ARM: dts: imx: Fix "ERROR: code indent should use tabs where possible"

Message ID	1477476061-30442-1-git-send-email-jagan@openedev.com (mailing list archive)
State	New, archived
Headers	show Return-Path: <linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org> From: Jagan Teki <jagan@openedev.com> To: Shawn Guo <shawnguo@kernel.org> Subject: [PATCH] ARM: dts: imx: Fix "ERROR: code indent should use tabs where possible" Date: Wed, 26 Oct 2016 15:31:01 +0530 Message-Id: <1477476061-30442-1-git-send-email-jagan@openedev.com> Precedence: list Cc: devicetree@vger.kernel.org, Jagan Teki <jagan@openedev.com>, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "linux-arm-kernel" <linux-arm-kernel-bounces@lists.infradead.org> Errors-To: linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org

diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi index 440ee9a..8e1543f 100644 --- a/arch/arm/boot/dts/imx23.dtsi +++ b/arch/arm/boot/dts/imx23.dtsi @@ -464,7 +464,7 @@ reg = <0x80038000 0x2000>; status = "disabled"; }; - }; + }; apbx@80040000 { compatible = "simple-bus"; diff --git a/arch/arm/boot/dts/imx50.dtsi b/arch/arm/boot/dts/imx50.dtsi index 8fe8bee..92a03bc 100644 --- a/arch/arm/boot/dts/imx50.dtsi +++ b/arch/arm/boot/dts/imx50.dtsi @@ -103,8 +103,8 @@ reg = <0x50004000 0x4000>; interrupts = <1>; clocks = <&clks IMX5_CLK_ESDHC1_IPG_GATE>, - <&clks IMX5_CLK_DUMMY>, - <&clks IMX5_CLK_ESDHC1_PER_GATE>; + <&clks IMX5_CLK_DUMMY>, + <&clks IMX5_CLK_ESDHC1_PER_GATE>; clock-names = "ipg", "ahb", "per"; bus-width = <4>; status = "disabled"; @@ -115,8 +115,8 @@ reg = <0x50008000 0x4000>; interrupts = <2>; clocks = <&clks IMX5_CLK_ESDHC2_IPG_GATE>, - <&clks IMX5_CLK_DUMMY>, - <&clks IMX5_CLK_ESDHC2_PER_GATE>; + <&clks IMX5_CLK_DUMMY>, + <&clks IMX5_CLK_ESDHC2_PER_GATE>; clock-names = "ipg", "ahb", "per"; bus-width = <4>; status = "disabled"; @@ -127,7 +127,7 @@ reg = <0x5000c000 0x4000>; interrupts = <33>; clocks = <&clks IMX5_CLK_UART3_IPG_GATE>, - <&clks IMX5_CLK_UART3_PER_GATE>; + <&clks IMX5_CLK_UART3_PER_GATE>; clock-names = "ipg", "per"; status = "disabled"; }; @@ -139,7 +139,7 @@ reg = <0x50010000 0x4000>; interrupts = <36>; clocks = <&clks IMX5_CLK_ECSPI1_IPG_GATE>, - <&clks IMX5_CLK_ECSPI1_PER_GATE>; + <&clks IMX5_CLK_ECSPI1_PER_GATE>; clock-names = "ipg", "per"; status = "disabled"; }; @@ -164,8 +164,8 @@ reg = <0x50020000 0x4000>; interrupts = <3>; clocks = <&clks IMX5_CLK_ESDHC3_IPG_GATE>, - <&clks IMX5_CLK_DUMMY>, - <&clks IMX5_CLK_ESDHC3_PER_GATE>; + <&clks IMX5_CLK_DUMMY>, + <&clks IMX5_CLK_ESDHC3_PER_GATE>; clock-names = "ipg", "ahb", "per"; bus-width = <4>; status = "disabled"; @@ -176,8 +176,8 @@ reg = <0x50024000 0x4000>; interrupts = <4>; clocks = <&clks IMX5_CLK_ESDHC4_IPG_GATE>, - <&clks IMX5_CLK_DUMMY>, - <&clks IMX5_CLK_ESDHC4_PER_GATE>; + <&clks IMX5_CLK_DUMMY>, + <&clks IMX5_CLK_ESDHC4_PER_GATE>; clock-names = "ipg", "ahb", "per"; bus-width = <4>; status = "disabled"; @@ -279,7 +279,7 @@ reg = <0x53fa0000 0x4000>; interrupts = <39>; clocks = <&clks IMX5_CLK_GPT_IPG_GATE>, - <&clks IMX5_CLK_GPT_HF_GATE>; + <&clks IMX5_CLK_GPT_HF_GATE>; clock-names = "ipg", "per"; }; @@ -298,7 +298,7 @@ compatible = "fsl,imx50-pwm", "fsl,imx27-pwm"; reg = <0x53fb4000 0x4000>; clocks = <&clks IMX5_CLK_PWM1_IPG_GATE>, - <&clks IMX5_CLK_PWM1_HF_GATE>; + <&clks IMX5_CLK_PWM1_HF_GATE>; clock-names = "ipg", "per"; interrupts = <61>; }; @@ -308,7 +308,7 @@ compatible = "fsl,imx50-pwm", "fsl,imx27-pwm"; reg = <0x53fb8000 0x4000>; clocks = <&clks IMX5_CLK_PWM2_IPG_GATE>, - <&clks IMX5_CLK_PWM2_HF_GATE>; + <&clks IMX5_CLK_PWM2_HF_GATE>; clock-names = "ipg", "per"; interrupts = <94>; }; @@ -318,7 +318,7 @@ reg = <0x53fbc000 0x4000>; interrupts = <31>; clocks = <&clks IMX5_CLK_UART1_IPG_GATE>, - <&clks IMX5_CLK_UART1_PER_GATE>; + <&clks IMX5_CLK_UART1_PER_GATE>; clock-names = "ipg", "per"; status = "disabled"; }; @@ -328,7 +328,7 @@ reg = <0x53fc0000 0x4000>; interrupts = <32>; clocks = <&clks IMX5_CLK_UART2_IPG_GATE>, - <&clks IMX5_CLK_UART2_PER_GATE>; + <&clks IMX5_CLK_UART2_PER_GATE>; clock-names = "ipg", "per"; status = "disabled"; }; @@ -383,7 +383,7 @@ reg = <0x53ff0000 0x4000>; interrupts = <13>; clocks = <&clks IMX5_CLK_UART4_IPG_GATE>, - <&clks IMX5_CLK_UART4_PER_GATE>; + <&clks IMX5_CLK_UART4_PER_GATE>; clock-names = "ipg", "per"; status = "disabled"; }; @@ -401,7 +401,7 @@ reg = <0x63f90000 0x4000>; interrupts = <86>; clocks = <&clks IMX5_CLK_UART5_IPG_GATE>, - <&clks IMX5_CLK_UART5_PER_GATE>; + <&clks IMX5_CLK_UART5_PER_GATE>; clock-names = "ipg", "per"; status = "disabled"; }; @@ -420,7 +420,7 @@ reg = <0x63fac000 0x4000>; interrupts = <37>; clocks = <&clks IMX5_CLK_ECSPI2_IPG_GATE>, - <&clks