASK)
> +
> +/* CSC registers */
> +#define CSC_CTRL0                      0x30
> +#define CSC_COV_MODE_SHIFT             16
> +#define CSC_COV_MODE_MASK              (0xffff << CSC_COV_MODE_SHIFT)
> +#define CSC_BT601_IMAGE_RGB2YCBCR      0
> +#define CSC_BT601_IMAGE_YCBCR2RGB      1
> +#define CSC_BT601_VIDEO_RGB2YCBCR      2
> +#define CSC_BT601_VIDEO_YCBCR2RGB      3
> +#define CSC_BT709_IMAGE_RGB2YCBCR      4
> +#define CSC_BT709_IMAGE_YCBCR2RGB      5
> +#define CSC_BT709_VIDEO_RGB2YCBCR      6
> +#define CSC_BT709_VIDEO_YCBCR2RGB      7
> +#define CSC_BT2020_IMAGE_RGB2YCBCR     8
> +#define CSC_BT2020_IMAGE_YCBCR2RGB     9
> +#define CSC_BT2020_VIDEO_RGB2YCBCR     10
> +#define CSC_BT2020_VIDEO_YCBCR2RGB     11
> +#define CSC_WORK_ENABLE                        BIT(0)
> +
> +/* RSZ registers */
> +#define RSZ_SRC_CFG                    0x00
> +#define RSZ_DEST_CFG                   0x04
> +#define RSZ_ENABLE_CFG                 0x14
> +
> +#define RSZ_VER_SHIFT                  16
> +#define RSZ_VER_MASK                   (0xffff << RSZ_VER_SHIFT)
> +#define RSZ_HOR_SHIFT                  0
> +#define RSZ_HOR_MASK                   (0xffff << RSZ_HOR_SHIFT)
> +
> +#define RSZ_VER(x)     (((x) << RSZ_VER_SHIFT) & RSZ_VER_MASK)
> +#define RSZ_HOR(x)     (((x) << RSZ_HOR_SHIFT) & RSZ_HOR_MASK)
> +
> +/* HBSC registers */
> +#define HBSC_SATURATION                        0x00
> +#define HBSC_HUE                       0x04
> +#define HBSC_BRIGHT                    0x08
> +#define HBSC_CONTRAST                  0x0c
> +#define HBSC_THRESHOLD_COL1            0x10
> +#define HBSC_THRESHOLD_COL2            0x14
> +#define HBSC_THRESHOLD_COL3            0x18
> +#define HBSC_CTRL0                     0x28
> +#define HBSC_CTRL_EN                   BIT(2)
> +
> +struct zx_plane {
> +       struct drm_plane plane;
> +       void __iomem *layer;
> +       void __iomem *csc;
> +       void __iomem *hbsc;
> +       void __iomem *rsz;
> +};
> +
> +#define to_zx_plane(plane)     container_of(plane, struct zx_plane, plane)
> +
> +static const uint32_t gl_formats[] = {
> +       DRM_FORMAT_ARGB8888,
> +       DRM_FORMAT_XRGB8888,
> +       DRM_FORMAT_RGB888,
> +       DRM_FORMAT_RGB565,
> +       DRM_FORMAT_ARGB1555,
> +       DRM_FORMAT_ARGB4444,
> +};
> +
> +static int zx_gl_plane_atomic_check(struct drm_plane *plane,
> +                                   struct drm_plane_state *plane_state)
> +{
> +       struct drm_framebuffer *fb = plane_state->fb;
> +       struct drm_crtc *crtc = plane_state->crtc;
> +       struct drm_crtc_state *crtc_state;
> +       struct drm_rect clip;
> +
> +       if (!crtc || !fb)
> +               return 0;
> +
> +       crtc_state = drm_atomic_get_existing_crtc_state(plane_state->state,
> +                                                       crtc);
> +       if (WARN_ON(!crtc_state))
> +               return -EINVAL;
> +
> +       /* plane must match crtc enable state */
> +       if (crtc_state->enable != !!plane_state->crtc)
> +               return -EINVAL;
> +
> +       /* nothing to check when disabling or disabled */
> +       if (!crtc_state->enable)
> +               return 0;

I think you can shuffle things around here to read a bit clearer:

if (!crtc_state->enable)
        return 0;

if (!plane_state->crtc)
        return -EINVAL

> +
> +       clip.x1 = 0;
> +       clip.y1 = 0;
> +       clip.x2 = crtc_state->adjusted_mode.hdisplay;
> +       clip.y2 = crtc_state->adjusted_mode.vdisplay;
> +
> +       return drm_plane_helper_check_state(plane_state, &clip,
> +                                           DRM_PLANE_HELPER_NO_SCALING,
> +                                           DRM_PLANE_HELPER_NO_SCALING,
> +                                           false, true);
> +}
> +
> +static int zx_gl_get_fmt(uint32_t format)
> +{
> +       switch (format) {
> +       case DRM_FORMAT_ARGB8888:
> +       case DRM_FORMAT_XRGB8888:
> +               return GL_FMT_ARGB8888;
> +       case DRM_FORMAT_RGB888:
> +               return GL_FMT_RGB888;
> +       case DRM_FORMAT_RGB565:
> +               return GL_FMT_RGB565;
> +       case DRM_FORMAT_ARGB1555:
> +               return GL_FMT_ARGB1555;
> +       case DRM_FORMAT_ARGB4444:
> +               return GL_FMT_ARGB4444;
> +       default:
> +               WARN_ONCE(1, "invalid pixel format %d\n", format);
> +               return -EINVAL;
> +       }
> +}
> +
> +static inline void zx_gl_set_update(struct zx_plane *zplane)
> +{
> +       void __iomem *layer = zplane->layer;
> +
> +       zx_writel_mask(layer + GL_CTRL0, GL_UPDATE, GL_UPDATE);
> +}
> +
> +static inline void zx_gl_rsz_set_update(struct zx_plane *zplane)
> +{
> +       zx_writel(zplane->rsz + RSZ_ENABLE_CFG, 1);
> +}
> +
> +void zx_plane_set_update(struct drm_plane *plane)
> +{
> +       struct zx_plane *zplane = to_zx_plane(plane);
> +
> +       zx_gl_rsz_set_update(zplane);
> +       zx_gl_set_update(zplane);
> +}
> +
> +static void zx_gl_rsz_setup(struct zx_plane *zplane, u32 src_w, u32 src_h,
> +                           u32 dst_w, u32 dst_h)
> +{
> +       void __iomem *rsz = zplane->rsz;
> +
> +       zx_writel(rsz + RSZ_SRC_CFG, RSZ_VER(src_h - 1) | RSZ_HOR(src_w - 1));
> +       zx_writel(rsz + RSZ_DEST_CFG, RSZ_VER(dst_h - 1) | RSZ_HOR(dst_w - 1));
> +
> +       zx_gl_rsz_set_update(zplane);
> +}
> +
> +static void zx_gl_plane_atomic_update(struct drm_plane *plane,
> +                                     struct drm_plane_state *old_state)
> +{
> +       struct zx_plane *zplane = to_zx_plane(plane);
> +       struct drm_framebuffer *fb = plane->state->fb;
> +       struct drm_gem_cma_object *cma_obj;
> +       void __iomem *layer = zplane->layer;
> +       void __iomem *csc = zplane->csc;
> +       void __iomem *hbsc = zplane->hbsc;
> +       u32 src_x, src_y, src_w, src_h;
> +       u32 dst_x, dst_y, dst_w, dst_h;
> +       unsigned int depth, bpp;
> +       uint32_t format;
> +       dma_addr_t paddr;
> +       u32 stride;
> +       int fmt;
> +
> +       if (!fb)
> +               return;
> +
> +       format = fb->pixel_format;
> +       stride = fb->pitches[0];
> +
> +       src_x = plane->state->src_x >> 16;
> +       src_y = plane->state->src_y >> 16;
> +       src_w = plane->state->src_w >> 16;
> +       src_h = plane->state->src_h >> 16;
> +
> +       dst_x = plane->state->crtc_x;
> +       dst_y = plane->state->crtc_y;
> +       dst_w = plane->state->crtc_w;
> +       dst_h = plane->state->crtc_h;
> +
> +       drm_fb_get_bpp_depth(format, &depth, &bpp);
> +
> +       cma_obj = drm_fb_cma_get_gem_obj(fb, 0);
> +       paddr = cma_obj->paddr + fb->offsets[0];
> +       paddr += src_y * stride + src_x * bpp / 8;
> +       zx_writel(layer + GL_ADDR, paddr);
> +
> +       /* Set up source height/width register */
> +       zx_writel(layer + GL_SRC_SIZE, GL_SRC_W(src_w) | GL_SRC_H(src_h));
> +
> +       /* Set up start position register */
> +       zx_writel(layer + GL_POS_START, GL_POS_X(dst_x) | GL_POS_Y(dst_y));
> +
> +       /* Set up end position register */
> +       zx_writel(layer + GL_POS_END,
> +                 GL_POS_X(dst_x + dst_w) | GL_POS_Y(dst_y + dst_h));
> +
> +       /* Set up stride register */
> +       zx_writel(layer + GL_STRIDE, stride & 0xffff);
> +
> +       /* Set up graphic layer data format */
> +       fmt = zx_gl_get_fmt(format);
> +       if (fmt >= 0)
> +               zx_writel_mask(layer + GL_CTRL1, GL_DATA_FMT_MASK,
> +                              fmt << GL_DATA_FMT_SHIFT);
> +
> +       /* Initialize global alpha with a sane value */
> +       zx_writel_mask(layer + GL_CTRL2, GL_GLOBAL_ALPHA_MASK,
> +                      0xff << GL_GLOBAL_ALPHA_SHIFT);
> +
> +       /* Setup CSC for the GL */
> +       if (dst_h > 720)
> +               zx_writel_mask(csc + CSC_CTRL0, CSC_COV_MODE_MASK,
> +                              CSC_BT709_IMAGE_RGB2YCBCR << CSC_COV_MODE_SHIFT);
> +       else
> +               zx_writel_mask(csc + CSC_CTRL0, CSC_COV_MODE_MASK,
> +                              CSC_BT601_IMAGE_RGB2YCBCR << CSC_COV_MODE_SHIFT);
> +       zx_writel_mask(csc + CSC_CTRL0, CSC_WORK_ENABLE, CSC_WORK_ENABLE);
> +
> +       /* Always use scaler since it exists (set for not bypass) */
> +       zx_writel_mask(layer + GL_CTRL3, GL_SCALER_BYPASS_MODE,
> +                      GL_SCALER_BYPASS_MODE);
> +
> +       zx_gl_rsz_setup(zplane, src_w, src_h, dst_w, dst_h);
> +
> +       /* Enable HBSC block */
> +       zx_writel_mask(hbsc + HBSC_CTRL0, HBSC_CTRL_EN, HBSC_CTRL_EN);
> +
> +       zx_gl_set_update(zplane);
> +}
> +
> +static const struct drm_plane_helper_funcs zx_gl_plane_helper_funcs = {
> +       .atomic_check = zx_gl_plane_atomic_check,
> +       .atomic_update = zx_gl_plane_atomic_update,
> +};
> +
> +static void zx_plane_destroy(struct drm_plane *plane)
> +{
> +       drm_plane_helper_disable(plane);
> +       drm_plane_cleanup(plane);
> +}
> +
> +static const struct drm_plane_funcs zx_plane_funcs = {
> +       .update_plane = drm_atomic_helper_update_plane,
> +       .disable_plane = drm_atomic_helper_disable_plane,
> +       .destroy = zx_plane_destroy,
> +       .reset = drm_atomic_helper_plane_reset,
> +       .atomic_duplicate_state = drm_atomic_helper_plane_duplicate_state,
> +       .atomic_destroy_state = drm_atomic_helper_plane_destroy_state,
> +};
> +
> +static void zx_plane_hbsc_init(struct zx_plane *zplane)
> +{
> +       void __iomem *hbsc = zplane->hbsc;
> +
> +       /*
> +        *  Initialize HBSC block with a sane configuration per recommedation
> +        *  from ZTE BSP code.
> +        */
> +       zx_writel(hbsc + HBSC_SATURATION, 0x200);
> +       zx_writel(hbsc + HBSC_HUE, 0x0);
> +       zx_writel(hbsc + HBSC_BRIGHT, 0x0);
> +       zx_writel(hbsc + HBSC_CONTRAST, 0x200);
> +
> +       zx_writel(hbsc + HBSC_THRESHOLD_COL1, (0x3ac << 16) | 0x40);
> +       zx_writel(hbsc + HBSC_THRESHOLD_COL2, (0x3c0 << 16) | 0x40);
> +       zx_writel(hbsc + HBSC_THRESHOLD_COL3, (0x3c0 << 16) | 0x40);
> +}
> +
> +struct drm_plane *zx_plane_init(struct drm_device *drm, struct device *dev,
> +                               struct zx_layer_data *data,
> +                               enum drm_plane_type type)
> +{
> +       const struct drm_plane_helper_funcs *helper;
> +       struct zx_plane *zplane;
> +       struct drm_plane *plane;
> +       const uint32_t *formats;
> +       unsigned int format_count;
> +       int ret;
> +
> +       zplane = devm_kzalloc(dev, sizeof(*zplane), GFP_KERNEL);
> +       if (!zplane)
> +               return ERR_PTR(-ENOMEM);
> +
> +       plane = &zplane->plane;
> +
> +       zplane->layer = data->layer;
> +       zplane->hbsc = data->hbsc;
> +       zplane->csc = data->csc;
> +       zplane->rsz = data->rsz;
> +
> +       zx_plane_hbsc_init(zplane);
> +
> +       switch (type) {
> +       case DRM_PLANE_TYPE_PRIMARY:
> +               helper = &zx_gl_plane_helper_funcs;
> +               formats = gl_formats;
> +               format_count = ARRAY_SIZE(gl_formats);
> +               break;
> +       case DRM_PLANE_TYPE_OVERLAY:
> +               /* TODO: add video layer (vl) support */
> +               break;
> +       default:
> +               return ERR_PTR(-ENODEV);
> +       }
> +
> +       ret = drm_universal_plane_init(drm, plane, VOU_CRTC_MASK,
> +                                      &zx_plane_funcs, formats, format_count,
> +                                      type, NULL);
> +       if (ret) {
> +               dev_err(dev, "failed to init universal plane: %d\n", ret);
> +               return ERR_PTR(ret);
> +       }
> +
> +       drm_plane_helper_add(plane, helper);
> +
> +       return plane;
> +}
> diff --git a/drivers/gpu/drm/zte/zx_plane.h b/drivers/gpu/drm/zte/zx_plane.h
> new file mode 100644
> index 000000000000..2b82cd558d9d
> --- /dev/null
> +++ b/drivers/gpu/drm/zte/zx_plane.h
> @@ -0,0 +1,26 @@
> +/*
> + * Copyright 2016 Linaro Ltd.
> + * Copyright 2016 ZTE Corporation.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + */
> +
> +#ifndef __ZX_PLANE_H__
> +#define __ZX_PLANE_H__
> +
> +struct zx_layer_data {
> +       void __iomem *layer;
> +       void __iomem *csc;
> +       void __iomem *hbsc;
> +       void __iomem *rsz;
> +};
> +
> +struct drm_plane *zx_plane_init(struct drm_device *drm, struct device *dev,
> +                               struct zx_layer_data *data,
> +                               enum drm_plane_type type);
> +void zx_plane_set_update(struct drm_plane *plane);
> +
> +#endif /* __ZX_PLANE_H__ */
> diff --git a/drivers/gpu/drm/zte/zx_vou.c b/drivers/gpu/drm/zte/zx_vou.c
> new file mode 100644
> index 000000000000..676c750d6009
> --- /dev/null
> +++ b/drivers/gpu/drm/zte/zx_vou.c
> @@ -0,0 +1,799 @@
> +/*
> + * Copyright 2016 Linaro Ltd.
> + * Copyright 2016 ZTE Corporation.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/component.h>
> +#include <linux/of_address.h>
> +#include <video/videomode.h>
> +
> +#include <drm/drm_atomic_helper.h>
> +#include <drm/drm_crtc.h>
> +#include <drm/drm_crtc_helper.h>
> +#include <drm/drm_fb_cma_helper.h>
> +#include <drm/drm_fb_helper.h>
> +#include <drm/drm_gem_cma_helper.h>
> +#include <drm/drm_of.h>
> +#include <drm/drm_plane_helper.h>
> +#include <drm/drmP.h>
> +
> +#include "zx_drm_drv.h"
> +#include "zx_plane.h"
> +#include "zx_vou.h"
> +
> +/* Sub-module offset */
> +#define MAIN_GL_OFFSET                 0x130
> +#define MAIN_CSC_OFFSET                        0x580
> +#define MAIN_HBSC_OFFSET               0x820
> +#define MAIN_RSZ_OFFSET                        0x600 /* OTFPPU sub-module */
> +
> +#define AUX_GL_OFFSET                  0x200
> +#define AUX_CSC_OFFSET                 0x5d0
> +#define AUX_HBSC_OFFSET                        0x860
> +#define AUX_RSZ_OFFSET                 0x800
> +
> +/* OSD (GPC_GLOBAL) registers */
> +#define OSD_INT_STA                    0x04
> +#define OSD_INT_CLRSTA                 0x08
> +#define OSD_INT_MSK                    0x0c
> +#define OSD_INT_AUX_UPT                        BIT(14)
> +#define OSD_INT_MAIN_UPT               BIT(13)
> +#define OSD_INT_GL1_LBW                        BIT(10)
> +#define OSD_INT_GL0_LBW                        BIT(9)
> +#define OSD_INT_VL2_LBW                        BIT(8)
> +#define OSD_INT_VL1_LBW                        BIT(7)
> +#define OSD_INT_VL0_LBW                        BIT(6)
> +#define OSD_INT_BUS_ERR                        BIT(3)
> +#define OSD_INT_CFG_ERR                        BIT(2)
> +#define OSD_INT_ERROR (\
> +       OSD_INT_GL1_LBW | OSD_INT_GL0_LBW | \
> +       OSD_INT_VL2_LBW | OSD_INT_VL1_LBW | OSD_INT_VL0_LBW | \
> +       OSD_INT_BUS_ERR | OSD_INT_CFG_ERR \
> +)
> +#define OSD_INT_ENABLE (OSD_INT_ERROR | OSD_INT_AUX_UPT | OSD_INT_MAIN_UPT)
> +#define OSD_CTRL0                      0x10
> +#define OSD_CTRL0_GL0_EN               BIT(7)
> +#define OSD_CTRL0_GL0_SEL              BIT(6)
> +#define OSD_CTRL0_GL1_EN               BIT(5)
> +#define OSD_CTRL0_GL1_SEL              BIT(4)
> +#define OSD_RST_CLR                    0x1c
> +#define RST_PER_FRAME                  BIT(19)
> +
> +/* Main/Aux channel registers */
> +#define OSD_MAIN_CHN                   0x470
> +#define OSD_AUX_CHN                    0x4d0
> +#define CHN_CTRL0                      0x00
> +#define CHN_ENABLE                     BIT(0)
> +#define CHN_CTRL1                      0x04
> +#define CHN_SCREEN_W_SHIFT             18
> +#define CHN_SCREEN_W_MASK              (0x1fff << CHN_SCREEN_W_SHIFT)
> +#define CHN_SCREEN_H_SHIFT             5
> +#define CHN_SCREEN_H_MASK              (0x1fff << CHN_SCREEN_H_SHIFT)
> +#define CHN_UPDATE                     0x08
> +
> +/* TIMING_CTRL registers */
> +#define TIMING_TC_ENABLE               0x04
> +#define AUX_TC_EN                      BIT(1)
> +#define MAIN_TC_EN                     BIT(0)
> +#define FIR_MAIN_ACTIVE                        0x08
> +#define FIR_AUX_ACTIVE                 0x0c
> +#define V_ACTIVE_SHIFT                 16
> +#define V_ACTIVE_MASK                  (0xffff << V_ACTIVE_SHIFT)
> +#define H_ACTIVE_SHIFT                 0
> +#define H_ACTIVE_MASK                  (0xffff << H_ACTIVE_SHIFT)
> +#define FIR_MAIN_H_TIMING              0x10
> +#define FIR_MAIN_V_TIMING              0x14
> +#define FIR_AUX_H_TIMING               0x18
> +#define FIR_AUX_V_TIMING               0x1c
> +#define SYNC_WIDE_SHIFT                        22
> +#define SYNC_WIDE_MASK                 (0x3ff << SYNC_WIDE_SHIFT)
> +#define BACK_PORCH_SHIFT               11
> +#define BACK_PORCH_MASK                        (0x7ff << BACK_PORCH_SHIFT)
> +#define FRONT_PORCH_SHIFT              0
> +#define FRONT_PORCH_MASK               (0x7ff << FRONT_PORCH_SHIFT)
> +#define TIMING_CTRL                    0x20
> +#define AUX_POL_SHIFT                  3
> +#define AUX_POL_MASK                   (0x7 << AUX_POL_SHIFT)
> +#define MAIN_POL_SHIFT                 0
> +#define MAIN_POL_MASK                  (0x7 << MAIN_POL_SHIFT)
> +#define POL_DE_SHIFT                   2
> +#define POL_VSYNC_SHIFT                        1
> +#define POL_HSYNC_SHIFT                        0
> +#define TIMING_INT_CTRL                        0x24
> +#define TIMING_INT_STATE               0x28
> +#define TIMING_INT_AUX_FRAME           BIT(3)
> +#define TIMING_INT_MAIN_FRAME          BIT(1)
> +#define TIMING_INT_AUX_FRAME_SEL_VSW   (0x2 << 10)
> +#define TIMING_INT_MAIN_FRAME_SEL_VSW  (0x2 << 6)
> +#define TIMING_INT_ENABLE (\
> +       TIMING_INT_MAIN_FRAME_SEL_VSW | TIMING_INT_AUX_FRAME_SEL_VSW | \
> +       TIMING_INT_MAIN_FRAME | TIMING_INT_AUX_FRAME \
> +)
> +#define TIMING_MAIN_SHIFT              0x2c
> +#define TIMING_AUX_SHIFT               0x30
> +#define H_SHIFT_VAL                    0x0048
> +#define TIMING_MAIN_PI_SHIFT           0x68
> +#define TIMING_AUX_PI_SHIFT            0x6c
> +#define H_PI_SHIFT_VAL                 0x000f
> +
> +#define V_ACTIVE(x)    (((x) << V_ACTIVE_SHIFT) & V_ACTIVE_MASK)
> +#define H_ACTIVE(x)    (((x) << H_ACTIVE_SHIFT) & H_ACTIVE_MASK)
> +
> +#define SYNC_WIDE(x)   (((x) << SYNC_WIDE_SHIFT) & SYNC_WIDE_MASK)
> +#define BACK_PORCH(x)  (((x) << BACK_PORCH_SHIFT) & BACK_PORCH_MASK)
> +#define FRONT_PORCH(x) (((x) << FRONT_PORCH_SHIFT) & FRONT_PORCH_MASK)
> +
> +/* DTRC registers */
> +#define DTRC_F0_CTRL                   0x2c
> +#define DTRC_F1_CTRL                   0x5c
> +#define DTRC_DECOMPRESS_BYPASS         BIT(17)
> +#define DTRC_DETILE_CTRL               0x68
> +#define TILE2RASTESCAN_BYPASS_MODE     BIT(30)
> +#define DETILE_ARIDR_MODE_MASK         (0x3 << 0)
> +#define DETILE_ARID_ALL                        0
> +#define DETILE_ARID_IN_ARIDR           1
> +#define DETILE_ARID_BYP_BUT_ARIDR      2
> +#define DETILE_ARID_IN_ARIDR2          3
> +#define DTRC_ARID                      0x6c
> +#define DTRC_ARID3_SHIFT               24
> +#define DTRC_ARID3_MASK                        (0xff << DTRC_ARID3_SHIFT)
> +#define DTRC_ARID2_SHIFT               16
> +#define DTRC_ARID2_MASK                        (0xff << DTRC_ARID2_SHIFT)
> +#define DTRC_ARID1_SHIFT               8
> +#define DTRC_ARID1_MASK                        (0xff << DTRC_ARID1_SHIFT)
> +#define DTRC_ARID0_SHIFT               0
> +#define DTRC_ARID0_MASK                        (0xff << DTRC_ARID0_SHIFT)
> +#define DTRC_DEC2DDR_ARID              0x70
> +
> +#define DTRC_ARID3(x)  (((x) << DTRC_ARID3_SHIFT) & DTRC_ARID3_MASK)
> +#define DTRC_ARID2(x)  (((x) << DTRC_ARID2_SHIFT) & DTRC_ARID2_MASK)
> +#define DTRC_ARID1(x)  (((x) << DTRC_ARID1_SHIFT) & DTRC_ARID1_MASK)
> +#define DTRC_ARID0(x)  (((x) << DTRC_ARID0_SHIFT) & DTRC_ARID0_MASK)
> +
> +/* VOU_CTRL registers */
> +#define VOU_INF_EN                     0x00
> +#define VOU_INF_CH_SEL                 0x04
> +#define VOU_INF_DATA_SEL               0x08
> +#define VOU_SOFT_RST                   0x14
> +#define VOU_CLK_SEL                    0x18
> +#define VOU_CLK_GL1_SEL                        BIT(5)
> +#define VOU_CLK_GL0_SEL                        BIT(4)
> +#define VOU_CLK_REQEN                  0x20
> +#define VOU_CLK_EN                     0x24
> +
> +/* OTFPPU_CTRL registers */
> +#define OTFPPU_RSZ_DATA_SOURCE         0x04
> +

