[2/2] ARM64: dts: rockchip: use pin constants to describe gpios

Message ID	1477141144-6989-1-git-send-email-andy.yan@rock-chips.com (mailing list archive)
State	New, archived
Headers	show Return-Path: <linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org> From: Andy Yan <andy.yan@rock-chips.com> To: heiko@sntech.de, linux-kernel@vger.kernel.org Subject: [PATCH 2/2] ARM64: dts: rockchip: use pin constants to describe gpios Date: Sat, 22 Oct 2016 20:59:04 +0800 Message-Id: <1477141144-6989-1-git-send-email-andy.yan@rock-chips.com> In-Reply-To: <1477140706-6886-1-git-send-email-andy.yan@rock-chips.com> References: <1477140706-6886-1-git-send-email-andy.yan@rock-chips.com> Precedence: list Cc: mark.rutland@arm.com, devicetree@vger.kernel.org, arnd@arndb.de, will.deacon@arm.com, linux@armlinux.org.uk, linux-rockchip@lists.infradead.org, robh+dt@kernel.org, Andy Yan <andy.yan@rock-chips.com>, linux-arm-kernel@lists.infradead.org MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "linux-arm-kernel" <linux-arm-kernel-bounces@lists.infradead.org> Errors-To: linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org

diff --git a/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi b/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi index fff8b19..4772917 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi @@ -90,7 +90,7 @@ 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255>; default-brightness-level = <128>; - enable-gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>; + enable-gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&bl_en>; pwms = <&pwm0 0 1000000 PWM_POLARITY_INVERTED>; @@ -101,7 +101,7 @@ compatible = "mmc-pwrseq-emmc"; pinctrl-0 = <&emmc_reset>; pinctrl-names = "default"; - reset-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio2 RK_PA3 GPIO_ACTIVE_HIGH>; }; keys: gpio-keys { @@ -111,7 +111,7 @@ power { wakeup-source; - gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; + gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>; label = "GPIO Power"; linux,code = <KEY_POWER>; }; @@ -121,7 +121,7 @@ vcc_host: vcc-host-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio0 4 GPIO_ACTIVE_HIGH>; + gpio = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&host_vbus_drv>; regulator-name = "vcc_host"; @@ -166,7 +166,7 @@ phy-supply = <&vcc_lan>; phy-mode = "rmii"; clock_in_out = "output"; - snps,reset-gpio = <&gpio3 12 0>; + snps,reset-gpio = <&gpio3 RK_PB4 GPIO_ACTIVE_HIGH>; snps,reset-active-low; snps,reset-delays-us = <0 10000 1000000>; pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts b/arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts index e5eeca2..e5b92d2 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts +++ b/arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts @@ -66,7 +66,7 @@ ir: ir-receiver { compatible = "gpio-ir-receiver"; - gpios = <&gpio3 30 GPIO_ACTIVE_LOW>; + gpios = <&gpio3 RK_PD6 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&ir_int>; }; @@ -77,7 +77,7 @@ pinctrl-0 = <&pwr_key>; power { - gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; + gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>; label = "GPIO Power"; linux,code = <KEY_POWER>; wakeup-source; @@ -88,13 +88,13 @@ compatible = "gpio-leds"; blue { - gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>; + gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_HIGH>; label = "geekbox:blue:led"; default-state = "on"; }; red { - gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>; + gpios = <&gpio2 RK_PA3 GPIO_ACTIVE_HIGH>; label = "geekbox:red:led"; default-state = "off"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts b/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts index ea0a8ec..2e431f13 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts +++ b/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts @@ -61,7 +61,7 @@ compatible = "mmc-pwrseq-emmc"; pinctrl-0 = <&emmc_reset>; pinctrl-names = "default"; - reset-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio2 RK_PA3 GPIO_ACTIVE_HIGH>; }; ext_gmac: external-gmac-clock { @@ -78,7 +78,7 @@ power { wakeup-source; - gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>; + gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>; label = "GPIO Power"; linux,code = <KEY_POWER>; }; @@ -88,7 +88,7 @@ compatible = "gpio-leds"; red { - gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>; + gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_HIGH>; label = "orion:red:led"; pinctrl-names = "default"; pinctrl-0 = <&led_ctl>; @@ -96,7 +96,7 @@ }; blue { - gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; + gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>; label = "orion:blue:led"; pinctrl-names = "default"; pinctrl-0 = <&stby_pwren>; @@ -117,7 +117,7 @@ /* supplies both host and otg */ vcc_host: vcc-host-regulator { compatible = "regulator-fixed"; - gpio = <&gpio0 4 GPIO_ACTIVE_LOW>; + gpio = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&host_vbus_drv>; regulator-name = "vcc_host"; @@ -149,7 +149,7 @@ vcc_sd: vcc-sd-regulator { compatible = "regulator-fixed"; regulator-name = "vcc_sd"; - gpio = <&gpio3 11 GPIO_ACTIVE_LOW>; + gpio = <&gpio3 RK_PB3 GPIO_ACTIVE_LOW>; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; vin-supply = <&vcc_io>; @@ -217,7 +217,7 @@ phy-mode = "rgmii"; pinctrl-names = "default"; pinctrl-0 = <&rgmii_pins>; - snps,reset-gpio = <&gpio3 12 0>; + snps,reset-gpio = <&gpio3 RK_PB4 GPIO_ACTIVE_HIGH>; snps,reset-active-low; snps,reset-delays-us = <0 10000 1000000>; tx_delay = <0x30>; diff --git a/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts b/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts index 85f7a24..62919c4 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts +++ b/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts @@ -63,7 +63,7 @@ pinctrl-0 = <&pwr_key>; power { - gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; + gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>; label = "GPIO Power"; linux,code = <KEY_POWER>; wakeup-source; @@ -248,7 +248,7 @@ reg = <0x40>; interrupt-parent = <&gpio3>; interrupts = <28 IRQ_TYPE_EDGE_FALLING>; - power-gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>; + power-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_HIGH>; touchscreen-size-x = <800>; touchscreen-size-y = <1280>; silead,max-fingers = <5>; diff --git a/arch/arm64/boot/dts/rockchip/rk3368-r88.dts b/arch/arm64/boot/dts/rockchip/rk3368-r88.dts index eed1ef6..7134181 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368-r88.dts +++ b/arch/arm64/boot/dts/rockchip/rk3368-r88.dts @@ -61,7 +61,7 @@ compatible = "mmc-pwrseq-emmc"; pinctrl-0 = <&emmc_reset>; pinctrl-names = "default"; - reset-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio2 RK_PA3 GPIO_ACTIVE_HIGH>; }; keys: gpio-keys { @@ -71,7 +71,7 @@ power { wakeup-source; - gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; + gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>; label = "GPIO Power"; linux,code = <KEY_POWER>; }; @@ -81,7 +81,7 @@ compatible = "gpio-leds"; work { - gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>; + gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_HIGH>; label = "r88:green:led"; pinctrl-names = "default"; pinctrl-0 = <&led_ctl>; @@ -90,7 +90,7 @@ ir: ir-receiver { compatible = "gpio-ir-receiver"; - gpios = <&gpio3 30 GPIO_ACTIVE_LOW>; + gpios = <&gpio3 RK_PD6 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&ir_int>; }; @@ -104,10 +104,10 @@ reset-gpios = /* BT_RST_N */ - <&gpio3 5 GPIO_ACTIVE_LOW>, + <&gpio3 RK_PA5 GPIO_ACTIVE_LOW>, /* WL_REG_ON */ - <&gpio3 4 GPIO_ACTIVE_LOW>; + <&gpio3 RK_PA4 GPIO_ACTIVE_LOW>; }; vcc_18: vcc18-regulator { @@ -124,7 +124,7 @@ vcc_host: vcc-host-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio0 4 GPIO_ACTIVE_HIGH>; + gpio = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&host_vbus_drv>; regulator-name = "vcc_host"; @@ -199,7 +199,7 @@ phy-supply = <&vcc_lan>; phy-mode = "rmii"; clock_in_out = "output"; - snps,reset-gpio = <&gpio3 12 0>; + snps,reset-gpio = <&gpio3 RK_PB4 GPIO_ACTIVE_HIGH>; snps,reset-active-low; snps,reset-delays-us = <0 10000 1000000>; pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-evb.dts b/arch/arm64/boot/dts/rockchip/rk3399-evb.dts index 8e82497..f00e0d5 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-evb.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-evb.dts @@ -88,7 +88,7 @@ vcc5v0_host: vcc5v0-host-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio4 25 GPIO_ACTIVE_HIGH>; + gpio = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&vcc5v0_host_en>; regulator-name = "vcc5v0_host"; @@ -123,7 +123,7 @@ phy-mode = "rgmii"; pinctrl-names = "default"; pinctrl-0 = <&rgmii_pins>; - snps,reset-gpio = <&gpio3 15 GPIO_ACTIVE_LOW>; + snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; snps,reset-active-low; snps,reset-delays-us = <0 10000 50000>; tx_delay = <0x28>; @@ -156,7 +156,7 @@ }; &pcie0 { - ep-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>; + ep-gpios = <&gpio3 RK_PB5 GPIO_ACTIVE_HIGH>; num-lanes = <4>; pinctrl-names = "default"; pinctrl-0 = <&pcie_clkreqn>;

[2/2] ARM64: dts: rockchip: use pin constants to describe gpios

Commit Message

Patch