I find the register definitions pretty distracting here (and elsewhere
in the driver), I suppose my personal preference would be to hide them
in the headers.

> +#define GL_NUM                         2
> +#define VL_NUM                         3
> +
> +enum vou_chn_type {
> +       VOU_CHN_MAIN,
> +       VOU_CHN_AUX,
> +};
> +
> +struct zx_crtc_regs {
> +       u32 fir_active;
> +       u32 fir_htiming;
> +       u32 fir_vtiming;
> +       u32 timing_shift;
> +       u32 timing_pi_shift;
> +};
> +
> +static const struct zx_crtc_regs main_crtc_regs = {
> +       .fir_active = FIR_MAIN_ACTIVE,
> +       .fir_htiming = FIR_MAIN_H_TIMING,
> +       .fir_vtiming = FIR_MAIN_V_TIMING,
> +       .timing_shift = TIMING_MAIN_SHIFT,
> +       .timing_pi_shift = TIMING_MAIN_PI_SHIFT,
> +};
> +
> +static const struct zx_crtc_regs aux_crtc_regs = {
> +       .fir_active = FIR_AUX_ACTIVE,
> +       .fir_htiming = FIR_AUX_H_TIMING,
> +       .fir_vtiming = FIR_AUX_V_TIMING,
> +       .timing_shift = TIMING_AUX_SHIFT,
> +       .timing_pi_shift = TIMING_AUX_PI_SHIFT,
> +};
> +
> +struct zx_crtc_bits {
> +       u32 polarity_mask;
> +       u32 polarity_shift;
> +       u32 tc_enable;
> +       u32 gl_enable;
> +};
> +
> +static const struct zx_crtc_bits main_crtc_bits = {
> +       .polarity_mask = MAIN_POL_MASK,
> +       .polarity_shift = MAIN_POL_SHIFT,
> +       .tc_enable = MAIN_TC_EN,
> +       .gl_enable = OSD_CTRL0_GL0_EN,
> +};
> +
> +static const struct zx_crtc_bits aux_crtc_bits = {
> +       .polarity_mask = AUX_POL_MASK,
> +       .polarity_shift = AUX_POL_SHIFT,
> +       .tc_enable = AUX_TC_EN,
> +       .gl_enable = OSD_CTRL0_GL1_EN,
> +};
> +
> +struct zx_crtc {
> +       struct drm_crtc crtc;
> +       struct drm_plane *primary;
> +       struct zx_vou_hw *vou;
> +       void __iomem *chnreg;
> +       const struct zx_crtc_regs *regs;
> +       const struct zx_crtc_bits *bits;
> +       enum vou_chn_type chn_type;
> +       struct clk *pixclk;
> +};
> +
> +#define to_zx_crtc(x) container_of(x, struct zx_crtc, crtc)
> +
> +struct zx_vou_hw {
> +       struct device *dev;
> +       void __iomem *osd;
> +       void __iomem *timing;
> +       void __iomem *vouctl;
> +       void __iomem *otfppu;
> +       void __iomem *dtrc;
> +       struct clk *axi_clk;
> +       struct clk *ppu_clk;
> +       struct clk *main_clk;
> +       struct clk *aux_clk;
> +       struct zx_crtc *main_crtc;
> +       struct zx_crtc *aux_crtc;
> +};
> +
> +static inline struct zx_vou_hw *crtc_to_vou(struct drm_crtc *crtc)
> +{
> +       struct zx_crtc *zcrtc = to_zx_crtc(crtc);
> +
> +       return zcrtc->vou;
> +}
> +
> +void vou_inf_enable(const struct vou_inf *inf, struct drm_crtc *crtc)
> +{
> +       struct zx_crtc *zcrtc = to_zx_crtc(crtc);
> +       struct zx_vou_hw *vou = zcrtc->vou;
> +       bool is_main = zcrtc->chn_type == VOU_CHN_MAIN;
> +       u32 data_sel_shift = inf->id << 1;
> +
> +       /* Select data format */
> +       zx_writel_mask(vou->vouctl + VOU_INF_DATA_SEL, 0x3 << data_sel_shift,
> +                      inf->data_sel << data_sel_shift);
> +
> +       /* Select channel */
> +       zx_writel_mask(vou->vouctl + VOU_INF_CH_SEL, 0x1 << inf->id,
> +                      zcrtc->chn_type << inf->id);
> +
> +       /* Select interface clocks */
> +       zx_writel_mask(vou->vouctl + VOU_CLK_SEL, inf->clocks_sel_bits,
> +                      is_main ? 0 : inf->clocks_sel_bits);
> +
> +       /* Enable interface clocks */
> +       zx_writel_mask(vou->vouctl + VOU_CLK_EN, inf->clocks_en_bits,
> +                      inf->clocks_en_bits);
> +
> +       /* Enable the device */
> +       zx_writel_mask(vou->vouctl + VOU_INF_EN, 1 << inf->id, 1 << inf->id);
> +}
> +
> +void vou_inf_disable(const struct vou_inf *inf, struct drm_crtc *crtc)
> +{
> +       struct zx_vou_hw *vou = crtc_to_vou(crtc);
> +
> +       /* Disable the device */
> +       zx_writel_mask(vou->vouctl + VOU_INF_EN, 1 << inf->id, 0);
> +
> +       /* Disable interface clocks */
> +       zx_writel_mask(vou->vouctl + VOU_CLK_EN, inf->clocks_en_bits, 0);
> +}
> +
> +static inline void vou_chn_set_update(struct zx_crtc *zcrtc)
> +{
> +       zx_writel(zcrtc->chnreg + CHN_UPDATE, 1);
> +}
> +
> +static void zx_crtc_enable(struct drm_crtc *crtc)
> +{
> +       struct drm_display_mode *mode = &crtc->state->adjusted_mode;
> +       struct zx_crtc *zcrtc = to_zx_crtc(crtc);
> +       struct zx_vou_hw *vou = zcrtc->vou;
> +       const struct zx_crtc_regs *regs = zcrtc->regs;
> +       const struct zx_crtc_bits *bits = zcrtc->bits;
> +       struct videomode vm;
> +       u32 pol = 0;
> +       u32 val;
> +       int ret;
> +
> +       drm_display_mode_to_videomode(mode, &vm);
> +
> +       /* Set up timing parameters */
> +       val = V_ACTIVE(vm.vactive - 1);
> +       val |= H_ACTIVE(vm.hactive - 1);
> +       zx_writel(vou->timing + regs->fir_active, val);
> +
> +       val = SYNC_WIDE(vm.hsync_len - 1);
> +       val |= BACK_PORCH(vm.hback_porch - 1);
> +       val |= FRONT_PORCH(vm.hfront_porch - 1);
> +       zx_writel(vou->timing + regs->fir_htiming, val);

Yeah, this is much easier on the eyes (IMO)!

> +
> +       val = SYNC_WIDE(vm.vsync_len - 1);
> +       val |= BACK_PORCH(vm.vback_porch - 1);
> +       val |= FRONT_PORCH(vm.vfront_porch - 1);
> +       zx_writel(vou->timing + regs->fir_vtiming, val);
> +
> +       /* Set up polarities */
> +       if (vm.flags & DISPLAY_FLAGS_VSYNC_LOW)
> +               pol |= 1 << POL_VSYNC_SHIFT;
> +       if (vm.flags & DISPLAY_FLAGS_HSYNC_LOW)
> +               pol |= 1 << POL_HSYNC_SHIFT;
> +
> +       zx_writel_mask(vou->timing + TIMING_CTRL, bits->polarity_mask,
> +                      pol << bits->polarity_shift);
> +
> +       /* Setup SHIFT register by following what ZTE BSP does */
> +       zx_writel(vou->timing + regs->timing_shift, H_SHIFT_VAL);
> +       zx_writel(vou->timing + regs->timing_pi_shift, H_PI_SHIFT_VAL);
> +
> +       /* Enable TIMING_CTRL */
> +       zx_writel_mask(vou->timing + TIMING_TC_ENABLE, bits->tc_enable,
> +                      bits->tc_enable);
> +
> +       /* Configure channel screen size */
> +       zx_writel_mask(zcrtc->chnreg + CHN_CTRL1, CHN_SCREEN_W_MASK,
> +                      vm.hactive << CHN_SCREEN_W_SHIFT);
> +       zx_writel_mask(zcrtc->chnreg + CHN_CTRL1, CHN_SCREEN_H_MASK,
> +                      vm.vactive << CHN_SCREEN_H_SHIFT);
> +
> +       /* Update channel */
> +       vou_chn_set_update(zcrtc);
> +
> +       /* Enable channel */
> +       zx_writel_mask(zcrtc->chnreg + CHN_CTRL0, CHN_ENABLE, CHN_ENABLE);
> +
> +       /* Enable Graphic Layer */
> +       zx_writel_mask(vou->osd + OSD_CTRL0, bits->gl_enable,
> +                      bits->gl_enable);
> +
> +       drm_crtc_vblank_on(crtc);
> +
> +       ret = clk_set_rate(zcrtc->pixclk, mode->clock * 1000);
> +       if (ret) {
> +               dev_warn(vou->dev, "failed to set pixclk rate: %d\n", ret);
> +               return;
> +       }
> +
> +       ret = clk_prepare_enable(zcrtc->pixclk);
> +       if (ret)
> +               dev_warn(vou->dev, "failed to enable pixclk: %d\n", ret);
> +}
> +
> +static void zx_crtc_disable(struct drm_crtc *crtc)
> +{
> +       struct zx_crtc *zcrtc = to_zx_crtc(crtc);
> +       const struct zx_crtc_bits *bits = zcrtc->bits;
> +       struct zx_vou_hw *vou = zcrtc->vou;
> +
> +       clk_disable_unprepare(zcrtc->pixclk);
> +
> +       drm_crtc_vblank_off(crtc);
> +
> +       /* Disable Graphic Layer */
> +       zx_writel_mask(vou->osd + OSD_CTRL0, bits->gl_enable, 0);
> +
> +       /* Disable channel */
> +       zx_writel_mask(zcrtc->chnreg + CHN_CTRL0, CHN_ENABLE, 0);
> +
> +       /* Disable TIMING_CTRL */
> +       zx_writel_mask(vou->timing + TIMING_TC_ENABLE, bits->tc_enable, 0);
> +}
> +
> +static void zx_crtc_atomic_begin(struct drm_crtc *crtc,
> +                                struct drm_crtc_state *state)
> +{
> +       struct drm_pending_vblank_event *event = crtc->state->event;
> +
> +       if (!event)
> +               return;
> +
> +       crtc->state->event = NULL;
> +
> +       spin_lock_irq(&crtc->dev->event_lock);
> +       if (drm_crtc_vblank_get(crtc) == 0)
> +               drm_crtc_arm_vblank_event(crtc, event);
> +       else
> +               drm_crtc_send_vblank_event(crtc, event);
> +       spin_unlock_irq(&crtc->dev->event_lock);
> +}
> +
> +static const struct drm_crtc_helper_funcs zx_crtc_helper_funcs = {
> +       .enable = zx_crtc_enable,
> +       .disable = zx_crtc_disable,
> +       .atomic_begin = zx_crtc_atomic_begin,
> +};
> +
> +static const struct drm_crtc_funcs zx_crtc_funcs = {
> +       .destroy = drm_crtc_cleanup,
> +       .set_config = drm_atomic_helper_set_config,
> +       .page_flip = drm_atomic_helper_page_flip,
> +       .reset = drm_atomic_helper_crtc_reset,
> +       .atomic_duplicate_state = drm_atomic_helper_crtc_duplicate_state,
> +       .atomic_destroy_state = drm_atomic_helper_crtc_destroy_state,
> +};
> +
> +static int zx_crtc_init(struct drm_device *drm, struct zx_vou_hw *vou,
> +                       enum vou_chn_type chn_type)
> +{
> +       struct device *dev = vou->dev;
> +       struct zx_layer_data data;
> +       struct zx_crtc *zcrtc;
> +       int ret;
> +
> +       zcrtc = devm_kzalloc(dev, sizeof(*zcrtc), GFP_KERNEL);
> +       if (!zcrtc)
> +               return -ENOMEM;
> +
> +       zcrtc->vou = vou;
> +       zcrtc->chn_type = chn_type;
> +
> +       if (chn_type == VOU_CHN_MAIN) {
> +               data.layer = vou->osd + MAIN_GL_OFFSET;
> +               data.csc = vou->osd + MAIN_CSC_OFFSET;
> +               data.hbsc = vou->osd + MAIN_HBSC_OFFSET;
> +               data.rsz = vou->otfppu + MAIN_RSZ_OFFSET;
> +               zcrtc->chnreg = vou->osd + OSD_MAIN_CHN;
> +               zcrtc->regs = &main_crtc_regs;
> +               zcrtc->bits = &main_crtc_bits;
> +       } else {
> +               data.layer = vou->osd + AUX_GL_OFFSET;
> +               data.csc = vou->osd + AUX_CSC_OFFSET;
> +               data.hbsc = vou->osd + AUX_HBSC_OFFSET;
> +               data.rsz = vou->otfppu + AUX_RSZ_OFFSET;
> +               zcrtc->chnreg = vou->osd + OSD_AUX_CHN;
> +               zcrtc->regs = &aux_crtc_regs;
> +               zcrtc->bits = &aux_crtc_bits;
> +       }
> +
> +       zcrtc->pixclk = devm_clk_get(dev, (chn_type == VOU_CHN_MAIN) ?
> +                                         "main_wclk" : "aux_wclk");
> +       if (IS_ERR(zcrtc->pixclk)) {
> +               ret = PTR_ERR(zcrtc->pixclk);
> +               dev_err(dev, "failed to get pix clk: %d\n", ret);
> +               return ret;
> +       }
> +
> +       zcrtc->primary = zx_plane_init(drm, dev, &data, DRM_PLANE_TYPE_PRIMARY);
> +       if (IS_ERR(zcrtc->primary)) {
> +               ret = PTR_ERR(zcrtc->primary);
> +               dev_err(dev, "failed to init primary plane: %d\n", ret);
> +               return ret;
> +       }
> +
> +       ret = drm_crtc_init_with_planes(drm, &zcrtc->crtc, zcrtc->primary, NULL,
> +                                       &zx_crtc_funcs, NULL);
> +       if (ret) {
> +               dev_err(dev, "failed to init drm crtc: %d\n", ret);
> +               return ret;
> +       }
> +
> +       drm_crtc_helper_add(&zcrtc->crtc, &zx_crtc_helper_funcs);
> +
> +       if (chn_type == VOU_CHN_MAIN)
> +               vou->main_crtc = zcrtc;
> +       else
> +               vou->aux_crtc = zcrtc;
> +
> +       return 0;
> +}
> +
> +static inline struct drm_crtc *zx_find_crtc(struct drm_device *drm, int pipe)
> +{
> +       struct drm_crtc *crtc;
> +       int i = 0;
> +
> +       list_for_each_entry(crtc, &drm->mode_config.crtc_list, head)
> +               if (i++ == pipe)
> +                       return crtc;
> +
> +       return NULL;
> +}

We have drm_plane_from_index, it seems like at least 2 drivers would
benefit from drm_crtc_from_index. Either way, you should probably
change this code to compare pipe to crtc->index instead of rolling
your own index counter.

> +
> +int zx_vou_enable_vblank(struct drm_device *drm, unsigned int pipe)
> +{
> +       struct drm_crtc *crtc;
> +       struct zx_vou_hw *vou;
> +
> +       crtc = zx_find_crtc(drm, pipe);
> +       if (!crtc)
> +               return 0;
> +
> +       vou = crtc_to_vou(crtc);
> +
> +       if (pipe == 0)
> +               zx_writel_mask(vou->timing + TIMING_INT_CTRL,
> +                              TIMING_INT_MAIN_FRAME, TIMING_INT_MAIN_FRAME);
> +       else
> +               zx_writel_mask(vou->timing + TIMING_INT_CTRL,
> +                              TIMING_INT_AUX_FRAME, TIMING_INT_AUX_FRAME);
> +

It seems like this could also benefit from crtc_bits/crtc_regs

> +       return 0;
> +}
> +
> +void zx_vou_disable_vblank(struct drm_device *drm, unsigned int pipe)
> +{
> +       struct drm_crtc *crtc;
> +       struct zx_vou_hw *vou;
> +
> +       crtc = zx_find_crtc(drm, pipe);
> +       if (!crtc)
> +               return;
> +
> +       vou = crtc_to_vou(crtc);
> +
> +       if (pipe == 0)
> +               zx_writel_mask(vou->timing + TIMING_INT_CTRL,
> +                              TIMING_INT_MAIN_FRAME, 0);
> +       else
> +               zx_writel_mask(vou->timing + TIMING_INT_CTRL,
> +                              TIMING_INT_AUX_FRAME, 0);
> +}
> +
> +static irqreturn_t vou_irq_handler(int irq, void *dev_id)
> +{
> +       struct zx_vou_hw *vou = dev_id;
> +       u32 state;
> +
> +       /* Handle TIMING_CTRL frame interrupts */
> +       state = zx_readl(vou->timing + TIMING_INT_STATE);
> +       zx_writel(vou->timing + TIMING_INT_STATE, state);
> +
> +       if (state & TIMING_INT_MAIN_FRAME)
> +               drm_crtc_handle_vblank(&vou->main_crtc->crtc);
> +
> +       if (state & TIMING_INT_AUX_FRAME)
> +               drm_crtc_handle_vblank(&vou->aux_crtc->crtc);
> +
> +       /* Handle OSD interrupts */
> +       state = zx_readl(vou->osd + OSD_INT_STA);
> +       zx_writel(vou->osd + OSD_INT_CLRSTA, state);
> +
> +       if (state & OSD_INT_MAIN_UPT) {
> +               vou_chn_set_update(vou->main_crtc);
> +               zx_plane_set_update(vou->main_crtc->primary);
> +       }
> +
> +       if (state & OSD_INT_AUX_UPT) {
> +               vou_chn_set_update(vou->aux_crtc);
> +               zx_plane_set_update(vou->aux_crtc->primary);
> +       }
> +
> +       if (state & OSD_INT_ERROR)
> +               dev_err(vou->dev, "OSD ERROR: 0x%08x!\n", state);
> +
> +       return IRQ_HANDLED;
> +}
> +
> +static void vou_dtrc_init(struct zx_vou_hw *vou)
> +{
> +       /* Clear bit for bypass by ID */
> +       zx_writel_mask(vou->dtrc + DTRC_DETILE_CTRL,
> +                      TILE2RASTESCAN_BYPASS_MODE, 0);
> +
> +       /* Select ARIDR mode */
> +       zx_writel_mask(vou->dtrc + DTRC_DETILE_CTRL, DETILE_ARIDR_MODE_MASK,
> +                      DETILE_ARID_IN_ARIDR);
> +
> +       /* Bypass decompression for both frames */
> +       zx_writel_mask(vou->dtrc + DTRC_F0_CTRL, DTRC_DECOMPRESS_BYPASS,
> +                      DTRC_DECOMPRESS_BYPASS);
> +       zx_writel_mask(vou->dtrc + DTRC_F1_CTRL, DTRC_DECOMPRESS_BYPASS,
> +                      DTRC_DECOMPRESS_BYPASS);
> +
> +       /* Set up ARID register */
> +       zx_writel(vou->dtrc + DTRC_ARID, DTRC_ARID3(0xf) | DTRC_ARID2(0xe) |
> +                 DTRC_ARID1(0xf) | DTRC_ARID0(0xe));
> +}
> +
> +static void vou_hw_init(struct zx_vou_hw *vou)
> +{
> +       /* Set GL0 to main channel and GL1 to aux channel */
> +       zx_writel_mask(vou->osd + OSD_CTRL0, OSD_CTRL0_GL0_SEL, 0);
> +       zx_writel_mask(vou->osd + OSD_CTRL0, OSD_CTRL0_GL1_SEL,
> +                      OSD_CTRL0_GL1_SEL);
> +
> +       /* Release reset for all VOU modules */
> +       zx_writel(vou->vouctl + VOU_SOFT_RST, ~0);
> +
> +       /* Select main clock for GL0 and aux clock for GL1 module */
> +       zx_writel_mask(vou->vouctl + VOU_CLK_SEL, VOU_CLK_GL0_SEL, 0);
> +       zx_writel_mask(vou->vouctl + VOU_CLK_SEL, VOU_CLK_GL1_SEL,
> +                      VOU_CLK_GL1_SEL);
> +
> +       /* Enable clock auto-gating for all VOU modules */
> +       zx_writel(vou->vouctl + VOU_CLK_REQEN, ~0);
> +
> +       /* Enable all VOU module clocks */
> +       zx_writel(vou->vouctl + VOU_CLK_EN, ~0);
> +
> +       /* Clear both OSD and TIMING_CTRL interrupt state */
> +       zx_writel(vou->osd + OSD_INT_CLRSTA, ~0);
> +       zx_writel(vou->timing + TIMING_INT_STATE, ~0);
> +
> +       /* Enable OSD and TIMING_CTRL interrrupts */
> +       zx_writel(vou->osd + OSD_INT_MSK, OSD_INT_ENABLE);
> +       zx_writel(vou->timing + TIMING_INT_CTRL, TIMING_INT_ENABLE);
> +
> +       /* Select GPC as input to gl/vl scaler as a sane default setting */
> +       zx_writel(vou->otfppu + OTFPPU_RSZ_DATA_SOURCE, 0x2a);
> +
> +       /*
> +        * Needs to reset channel and layer logic per frame when frame starts
> +        * to get VOU work properly.
> +        */
> +       zx_writel_mask(vou->osd + OSD_RST_CLR, RST_PER_FRAME, RST_PER_FRAME);
> +
> +       vou_dtrc_init(vou);
> +}
> +
> +static int zx_crtc_bind(struct device *dev, struct device *master, void *data)
> +{
> +       struct platform_device *pdev = to_platform_device(dev);
> +       struct drm_device *drm = data;
> +       struct zx_vou_hw *vou;
> +       struct resource *res;
> +       int irq;
> +       int ret;
> +
> +       vou = devm_kzalloc(dev, sizeof(*vou), GFP_KERNEL);
> +       if (!vou)
> +               return -ENOMEM;
> +
> +       res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "osd");
> +       vou->osd = devm_ioremap_resource(dev, res);
> +       if (IS_ERR(vou->osd)) {
> +               ret = PTR_ERR(vou->osd);
> +               dev_err(dev, "failed to remap osd region: %d\n", ret);
> +               return ret;
> +       }
> +
> +       res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "timing_ctrl");
> +       vou->timing = devm_ioremap_resource(dev, res);
> +       if (IS_ERR(vou->timing)) {
> +               ret = PTR_ERR(vou->timing);
> +               dev_err(dev, "failed to remap timing_ctrl region: %d\n", ret);
> +               return ret;
> +       }
> +
> +       res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dtrc");
> +       vou->dtrc = devm_ioremap_resource(dev, res);
> +       if (IS_ERR(vou->dtrc)) {
> +               ret = PTR_ERR(vou->dtrc);
> +               dev_err(dev, "failed to remap dtrc region: %d\n", ret);
> +               return ret;
> +       }
> +
> +       res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "vou_ctrl");
> +       vou->vouctl = devm_ioremap_resource(dev, res);
> +       if (IS_ERR(vou->vouctl)) {
> +               ret = PTR_ERR(vou->vouctl);
> +               dev_err(dev, "failed to remap vou_ctrl region: %d\n", ret);
> +               return ret;
> +       }
> +
> +       res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "otfppu");
> +       vou->otfppu = devm_ioremap_resource(dev, res);
> +       if (IS_ERR(vou->otfppu)) {
> +               ret = PTR_ERR(vou->otfppu);
> +               dev_err(dev, "failed to remap otfppu region: %d\n", ret);
> +               return ret;
> +       }
> +
> +       irq = platform_get_irq(pdev, 0);
> +       if (irq < 0)
> +               return irq;
> +
> +       vou->axi_clk = devm_clk_get(dev, "aclk");
> +       if (IS_ERR(vou->axi_clk)) {
> +               ret = PTR_ERR(vou->axi_clk);
> +               dev_err(dev, "failed to get axi_clk: %d\n", ret);
> +               return ret;
> +       }
> +
> +       vou->ppu_clk = devm_clk_get(dev, "ppu_wclk");
> +       if (IS_ERR(vou->ppu_clk)) {
> +               ret = PTR_ERR(vou->ppu_clk);
> +               dev_err(dev, "failed to get ppu_clk: %d\n", ret);
> +               return ret;
> +       }
> +
> +       ret = clk_prepare_enable(vou->axi_clk);
> +       if (ret) {
> +               dev_err(dev, "failed to enable axi_clk: %d\n", ret);
> +               return ret;
> +       }
> +
> +       clk_prepare_enable(vou->ppu_clk);
> +       if (ret) {
> +               dev_err(dev, "failed to enable ppu_clk: %d\n", ret);
> +               goto disable_axi_clk;
> +       }
> +
> +       vou->dev = dev;
> +       dev_set_drvdata(dev, vou);
> +
> +       vou_hw_init(vou);
> +
> +       ret = devm_request_irq(dev, irq, vou_irq_handler, 0, "zx_vou", vou);
> +       if (ret < 0) {
> +               dev_err(dev, "failed to request vou irq: %d\n", ret);
> +               goto disable_ppu_clk;
> +       }
> +
> +       ret = zx_crtc_init(drm, vou, VOU_CHN_MAIN);
> +       if (ret) {
> +               dev_err(dev, "failed to init main channel crtc: %d\n", ret);
> +               goto disable_ppu_clk;
> +       }
> +
> +       ret = zx_crtc_init(drm, vou, VOU_CHN_AUX);
> +       if (ret) {
> +               dev_err(dev, "failed to init aux channel crtc: %d\n", ret);
> +               goto disable_ppu_clk;
> +       }
> +
> +       return 0;
> +
> +disable_ppu_clk:
> +       clk_disable_unprepare(vou->ppu_clk);
> +disable_axi_clk:
> +       clk_disable_unprepare(vou->axi_clk);
> +       return ret;
> +}
> +
> +static void zx_crtc_unbind(struct device *dev, struct device *master,
> +                          void *data)
> +{
> +       struct zx_vou_hw *vou = dev_get_drvdata(dev);
> +
> +       clk_disable_unprepare(vou->axi_clk);
> +       clk_disable_unprepare(vou->ppu_clk);
> +}
> +
> +static const struct component_ops zx_crtc_component_ops = {
> +       .bind = zx_crtc_bind,
> +       .unbind = zx_crtc_unbind,
> +};
> +
> +static int zx_crtc_probe(struct platform_device *pdev)
> +{
> +       return component_add(&pdev->dev, &zx_crtc_component_ops);
> +}
> +
> +static int zx_crtc_remove(struct platform_device *pdev)
> +{
> +       component_del(&pdev->dev, &zx_crtc_component_ops);
> +       return 0;
> +}
> +
> +static const struct of_device_id zx_crtc_of_match[] = {
> +       { .compatible = "zte,zx296718-dpc", },
> +       { /* end */ },
> +};
> +MODULE_DEVICE_TABLE(of, zx_crtc_of_match);
> +
> +struct platform_driver zx_crtc_driver = {
> +       .probe = zx_crtc_probe,
> +       .remove = zx_crtc_remove,
> +       .driver = {
> +               .name = "zx-crtc",
> +               .of_match_table = zx_crtc_of_match,
> +       },
> +};
> diff --git a/drivers/gpu/drm/zte/zx_vou.h b/drivers/gpu/drm/zte/zx_vou.h
> new file mode 100644
> index 000000000000..349e06cd86f4
> --- /dev/null
> +++ b/drivers/gpu/drm/zte/zx_vou.h
> @@ -0,0 +1,46 @@
> +/*
> + * Copyright 2016 Linaro Ltd.
> + * Copyright 2016 ZTE Corporation.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + */
> +
> +#ifndef __ZX_VOU_H__
> +#define __ZX_VOU_H__
> +
> +#define VOU_CRTC_MASK          0x3
> +
> +/* VOU output interfaces */
> +enum vou_inf_id {
> +       VOU_HDMI        = 0,
> +       VOU_RGB_LCD     = 1,
> +       VOU_TV_ENC      = 2,
> +       VOU_MIPI_DSI    = 3,
> +       VOU_LVDS        = 4,
> +       VOU_VGA         = 5,
> +};
> +
> +enum vou_inf_data_sel {
> +       VOU_YUV444      = 0,
> +       VOU_RGB_101010  = 1,
> +       VOU_RGB_888     = 2,
> +       VOU_RGB_666     = 3,
> +};
> +
> +struct vou_inf {
> +       enum vou_inf_id id;
> +       enum vou_inf_data_sel data_sel;
> +       u32 clocks_en_bits;
> +       u32 clocks_sel_bits;
> +};
> +
> +void vou_inf_enable(const struct vou_inf *inf, struct drm_crtc *crtc);
> +void vou_inf_disable(const struct vou_inf *inf, struct drm_crtc *crtc);
> +
> +int zx_vou_enable_vblank(struct drm_device *drm, unsigned int pipe);
> +void zx_vou_disable_vblank(struct drm_device *drm, unsigned int pipe);
> +
> +#endif /* __ZX_VOU_H__ */
> --
> 1.9.1
>
Shawn Guo Oct. 27, 2016, 2:42 p.m. UTC | #3
> On Thu, Oct 20, 2016 at 3:30 AM, Shawn Guo <shawn.guo@linaro.org> wrote:
> > It adds the initial ZTE VOU display controller DRM driver.  There are
> > still some features to be added, like overlay plane, scaling, and more
> > output devices support.  But it's already useful with dual CRTCs and
> > HDMI monitor working.
> >
> > Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

<snip>

> > +static int zx_drm_bind(struct device *dev)
> > +{
> > +       struct drm_device *drm;
> > +       struct zx_drm_private *priv;
> > +       int ret;
> > +
> > +       priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
> > +       if (!priv)
> > +               return -ENOMEM;
> > +
> > +       drm = drm_dev_alloc(&zx_drm_driver, dev);
> > +       if (!drm)
> > +               return -ENOMEM;
> > +
> > +       drm->dev_private = priv;
> > +       dev_set_drvdata(dev, drm);
> > +
> > +       drm_mode_config_init(drm);
> > +       drm->mode_config.min_width = 16;
> > +       drm->mode_config.min_height = 16;
> > +       drm->mode_config.max_width = 4096;
> > +       drm->mode_config.max_height = 4096;
> > +       drm->mode_config.funcs = &zx_drm_mode_config_funcs;
> > +
> > +       ret = component_bind_all(dev, drm);
> > +       if (ret) {
> > +               dev_err(dev, "failed to bind all components: %d\n", ret);
> 
> Consider using the new DRM_DEV_* messages instead of the plain old dev_*

Okay, I will switch to DRM_DEV_* for log messages.

> 
> > +               goto out_unregister;
> > +       }
> > +
> > +       ret = drm_vblank_init(drm, drm->mode_config.num_crtc);
> > +       if (ret < 0) {
> > +               dev_err(dev, "failed to init vblank: %d\n", ret);
> > +               goto out_unbind;
> > +       }
> > +
> > +       /*
> > +        * We will manage irq handler on our own.  In this case, irq_enabled
> > +        * need to be true for using vblank core support.
> > +        */
> > +       drm->irq_enabled = true;
> > +
> > +       drm_mode_config_reset(drm);
> > +       drm_kms_helper_poll_init(drm);
> > +
> > +       priv->fbdev = drm_fbdev_cma_init(drm, 32, drm->mode_config.num_crtc,
> > +                                        drm->mode_config.num_connector);
> > +       if (IS_ERR(priv->fbdev)) {
> > +               ret = PTR_ERR(priv->fbdev);
> > +               dev_err(dev, "failed to init cma fbdev: %d\n", ret);
> > +               priv->fbdev = NULL;
> > +               goto out_poll_fini;
> > +       }
> > +
> > +       ret = drm_dev_register(drm, 0);
> > +       if (ret)
> > +               goto out_fbdev_fini;
> > +
> > +       return 0;
> > +
> > +out_fbdev_fini:
> > +       if (priv->fbdev) {
> > +               drm_fbdev_cma_fini(priv->fbdev);
> > +               priv->fbdev = NULL;
> > +       }
> > +out_poll_fini:
> > +       drm_kms_helper_poll_fini(drm);
> > +       drm_mode_config_cleanup(drm);
> > +       drm_vblank_cleanup(drm);
> > +out_unbind:
> > +       component_unbind_all(dev, drm);
> > +out_unregister:
> > +       dev_set_drvdata(dev, NULL);
> > +       drm->dev_private = NULL;
> > +       drm_dev_unref(drm);
> > +       return ret;
> > +}

<snip>

> > +static int zx_hdmi_i2c_read(struct zx_hdmi *hdmi, struct i2c_msg *msg)
> > +{
> > +       int len = msg->len;
> > +       u8 *buf = msg->buf;
> > +       int retry = 0;
> > +       int ret = 0;
> > +
> > +       /* Bits [9:8] of bytes */
> > +       hdmi_writeb(hdmi, ZX_DDC_DIN_CNT2, (len >> 8) & 0xff);
> > +       /* Bits [7:0] of bytes */
> > +       hdmi_writeb(hdmi, ZX_DDC_DIN_CNT1, len & 0xff);
> > +
> > +       /* Clear FIFO */
> > +       hdmi_writeb_mask(hdmi, ZX_DDC_CMD, DDC_CMD_MASK, DDC_CMD_CLEAR_FIFO);
> > +
> > +       /* Kick off the read */
> > +       hdmi_writeb_mask(hdmi, ZX_DDC_CMD, DDC_CMD_MASK,
> > +                        DDC_CMD_SEQUENTIAL_READ);
> > +
> > +       while (len > 0) {
> > +               int cnt, i;
> > +
> > +               /* FIFO needs some time to get ready */
> > +               usleep_range(500, 1000);
> > +
> > +               cnt = hdmi_readb(hdmi, ZX_DDC_DOUT_CNT) & DDC_DOUT_CNT_MASK;
> > +               if (cnt == 0) {
> > +                       if (++retry > 5) {
> > +                               dev_err(hdmi->dev, "DDC FIFO read timed out!");
> > +                               ret = -ETIMEDOUT;
> > +                               break;
> 
> Why not just return -ETIMEDOUT here?

Yes.  Stupid me.

> > +                       }
> > +                       continue;
> > +               }
> > +
> > +               for (i = 0; i < cnt; i++)
> > +                       *buf++ = hdmi_readb(hdmi, ZX_DDC_DATA);
> > +               len -= cnt;
> > +       }
> > +
> > +       return ret;
> > +}

<snip>

> > +static int zx_hdmi_bind(struct device *dev, struct device *master, void *data)
> > +{
> > +       struct platform_device *pdev = to_platform_device(dev);
> > +       struct drm_device *drm = data;
> > +       struct resource *res;
> > +       struct zx_hdmi *hdmi;
> > +       int irq;
> > +       int ret;
> > +
> > +       hdmi = devm_kzalloc(dev, sizeof(*hdmi), GFP_KERNEL);
> > +       if (!hdmi)
> > +               return -ENOMEM;
> > +
> > +       hdmi->dev = dev;
> > +       hdmi->drm = drm;
> > +       hdmi->inf = &vou_inf_hdmi;
> > +
> > +       dev_set_drvdata(dev, hdmi);
> > +
> > +       res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> > +       hdmi->mmio = devm_ioremap_resource(dev, res);
> > +       if (IS_ERR(hdmi->mmio)) {
> > +               ret = PTR_ERR(hdmi->mmio);
> > +               dev_err(dev, "failed to remap hdmi region: %d\n", ret);
> > +               return ret;
> > +       }
> > +
> > +       irq = platform_get_irq(pdev, 0);
> > +       if (irq < 0)
> > +               return irq;
> > +
> > +       hdmi->cec_clk = devm_clk_get(hdmi->dev, "osc_cec");
> > +       if (IS_ERR(hdmi->cec_clk)) {
> > +               ret = PTR_ERR(hdmi->cec_clk);
> > +               dev_err(dev, "failed to get cec_clk: %d\n", ret);
> > +               return ret;
> > +       }
> > +
> > +       hdmi->osc_clk = devm_clk_get(hdmi->dev, "osc_clk");
> > +       if (IS_ERR(hdmi->osc_clk)) {
> > +               ret = PTR_ERR(hdmi->osc_clk);
> > +               dev_err(dev, "failed to get osc_clk: %d\n", ret);
> > +               return ret;
> > +       }
> > +
> > +       hdmi->xclk = devm_clk_get(hdmi->dev, "xclk");
> > +       if (IS_ERR(hdmi->xclk)) {
> > +               ret = PTR_ERR(hdmi->xclk);
> > +               dev_err(dev, "failed to get xclk: %d\n", ret);
> > +               return ret;
> > +       }
> > +
> > +       zx_hdmi_hw_init(hdmi);
> > +
> > +       ret = clk_prepare_enable(hdmi->cec_clk);
> > +       if (ret) {
> > +               dev_err(dev, "failed to enable cec_clk: %d\n", ret);
> > +               return ret;
> > +       }
> > +
> > +       ret = clk_prepare_enable(hdmi->osc_clk);
> > +       if (ret) {
> > +               dev_err(dev, "failed to enable osc_clk: %d\n", ret);
> > +               goto disable_cec_clk;
> > +       }
> > +
> > +       ret = clk_prepare_enable(hdmi->xclk);
> > +       if (ret) {
> > +               dev_err(dev, "failed to enable xclk: %d\n", ret);
> > +               goto disable_osc_clk;
> > +       }
> 
> Perhaps add a TODO above hdmi_hw_init() to move it and the clock
> enables to .enable and conversely implement .disable?

Instead of leaving a TODO item there, I would like to change it right
away in the next version.

> > +
> > +
> > +       ret = zx_hdmi_ddc_register(hdmi);
> > +       if (ret) {
> > +               dev_err(dev, "failed to register ddc: %d\n", ret);
> > +               goto disable_xclk;
> > +       }
> > +
> > +       ret = zx_hdmi_register(drm, hdmi);
> > +       if (ret) {
> > +               dev_err(dev, "failed to register hdmi: %d\n", ret);
> > +               goto disable_xclk;
> > +       }
> > +
> > +       ret = devm_request_threaded_irq(dev, irq, zx_hdmi_irq_handler,
> > +                                       zx_hdmi_irq_thread, IRQF_SHARED,
> > +                                       dev_name(dev), hdmi);
> > +       if (ret) {
> > +               dev_err(dev, "failed to request threaded irq: %d\n", ret);
> > +               goto disable_xclk;
> > +       }
> > +
> > +       return 0;
> > +
> > +disable_xclk:
> > +       clk_disable_unprepare(hdmi->xclk);
> > +disable_osc_clk:
> > +       clk_disable_unprepare(hdmi->osc_clk);
> > +disable_cec_clk:
> > +       clk_disable_unprepare(hdmi->cec_clk);
> > +       return ret;
> > +}

<snip>

> > +static int zx_gl_plane_atomic_check(struct drm_plane *plane,
> > +                                   struct drm_plane_state *plane_state)
> > +{
> > +       struct drm_framebuffer *fb = plane_state->fb;
> > +       struct drm_crtc *crtc = plane_state->crtc;
> > +       struct drm_crtc_state *crtc_state;
> > +       struct drm_rect clip;
> > +
> > +       if (!crtc || !fb)
> > +               return 0;
> > +
> > +       crtc_state = drm_atomic_get_existing_crtc_state(plane_state->state,
> > +                                                       crtc);
> > +       if (WARN_ON(!crtc_state))
> > +               return -EINVAL;
> > +
> > +       /* plane must match crtc enable state */
> > +       if (crtc_state->enable != !!plane_state->crtc)
> > +               return -EINVAL;
> > +
> > +       /* nothing to check when disabling or disabled */
> > +       if (!crtc_state->enable)
> > +               return 0;
> 
> I think you can shuffle things around here to read a bit clearer:
> 
> if (!crtc_state->enable)
>         return 0;
> 
> if (!plane_state->crtc)
>         return -EINVAL

Indeed.

> > +
> > +       clip.x1 = 0;
> > +       clip.y1 = 0;
> > +       clip.x2 = crtc_state->adjusted_mode.hdisplay;
> > +       clip.y2 = crtc_state->adjusted_mode.vdisplay;
> > +
> > +       return drm_plane_helper_check_state(plane_state, &clip,
> > +                                           DRM_PLANE_HELPER_NO_SCALING,
> > +                                           DRM_PLANE_HELPER_NO_SCALING,
> > +                                           false, true);
> > +}

<snip>

> > +/* Sub-module offset */
> > +#define MAIN_GL_OFFSET                 0x130
> > +#define MAIN_CSC_OFFSET                        0x580
> > +#define MAIN_HBSC_OFFSET               0x820
> > +#define MAIN_RSZ_OFFSET                        0x600 /* OTFPPU sub-module */
> > +
> > +#define AUX_GL_OFFSET                  0x200
> > +#define AUX_CSC_OFFSET                 0x5d0
> > +#define AUX_HBSC_OFFSET                        0x860
> > +#define AUX_RSZ_OFFSET                 0x800
> > +
> > +/* OSD (GPC_GLOBAL) registers */
> > +#define OSD_INT_STA                    0x04
> > +#define OSD_INT_CLRSTA                 0x08
> > +#define OSD_INT_MSK                    0x0c
> > +#define OSD_INT_AUX_UPT                        BIT(14)
> > +#define OSD_INT_MAIN_UPT               BIT(13)
> > +#define OSD_INT_GL1_LBW                        BIT(10)
> > +#define OSD_INT_GL0_LBW                        BIT(9)
> > +#define OSD_INT_VL2_LBW                        BIT(8)
> > +#define OSD_INT_VL1_LBW                        BIT(7)
> > +#define OSD_INT_VL0_LBW                        BIT(6)
> > +#define OSD_INT_BUS_ERR                        BIT(3)
> > +#define OSD_INT_CFG_ERR                        BIT(2)
> > +#define OSD_INT_ERROR (\
> > +       OSD_INT_GL1_LBW | OSD_INT_GL0_LBW | \
> > +       OSD_INT_VL2_LBW | OSD_INT_VL1_LBW | OSD_INT_VL0_LBW | \
> > +       OSD_INT_BUS_ERR | OSD_INT_CFG_ERR \
> > +)
> > +#define OSD_INT_ENABLE (OSD_INT_ERROR | OSD_INT_AUX_UPT | OSD_INT_MAIN_UPT)
> > +#define OSD_CTRL0                      0x10
> > +#define OSD_CTRL0_GL0_EN               BIT(7)
> > +#define OSD_CTRL0_GL0_SEL              BIT(6)
> > +#define OSD_CTRL0_GL1_EN               BIT(5)
> > +#define OSD_CTRL0_GL1_SEL              BIT(4)
> > +#define OSD_RST_CLR                    0x1c
> > +#define RST_PER_FRAME                  BIT(19)
> > +
> > +/* Main/Aux channel registers */
> > +#define OSD_MAIN_CHN                   0x470
> > +#define OSD_AUX_CHN                    0x4d0
> > +#define CHN_CTRL0                      0x00
> > +#define CHN_ENABLE                     BIT(0)
> > +#define CHN_CTRL1                      0x04
> > +#define CHN_SCREEN_W_SHIFT             18
> > +#define CHN_SCREEN_W_MASK              (0x1fff << CHN_SCREEN_W_SHIFT)
> > +#define CHN_SCREEN_H_SHIFT             5
> > +#define CHN_SCREEN_H_MASK              (0x1fff << CHN_SCREEN_H_SHIFT)
> > +#define CHN_UPDATE                     0x08
> > +
> > +/* TIMING_CTRL registers */
> > +#define TIMING_TC_ENABLE               0x04
> > +#define AUX_TC_EN                      BIT(1)
> > +#define MAIN_TC_EN                     BIT(0)
> > +#define FIR_MAIN_ACTIVE                        0x08
> > +#define FIR_AUX_ACTIVE                 0x0c
> > +#define V_ACTIVE_SHIFT                 16
> > +#define V_ACTIVE_MASK                  (0xffff << V_ACTIVE_SHIFT)
> > +#define H_ACTIVE_SHIFT                 0
> > +#define H_ACTIVE_MASK                  (0xffff << H_ACTIVE_SHIFT)
> > +#define FIR_MAIN_H_TIMING              0x10
> > +#define FIR_MAIN_V_TIMING              0x14
> > +#define FIR_AUX_H_TIMING               0x18
> > +#define FIR_AUX_V_TIMING               0x1c
> > +#define SYNC_WIDE_SHIFT                        22
> > +#define SYNC_WIDE_MASK                 (0x3ff << SYNC_WIDE_SHIFT)
> > +#define BACK_PORCH_SHIFT               11
> > +#define BACK_PORCH_MASK                        (0x7ff << BACK_PORCH_SHIFT)
> > +#define FRONT_PORCH_SHIFT              0
> > +#define FRONT_PORCH_MASK               (0x7ff << FRONT_PORCH_SHIFT)
> > +#define TIMING_CTRL                    0x20
> > +#define AUX_POL_SHIFT                  3
> > +#define AUX_POL_MASK                   (0x7 << AUX_POL_SHIFT)
> > +#define MAIN_POL_SHIFT                 0
> > +#define MAIN_POL_MASK                  (0x7 << MAIN_POL_SHIFT)
> > +#define POL_DE_SHIFT                   2
> > +#define POL_VSYNC_SHIFT                        1
> > +#define POL_HSYNC_SHIFT                        0
> > +#define TIMING_INT_CTRL                        0x24
> > +#define TIMING_INT_STATE               0x28
> > +#define TIMING_INT_AUX_FRAME           BIT(3)
> > +#define TIMING_INT_MAIN_FRAME          BIT(1)
> > +#define TIMING_INT_AUX_FRAME_SEL_VSW   (0x2 << 10)
> > +#define TIMING_INT_MAIN_FRAME_SEL_VSW  (0x2 << 6)
> > +#define TIMING_INT_ENABLE (\
> > +       TIMING_INT_MAIN_FRAME_SEL_VSW | TIMING_INT_AUX_FRAME_SEL_VSW | \
> > +       TIMING_INT_MAIN_FRAME | TIMING_INT_AUX_FRAME \
> > +)
> > +#define TIMING_MAIN_SHIFT              0x2c
> > +#define TIMING_AUX_SHIFT               0x30
> > +#define H_SHIFT_VAL                    0x0048
> > +#define TIMING_MAIN_PI_SHIFT           0x68
> > +#define TIMING_AUX_PI_SHIFT            0x6c
> > +#define H_PI_SHIFT_VAL                 0x000f
> > +
> > +#define V_ACTIVE(x)    (((x) << V_ACTIVE_SHIFT) & V_ACTIVE_MASK)
> > +#define H_ACTIVE(x)    (((x) << H_ACTIVE_SHIFT) & H_ACTIVE_MASK)
> > +
> > +#define SYNC_WIDE(x)   (((x) << SYNC_WIDE_SHIFT) & SYNC_WIDE_MASK)
> > +#define BACK_PORCH(x)  (((x) << BACK_PORCH_SHIFT) & BACK_PORCH_MASK)
> > +#define FRONT_PORCH(x) (((x) << FRONT_PORCH_SHIFT) & FRONT_PORCH_MASK)
> > +
> > +/* DTRC registers */
> > +#define DTRC_F0_CTRL                   0x2c
> > +#define DTRC_F1_CTRL                   0x5c
> > +#define DTRC_DECOMPRESS_BYPASS         BIT(17)
> > +#define DTRC_DETILE_CTRL               0x68
> > +#define TILE2RASTESCAN_BYPASS_MODE     BIT(30)
> > +#define DETILE_ARIDR_MODE_MASK         (0x3 << 0)
> > +#define DETILE_ARID_ALL                        0
> > +#define DETILE_ARID_IN_ARIDR           1
> > +#define DETILE_ARID_BYP_BUT_ARIDR      2
> > +#define DETILE_ARID_IN_ARIDR2          3
> > +#define DTRC_ARID                      0x6c
> > +#define DTRC_ARID3_SHIFT               24
> > +#define DTRC_ARID3_MASK                        (0xff << DTRC_ARID3_SHIFT)
> > +#define DTRC_ARID2_SHIFT               16
> > +#define DTRC_ARID2_MASK                        (0xff << DTRC_ARID2_SHIFT)
> > +#define DTRC_ARID1_SHIFT               8
> > +#define DTRC_ARID1_MASK                        (0xff << DTRC_ARID1_SHIFT)
> > +#define DTRC_ARID0_SHIFT               0
> > +#define DTRC_ARID0_MASK                        (0xff << DTRC_ARID0_SHIFT)
> > +#define DTRC_DEC2DDR_ARID              0x70
> > +
> > +#define DTRC_ARID3(x)  (((x) << DTRC_ARID3_SHIFT) & DTRC_ARID3_MASK)
> > +#define DTRC_ARID2(x)  (((x) << DTRC_ARID2_SHIFT) & DTRC_ARID2_MASK)
> > +#define DTRC_ARID1(x)  (((x) << DTRC_ARID1_SHIFT) & DTRC_ARID1_MASK)
> > +#define DTRC_ARID0(x)  (((x) << DTRC_ARID0_SHIFT) & DTRC_ARID0_MASK)
> > +
> > +/* VOU_CTRL registers */
> > +#define VOU_INF_EN                     0x00
> > +#define VOU_INF_CH_SEL                 0x04
> > +#define VOU_INF_DATA_SEL               0x08
> > +#define VOU_SOFT_RST                   0x14
> > +#define VOU_CLK_SEL                    0x18
> > +#define VOU_CLK_GL1_SEL                        BIT(5)
> > +#define VOU_CLK_GL0_SEL                        BIT(4)
> > +#define VOU_CLK_REQEN                  0x20
> > +#define VOU_CLK_EN                     0x24
> > +
> > +/* OTFPPU_CTRL registers */
> > +#define OTFPPU_RSZ_DATA_SOURCE         0x04
> > +
> 
> I find the register definitions pretty distracting here (and elsewhere
> in the driver), I suppose my personal preference would be to hide them
> in the headers.

I do not have a strong preference on this.  Okay, will do that to make
it easier for you to look at the driver :)

> > +#define GL_NUM                         2
> > +#define VL_NUM                         3
> > +
> > +enum vou_chn_type {
> > +       VOU_CHN_MAIN,
> > +       VOU_CHN_AUX,
> > +};
> > +
> > +struct zx_crtc_regs {
> > +       u32 fir_active;
> > +       u32 fir_htiming;
> > +       u32 fir_vtiming;
> > +       u32 timing_shift;
> > +       u32 timing_pi_shift;
> > +};

<snip>

> > +static inline struct drm_crtc *zx_find_crtc(struct drm_device *drm, int pipe)
> > +{
> > +       struct drm_crtc *crtc;
> > +       int i = 0;
> > +
> > +       list_for_each_entry(crtc, &drm->mode_config.crtc_list, head)
> > +               if (i++ == pipe)
> > +                       return crtc;
> > +
> > +       return NULL;
> > +}
> 
> We have drm_plane_from_index, it seems like at least 2 drivers would
> benefit from drm_crtc_from_index. Either way, you should probably
> change this code to compare pipe to crtc->index instead of rolling
> your own index counter.

Right.  I will change it to use crtc->index at this point.  And after
the driver gets landed, I will cook up a patch for drm_crtc_from_index.

> > +int zx_vou_enable_vblank(struct drm_device *drm, unsigned int pipe)
> > +{
> > +       struct drm_crtc *crtc;
> > +       struct zx_vou_hw *vou;
> > +
> > +       crtc = zx_find_crtc(drm, pipe);
> > +       if (!crtc)
> > +               return 0;
> > +
> > +       vou = crtc_to_vou(crtc);
> > +
> > +       if (pipe == 0)
> > +               zx_writel_mask(vou->timing + TIMING_INT_CTRL,
> > +                              TIMING_INT_MAIN_FRAME, TIMING_INT_MAIN_FRAME);
> > +       else
> > +               zx_writel_mask(vou->timing + TIMING_INT_CTRL,
> > +                              TIMING_INT_AUX_FRAME, TIMING_INT_AUX_FRAME);
> > +
> 
> It seems like this could also benefit from crtc_bits/crtc_regs

Yes, you're right.

Thanks for all the comments.

Shawn

> > +       return 0;
> > +}
Shawn Guo Oct. 27, 2016, 3:32 p.m. UTC | #4
Hi Gustavo,

Thanks for looking at the patch.

> 2016-10-20 Shawn Guo <shawn.guo@linaro.org>:
> 
> > It adds the initial ZTE VOU display controller DRM driver.  There are
> > still some features to be added, like overlay plane, scaling, and more
> > output devices support.  But it's already useful with dual CRTCs and
> > HDMI monitor working.
> >
> > Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

<snip>

> > +static void zx_hdmi_connector_destroy(struct drm_connector *connector)
> > +{
> > +     drm_connector_unregister(connector);
> 
> drm_connector_unregister() is not needed anymore. DRM core will call it
> for you.
> 
> > +     drm_connector_cleanup(connector);
> > +}
> > +
> > +static const struct drm_connector_funcs zx_hdmi_connector_funcs = {
> > +     .dpms = drm_atomic_helper_connector_dpms,
> > +     .fill_modes = drm_helper_probe_single_connector_modes,
> > +     .detect = zx_hdmi_connector_detect,
> > +     .destroy = zx_hdmi_connector_destroy,
> 
> Then here you can use drm_connector_cleanup() directly.

Okay, will do.

> > +     .reset = drm_atomic_helper_connector_reset,
> > +     .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
> > +     .atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
> > +};

<snip>

> > +static void zx_crtc_atomic_begin(struct drm_crtc *crtc,
> > +                              struct drm_crtc_state *state)
> > +{
> > +     struct drm_pending_vblank_event *event = crtc->state->event;
> > +
> > +     if (!event)
> > +             return;
> > +
> > +     crtc->state->event = NULL;
> > +
> > +     spin_lock_irq(&crtc->dev->event_lock);
> > +     if (drm_crtc_vblank_get(crtc) == 0)
> > +             drm_crtc_arm_vblank_event(crtc, event);
> > +     else
> > +             drm_crtc_send_vblank_event(crtc, event);
> > +     spin_unlock_irq(&crtc->dev->event_lock);
> 
> I think you may want to send the vblank event to userspace after you
> commit your planes, and not before.

I guess you are suggesting that the code should be implemented in
.atomic_flush hook instead, right?

> > +}
> > +
> > +static const struct drm_crtc_helper_funcs zx_crtc_helper_funcs = {
> > +     .enable = zx_crtc_enable,
> > +     .disable = zx_crtc_disable,
> > +     .atomic_begin = zx_crtc_atomic_begin,
> > +};
> > +
> > +static const struct drm_crtc_funcs zx_crtc_funcs = {
> > +     .destroy = drm_crtc_cleanup,
> > +     .set_config = drm_atomic_helper_set_config,
> > +     .page_flip = drm_atomic_helper_page_flip,
> > +     .reset = drm_atomic_helper_crtc_reset,
> > +     .atomic_duplicate_state = drm_atomic_helper_crtc_duplicate_state,
> > +     .atomic_destroy_state = drm_atomic_helper_crtc_destroy_state,
> > +};
> > +
> > +static int zx_crtc_init(struct drm_device *drm, struct zx_vou_hw *vou,
> > +                     enum vou_chn_type chn_type)
> > +{
> > +     struct device *dev = vou->dev;
> > +     struct zx_layer_data data;
> > +     struct zx_crtc *zcrtc;
> > +     int ret;
> > +
> > +     zcrtc = devm_kzalloc(dev, sizeof(*zcrtc), GFP_KERNEL);
> > +     if (!zcrtc)
> > +             return -ENOMEM;
> > +
> > +     zcrtc->vou = vou;
> > +     zcrtc->chn_type = chn_type;
> > +
> > +     if (chn_type == VOU_CHN_MAIN) {
> > +             data.layer = vou->osd + MAIN_GL_OFFSET;
> > +             data.csc = vou->osd + MAIN_CSC_OFFSET;
> > +             data.hbsc = vou->osd + MAIN_HBSC_OFFSET;
> > +             data.rsz = vou->otfppu + MAIN_RSZ_OFFSET;
> > +             zcrtc->chnreg = vou->osd + OSD_MAIN_CHN;
> > +             zcrtc->regs = &main_crtc_regs;
> > +             zcrtc->bits = &main_crtc_bits;
> > +     } else {
> > +             data.layer = vou->osd + AUX_GL_OFFSET;
> > +             data.csc = vou->osd + AUX_CSC_OFFSET;
> > +             data.hbsc = vou->osd + AUX_HBSC_OFFSET;
> > +             data.rsz = vou->otfppu + AUX_RSZ_OFFSET;
> > +             zcrtc->chnreg = vou->osd + OSD_AUX_CHN;
> > +             zcrtc->regs = &aux_crtc_regs;
> > +             zcrtc->bits = &aux_crtc_bits;
> > +     }
> > +
> > +     zcrtc->pixclk = devm_clk_get(dev, (chn_type == VOU_CHN_MAIN) ?
> > +                                       "main_wclk" : "aux_wclk");
> > +     if (IS_ERR(zcrtc->pixclk)) {
> > +             ret = PTR_ERR(zcrtc->pixclk);
> > +             dev_err(dev, "failed to get pix clk: %d\n", ret);
> 
> DRM_ERROR() - here and in other places in your patch

I will follow Sean's suggestion to use DRM_DEV_* for these messages.

Shawn
diff mbox

Patch

diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig
index 483059a22b1b..a91f8cecbe0f 100644
--- a/drivers/gpu/drm/Kconfig
+++ b/drivers/gpu/drm/Kconfig
@@ -223,6 +223,8 @@  source "drivers/gpu/drm/hisilicon/Kconfig"
 
 source "drivers/gpu/drm/mediatek/Kconfig"
 
+source "drivers/gpu/drm/zte/Kconfig"
+
 # Keep legacy drivers last
 
 menuconfig DRM_LEGACY
diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile
index 25c720454017..f3251750c92b 100644
--- a/drivers/gpu/drm/Makefile
+++ b/drivers/gpu/drm/Makefile
@@ -86,3 +86,4 @@  obj-$(CONFIG_DRM_FSL_DCU) += fsl-dcu/
 obj-$(CONFIG_DRM_ETNAVIV) += etnaviv/
 obj-$(CONFIG_DRM_ARCPGU)+= arc/
 obj-y			+= hisilicon/
+obj-$(CONFIG_DRM_ZTE)	+= zte/
diff --git a/drivers/gpu/drm/zte/Kconfig b/drivers/gpu/drm/zte/Kconfig
new file mode 100644
index 000000000000..4065b2840f1c
--- /dev/null
+++ b/drivers/gpu/drm/zte/Kconfig
@@ -0,0 +1,8 @@ 
+config DRM_ZTE
+	tristate "DRM Support for ZTE SoCs"
+	depends on DRM && ARCH_ZX
+	select DRM_KMS_CMA_HELPER
+	select DRM_KMS_FB_HELPER
+	select DRM_KMS_HELPER
+	help
+	  Choose this option to enable DRM on ZTE ZX SoCs.
diff --git a/drivers/gpu/drm/zte/Makefile b/drivers/gpu/drm/zte/Makefile
new file mode 100644
index 000000000000..699180bfd57c
--- /dev/null
+++ b/drivers/gpu/drm/zte/Makefile
@@ -0,0 +1,7 @@ 
+zxdrm-y := \
+	zx_drm_drv.o \
+	zx_hdmi.o \
+	zx_plane.o \
+	zx_vou.o
+
+obj-$(CONFIG_DRM_ZTE) += zxdrm.o
diff --git a/drivers/gpu/drm/zte/zx_drm_drv.c b/drivers/gpu/drm/zte/zx_drm_drv.c
new file mode 100644
index 000000000000..2476a9b92cea
--- /dev/null
+++ b/drivers/gpu/drm/zte/zx_drm_drv.c
@@ -0,0 +1,267 @@ 
+/*
+ * Copyright 2016 Linaro Ltd.
+ * Copyright 2016 ZTE Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/component.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/of_graph.h>
+#include <linux/of_platform.h>
+#include <linux/spinlock.h>
+
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_crtc.h>
+#include <drm/drm_crtc_helper.h>
+#include <drm/drm_fb_cma_helper.h>
+#include <drm/drm_fb_helper.h>
+#include <drm/drm_gem_cma_helper.h>
+#include <drm/drm_of.h>
+#include <drm/drmP.h>
+
+#include "zx_drm_drv.h"
+#include "zx_vou.h"
+
+struct zx_drm_private {
+	struct drm_fbdev_cma *fbdev;
+};
+
+static void zx_drm_fb_output_poll_changed(struct drm_device *drm)
+{
+	struct zx_drm_private *priv = drm->dev_private;
+
+	drm_fbdev_cma_hotplug_event(priv->fbdev);
+}
+
+static const struct drm_mode_config_funcs zx_drm_mode_config_funcs = {
+	.fb_create = drm_fb_cma_create,
+	.output_poll_changed = zx_drm_fb_output_poll_changed,
+	.atomic_check = drm_atomic_helper_check,
+	.atomic_commit = drm_atomic_helper_commit,
+};
+
+static void zx_drm_lastclose(struct drm_device *drm)
+{
+	struct zx_drm_private *priv = drm->dev_private;
+
+	drm_fbdev_cma_restore_mode(priv->fbdev);
+}
+
+static const struct file_operations zx_drm_fops = {
+	.owner = THIS_MODULE,
+	.open = drm_open,
+	.release = drm_release,
+	.unlocked_ioctl = drm_ioctl,
+#ifdef CONFIG_COMPAT
+	.compat_ioctl = drm_compat_ioctl,
+#endif
+	.poll = drm_poll,
+	.read = drm_read,
+	.llseek = noop_llseek,
+	.mmap = drm_gem_cma_mmap,
+};
+
+static struct drm_driver zx_drm_driver = {
+	.driver_features = DRIVER_GEM | DRIVER_MODESET | DRIVER_PRIME |
+			   DRIVER_ATOMIC,
+	.lastclose = zx_drm_lastclose,
+	.get_vblank_counter = drm_vblank_no_hw_counter,
+	.enable_vblank = zx_vou_enable_vblank,
+	.disable_vblank = zx_vou_disable_vblank,
+	.gem_free_object = drm_gem_cma_free_object,
+	.gem_vm_ops = &drm_gem_cma_vm_ops,
+	.dumb_create = drm_gem_cma_dumb_create,
+	.dumb_map_offset = drm_gem_cma_dumb_map_offset,
+	.dumb_destroy = drm_gem_dumb_destroy,
+	.prime_handle_to_fd = drm_gem_prime_handle_to_fd,
+	.prime_fd_to_handle = drm_gem_prime_fd_to_handle,
+	.gem_prime_export = drm_gem_prime_export,
+	.gem_prime_import = drm_gem_prime_import,
+	.gem_prime_get_sg_table = drm_gem_cma_prime_get_sg_table,
+	.gem_prime_import_sg_table = drm_gem_cma_prime_import_sg_table,
+	.gem_prime_vmap = drm_gem_cma_prime_vmap,
+	.gem_prime_vunmap = drm_gem_cma_prime_vunmap,
+	.gem_prime_mmap = drm_gem_cma_prime_mmap,
+	.fops = &zx_drm_fops,
+	.name = "zx-vou",
+	.desc = "ZTE VOU Controller DRM",
+	.date = "20160811",
+	.major = 1,
+	.minor = 0,
+};
+
+static int zx_drm_bind(struct device *dev)
+{
+	struct drm_device *drm;
+	struct zx_drm_private *priv;
+	int ret;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	drm = drm_dev_alloc(&zx_drm_driver, dev);
+	if (!drm)
+		return -ENOMEM;
+
+	drm->dev_private = priv;
+	dev_set_drvdata(dev, drm);
+
+	drm_mode_config_init(drm);
+	drm->mode_config.min_width = 16;
+	drm->mode_config.min_height = 16;
+	drm->mode_config.max_width = 4096;
+	drm->mode_config.max_height = 4096;
+	drm->mode_config.funcs = &zx_drm_mode_config_funcs;
+
+	ret = component_bind_all(dev, drm);
+	if (ret) {
+		dev_err(dev, "failed to bind all components: %d\n", ret);
+		goto out_unregister;
+	}
+
+	ret = drm_vblank_init(drm, drm->mode_config.num_crtc);
+	if (ret < 0) {
+		dev_err(dev, "failed to init vblank: %d\n", ret);
+		goto out_unbind;
+	}
+
+	/*
+	 * We will manage irq handler on our own.  In this case, irq_enabled
+	 * need to be true for using vblank core support.
+	 */
+	drm->irq_enabled = true;
+
+	drm_mode_config_reset(drm);
+	drm_kms_helper_poll_init(drm);
+
+	priv->fbdev = drm_fbdev_cma_init(drm, 32, drm->mode_config.num_crtc,
+					 drm->mode_config.num_connector);
+	if (IS_ERR(priv->fbdev)) {
+		ret = PTR_ERR(priv->fbdev);
+		dev_err(dev, "failed to init cma fbdev: %d\n", ret);
+		priv->fbdev = NULL;
+		goto out_poll_fini;
+	}
+
+	ret = drm_dev_register(drm, 0);
+	if (ret)
+		goto out_fbdev_fini;
+
+	return 0;
+
+out_fbdev_fini:
+	if (priv->fbdev) {
+		drm_fbdev_cma_fini(priv->fbdev);
+		priv->fbdev = NULL;
+	}
+out_poll_fini:
+	drm_kms_helper_poll_fini(drm);
+	drm_mode_config_cleanup(drm);
+	drm_vblank_cleanup(drm);
+out_unbind:
+	component_unbind_all(dev, drm);
+out_unregister:
+	dev_set_drvdata(dev, NULL);
+	drm->dev_private = NULL;
+	drm_dev_unref(drm);
+	return ret;
+}
+
+static void zx_drm_unbind(struct device *dev)
+{
+	struct drm_device *drm = dev_get_drvdata(dev);
+	struct zx_drm_private *priv = drm->dev_private;
+
+	drm_dev_unregister(drm);
+	if (priv->fbdev) {
+		drm_fbdev_cma_fini(priv->fbdev);
+		priv->fbdev = NULL;
+	}
+	drm_kms_helper_poll_fini(drm);
+	drm_mode_config_cleanup(drm);
+	drm_vblank_cleanup(drm);
+	component_unbind_all(dev, drm);
+	dev_set_drvdata(dev, NULL);
+	drm->dev_private = NULL;
+	drm_dev_unref(drm);
+}
+
+static const struct component_master_ops zx_drm_master_ops = {
+	.bind = zx_drm_bind,
+	.unbind = zx_drm_unbind,
+};
+
+static int compare_of(struct device *dev, void *data)
+{
+	return dev->of_node == data;
+}
+
+static int zx_drm_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *parent = dev->of_node;
+	struct device_node *child;
+	struct component_match *match = NULL;
+	int ret;
+
+	ret = of_platform_populate(parent, NULL, NULL, dev);
+	if (ret)
+		return ret;
+
+	for_each_available_child_of_node(parent, child) {
+		component_match_add(dev, &match, compare_of, child);
+		of_node_put(child);
+	}
+
+	return component_master_add_with_match(dev, &zx_drm_master_ops, match);
+}
+
+static int zx_drm_remove(struct platform_device *pdev)
+{
+	component_master_del(&pdev->dev, &zx_drm_master_ops);
+	return 0;
+}
+
+static const struct of_device_id zx_drm_of_match[] = {
+	{ .compatible = "zte,zx296718-vou", },
+	{ /* end */ },
+};
+MODULE_DEVICE_TABLE(of, zx_drm_of_match);
+
+static struct platform_driver zx_drm_platform_driver = {
+	.probe = zx_drm_probe,
+	.remove = zx_drm_remove,
+	.driver	= {
+		.name = "zx-drm",
+		.of_match_table	= zx_drm_of_match,
+	},
+};
+
+static struct platform_driver *drivers[] = {
+	&zx_crtc_driver,
+	&zx_hdmi_driver,
+	&zx_drm_platform_driver,
+};
+
+static int zx_drm_init(void)
+{
+	return platform_register_drivers(drivers, ARRAY_SIZE(drivers));
+}
+module_init(zx_drm_init);
+
+static void zx_drm_exit(void)
+{
+	platform_unregister_drivers(drivers, ARRAY_SIZE(drivers));
+}
+module_exit(zx_drm_exit);
+
+MODULE_AUTHOR("Shawn Guo <shawn.guo@linaro.org>");
+MODULE_DESCRIPTION("ZTE ZX VOU DRM driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/gpu/drm/zte/zx_drm_drv.h b/drivers/gpu/drm/zte/zx_drm_drv.h
new file mode 100644
index 000000000000..e65cd18a6cba
--- /dev/null
+++ b/drivers/gpu/drm/zte/zx_drm_drv.h
@@ -0,0 +1,36 @@ 
+/*
+ * Copyright 2016 Linaro Ltd.
+ * Copyright 2016 ZTE Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __ZX_DRM_DRV_H__
+#define __ZX_DRM_DRV_H__
+
+extern struct platform_driver zx_crtc_driver;
+extern struct platform_driver zx_hdmi_driver;
+
+static inline u32 zx_readl(void __iomem *reg)
+{
+	return readl_relaxed(reg);
+}
+
+static inline void zx_writel(void __iomem *reg, u32 val)
+{
+	writel_relaxed(val, reg);
+}
+
+static inline void zx_writel_mask(void __iomem *reg, u32 mask, u32 val)
+{
+	u32 tmp;
+
+	tmp = zx_readl(reg);
+	tmp = (tmp & ~mask) | (val & mask);
+	zx_writel(reg, tmp);
+}
+
+#endif /* __ZX_DRM_DRV_H__ */
diff --git a/drivers/gpu/drm/zte/zx_hdmi.c b/drivers/gpu/drm/zte/zx_hdmi.c
new file mode 100644
index 000000000000..81e1c3716ed8
--- /dev/null
+++ b/drivers/gpu/drm/zte/zx_hdmi.c
@@ -0,0 +1,678 @@ 
+/*
+ * Copyright 2016 Linaro Ltd.
+ * Copyright 2016 ZTE Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/component.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/hdmi.h>
+#include <linux/irq.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of_device.h>
+
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_crtc_helper.h>
+#include <drm/drm_edid.h>
+#include <drm/drm_of.h>
+#include <drm/drmP.h>
+
+#include "zx_vou.h"
+
+#define FUNC_SEL			0x000b
+#define FUNC_HDMI_EN			BIT(0)
+#define CLKPWD				0x000d
+#define CLKPWD_PDIDCK			BIT(2)
+#define PWD_SRST			0x0010
+#define P2T_CTRL			0x0066
+#define P2T_DC_PKT_EN			BIT(7)
+#define L1_INTR_STAT			0x007e
+#define L1_INTR_STAT_INTR1		BIT(0)
+#define INTR1_STAT			0x008f
+#define INTR1_MASK			0x0095
+#define INTR1_MONITOR_DETECT		(BIT(5) | BIT(6))
+#define ZX_DDC_ADDR			0x00ed
+#define ZX_DDC_SEGM			0x00ee
+#define ZX_DDC_OFFSET			0x00ef
+#define ZX_DDC_DIN_CNT1			0x00f0
+#define ZX_DDC_DIN_CNT2			0x00f1
+#define ZX_DDC_CMD			0x00f3
+#define DDC_CMD_MASK			0xf
+#define DDC_CMD_CLEAR_FIFO		0x9
+#define DDC_CMD_SEQUENTIAL_READ		0x2
+#define ZX_DDC_DATA			0x00f4
+#define ZX_DDC_DOUT_CNT			0x00f5
+#define DDC_DOUT_CNT_MASK		0x1f
+#define TEST_TXCTRL			0x00f7
+#define TEST_TXCTRL_HDMI_MODE		BIT(1)
+#define HDMICTL4			0x0235
+#define TPI_HPD_RSEN			0x063b
+#define TPI_HPD_CONNECTION		(BIT(1) | BIT(2))
+#define TPI_INFO_FSEL			0x06bf
+#define FSEL_AVI			0
+#define FSEL_GBD			1
+#define FSEL_AUDIO			2
+#define FSEL_SPD			3
+#define FSEL_MPEG			4
+#define FSEL_VSIF			5
+#define TPI_INFO_B0			0x06c0
+#define TPI_INFO_EN			0x06df
+#define TPI_INFO_TRANS_EN		BIT(7)
+#define TPI_INFO_TRANS_RPT		BIT(6)
+#define TPI_DDC_MASTER_EN		0x06f8
+#define HW_DDC_MASTER			BIT(7)
+
+#define ZX_HDMI_INFOFRAME_SIZE		31
+
+#define DDC_SEGMENT_ADDR		0x30
+
+struct zx_hdmi_i2c {
+	struct i2c_adapter adap;
+	struct mutex lock;
+};
+
+struct zx_hdmi {
+	struct drm_connector connector;
+	struct drm_encoder encoder;
+	struct zx_hdmi_i2c *ddc;
+	struct device *dev;
+	struct drm_device *drm;
+	void __iomem *mmio;
+	struct clk *cec_clk;
+	struct clk *osc_clk;
+	struct clk *xclk;
+	bool sink_is_hdmi;
+	bool sink_has_audio;
+	const struct vou_inf *inf;
+};
+
+#define to_zx_hdmi(x) container_of(x, struct zx_hdmi, x)
+
+static const struct vou_inf vou_inf_hdmi = {
+	.id = VOU_HDMI,
+	.data_sel = VOU_YUV444,
+	.clocks_en_bits = BIT(24) | BIT(18) | BIT(6),
+	.clocks_sel_bits = BIT(13) | BIT(2),
+};
+
+static inline u8 hdmi_readb(struct zx_hdmi *hdmi, u16 offset)
+{
+	return readl_relaxed(hdmi->mmio + offset * 4);
+}
+
+static inline void hdmi_writeb(struct zx_hdmi *hdmi, u16 offset, u8 val)
+{
+	writel_relaxed(val, hdmi->mmio + offset * 4);
+}
+
+static inline void hdmi_writeb_mask(struct zx_hdmi *hdmi, u16 offset,
+				    u8 mask, u8 val)
+{
+	u8 tmp;
+
+	tmp = hdmi_readb(hdmi, offset);
+	tmp = (tmp & ~mask) | (val & mask);
+	hdmi_writeb(hdmi, offset, tmp);
+}
+
+static int zx_hdmi_infoframe_trans(struct zx_hdmi *hdmi,
+				   union hdmi_infoframe *frame, u8 fsel)
+{
+	u8 buffer[ZX_HDMI_INFOFRAME_SIZE];
+	int num;
+	int i;
+
+	hdmi_writeb(hdmi, TPI_INFO_FSEL, fsel);
+
+	num = hdmi_infoframe_pack(frame, buffer, ZX_HDMI_INFOFRAME_SIZE);
+	if (num < 0) {
+		dev_err(hdmi->dev, "failed to pack infoframe: %d\n", num);
+		return num;
+	}
+
+	for (i = 0; i < num; i++)
+		hdmi_writeb(hdmi, TPI_INFO_B0 + i, buffer[i]);
+
+	hdmi_writeb_mask(hdmi, TPI_INFO_EN, TPI_INFO_TRANS_RPT,
+			 TPI_INFO_TRANS_RPT);
+	hdmi_writeb_mask(hdmi, TPI_INFO_EN, TPI_INFO_TRANS_EN,
+			 TPI_INFO_TRANS_EN);
+
+	return num;
+}
+
+static int zx_hdmi_config_video_vsi(struct zx_hdmi *hdmi,
+				    struct drm_display_mode *mode)
+{
+	union hdmi_infoframe frame;
+	int ret;
+
+	ret = drm_hdmi_vendor_infoframe_from_display_mode(&frame.vendor.hdmi,
+							  mode);
+	if (ret) {
+		dev_err(hdmi->dev, "failed to get vendor infoframe: %d\n", ret);
+		return ret;
+	}
+
+	return zx_hdmi_infoframe_trans(hdmi, &frame, FSEL_VSIF);
+}
+
+static int zx_hdmi_config_video_avi(struct zx_hdmi *hdmi,
+				    struct drm_display_mode *mode)
+{
+	union hdmi_infoframe frame;
+	int ret;
+
+	ret = drm_hdmi_avi_infoframe_from_display_mode(&frame.avi, mode);
+	if (ret) {
+		dev_err(hdmi->dev, "failed to get avi infoframe: %d\n", ret);
+		return ret;
+	}
+
+	/* We always use YUV444 for HDMI output. */
+	frame.avi.colorspace = HDMI_COLORSPACE_YUV444;
+
+	return zx_hdmi_infoframe_trans(hdmi, &frame, FSEL_AVI);
+}
+
+static void zx_hdmi_encoder_mode_set(struct drm_encoder *encoder,
+				     struct drm_display_mode *mode,
+				     struct drm_display_mode *adj_mode)
+{
+	struct zx_hdmi *hdmi = to_zx_hdmi(encoder);
+
+	if (hdmi->sink_is_hdmi) {
+		zx_hdmi_config_video_avi(hdmi, mode);
+		zx_hdmi_config_video_vsi(hdmi, mode);
+	}
+}
+
+static void zx_hdmi_encoder_enable(struct drm_encoder *encoder)
+{
+	struct zx_hdmi *hdmi = to_zx_hdmi(encoder);
+
+	vou_inf_enable(hdmi->inf, encoder->crtc);
+}
+
+static void zx_hdmi_encoder_disable(struct drm_encoder *encoder)
+{
+	struct zx_hdmi *hdmi = to_zx_hdmi(encoder);
+
+	vou_inf_disable(hdmi->inf, encoder->crtc);
+}
+
+static const struct drm_encoder_helper_funcs zx_hdmi_encoder_helper_funcs = {
+	.enable	= zx_hdmi_encoder_enable,
+	.disable = zx_hdmi_encoder_disable,
+	.mode_set = zx_hdmi_encoder_mode_set,
+};
+
+static const struct drm_encoder_funcs zx_hdmi_encoder_funcs = {
+	.destroy = drm_encoder_cleanup,
+};
+
+static int zx_hdmi_connector_get_modes(struct drm_connector *connector)
+{
+	struct zx_hdmi *hdmi = to_zx_hdmi(connector);
+	struct edid *edid;
+	int ret;
+
+	edid = drm_get_edid(connector, &hdmi->ddc->adap);
+	if (!edid)
+		return 0;
+
+	hdmi->sink_is_hdmi = drm_detect_hdmi_monitor(edid);
+	hdmi->sink_has_audio = drm_detect_monitor_audio(edid);
+	drm_mode_connector_update_edid_property(connector, edid);
+	ret = drm_add_edid_modes(connector, edid);
+	kfree(edid);
+
+	return ret;
+}
+
+static enum drm_mode_status
+zx_hdmi_connector_mode_valid(struct drm_connector *connector,
+			     struct drm_display_mode *mode)
+{
+	return MODE_OK;
+}
+
+static struct drm_connector_helper_funcs zx_hdmi_connector_helper_funcs = {
+	.get_modes = zx_hdmi_connector_get_modes,
+	.mode_valid = zx_hdmi_connector_mode_valid,
+};
+
+static enum drm_connector_status
+zx_hdmi_connector_detect(struct drm_connector *connector, bool force)
+{
+	struct zx_hdmi *hdmi = to_zx_hdmi(connector);
+
+	return (hdmi_readb(hdmi, TPI_HPD_RSEN) & TPI_HPD_CONNECTION) ?
+		connector_status_connected : connector_status_disconnected;
+}
+
+static void zx_hdmi_connector_destroy(struct drm_connector *connector)
+{
+	drm_connector_unregister(connector);
+	drm_connector_cleanup(connector);
+}
+
+static const struct drm_connector_funcs zx_hdmi_connector_funcs = {
+	.dpms = drm_atomic_helper_connector_dpms,
+	.fill_modes = drm_helper_probe_single_connector_modes,
+	.detect = zx_hdmi_connector_detect,
+	.destroy = zx_hdmi_connector_destroy,
+	.reset = drm_atomic_helper_connector_reset,
+	.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
+	.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
+};
+
+static int zx_hdmi_register(struct drm_device *drm, struct zx_hdmi *hdmi)
+{
+	struct drm_encoder *encoder = &hdmi->encoder;
+
+	encoder->possible_crtcs = VOU_CRTC_MASK;
+
+	drm_encoder_init(drm, encoder, &zx_hdmi_encoder_funcs,
+			 DRM_MODE_ENCODER_TMDS, NULL);
+	drm_encoder_helper_add(encoder, &zx_hdmi_encoder_helper_funcs);
+
+	hdmi->connector.polled = DRM_CONNECTOR_POLL_HPD;
+
+	drm_connector_init(drm, &hdmi->connector, &zx_hdmi_connector_funcs,
+			   DRM_MODE_CONNECTOR_HDMIA);
+	drm_connector_helper_add(&hdmi->connector,
+				 &zx_hdmi_connector_helper_funcs);
+
+	drm_mode_connector_attach_encoder(&hdmi->connector, encoder);
+
+	return 0;
+}
+
+static irqreturn_t zx_hdmi_irq_thread(int irq, void *dev_id)
+{
+	struct zx_hdmi *hdmi = dev_id;
+
+	drm_helper_hpd_irq_event(hdmi->connector.dev);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t zx_hdmi_irq_handler(int irq, void *dev_id)
+{
+	struct zx_hdmi *hdmi = dev_id;
+	u8 lstat;
+
+	lstat = hdmi_readb(hdmi, L1_INTR_STAT);
+
+	/* Monitor detect/HPD interrupt */
+	if (lstat & L1_INTR_STAT_INTR1) {
+		u8 stat;
+
+		stat = hdmi_readb(hdmi, INTR1_STAT);
+		hdmi_writeb(hdmi, INTR1_STAT, stat);
+
+		if (stat & INTR1_MONITOR_DETECT)
+			return IRQ_WAKE_THREAD;
+	}
+
+	return IRQ_NONE;
+}
+
+static int zx_hdmi_i2c_read(struct zx_hdmi *hdmi, struct i2c_msg *msg)
+{
+	int len = msg->len;
+	u8 *buf = msg->buf;
+	int retry = 0;
+	int ret = 0;
+
+	/* Bits [9:8] of bytes */
+	hdmi_writeb(hdmi, ZX_DDC_DIN_CNT2, (len >> 8) & 0xff);
+	/* Bits [7:0] of bytes */
+	hdmi_writeb(hdmi, ZX_DDC_DIN_CNT1, len & 0xff);
+
+	/* Clear FIFO */
+	hdmi_writeb_mask(hdmi, ZX_DDC_CMD, DDC_CMD_MASK, DDC_CMD_CLEAR_FIFO);
+
+	/* Kick off the read */
+	hdmi_writeb_mask(hdmi, ZX_DDC_CMD, DDC_CMD_MASK,
+			 DDC_CMD_SEQUENTIAL_READ);
+
+	while (len > 0) {
+		int cnt, i;
+
+		/* FIFO needs some time to get ready */
+		usleep_range(500, 1000);
+
+		cnt = hdmi_readb(hdmi, ZX_DDC_DOUT_CNT) & DDC_DOUT_CNT_MASK;
+		if (cnt == 0) {
+			if (++retry > 5) {
+				dev_err(hdmi->dev, "DDC FIFO read timed out!");
+				ret = -ETIMEDOUT;
+				break;
+			}
+			continue;
+		}
+
+		for (i = 0; i < cnt; i++)
+			*buf++ = hdmi_readb(hdmi, ZX_DDC_DATA);
+		len -= cnt;
+	}
+
+	return ret;
+}
+
+static int zx_hdmi_i2c_write(struct zx_hdmi *hdmi, struct i2c_msg *msg)
+{
+	/*
+	 * The DDC I2C adapter is only for reading EDID data, so we assume
+	 * that the write to this adapter must be the EDID data offset.
+	 */
+	if ((msg->len != 1) ||
+	    ((msg->addr != DDC_ADDR) && (msg->addr != DDC_SEGMENT_ADDR)))
+		return -EINVAL;
+
+	if (msg->addr == DDC_SEGMENT_ADDR)
+		hdmi_writeb(hdmi, ZX_DDC_SEGM, msg->addr << 1);
+	else if (msg->addr == DDC_ADDR)
+		hdmi_writeb(hdmi, ZX_DDC_ADDR, msg->addr << 1);
+
+	hdmi_writeb(hdmi, ZX_DDC_OFFSET, msg->buf[0]);
+
+	return 0;
+}
+
+static int zx_hdmi_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
+			    int num)
+{
+	struct zx_hdmi *hdmi = i2c_get_adapdata(adap);
+	struct zx_hdmi_i2c *ddc = hdmi->ddc;
+	int i, ret = 0;
+
+	mutex_lock(&ddc->lock);
+
+	/* Enable DDC master access */
+	hdmi_writeb_mask(hdmi, TPI_DDC_MASTER_EN, HW_DDC_MASTER, HW_DDC_MASTER);
+
+	for (i = 0; i < num; i++) {
+		dev_dbg(hdmi->dev, "xfer: num: %d/%d, len: %d, flags: %#x\n",
+			i + 1, num, msgs[i].len, msgs[i].flags);
+
+		if (msgs[i].flags & I2C_M_RD)
+			ret = zx_hdmi_i2c_read(hdmi, &msgs[i]);
+		else
+			ret = zx_hdmi_i2c_write(hdmi, &msgs[i]);
+
+		if (ret < 0)
+			break;
+	}
+
+	if (!ret)
+		ret = num;
+
+	/* Disable DDC master access */
+	hdmi_writeb_mask(hdmi, TPI_DDC_MASTER_EN, HW_DDC_MASTER, 0);
+
+	mutex_unlock(&ddc->lock);
+
+	return ret;
+}
+
+static u32 zx_hdmi_i2c_func(struct i2c_adapter *adapter)
+{
+	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
+}
+
+static const struct i2c_algorithm zx_hdmi_algorithm = {
+	.master_xfer	= zx_hdmi_i2c_xfer,
+	.functionality	= zx_hdmi_i2c_func,
+};
+
+static int zx_hdmi_ddc_register(struct zx_hdmi *hdmi)
+{
+	struct i2c_adapter *adap;
+	struct zx_hdmi_i2c *ddc;
+	int ret;
+
+	ddc = devm_kzalloc(hdmi->dev, sizeof(*ddc), GFP_KERNEL);
+	if (!ddc)
+		return -ENOMEM;
+
+	hdmi->ddc = ddc;
+	mutex_init(&ddc->lock);
+
+	adap = &ddc->adap;
+	adap->owner = THIS_MODULE;
+	adap->class = I2C_CLASS_DDC;
+	adap->dev.parent = hdmi->dev;
+	adap->algo = &zx_hdmi_algorithm;
+	snprintf(adap->name, sizeof(adap->name), "zx hdmi i2c");
+
+	ret = i2c_add_adapter(adap);
+	if (ret) {
+		dev_err(hdmi->dev, "failed to add I2C adapter: %d\n", ret);
+		return ret;
+	}
+
+	i2c_set_adapdata(adap, hdmi);
+
+	return 0;
+}
+
+static void zx_hdmi_phy_start(struct zx_hdmi *hdmi)
+{
+	/* Copy from ZTE BSP code */
+	hdmi_writeb(hdmi, 0x222, 0x0);
+	hdmi_writeb(hdmi, 0x224, 0x4);
+	hdmi_writeb(hdmi, 0x909, 0x0);
+	hdmi_writeb(hdmi, 0x7b0, 0x90);
+	hdmi_writeb(hdmi, 0x7b1, 0x00);
+	hdmi_writeb(hdmi, 0x7b2, 0xa7);
+	hdmi_writeb(hdmi, 0x7b8, 0xaa);
+	hdmi_writeb(hdmi, 0x7b2, 0xa7);
+	hdmi_writeb(hdmi, 0x7b3, 0x0f);
+	hdmi_writeb(hdmi, 0x7b4, 0x0f);
+	hdmi_writeb(hdmi, 0x7b5, 0x55);
+	hdmi_writeb(hdmi, 0x7b7, 0x03);
+	hdmi_writeb(hdmi, 0x7b9, 0x12);
+	hdmi_writeb(hdmi, 0x7ba, 0x32);
+	hdmi_writeb(hdmi, 0x7bc, 0x68);
+	hdmi_writeb(hdmi, 0x7be, 0x40);
+	hdmi_writeb(hdmi, 0x7bf, 0x84);
+	hdmi_writeb(hdmi, 0x7c1, 0x0f);
+	hdmi_writeb(hdmi, 0x7c8, 0x02);
+	hdmi_writeb(hdmi, 0x7c9, 0x03);
+	hdmi_writeb(hdmi, 0x7ca, 0x40);
+	hdmi_writeb(hdmi, 0x7dc, 0x31);
+	hdmi_writeb(hdmi, 0x7e2, 0x04);
+	hdmi_writeb(hdmi, 0x7e0, 0x06);
+	hdmi_writeb(hdmi, 0x7cb, 0x68);
+	hdmi_writeb(hdmi, 0x7f9, 0x02);
+	hdmi_writeb(hdmi, 0x7b6, 0x02);
+	hdmi_writeb(hdmi, 0x7f3, 0x0);
+}
+
+static void zx_hdmi_hw_init(struct zx_hdmi *hdmi)
+{
+	/* Software reset */
+	hdmi_writeb(hdmi, PWD_SRST, 1);
+
+	/* Enable pclk */
+	hdmi_writeb_mask(hdmi, CLKPWD, CLKPWD_PDIDCK, CLKPWD_PDIDCK);
+
+	/* Enable HDMI for TX */
+	hdmi_writeb_mask(hdmi, FUNC_SEL, FUNC_HDMI_EN, FUNC_HDMI_EN);
+
+	/* Enable deep color packet */
+	hdmi_writeb_mask(hdmi, P2T_CTRL, P2T_DC_PKT_EN, P2T_DC_PKT_EN);
+
+	/* Enable HDMI/MHL mode for output */
+	hdmi_writeb_mask(hdmi, TEST_TXCTRL, TEST_TXCTRL_HDMI_MODE,
+			 TEST_TXCTRL_HDMI_MODE);
+
+	/* Configure reg_qc_sel */
+	hdmi_writeb(hdmi, HDMICTL4, 0x3);
+
+	/* Enable interrupt */
+	hdmi_writeb_mask(hdmi, INTR1_MASK, INTR1_MONITOR_DETECT,
+			 INTR1_MONITOR_DETECT);
+
+	/* Clear reset for normal operation */
+	hdmi_writeb(hdmi, PWD_SRST, 0);
+
+	/* Start up phy */
+	zx_hdmi_phy_start(hdmi);
+}
+
+static int zx_hdmi_bind(struct device *dev, struct device *master, void *data)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct drm_device *drm = data;
+	struct resource *res;
+	struct zx_hdmi *hdmi;
+	int irq;
+	int ret;
+
+	hdmi = devm_kzalloc(dev, sizeof(*hdmi), GFP_KERNEL);
+	if (!hdmi)
+		return -ENOMEM;
+
+	hdmi->dev = dev;
+	hdmi->drm = drm;
+	hdmi->inf = &vou_inf_hdmi;
+
+	dev_set_drvdata(dev, hdmi);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	hdmi->mmio = devm_ioremap_resource(dev, res);
+	if (IS_ERR(hdmi->mmio)) {
+		ret = PTR_ERR(hdmi->mmio);
+		dev_err(dev, "failed to remap hdmi region: %d\n", ret);
+		return ret;
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
+
+	hdmi->cec_clk = devm_clk_get(hdmi->dev, "osc_cec");
+	if (IS_ERR(hdmi->cec_clk)) {
+		ret = PTR_ERR(hdmi->cec_clk);
+		dev_err(dev, "failed to get cec_clk: %d\n", ret);
+		return ret;
+	}
+
+	hdmi->osc_clk = devm_clk_get(hdmi->dev, "osc_clk");
+	if (IS_ERR(hdmi->osc_clk)) {
+		ret = PTR_ERR(hdmi->osc_clk);
+		dev_err(dev, "failed to get osc_clk: %d\n", ret);
+		return ret;
+	}
+
+	hdmi->xclk = devm_clk_get(hdmi->dev, "xclk");
+	if (IS_ERR(hdmi->xclk)) {
+		ret = PTR_ERR(hdmi->xclk);
+		dev_err(dev, "failed to get xclk: %d\n", ret);
+		return ret;
+	}
+
+	zx_hdmi_hw_init(hdmi);
+
+	ret = clk_prepare_enable(hdmi->cec_clk);
+	if (ret) {
+		dev_err(dev, "failed to enable cec_clk: %d\n", ret);
+		return ret;
+	}
+
+	ret = clk_prepare_enable(hdmi->osc_clk);
+	if (ret) {
+		dev_err(dev, "failed to enable osc_clk: %d\n", ret);
+		goto disable_cec_clk;
+	}
+
+	ret = clk_prepare_enable(hdmi->xclk);
+	if (ret) {
+		dev_err(dev, "failed to enable xclk: %d\n", ret);
+		goto disable_osc_clk;
+	}
+
+
+	ret = zx_hdmi_ddc_register(hdmi);
+	if (ret) {
+		dev_err(dev, "failed to register ddc: %d\n", ret);
+		goto disable_xclk;
+	}
+
+	ret = zx_hdmi_register(drm, hdmi);
+	if (ret) {
+		dev_err(dev, "failed to register hdmi: %d\n", ret);
+		goto disable_xclk;
+	}
+
+	ret = devm_request_threaded_irq(dev, irq, zx_hdmi_irq_handler,
+					zx_hdmi_irq_thread, IRQF_SHARED,
+					dev_name(dev), hdmi);
+	if (ret) {
+		dev_err(dev, "failed to request threaded irq: %d\n", ret);
+		goto disable_xclk;
+	}
+
+	return 0;
+
+disable_xclk:
+	clk_disable_unprepare(hdmi->xclk);
+disable_osc_clk:
+	clk_disable_unprepare(hdmi->osc_clk);
+disable_cec_clk:
+	clk_disable_unprepare(hdmi->cec_clk);
+	return ret;
+}
+
+static void zx_hdmi_unbind(struct device *dev, struct device *master,
+			   void *data)
+{
+	struct zx_hdmi *hdmi = dev_get_drvdata(dev);
+
+	clk_disable_unprepare(hdmi->xclk);
+	clk_disable_unprepare(hdmi->osc_clk);
+	clk_disable_unprepare(hdmi->cec_clk);
+}
+
+static const struct component_ops zx_hdmi_component_ops = {
+	.bind = zx_hdmi_bind,
+	.unbind = zx_hdmi_unbind,
+};
+
+static int zx_hdmi_probe(struct platform_device *pdev)
+{
+	return component_add(&pdev->dev, &zx_hdmi_component_ops);
+}
+
+static int zx_hdmi_remove(struct platform_device *pdev)
+{
+	component_del(&pdev->dev, &zx_hdmi_component_ops);
+	return 0;
+}
+
+static const struct of_device_id zx_hdmi_of_match[] = {
+	{ .compatible = "zte,zx296718-hdmi", },
+	{ /* end */ },
+};
+MODULE_DEVICE_TABLE(of, zx_hdmi_of_match);
+
+struct platform_driver zx_hdmi_driver = {
+	.probe = zx_hdmi_probe,
+	.remove = zx_hdmi_remove,
+	.driver	= {
+		.name = "zx-hdmi",
+		.of_match_table	= zx_hdmi_of_match,
+	},
+};
diff --git a/drivers/gpu/drm/zte/zx_plane.c b/drivers/gpu/drm/zte/zx_plane.c
new file mode 100644
index 000000000000..fdab1715bee5
--- /dev/null
+++ b/drivers/gpu/drm/zte/zx_plane.c
@@ -0,0 +1,375 @@ 
+/*
+ * Copyright 2016 Linaro Ltd.
+ * Copyright 2016 ZTE Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <drm/drm_atomic.h>
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_fb_cma_helper.h>
+#include <drm/drm_gem_cma_helper.h>
+#include <drm/drm_modeset_helper_vtables.h>
+#include <drm/drm_plane_helper.h>
+#include <drm/drmP.h>
+
+#include "zx_drm_drv.h"
+#include "zx_plane.h"
+#include "zx_vou.h"
+
+/* GL registers */
+#define GL_CTRL0			0x00
+#define GL_UPDATE			BIT(5)
+#define GL_CTRL1			0x04
+#define GL_DATA_FMT_SHIFT		0
+#define GL_DATA_FMT_MASK		(0xf << GL_DATA_FMT_SHIFT)
+#define GL_FMT_ARGB8888			0
+#define GL_FMT_RGB888			1
+#define GL_FMT_RGB565			2
+#define GL_FMT_ARGB1555			3
+#define GL_FMT_ARGB4444			4
+#define GL_CTRL2			0x08
+#define GL_GLOBAL_ALPHA_SHIFT		8
+#define GL_GLOBAL_ALPHA_MASK		(0xff << GL_GLOBAL_ALPHA_SHIFT)
+#define GL_CTRL3			0x0c
+#define GL_SCALER_BYPASS_MODE		BIT(0)
+#define GL_STRIDE			0x18
+#define GL_ADDR				0x1c
+#define GL_SRC_SIZE			0x38
+#define GL_SRC_W_SHIFT			16
+#define GL_SRC_W_MASK			(0x3fff << GL_SRC_W_SHIFT)
+#define GL_SRC_H_SHIFT			0
+#define GL_SRC_H_MASK			(0x3fff << GL_SRC_H_SHIFT)
+#define GL_POS_START			0x9c
+#define GL_POS_END			0xa0
+#define GL_POS_X_SHIFT			16
+#define GL_POS_X_MASK			(0x1fff << GL_POS_X_SHIFT)
+#define GL_POS_Y_SHIFT			0
+#define GL_POS_Y_MASK			(0x1fff << GL_POS_Y_SHIFT)
+
+#define GL_SRC_W(x)	(((x) << GL_SRC_W_SHIFT) & GL_SRC_W_MASK)
+#define GL_SRC_H(x)	(((x) << GL_SRC_H_SHIFT) & GL_SRC_H_MASK)
+#define GL_POS_X(x)	(((x) << GL_POS_X_SHIFT) & GL_POS_X_MASK)
+#define GL_POS_Y(x)	(((x) << GL_POS_Y_SHIFT) & GL_POS_Y_MASK)
+
+/* CSC registers */
+#define CSC_CTRL0			0x30
+#define CSC_COV_MODE_SHIFT		16
+#define CSC_COV_MODE_MASK		(0xffff << CSC_COV_MODE_SHIFT)
+#define CSC_BT601_IMAGE_RGB2YCBCR	0
+#define CSC_BT601_IMAGE_YCBCR2RGB	1
+#define CSC_BT601_VIDEO_RGB2YCBCR	2
+#define CSC_BT601_VIDEO_YCBCR2RGB	3
+#define CSC_BT709_IMAGE_RGB2YCBCR	4
+#define CSC_BT709_IMAGE_YCBCR2RGB	5
+#define CSC_BT709_VIDEO_RGB2YCBCR	6
+#define CSC_BT709_VIDEO_YCBCR2RGB	7
+#define CSC_BT2020_IMAGE_RGB2YCBCR	8
+#define CSC_BT2020_IMAGE_YCBCR2RGB	9
+#define CSC_BT2020_VIDEO_RGB2YCBCR	10
+#define CSC_BT2020_VIDEO_YCBCR2RGB	11
+#define CSC_WORK_ENABLE			BIT(0)
+
+/* RSZ registers */
+#define RSZ_SRC_CFG			0x00
+#define RSZ_DEST_CFG			0x04
+#define RSZ_ENABLE_CFG			0x14
+
+#define RSZ_VER_SHIFT			16
+#define RSZ_VER_MASK			(0xffff << RSZ_VER_SHIFT)
+#define RSZ_HOR_SHIFT			0
+#define RSZ_HOR_MASK			(0xffff << RSZ_HOR_SHIFT)
+
+#define RSZ_VER(x)	(((x) << RSZ_VER_SHIFT) & RSZ_VER_MASK)
+#define RSZ_HOR(x)	(((x) << RSZ_HOR_SHIFT) & RSZ_HOR_MASK)
+
+/* HBSC registers */
+#define HBSC_SATURATION			0x00
+#define HBSC_HUE			0x04
+#define HBSC_BRIGHT			0x08
+#define HBSC_CONTRAST			0x0c
+#define HBSC_THRESHOLD_COL1		0x10
+#define HBSC_THRESHOLD_COL2		0x14
+#define HBSC_THRESHOLD_COL3		0x18
+#define HBSC_CTRL0			0x28
+#define HBSC_CTRL_EN			BIT(2)
+
+struct zx_plane {
+	struct drm_plane plane;
+	void __iomem *layer;
+	void __iomem *csc;
+	void __iomem *hbsc;
+	void __iomem *rsz;
+};
+
+#define to_zx_plane(plane)	container_of(plane, struct zx_plane, plane)
+
+static const uint32_t gl_formats[] = {
+	DRM_FORMAT_ARGB8888,
+	DRM_FORMAT_XRGB8888,
+	DRM_FORMAT_RGB888,
+	DRM_FORMAT_RGB565,
+	DRM_FORMAT_ARGB1555,
+	DRM_FORMAT_ARGB4444,
+};
+
+static int zx_gl_plane_atomic_check(struct drm_plane *plane,
+				    struct drm_plane_state *plane_state)
+{
+	struct drm_framebuffer *fb = plane_state->fb;
+	struct drm_crtc *crtc = plane_state->crtc;
+	struct drm_crtc_state *crtc_state;
+	struct drm_rect clip;
+
+	if (!crtc || !fb)
+		return 0;
+
+	crtc_state = drm_atomic_get_existing_crtc_state(plane_state->state,
+							crtc);
+	if (WARN_ON(!crtc_state))
+		return -EINVAL;
+
+	/* plane must match crtc enable state */
+	if (crtc_state->enable != !!plane_state->crtc)
+		return -EINVAL;
+
+	/* nothing to check when disabling or disabled */
+	if (!crtc_state->enable)
+		return 0;
+
+	clip.x1 = 0;
+	clip.y1 = 0;
+	clip.x2 = crtc_state->adjusted_mode.hdisplay;
+	clip.y2 = crtc_state->adjusted_mode.vdisplay;
+
+	return drm_plane_helper_check_state(plane_state, &clip,
+					    DRM_PLANE_HELPER_NO_SCALING,
+					    DRM_PLANE_HELPER_NO_SCALING,
+					    false, true);
+}
+
+static int zx_gl_get_fmt(uint32_t format)
+{
+	switch (format) {
+	case DRM_FORMAT_ARGB8888:
+	case DRM_FORMAT_XRGB8888:
+		return GL_FMT_ARGB8888;
+	case DRM_FORMAT_RGB888:
+		return GL_FMT_RGB888;
+	case DRM_FORMAT_RGB565:
+		return GL_FMT_RGB565;
+	case DRM_FORMAT_ARGB1555:
+		return GL_FMT_ARGB1555;
+	case DRM_FORMAT_ARGB4444:
+		return GL_FMT_ARGB4444;
+	default:
+		WARN_ONCE(1, "invalid pixel format %d\n", format);
+		return -EINVAL;
+	}
+}
+
+static inline void zx_gl_set_update(struct zx_plane *zplane)
+{
+	void __iomem *layer = zplane->layer;
+
+	zx_writel_mask(layer + GL_CTRL0, GL_UPDATE, GL_UPDATE);
+}
+
+static inline void zx_gl_rsz_set_update(struct zx_plane *zplane)
+{
+	zx_writel(zplane->rsz + RSZ_ENABLE_CFG, 1);
+}
+
+void zx_plane_set_update(struct drm_plane *plane)
+{
+	struct zx_plane *zplane = to_zx_plane(plane);
+
+	zx_gl_rsz_set_update(zplane);
+	zx_gl_set_update(zplane);
+}
+
+static void zx_gl_rsz_setup(struct zx_plane *zplane, u32 src_w, u32 src_h,
+			    u32 dst_w, u32 dst_h)
+{
+	void __iomem *rsz = zplane->rsz;
+
+	zx_writel(rsz + RSZ_SRC_CFG, RSZ_VER(src_h - 1) | RSZ_HOR(src_w - 1));
+	zx_writel(rsz + RSZ_DEST_CFG, RSZ_VER(dst_h - 1) | RSZ_HOR(dst_w - 1));
+
+	zx_gl_rsz_set_update(zplane);
+}
+
+static void zx_gl_plane_atomic_update(struct drm_plane *plane,
+				      struct drm_plane_state *old_state)
+{
+	struct zx_plane *zplane = to_zx_plane(plane);
+	struct drm_framebuffer *fb = plane->state->fb;
+	struct drm_gem_cma_object *cma_obj;
+	void __iomem *layer = zplane->layer;
+	void __iomem *csc = zplane->csc;
+	void __iomem *hbsc = zplane->hbsc;
+	u32 src_x, src_y, src_w, src_h;
+	u32 dst_x, dst_y, dst_w, dst_h;
+	unsigned int depth, bpp;
+	uint32_t format;
+	dma_addr_t paddr;
+	u32 stride;
+	int fmt;
+
+	if (!fb)
+		return;
+
+	format = fb->pixel_format;
+	stride = fb->pitches[0];
+
+	src_x = plane->state->src_x >> 16;
+	src_y = plane->state->src_y >> 16;
+	src_w = plane->state->src_w >> 16;
+	src_h = plane->state->src_h >> 16;
+
+	dst_x = plane->state->crtc_x;
+	dst_y = plane->state->crtc_y;
+	dst_w = plane->state->crtc_w;
+	dst_h = plane->state->crtc_h;
+
+	drm_fb_get_bpp_depth(format, &depth, &bpp);
+
+	cma_obj = drm_fb_cma_get_gem_obj(fb, 0);
+	paddr = cma_obj->paddr + fb->offsets[0];
+	paddr += src_y * stride + src_x * bpp / 8;
+	zx_writel(layer + GL_ADDR, paddr);
+
+	/* Set up source height/width register */
+	zx_writel(layer + GL_SRC_SIZE, GL_SRC_W(src_w) | GL_SRC_H(src_h));
+
+	/* Set up start position register */
+	zx_writel(layer + GL_POS_START, GL_POS_X(dst_x) | GL_POS_Y(dst_y));
+
+	/* Set up end position register */
+	zx_writel(layer + GL_POS_END,
+		  GL_POS_X(dst_x + dst_w) | GL_POS_Y(dst_y + dst_h));
+
+	/* Set up stride register */
+	zx_writel(layer + GL_STRIDE, stride & 0xffff);
+
+	/* Set up graphic layer data format */
+	fmt = zx_gl_get_fmt(format);
+	if (fmt >= 0)
+		zx_writel_mask(layer + GL_CTRL1, GL_DATA_FMT_MASK,
+			       fmt << GL_DATA_FMT_SHIFT);
+
+	/* Initialize global alpha with a sane value */
+	zx_writel_mask(layer + GL_CTRL2, GL_GLOBAL_ALPHA_MASK,
+		       0xff << GL_GLOBAL_ALPHA_SHIFT);
+
+	/* Setup CSC for the GL */
+	if (dst_h > 720)
+		zx_writel_mask(csc + CSC_CTRL0, CSC_COV_MODE_MASK,
+			       CSC_BT709_IMAGE_RGB2YCBCR << CSC_COV_MODE_SHIFT);
+	else
+		zx_writel_mask(csc + CSC_CTRL0, CSC_COV_MODE_MASK,
+			       CSC_BT601_IMAGE_RGB2YCBCR << CSC_COV_MODE_SHIFT);
+	zx_writel_mask(csc + CSC_CTRL0, CSC_WORK_ENABLE, CSC_WORK_ENABLE);
+
+	/* Always use scaler since it exists (set for not bypass) */
+	zx_writel_mask(layer + GL_CTRL3, GL_SCALER_BYPASS_MODE,
+		       GL_SCALER_BYPASS_MODE);
+
+	zx_gl_rsz_setup(zplane, src_w, src_h, dst_w, dst_h);
+
+	/* Enable HBSC block */
+	zx_writel_mask(hbsc + HBSC_CTRL0, HBSC_CTRL_EN, HBSC_CTRL_EN);
+
+	zx_gl_set_update(zplane);
+}
+
+static const struct drm_plane_helper_funcs zx_gl_plane_helper_funcs = {
+	.atomic_check = zx_gl_plane_atomic_check,
+	.atomic_update = zx_gl_plane_atomic_update,
+};
+
+static void zx_plane_destroy(struct drm_plane *plane)
+{
+	drm_plane_helper_disable(plane);
+	drm_plane_cleanup(plane);
+}
+
+static const struct drm_plane_funcs zx_plane_funcs = {
+	.update_plane = drm_atomic_helper_update_plane,
+	.disable_plane = drm_atomic_helper_disable_plane,
+	.destroy = zx_plane_destroy,
+	.reset = drm_atomic_helper_plane_reset,
+	.atomic_duplicate_state = drm_atomic_helper_plane_duplicate_state,
+	.atomic_destroy_state = drm_atomic_helper_plane_destroy_state,
+};
+
+static void zx_plane_hbsc_init(struct zx_plane *zplane)
+{
+	void __iomem *hbsc = zplane->hbsc;
+
+	/*
+	 *  Initialize HBSC block with a sane configuration per recommedation
+	 *  from ZTE BSP code.
+	 */
+	zx_writel(hbsc + HBSC_SATURATION, 0x200);
+	zx_writel(hbsc + HBSC_HUE, 0x0);
+	zx_writel(hbsc + HBSC_BRIGHT, 0x0);
+	zx_writel(hbsc + HBSC_CONTRAST, 0x200);
+
+	zx_writel(hbsc + HBSC_THRESHOLD_COL1, (0x3ac << 16) | 0x40);
+	zx_writel(hbsc + HBSC_THRESHOLD_COL2, (0x3c0 << 16) | 0x40);
+	zx_writel(hbsc + HBSC_THRESHOLD_COL3, (0x3c0 << 16) | 0x40);
+}
+
+struct drm_plane *zx_plane_init(struct drm_device *drm, struct device *dev,
+				struct zx_layer_data *data,
+				enum drm_plane_type type)
+{
+	const struct drm_plane_helper_funcs *helper;
+	struct zx_plane *zplane;
+	struct drm_plane *plane;
+	const uint32_t *formats;
+	unsigned int format_count;
+	int ret;
+
+	zplane = devm_kzalloc(dev, sizeof(*zplane), GFP_KERNEL);
+	if (!zplane)
+		return ERR_PTR(-ENOMEM);
+
+	plane = &zplane->plane;
+
+	zplane->layer = data->layer;
+	zplane->hbsc = data->hbsc;
+	zplane->csc = data->csc;
+	zplane->rsz = data->rsz;
+
+	zx_plane_hbsc_init(zplane);
+
+	switch (type) {
+	case DRM_PLANE_TYPE_PRIMARY:
+		helper = &zx_gl_plane_helper_funcs;
+		formats = gl_formats;
+		format_count = ARRAY_SIZE(gl_formats);
+		break;
+	case DRM_PLANE_TYPE_OVERLAY:
+		/* TODO: add video layer (vl) support */
+		break;
+	default:
+		return ERR_PTR(-ENODEV);
+	}
+
+	ret = drm_universal_plane_init(drm, plane, VOU_CRTC_MASK,
+				       &zx_plane_funcs, formats, format_count,
+				       type, NULL);
+	if (ret) {
+		dev_err(dev, "failed to init universal plane: %d\n", ret);
+		return ERR_PTR(ret);
+	}
+
+	drm_plane_helper_add(plane, helper);
+
+	return plane;
+}
diff --git a/drivers/gpu/drm/zte/zx_plane.h b/drivers/gpu/drm/zte/zx_plane.h
new file mode 100644
index 000000000000..2b82cd558d9d
--- /dev/null
+++ b/drivers/gpu/drm/zte/zx_plane.h
@@ -0,0 +1,26 @@ 
+/*
+ * Copyright 2016 Linaro Ltd.
+ * Copyright 2016 ZTE Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __ZX_PLANE_H__
+#define __ZX_PLANE_H__
+
+struct zx_layer_data {
+	void __iomem *layer;
+	void __iomem *csc;
+	void __iomem *hbsc;
+	void __iomem *rsz;
+};
+
+struct drm_plane *zx_plane_init(struct drm_device *drm, struct device *dev,
+				struct zx_layer_data *data,
+				enum drm_plane_type type);
+void zx_plane_set_update(struct drm_plane *plane);
+
+#endif /* __ZX_PLANE_H__ */
diff --git a/drivers/gpu/drm/zte/zx_vou.c b/drivers/gpu/drm/zte/zx_vou.c
new file mode 100644
index 000000000000..676c750d6009
--- /dev/null
+++ b/drivers/gpu/drm/zte/zx_vou.c
@@ -0,0 +1,799 @@ 
+/*
+ * Copyright 2016 Linaro Ltd.
+ * Copyright 2016 ZTE Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/component.h>
+#include <linux/of_address.h>
+#include <video/videomode.h>
+
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_crtc.h>
+#include <drm/drm_crtc_helper.h>
+#include <drm/drm_fb_cma_helper.h>
+#include <drm/drm_fb_helper.h>
+#include <drm/drm_gem_cma_helper.h>
+#include <drm/drm_of.h>
+#include <drm/drm_plane_helper.h>
+#include <drm/drmP.h>
+
+#include "zx_drm_drv.h"
+#include "zx_plane.h"
+#include "zx_vou.h"
+
+/* Sub-module offset */
+#define MAIN_GL_OFFSET			0x130
+#define MAIN_CSC_OFFSET			0x580
+#define MAIN_HBSC_OFFSET		0x820
+#define MAIN_RSZ_OFFSET			0x600 /* OTFPPU sub-module */
+
+#define AUX_GL_OFFSET			0x200
+#define AUX_CSC_OFFSET			0x5d0
+#define AUX_HBSC_OFFSET			0x860
+#define AUX_RSZ_OFFSET			0x800
+
+/* OSD (GPC_GLOBAL) registers */
+#define OSD_INT_STA			0x04
+#define OSD_INT_CLRSTA			0x08
+#define OSD_INT_MSK			0x0c
+#define OSD_INT_AUX_UPT			BIT(14)
+#define OSD_INT_MAIN_UPT		BIT(13)
+#define OSD_INT_GL1_LBW			BIT(10)
+#define OSD_INT_GL0_LBW			BIT(9)
+#define OSD_INT_VL2_LBW			BIT(8)
+#define OSD_INT_VL1_LBW			BIT(7)
+#define OSD_INT_VL0_LBW			BIT(6)
+#define OSD_INT_BUS_ERR			BIT(3)
+#define OSD_INT_CFG_ERR			BIT(2)
+#define OSD_INT_ERROR (\
+	OSD_INT_GL1_LBW | OSD_INT_GL0_LBW | \
+	OSD_INT_VL2_LBW | OSD_INT_VL1_LBW | OSD_INT_VL0_LBW | \
+	OSD_INT_BUS_ERR | OSD_INT_CFG_ERR \
+)
+#define OSD_INT_ENABLE (OSD_INT_ERROR | OSD_INT_AUX_UPT | OSD_INT_MAIN_UPT)
+#define OSD_CTRL0			0x10
+#define OSD_CTRL0_GL0_EN		BIT(7)
+#define OSD_CTRL0_GL0_SEL		BIT(6)
+#define OSD_CTRL0_GL1_EN		BIT(5)
+#define OSD_CTRL0_GL1_SEL		BIT(4)
+#define OSD_RST_CLR			0x1c
+#define RST_PER_FRAME			BIT(19)
+
+/* Main/Aux channel registers */
+#define OSD_MAIN_CHN			0x470
+#define OSD_AUX_CHN			0x4d0
+#define CHN_CTRL0			0x00
+#define CHN_ENABLE			BIT(0)
+#define CHN_CTRL1			0x04
+#define CHN_SCREEN_W_SHIFT		18
+#define CHN_SCREEN_W_MASK		(0x1fff << CHN_SCREEN_W_SHIFT)
+#define CHN_SCREEN_H_SHIFT		5
+#define CHN_SCREEN_H_MASK		(0x1fff << CHN_SCREEN_H_SHIFT)
+#define CHN_UPDATE			0x08
+
+/* TIMING_CTRL registers */
+#define TIMING_TC_ENABLE		0x04
+#define AUX_TC_EN			BIT(1)
+#define MAIN_TC_EN			BIT(0)
+#define FIR_MAIN_ACTIVE			0x08
+#define FIR_AUX_ACTIVE			0x0c
+#define V_ACTIVE_SHIFT			16
+#define V_ACTIVE_MASK			(0xffff << V_ACTIVE_SHIFT)
+#define H_ACTIVE_SHIFT			0
+#define H_ACTIVE_MASK			(0xffff << H_ACTIVE_SHIFT)
+#define FIR_MAIN_H_TIMING		0x10
+#define FIR_MAIN_V_TIMING		0x14
+#define FIR_AUX_H_TIMING		0x18
+#define FIR_AUX_V_TIMING		0x1c
+#define SYNC_WIDE_SHIFT			22
+#define SYNC_WIDE_MASK			(0x3ff << SYNC_WIDE_SHIFT)
+#define BACK_PORCH_SHIFT		11
+#define BACK_PORCH_MASK			(0x7ff << BACK_PORCH_SHIFT)
+#define FRONT_PORCH_SHIFT		0
+#define FRONT_PORCH_MASK		(0x7ff << FRONT_PORCH_SHIFT)
+#define TIMING_CTRL			0x20
+#define AUX_POL_SHIFT			3
+#define AUX_POL_MASK			(0x7 << AUX_POL_SHIFT)
+#define MAIN_POL_SHIFT			0
+#define MAIN_POL_MASK			(0x7 << MAIN_POL_SHIFT)
+#define POL_DE_SHIFT			2
+#define POL_VSYNC_SHIFT			1
+#define POL_HSYNC_SHIFT			0
+#define TIMING_INT_CTRL			0x24
+#define TIMING_INT_STATE		0x28
+#define TIMING_INT_AUX_FRAME		BIT(3)
+#define TIMING_INT_MAIN_FRAME		BIT(1)
+#define TIMING_INT_AUX_FRAME_SEL_VSW	(0x2 << 10)
+#define TIMING_INT_MAIN_FRAME_SEL_VSW	(0x2 << 6)
+#define TIMING_INT_ENABLE (\
+	TIMING_INT_MAIN_FRAME_SEL_VSW | TIMING_INT_AUX_FRAME_SEL_VSW | \
+	TIMING_INT_MAIN_FRAME | TIMING_INT_AUX_FRAME \
+)
+#define TIMING_MAIN_SHIFT		0x2c
+#define TIMING_AUX_SHIFT		0x30
+#define H_SHIFT_VAL			0x0048
+#define TIMING_MAIN_PI_SHIFT		0x68
+#define TIMING_AUX_PI_SHIFT		0x6c
+#define H_PI_SHIFT_VAL			0x000f
+
+#define V_ACTIVE(x)	(((x) << V_ACTIVE_SHIFT) & V_ACTIVE_MASK)
+#define H_ACTIVE(x)	(((x) << H_ACTIVE_SHIFT) & H_ACTIVE_MASK)
+
+#define SYNC_WIDE(x)	(((x) << SYNC_WIDE_SHIFT) & SYNC_WIDE_MASK)
+#define BACK_PORCH(x)	(((x) << BACK_PORCH_SHIFT) & BACK_PORCH_MASK)
+#define FRONT_PORCH(x)	(((x) << FRONT_PORCH_SHIFT) & FRONT_PORCH_MASK)
+
+/* DTRC registers */
+#define DTRC_F0_CTRL			0x2c
+#define DTRC_F1_CTRL			0x5c
+#define DTRC_DECOMPRESS_BYPASS		BIT(17)
+#define DTRC_DETILE_CTRL		0x68
+#define TILE2RASTESCAN_BYPASS_MODE	BIT(30)
+#define DETILE_ARIDR_MODE_MASK		(0x3 << 0)
+#define DETILE_ARID_ALL			0
+#define DETILE_ARID_IN_ARIDR		1
+#define DETILE_ARID_BYP_BUT_ARIDR	2
+#define DETILE_ARID_IN_ARIDR2		3
+#define DTRC_ARID			0x6c
+#define DTRC_ARID3_SHIFT		24
+#define DTRC_ARID3_MASK			(0xff << DTRC_ARID3_SHIFT)
+#define DTRC_ARID2_SHIFT		16
+#define DTRC_ARID2_MASK			(0xff << DTRC_ARID2_SHIFT)
+#define DTRC_ARID1_SHIFT		8
+#define DTRC_ARID1_MASK			(0xff << DTRC_ARID1_SHIFT)
+#define DTRC_ARID0_SHIFT		0
+#define DTRC_ARID0_MASK			(0xff << DTRC_ARID0_SHIFT)
+#define DTRC_DEC2DDR_ARID		0x70
+
+#define DTRC_ARID3(x)	(((x) << DTRC_ARID3_SHIFT) & DTRC_ARID3_MASK)
+#define DTRC_ARID2(x)	(((x) << DTRC_ARID2_SHIFT) & DTRC_ARID2_MASK)
+#define DTRC_ARID1(x)	(((x) << DTRC_ARID1_SHIFT) & DTRC_ARID1_MASK)
+#define DTRC_ARID0(x)	(((x) << DTRC_ARID0_SHIFT) & DTRC_ARID0_MASK)
+
+/* VOU_CTRL registers */
+#define VOU_INF_EN			0x00
+#define VOU_INF_CH_SEL			0x04
+#define VOU_INF_DATA_SEL		0x08
+#define VOU_SOFT_RST			0x14
+#define VOU_CLK_SEL			0x18
+#define VOU_CLK_GL1_SEL			BIT(5)
+#define VOU_CLK_GL0_SEL			BIT(4)
+#define VOU_CLK_REQEN			0x20
+#define VOU_CLK_EN			0x24
+
+/* OTFPPU_CTRL registers */
+#define OTFPPU_RSZ_DATA_SOURCE		0x04
+
+#define GL_NUM				2
+#define VL_NUM				3
+
+enum vou_chn_type {
+	VOU_CHN_MAIN,
+	VOU_CHN_AUX,
+};
+
+struct zx_crtc_regs {
+	u32 fir_active;
+	u32 fir_htiming;
+	u32 fir_vtiming;
+	u32 timing_shift;
+	u32 timing_pi_shift;
+};
+
+static const struct zx_crtc_regs main_crtc_regs = {
+	.fir_active = FIR_MAIN_ACTIVE,
+	.fir_htiming = FIR_MAIN_H_TIMING,
+	.fir_vtiming = FIR_MAIN_V_TIMING,
+	.timing_shift = TIMING_MAIN_SHIFT,
+	.timing_pi_shift = TIMING_MAIN_PI_SHIFT,
+};
+
+static const struct zx_crtc_regs aux_crtc_regs = {
+	.fir_active = FIR_AUX_ACTIVE,
+	.fir_htiming = FIR_AUX_H_TIMING,
+	.fir_vtiming = FIR_AUX_V_TIMING,
+	.timing_shift = TIMING_AUX_SHIFT,
+	.timing_pi_shift = TIMING_AUX_PI_SHIFT,
+};
+
+struct zx_crtc_bits {
+	u32 polarity_mask;
+	u32 polarity_shift;
+	u32 tc_enable;
+	u32 gl_enable;
+};
+
+static const struct zx_crtc_bits main_crtc_bits = {
+	.polarity_mask = MAIN_POL_MASK,
+	.polarity_shift = MAIN_POL_SHIFT,
+	.tc_enable = MAIN_TC_EN,
+	.gl_enable = OSD_CTRL0_GL0_EN,
+};
+
+static const struct zx_crtc_bits aux_crtc_bits = {
+	.polarity_mask = AUX_POL_MASK,
+	.polarity_shift = AUX_POL_SHIFT,
+	.tc_enable = AUX_TC_EN,
+	.gl_enable = OSD_CTRL0_GL1_EN,
+};
+
+struct zx_crtc {
+	struct drm_crtc crtc;
+	struct drm_plane *primary;
+	struct zx_vou_hw *vou;
+	void __iomem *chnreg;
+	const struct zx_crtc_regs *regs;
+	const struct zx_crtc_bits *bits;
+	enum vou_chn_type chn_type;
+	struct clk *pixclk;
+};
+
+#define to_zx_crtc(x) container_of(x, struct zx_crtc, crtc)
+
+struct zx_vou_hw {
+	struct device *dev;
+	void __iomem *osd;
+	void __iomem *timing;
+	void __iomem *vouctl;
+	void __iomem *otfppu;
+	void __iomem *dtrc;
+	struct clk *axi_clk;
+	struct clk *ppu_clk;
+	struct clk *main_clk;
+	struct clk *aux_clk;
+	struct zx_crtc *main_crtc;
+	struct zx_crtc *aux_crtc;
+};
+
+static inline struct zx_vou_hw *crtc_to_vou(struct drm_crtc *crtc)
+{
+	struct zx_crtc *zcrtc = to_zx_crtc(crtc);
+
+	return zcrtc->vou;
+}
+
+void vou_inf_enable(const struct vou_inf *inf, struct drm_crtc *crtc)
+{
+	struct zx_crtc *zcrtc = to_zx_crtc(crtc);
+	struct zx_vou_hw *vou = zcrtc->vou;
+	bool is_main = zcrtc->chn_type == VOU_CHN_MAIN;
+	u32 data_sel_shift = inf->id << 1;
+
+	/* Select data format */
+	zx_writel_mask(vou->vouctl + VOU_INF_DATA_SEL, 0x3 << data_sel_shift,
+		       inf->data_sel << data_sel_shift);
+
+	/* Select channel */
+	zx_writel_mask(vou->vouctl + VOU_INF_CH_SEL, 0x1 << inf->id,
+		       zcrtc->chn_type << inf->id);
+
+	/* Select interface clocks */
+	zx_writel_mask(vou->vouctl + VOU_CLK_SEL, inf->clocks_sel_bits,
+		       is_main ? 0 : inf->clocks_sel_bits);
+
+	/* Enable interface clocks */
+	zx_writel_mask(vou->vouctl + VOU_CLK_EN, inf->clocks_en_bits,
+		       inf->clocks_en_bits);
+
+	/* Enable the device */
+	zx_writel_mask(vou->vouctl + VOU_INF_EN, 1 << inf->id, 1 << inf->id);
+}
+
+void vou_inf_disable(const struct vou_inf *inf, struct drm_crtc *crtc)
+{
+	struct zx_vou_hw *vou = crtc_to_vou(crtc);
+
+	/* Disable the device */
+	zx_writel_mask(vou->vouctl + VOU_INF_EN, 1 << inf->id, 0);
+
+	/* Disable interface clocks */
+	zx_writel_mask(vou->vouctl + VOU_CLK_EN, inf->clocks_en_bits, 0);
+}
+
+static inline void vou_chn_set_update(struct zx_crtc *zcrtc)
+{
+	zx_writel(zcrtc->chnreg + CHN_UPDATE, 1);
+}
+
+static void zx_crtc_enable(struct drm_crtc *crtc)
+{
+	struct drm_display_mode *mode = &crtc->state->adjusted_mode;
+	struct zx_crtc *zcrtc = to_zx_crtc(crtc);
+	struct zx_vou_hw *vou = zcrtc->vou;
+	const struct zx_crtc_regs *regs = zcrtc->regs;
+	const struct zx_crtc_bits *bits = zcrtc->bits;
+	struct videomode vm;
+	u32 pol = 0;
+	u32 val;
+	int ret;
+
+	drm_display_mode_to_videomode(mode, &vm);
+
+	/* Set up timing parameters */
+	val = V_ACTIVE(vm.vactive - 1);
+	val |= H_ACTIVE(vm.hactive - 1);
+	zx_writel(vou->timing + regs->fir_active, val);
+
+	val = SYNC_WIDE(vm.hsync_len - 1);
+	val |= BACK_PORCH(vm.hback_porch - 1);
+	val |= FRONT_PORCH(vm.hfront_porch - 1);
+	zx_writel(vou->timing + regs->fir_htiming, val);
+
+	val = SYNC_WIDE(vm.vsync_len - 1);
+	val |= BACK_PORCH(vm.vback_porch - 1);
+	val |= FRONT_PORCH(vm.vfront_porch - 1);
+	zx_writel(vou->timing + regs->fir_vtiming, val);
+
+	/* Set up polarities */
+	if (vm.flags & DISPLAY_FLAGS_VSYNC_LOW)
+		pol |= 1 << POL_VSYNC_SHIFT;
+	if (vm.flags & DISPLAY_FLAGS_HSYNC_LOW)
+		pol |= 1 << POL_HSYNC_SHIFT;
+
+	zx_writel_mask(vou->timing + TIMING_CTRL, bits->polarity_mask,
+		       pol << bits->polarity_shift);
+
+	/* Setup SHIFT register by following what ZTE BSP does */
+	zx_writel(vou->timing + regs->timing_shift, H_SHIFT_VAL);
+	zx_writel(vou->timing + regs->timing_pi_shift, H_PI_SHIFT_VAL);
+
+	/* Enable TIMING_CTRL */
+	zx_writel_mask(vou->timing + TIMING_TC_ENABLE, bits->tc_enable,
+		       bits->tc_enable);
+
+	/* Configure channel screen size */
+	zx_writel_mask(zcrtc->chnreg + CHN_CTRL1, CHN_SCREEN_W_MASK,
+		       vm.hactive << CHN_SCREEN_W_SHIFT);
+	zx_writel_mask(zcrtc->chnreg + CHN_CTRL1, CHN_SCREEN_H_MASK,
+		       vm.vactive << CHN_SCREEN_H_SHIFT);
+
+	/* Update channel */
+	vou_chn_set_update(zcrtc);
+
+	/* Enable channel */
+	zx_writel_mask(zcrtc->chnreg + CHN_CTRL0, CHN_ENABLE, CHN_ENABLE);
+
+	/* Enable Graphic Layer */
+	zx_writel_mask(vou->osd + OSD_CTRL0, bits->gl_enable,
+		       bits->gl_enable);
+
+	drm_crtc_vblank_on(crtc);
+
+	ret = clk_set_rate(zcrtc->pixclk, mode->clock * 1000);
+	if (ret) {
+		dev_warn(vou->dev, "failed to set pixclk rate: %d\n", ret);
+		return;
+	}
+
+	ret = clk_prepare_enable(zcrtc->pixclk);
+	if (ret)
+		dev_warn(vou->dev, "failed to enable pixclk: %d\n", ret);
+}
+
+static void zx_crtc_disable(struct drm_crtc *crtc)
+{
+	struct zx_crtc *zcrtc = to_zx_crtc(crtc);
+	const struct zx_crtc_bits *bits = zcrtc->bits;
+	struct zx_vou_hw *vou = zcrtc->vou;
+
+	clk_disable_unprepare(zcrtc->pixclk);
+
+	drm_crtc_vblank_off(crtc);
+
+	/* Disable Graphic Layer */
+	zx_writel_mask(vou->osd + OSD_CTRL0, bits->gl_enable, 0);
+
+	/* Disable channel */
+	zx_writel_mask(zcrtc->chnreg + CHN_CTRL0, CHN_ENABLE, 0);
+
+	/* Disable TIMING_CTRL */
+	zx_writel_mask(vou->timing + TIMING_TC_ENABLE, bits->tc_enable, 0);
+}
+
+static void zx_crtc_atomic_begin(struct drm_crtc *crtc,
+				 struct drm_crtc_state *state)
+{
+	struct drm_pending_vblank_event *event = crtc->state->event;
+
+	if (!event)
+		return;
+
+	crtc->state->event = NULL;
+
+	spin_lock_irq(&crtc->dev->event_lock);
+	if (drm_crtc_vblank_get(crtc) == 0)
+		drm_crtc_arm_vblank_event(crtc, event);
+	else
+		drm_crtc_send_vblank_event(crtc, event);
+	spin_unlock_irq(&crtc->dev->event_lock);
+}
+
+static const struct drm_crtc_helper_funcs zx_crtc_helper_funcs = {
+	.enable = zx_crtc_enable,
+	.disable = zx_crtc_disable,
+	.atomic_begin = zx_crtc_atomic_begin,
+};
+
+static const struct drm_crtc_funcs zx_crtc_funcs = {
+	.destroy = drm_crtc_cleanup,
+	.set_config = drm_atomic_helper_set_config,
+	.page_flip = drm_atomic_helper_page_flip,
+	.reset = drm_atomic_helper_crtc_reset,
+	.atomic_duplicate_state = drm_atomic_helper_crtc_duplicate_state,
+	.atomic_destroy_state = drm_atomic_helper_crtc_destroy_state,
+};
+
+static int zx_crtc_init(struct drm_device *drm, struct zx_vou_hw *vou,
+			enum vou_chn_type chn_type)
+{
+	struct device *dev = vou->dev;
+	struct zx_layer_data data;
+	struct zx_crtc *zcrtc;
+	int ret;
+
+	zcrtc = devm_kzalloc(dev, sizeof(*zcrtc), GFP_KERNEL);
+	if (!zcrtc)
+		return -ENOMEM;
+
+	zcrtc->vou = vou;
+	zcrtc->chn_type = chn_type;
+
+	if (chn_type == VOU_CHN_MAIN) {
+		data.layer = vou->osd + MAIN_GL_OFFSET;
+		data.csc = vou->osd + MAIN_CSC_OFFSET;
+		data.hbsc = vou->osd + MAIN_HBSC_OFFSET;
+		data.rsz = vou->otfppu + MAIN_RSZ_OFFSET;
+		zcrtc->chnreg = vou->osd + OSD_MAIN_CHN;
+		zcrtc->regs = &main_crtc_regs;
+		zcrtc->bits = &main_crtc_bits;
+	} else {
+		data.layer = vou->osd + AUX_GL_OFFSET;
+		data.csc = vou->osd + AUX_CSC_OFFSET;
+		data.hbsc = vou->osd + AUX_HBSC_OFFSET;
+		data.rsz = vou->otfppu + AUX_RSZ_OFFSET;
+		zcrtc->chnreg = vou->osd + OSD_AUX_CHN;
+		zcrtc->regs = &aux_crtc_regs;
+		zcrtc->bits = &aux_crtc_bits;
+	}
+
+	zcrtc->pixclk = devm_clk_get(dev, (chn_type == VOU_CHN_MAIN) ?
+					  "main_wclk" : "aux_wclk");
+	if (IS_ERR(zcrtc->pixclk)) {
+		ret = PTR_ERR(zcrtc->pixclk);
+		dev_err(dev, "failed to get pix clk: %d\n", ret);
+		return ret;
+	}
+
+	zcrtc->primary = zx_plane_init(drm, dev, &data, DRM_PLANE_TYPE_PRIMARY);
+	if (IS_ERR(zcrtc->primary)) {
+		ret = PTR_ERR(zcrtc->primary);
+		dev_err(dev, "failed to init primary plane: %d\n", ret);
+		return ret;
+	}
+
+	ret = drm_crtc_init_with_planes(drm, &zcrtc->crtc, zcrtc->primary, NULL,
+					&zx_crtc_funcs, NULL);
+	if (ret) {
+		dev_err(dev, "failed to init drm crtc: %d\n", ret);
+		return ret;
+	}
+
+	drm_crtc_helper_add(&zcrtc->crtc, &zx_crtc_helper_funcs);
+
+	if (chn_type == VOU_CHN_MAIN)
+		vou->main_crtc = zcrtc;
+	else
+		vou->aux_crtc = zcrtc;
+
+	return 0;
+}
+
+static inline struct drm_crtc *zx_find_crtc(struct drm_device *drm, int pipe)
+{
+	struct drm_crtc *crtc;
+	int i = 0;
+
+	list_for_each_entry(crtc, &drm->mode_config.crtc_list, head)
+		if (i++ == pipe)
+			return crtc;
+
+	return NULL;
+}
+
+int zx_vou_enable_vblank(struct drm_device *drm, unsigned int pipe)
+{
+	struct drm_crtc *crtc;
+	struct zx_vou_hw *vou;
+
+	crtc = zx_find_crtc(drm, pipe);
+	if (!crtc)
+		return 0;
+
+	vou = crtc_to_vou(crtc);
+
+	if (pipe == 0)
+		zx_writel_mask(vou->timing + TIMING_INT_CTRL,
+			       TIMING_INT_MAIN_FRAME, TIMING_INT_MAIN_FRAME);
+	else
+		zx_writel_mask(vou->timing + TIMING_INT_CTRL,
+			       TIMING_INT_AUX_FRAME, TIMING_INT_AUX_FRAME);
+
+	return 0;
+}
+
+void zx_vou_disable_vblank(struct drm_device *drm, unsigned int pipe)
+{
+	struct drm_crtc *crtc;
+	struct zx_vou_hw *vou;
+
+	crtc = zx_find_crtc(drm, pipe);
+	if (!crtc)
+		return;
+
+	vou = crtc_to_vou(crtc);
+
+	if (pipe == 0)
+		zx_writel_mask(vou->timing + TIMING_INT_CTRL,
+			       TIMING_INT_MAIN_FRAME, 0);
+	else
+		zx_writel_mask(vou->timing + TIMING_INT_CTRL,
+			       TIMING_INT_AUX_FRAME, 0);
+}
+
+static irqreturn_t vou_irq_handler(int irq, void *dev_id)
+{
+	struct zx_vou_hw *vou = dev_id;
+	u32 state;
+
+	/* Handle TIMING_CTRL frame interrupts */
+	state = zx_readl(vou->timing + TIMING_INT_STATE);
+	zx_writel(vou->timing + TIMING_INT_STATE, state);
+
+	if (state & TIMING_INT_MAIN_FRAME)
+		drm_crtc_handle_vblank(&vou->main_crtc->crtc);
+
+	if (state & TIMING_INT_AUX_FRAME)
+		drm_crtc_handle_vblank(&vou->aux_crtc->crtc);
+
+	/* Handle OSD interrupts */
+	state = zx_readl(vou->osd + OSD_INT_STA);
+	zx_writel(vou->osd + OSD_INT_CLRSTA, state);
+
+	if (state & OSD_INT_MAIN_UPT) {
+		vou_chn_set_update(vou->main_crtc);
+		zx_plane_set_update(vou->main_crtc->primary);
+	}
+
+	if (state & OSD_INT_AUX_UPT) {
+		vou_chn_set_update(vou->aux_crtc);
+		zx_plane_set_update(vou->aux_crtc->primary);
+	}
+
+	if (state & OSD_INT_ERROR)
+		dev_err(vou->dev, "OSD ERROR: 0x%08x!\n", state);
+
+	return IRQ_HANDLED;
+}
+
+static void vou_dtrc_init(struct zx_vou_hw *vou)
+{
+	/* Clear bit for bypass by ID */
+	zx_writel_mask(vou->dtrc + DTRC_DETILE_CTRL,
+		       TILE2RASTESCAN_BYPASS_MODE, 0);
+
+	/* Select ARIDR mode */
+	zx_writel_mask(vou->dtrc + DTRC_DETILE_CTRL, DETILE_ARIDR_MODE_MASK,
+		       DETILE_ARID_IN_ARIDR);
+
+	/* Bypass decompression for both frames */
+	zx_writel_mask(vou->dtrc + DTRC_F0_CTRL, DTRC_DECOMPRESS_BYPASS,
+		       DTRC_DECOMPRESS_BYPASS);
+	zx_writel_mask(vou->dtrc + DTRC_F1_CTRL, DTRC_DECOMPRESS_BYPASS,
+		       DTRC_DECOMPRESS_BYPASS);
+
+	/* Set up ARID register */
+	zx_writel(vou->dtrc + DTRC_ARID, DTRC_ARID3(0xf) | DTRC_ARID2(0xe) |
+		  DTRC_ARID1(0xf) | DTRC_ARID0(0xe));
+}
+
+static void vou_hw_init(struct zx_vou_hw *vou)
+{
+	/* Set GL0 to main channel and GL1 to aux channel */
+	zx_writel_mask(vou->osd + OSD_CTRL0, OSD_CTRL0_GL0_SEL, 0);
+	zx_writel_mask(vou->osd + OSD_CTRL0, OSD_CTRL0_GL1_SEL,
+		       OSD_CTRL0_GL1_SEL);
+
+	/* Release reset for all VOU modules */
+	zx_writel(vou->vouctl + VOU_SOFT_RST, ~0);
+
+	/* Select main clock for GL0 and aux clock for GL1 module */
+	zx_writel_mask(vou->vouctl + VOU_CLK_SEL, VOU_CLK_GL0_SEL, 0);
+	zx_writel_mask(vou->vouctl + VOU_CLK_SEL, VOU_CLK_GL1_SEL,
+		       VOU_CLK_GL1_SEL);
+
+	/* Enable clock auto-gating for all VOU modules */
+	zx_writel(vou->vouctl + VOU_CLK_REQEN, ~0);
+
+	/* Enable all VOU module clocks */
+	zx_writel(vou->vouctl + VOU_CLK_EN, ~0);
+
+	/* Clear both OSD and TIMING_CTRL interrupt state */
+	zx_writel(vou->osd + OSD_INT_CLRSTA, ~0);
+	zx_writel(vou->timing + TIMING_INT_STATE, ~0);
+
+	/* Enable OSD and TIMING_CTRL interrrupts */
+	zx_writel(vou->osd + OSD_INT_MSK, OSD_INT_ENABLE);
+	zx_writel(vou->timing + TIMING_INT_CTRL, TIMING_INT_ENABLE);
+
+	/* Select GPC as input to gl/vl scaler as a sane default setting */
+	zx_writel(vou->otfppu + OTFPPU_RSZ_DATA_SOURCE, 0x2a);
+
+	/*
+	 * Needs to reset channel and layer logic per frame when frame starts
+	 * to get VOU work properly.
+	 */
+	zx_writel_mask(vou->osd + OSD_RST_CLR, RST_PER_FRAME, RST_PER_FRAME);
+
+	vou_dtrc_init(vou);
+}
+
+static int zx_crtc_bind(struct device *dev, struct device *master, void *data)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct drm_device *drm = data;
+	struct zx_vou_hw *vou;
+	struct resource *res;
+	int irq;
+	int ret;
+
+	vou = devm_kzalloc(dev, sizeof(*vou), GFP_KERNEL);
+	if (!vou)
+		return -ENOMEM;
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "osd");
+	vou->osd = devm_ioremap_resource(dev, res);
+	if (IS_ERR(vou->osd)) {
+		ret = PTR_ERR(vou->osd);
+		dev_err(dev, "failed to remap osd region: %d\n", ret);
+		return ret;
+	}
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "timing_ctrl");
+	vou->timing = devm_ioremap_resource(dev, res);
+	if (IS_ERR(vou->timing)) {
+		ret = PTR_ERR(vou->timing);
+		dev_err(dev, "failed to remap timing_ctrl region: %d\n", ret);
+		return ret;
+	}
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dtrc");
+	vou->dtrc = devm_ioremap_resource(dev, res);
+	if (IS_ERR(vou->dtrc)) {
+		ret = PTR_ERR(vou->dtrc);
+		dev_err(dev, "failed to remap dtrc region: %d\n", ret);
+		return ret;
+	}
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "vou_ctrl");
+	vou->vouctl = devm_ioremap_resource(dev, res);
+	if (IS_ERR(vou->vouctl)) {
+		ret = PTR_ERR(vou->vouctl);
+		dev_err(dev, "failed to remap vou_ctrl region: %d\n", ret);
+		return ret;
+	}
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "otfppu");
+	vou->otfppu = devm_ioremap_resource(dev, res);
+	if (IS_ERR(vou->otfppu)) {
+		ret = PTR_ERR(vou->otfppu);
+		dev_err(dev, "failed to remap otfppu region: %d\n", ret);
+		return ret;
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
+
+	vou->axi_clk = devm_clk_get(dev, "aclk");
+	if (IS_ERR(vou->axi_clk)) {
+		ret = PTR_ERR(vou->axi_clk);
+		dev_err(dev, "failed to get axi_clk: %d\n", ret);
+		return ret;
+	}
+
+	vou->ppu_clk = devm_clk_get(dev, "ppu_wclk");
+	if (IS_ERR(vou->ppu_clk)) {
+		ret = PTR_ERR(vou->ppu_clk);
+		dev_err(dev, "failed to get ppu_clk: %d\n", ret);
+		return ret;
+	}
+
+	ret = clk_prepare_enable(vou->axi_clk);
+	if (ret) {
+		dev_err(dev, "failed to enable axi_clk: %d\n", ret);
+		return ret;
+	}
+
+	clk_prepare_enable(vou->ppu_clk);
+	if (ret) {
+		dev_err(dev, "failed to enable ppu_clk: %d\n", ret);
+		goto disable_axi_clk;
+	}
+
+	vou->dev = dev;
+	dev_set_drvdata(dev, vou);
+
+	vou_hw_init(vou);
+
+	ret = devm_request_irq(dev, irq, vou_irq_handler, 0, "zx_vou", vou);
+	if (ret < 0) {
+		dev_err(dev, "failed to request vou irq: %d\n", ret);
+		goto disable_ppu_clk;
+	}
+
+	ret = zx_crtc_init(drm, vou, VOU_CHN_MAIN);
+	if (ret) {
+		dev_err(dev, "failed to init main channel crtc: %d\n", ret);
+		goto disable_ppu_clk;
+	}
+
+	ret = zx_crtc_init(drm, vou, VOU_CHN_AUX);
+	if (ret) {
+		dev_err(dev, "failed to init aux channel crtc: %d\n", ret);
+		goto disable_ppu_clk;
+	}
+
+	return 0;
+
+disable_ppu_clk:
+	clk_disable_unprepare(vou->ppu_clk);
+disable_axi_clk:
+	clk_disable_unprepare(vou->axi_clk);
+	return ret;
+}
+
+static void zx_crtc_unbind(struct device *dev, struct device *master,
+			   void *data)
+{
+	struct zx_vou_hw *vou = dev_get_drvdata(dev);
+
+	clk_disable_unprepare(vou->axi_clk);
+	clk_disable_unprepare(vou->ppu_clk);
+}
+
+static const struct component_ops zx_crtc_component_ops = {
+	.bind = zx_crtc_bind,
+	.unbind = zx_crtc_unbind,
+};
+
+static int zx_crtc_probe(struct platform_device *pdev)
+{
+	return component_add(&pdev->dev, &zx_crtc_component_ops);
+}
+
+static int zx_crtc_remove(struct platform_device *pdev)
+{
+	component_del(&pdev->dev, &zx_crtc_component_ops);
+	return 0;
+}
+
+static const struct of_device_id zx_crtc_of_match[] = {
+	{ .compatible = "zte,zx296718-dpc", },
+	{ /* end */ },
+};
+MODULE_DEVICE_TABLE(of, zx_crtc_of_match);
+
+struct platform_driver zx_crtc_driver = {
+	.probe = zx_crtc_probe,
+	.remove = zx_crtc_remove,
+	.driver	= {
+		.name = "zx-crtc",
+		.of_match_table	= zx_crtc_of_match,
+	},
+};
diff --git a/drivers/gpu/drm/zte/zx_vou.h b/drivers/gpu/drm/zte/zx_vou.h
new file mode 100644
index 000000000000..349e06cd86f4
--- /dev/null
+++ b/drivers/gpu/drm/zte/zx_vou.h
@@ -0,0 +1,46 @@ 
+/*
+ * Copyright 2016 Linaro Ltd.
+ * Copyright 2016 ZTE Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __ZX_VOU_H__
+#define __ZX_VOU_H__
+
+#define VOU_CRTC_MASK		0x3
+
+/* VOU output interfaces */
+enum vou_inf_id {
+	VOU_HDMI	= 0,
+	VOU_RGB_LCD	= 1,
+	VOU_TV_ENC	= 2,
+	VOU_MIPI_DSI	= 3,
+	VOU_LVDS	= 4,
+	VOU_VGA		= 5,
+};
+
+enum vou_inf_data_sel {
+	VOU_YUV444	= 0,
+	VOU_RGB_101010	= 1,
+	VOU_RGB_888	= 2,
+	VOU_RGB_666	= 3,
+};
+
+struct vou_inf {
+	enum vou_inf_id id;
+	enum vou_inf_data_sel data_sel;
+	u32 clocks_en_bits;
+	u32 clocks_sel_bits;
+};
+
+void vou_inf_enable(const struct vou_inf *inf, struct drm_crtc *crtc);
+void vou_inf_disable(const struct vou_inf *inf, struct drm_crtc *crtc);
+
+int zx_vou_enable_vblank(struct drm_device *drm, unsigned int pipe);
+void zx_vou_disable_vblank(struct drm_device *drm, unsigned int pipe);
+
+#endif /* __ZX_VOU_H__ */