IMX5_CLK_ECSPI2_PER_GATE>; + <&clks IMX5_CLK_ECSPI2_PER_GATE>; clock-names = "ipg", "per"; status = "disabled"; }; @@ -430,7 +430,7 @@ reg = <0x63fb0000 0x4000>; interrupts = <6>; clocks = <&clks IMX5_CLK_SDMA_GATE>, - <&clks IMX5_CLK_SDMA_GATE>; + <&clks IMX5_CLK_SDMA_GATE>; clock-names = "ipg", "ahb"; fsl,sdma-ram-script-name = "imx/sdma/sdma-imx50.bin"; }; @@ -442,7 +442,7 @@ reg = <0x63fc0000 0x4000>; interrupts = <38>; clocks = <&clks IMX5_CLK_CSPI_IPG_GATE>, - <&clks IMX5_CLK_CSPI_IPG_GATE>; + <&clks IMX5_CLK_CSPI_IPG_GATE>; clock-names = "ipg", "per"; status = "disabled"; }; @@ -492,8 +492,8 @@ reg = <0x63fec000 0x4000>; interrupts = <87>; clocks = <&clks IMX5_CLK_FEC_GATE>, - <&clks IMX5_CLK_FEC_GATE>, - <&clks IMX5_CLK_FEC_GATE>; + <&clks IMX5_CLK_FEC_GATE>, + <&clks IMX5_CLK_FEC_GATE>; clock-names = "ipg", "ahb", "ptp"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi index f46fe9b..d8efdab 100644 --- a/arch/arm/boot/dts/imx51.dtsi +++ b/arch/arm/boot/dts/imx51.dtsi @@ -130,8 +130,8 @@ reg = <0x40000000 0x20000000>; interrupts = <11 10>; clocks = <&clks IMX5_CLK_IPU_GATE>, - <&clks IMX5_CLK_IPU_DI0_GATE>, - <&clks IMX5_CLK_IPU_DI1_GATE>; + <&clks IMX5_CLK_IPU_DI0_GATE>, + <&clks IMX5_CLK_IPU_DI1_GATE>; clock-names = "bus", "di0", "di1"; resets = <&src 2>; @@ -169,8 +169,8 @@ reg = <0x70004000 0x4000>; interrupts = <1>; clocks = <&clks IMX5_CLK_ESDHC1_IPG_GATE>, - <&clks IMX5_CLK_DUMMY>, - <&clks IMX5_CLK_ESDHC1_PER_GATE>; + <&clks IMX5_CLK_DUMMY>, + <&clks IMX5_CLK_ESDHC1_PER_GATE>; clock-names = "ipg", "ahb", "per"; status = "disabled"; }; @@ -180,8 +180,8 @@ reg = <0x70008000 0x4000>; interrupts = <2>; clocks = <&clks IMX5_CLK_ESDHC2_IPG_GATE>, - <&clks IMX5_CLK_DUMMY>, - <&clks IMX5_CLK_ESDHC2_PER_GATE>; + <&clks IMX5_CLK_DUMMY>, + <&clks IMX5_CLK_ESDHC2_PER_GATE>; clock-names = "ipg", "ahb", "per"; bus-width = <4>; status = "disabled"; @@ -192,7 +192,7 @@ reg = <0x7000c000 0x4000>; interrupts = <33>; clocks = <&clks IMX5_CLK_UART3_IPG_GATE>, - <&clks IMX5_CLK_UART3_PER_GATE>; + <&clks IMX5_CLK_UART3_PER_GATE>; clock-names = "ipg", "per"; status = "disabled"; }; @@ -204,7 +204,7 @@ reg = <0x70010000 0x4000>; interrupts = <36>; clocks = <&clks IMX5_CLK_ECSPI1_IPG_GATE>, - <&clks IMX5_CLK_ECSPI1_PER_GATE>; + <&clks IMX5_CLK_ECSPI1_PER_GATE>; clock-names = "ipg", "per"; status = "disabled"; }; @@ -229,8 +229,8 @@ reg = <0x70020000 0x4000>; interrupts = <3>; clocks = <&clks IMX5_CLK_ESDHC3_IPG_GATE>, - <&clks IMX5_CLK_DUMMY>, - <&clks IMX5_CLK_ESDHC3_PER_GATE>; + <&clks IMX5_CLK_DUMMY>, + <&clks IMX5_CLK_ESDHC3_PER_GATE>; clock-names = "ipg", "ahb", "per"; bus-width = <4>; status = "disabled"; @@ -241,8 +241,8 @@ reg = <0x70024000 0x4000>; interrupts = <4>; clocks = <&clks IMX5_CLK_ESDHC4_IPG_GATE>, - <&clks IMX5_CLK_DUMMY>, - <&clks IMX5_CLK_ESDHC4_PER_GATE>; + <&clks IMX5_CLK_DUMMY>, + <&clks IMX5_CLK_ESDHC4_PER_GATE>; clock-names = "ipg", "ahb", "per"; bus-width = <4>; status = "disabled"; @@ -364,7 +364,7 @@ reg = <0x73fa0000 0x4000>; interrupts = <39>; clocks = <&clks IMX5_CLK_GPT_IPG_GATE>, - <&clks IMX5_CLK_GPT_HF_GATE>; + <&clks IMX5_CLK_GPT_HF_GATE>; clock-names = "ipg", "per"; }; @@ -378,7 +378,7 @@ compatible = "fsl,imx51-pwm", "fsl,imx27-pwm"; reg = <0x73fb4000 0x4000>; clocks = <&clks IMX5_CLK_PWM1_IPG_GATE>, - <&clks IMX5_CLK_PWM1_HF_GATE>; + <&clks IMX5_CLK_PWM1_HF_GATE>; clock-names = "ipg", "per"; interrupts = <61>; }; @@ -388,7 +388,7 @@ compatible = "fsl,imx51-pwm", "fsl,imx27-pwm"; reg = <0x73fb8000 0x4000>; clocks = <&clks IMX5_CLK_PWM2_IPG_GATE>, - <&clks IMX5_CLK_PWM2_HF_GATE>; + <&clks IMX5_CLK_PWM2_HF_GATE>; clock-names = "ipg", "per"; interrupts = <94>; }; @@ -398,7 +398,7 @@ reg = <0x73fbc000 0x4000>; interrupts = <31>; clocks = <&clks IMX5_CLK_UART1_IPG_GATE>, - <&clks IMX5_CLK_UART1_PER_GATE>; + <&clks IMX5_CLK_UART1_PER_GATE>; clock-names = "ipg", "per"; status = "disabled"; }; @@ -408,7 +408,7 @@ reg = <0x73fc0000 0x4000>; interrupts = <32>; clocks = <&clks IMX5_CLK_UART2_IPG_GATE>, - <&clks IMX5_CLK_UART2_PER_GATE>; + <&clks IMX5_CLK_UART2_PER_GATE>; clock-names = "ipg", "per"; status = "disabled"; }; @@ -456,7 +456,7 @@ reg = <0x83fac000 0x4000>; interrupts = <37>; clocks = <&clks IMX5_CLK_ECSPI2_IPG_GATE>, - <&clks IMX5_CLK_ECSPI2_PER_GATE>; + <&clks IMX5_CLK_ECSPI2_PER_GATE>; clock-names = "ipg", "per"; status = "disabled"; }; @@ -466,7 +466,7 @@ reg = <0x83fb0000 0x4000>; interrupts = <6>; clocks = <&clks IMX5_CLK_SDMA_GATE>, - <&clks IMX5_CLK_SDMA_GATE>; + <&clks IMX5_CLK_SDMA_GATE>; clock-names = "ipg", "ahb"; #dma-cells = <3>; fsl,sdma-ram-script-name = "imx/sdma/sdma-imx51.bin"; @@ -479,7 +479,7 @@ reg = <0x83fc0000 0x4000>; interrupts = <38>; clocks = <&clks IMX5_CLK_CSPI_IPG_GATE>, - <&clks IMX5_CLK_CSPI_IPG_GATE>; + <&clks IMX5_CLK_CSPI_IPG_GATE>; clock-names = "ipg", "per"; status = "disabled"; }; @@ -582,8 +582,8 @@ reg = <0x83fec000 0x4000>; interrupts = <87>; clocks = <&clks IMX5_CLK_FEC_GATE>, - <&clks IMX5_CLK_FEC_GATE>, - <&clks IMX5_CLK_FEC_GATE>; + <&clks IMX5_CLK_FEC_GATE>, + <&clks IMX5_CLK_FEC_GATE>; clock-names = "ipg", "ahb", "ptp"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi index 0777b41..88f9e09e 100644 --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi @@ -131,8 +131,8 @@ reg = <0x18000000 0x08000000>; interrupts = <11 10>; clocks = <&clks IMX5_CLK_IPU_GATE>, - <&clks IMX5_CLK_IPU_DI0_GATE>, - <&clks IMX5_CLK_IPU_DI1_GATE>; + <&clks IMX5_CLK_IPU_DI0_GATE>, + <&clks IMX5_CLK_IPU_DI1_GATE>; clock-names = "bus", "di0", "di1"; resets = <&src 2>; @@ -199,8 +199,8 @@ reg = <0x50004000 0x4000>; interrupts = <1>; clocks = <&clks IMX5_CLK_ESDHC1_IPG_GATE>, - <&clks IMX5_CLK_DUMMY>, - <&clks IMX5_CLK_ESDHC1_PER_GATE>; + <&clks IMX5_CLK_DUMMY>, + <&clks IMX5_CLK_ESDHC1_PER_GATE>; clock-names = "ipg", "ahb", "per"; bus-width = <4>; status = "disabled"; @@ -211,8 +211,8 @@ reg = <0x50008000 0x4000>; interrupts = <2>; clocks = <&clks IMX5_CLK_ESDHC2_IPG_GATE>, - <&clks IMX5_CLK_DUMMY>, - <&clks IMX5_CLK_ESDHC2_PER_GATE>; + <&clks IMX5_CLK_DUMMY>, + <&clks IMX5_CLK_ESDHC2_PER_GATE>; clock-names = "ipg", "ahb", "per"; bus-width = <4>; status = "disabled"; @@ -223,7 +223,7 @@ reg = <0x5000c000 0x4000>; interrupts = <33>; clocks = <&clks IMX5_CLK_UART3_IPG_GATE>, - <&clks IMX5_CLK_UART3_PER_GATE>; + <&clks IMX5_CLK_UART3_PER_GATE>; clock-names = "ipg", "per"; dmas = <&sdma 42 4 0>, <&sdma 43 4 0>; dma-names = "rx", "tx"; @@ -237,7 +237,7 @@ reg = <0x50010000 0x4000>; interrupts = <36>; clocks = <&clks IMX5_CLK_ECSPI1_IPG_GATE>, - <&clks IMX5_CLK_ECSPI1_PER_GATE>; + <&clks IMX5_CLK_ECSPI1_PER_GATE>; clock-names = "ipg", "per"; status = "disabled"; }; @@ -264,8 +264,8 @@ reg = <0x50020000 0x4000>; interrupts = <3>; clocks = <&clks IMX5_CLK_ESDHC3_IPG_GATE>, - <&clks IMX5_CLK_DUMMY>, - <&clks IMX5_CLK_ESDHC3_PER_GATE>; + <&clks IMX5_CLK_DUMMY>, + <&clks IMX5_CLK_ESDHC3_PER_GATE>; clock-names = "ipg", "ahb", "per"; bus-width = <4>; status = "disabled"; @@ -276,8 +276,8 @@ reg = <0x50024000 0x4000>; interrupts = <4>; clocks = <&clks IMX5_CLK_ESDHC4_IPG_GATE>, - <&clks IMX5_CLK_DUMMY>, - <&clks IMX5_CLK_ESDHC4_PER_GATE>; + <&clks IMX5_CLK_DUMMY>, + <&clks IMX5_CLK_ESDHC4_PER_GATE>; clock-names = "ipg", "ahb", "per"; bus-width = <4>; status = "disabled"; @@ -419,7 +419,7 @@ reg = <0x53fa0000 0x4000>; interrupts = <39>; clocks = <&clks IMX5_CLK_GPT_IPG_GATE>, - <&clks IMX5_CLK_GPT_HF_GATE>; + <&clks IMX5_CLK_GPT_HF_GATE>; clock-names = "ipg", "per"; }; @@ -440,11 +440,11 @@ reg = <0x53fa8008 0x4>; gpr = <&gpr>; clocks = <&clks IMX5_CLK_LDB_DI0_SEL>, - <&clks IMX5_CLK_LDB_DI1_SEL>, - <&clks IMX5_CLK_IPU_DI0_SEL>, - <&clks IMX5_CLK_IPU_DI1_SEL>, - <&clks IMX5_CLK_LDB_DI0_GATE>, - <&clks IMX5_CLK_LDB_DI1_GATE>; + <&clks IMX5_CLK_LDB_DI1_SEL>, + <&clks IMX5_CLK_IPU_DI0_SEL>, + <&clks IMX5_CLK_IPU_DI1_SEL>, + <&clks IMX5_CLK_LDB_DI0_GATE>, + <&clks IMX5_CLK_LDB_DI1_GATE>; clock-names = "di0_pll", "di1_pll", "di0_sel", "di1_sel", "di0", "di1"; @@ -486,7 +486,7 @@ compatible = "fsl,imx53-pwm", "fsl,imx27-pwm"; reg = <0x53fb4000 0x4000>; clocks = <&clks IMX5_CLK_PWM1_IPG_GATE>, - <&clks IMX5_CLK_PWM1_HF_GATE>; + <&clks IMX5_CLK_PWM1_HF_GATE>; clock-names = "ipg", "per"; interrupts = <61>; }; @@ -496,7 +496,7 @@ compatible = "fsl,imx53-pwm", "fsl,imx27-pwm"; reg = <0x53fb8000 0x4000>; clocks = <&clks IMX5_CLK_PWM2_IPG_GATE>, - <&clks IMX5_CLK_PWM2_HF_GATE>; + <&clks IMX5_CLK_PWM2_HF_GATE>; clock-names = "ipg", "per"; interrupts = <94>; }; @@ -506,7 +506,7 @@ reg = <0x53fbc000 0x4000>; interrupts = <31>; clocks = <&clks IMX5_CLK_UART1_IPG_GATE>, - <&clks IMX5_CLK_UART1_PER_GATE>; + <&clks IMX5_CLK_UART1_PER_GATE>; clock-names = "ipg", "per"; dmas = <&sdma 18 4 0>, <&sdma 19 4 0>; dma-names = "rx", "tx"; @@ -518,7 +518,7 @@ reg = <0x53fc0000 0x4000>; interrupts = <32>; clocks = <&clks IMX5_CLK_UART2_IPG_GATE>, - <&clks IMX5_CLK_UART2_PER_GATE>; + <&clks IMX5_CLK_UART2_PER_GATE>; clock-names = "ipg", "per"; dmas = <&sdma 12 4 0>, <&sdma 13 4 0>; dma-names = "rx", "tx"; @@ -530,7 +530,7 @@ reg = <0x53fc8000 0x4000>; interrupts = <82>; clocks = <&clks IMX5_CLK_CAN1_IPG_GATE>, - <&clks IMX5_CLK_CAN1_SERIAL_GATE>; + <&clks IMX5_CLK_CAN1_SERIAL_GATE>; clock-names = "ipg", "per"; status = "disabled"; }; @@ -540,7 +540,7 @@ reg = <0x53fcc000 0x4000>; interrupts = <83>; clocks = <&clks IMX5_CLK_CAN2_IPG_GATE>, - <&clks IMX5_CLK_CAN2_SERIAL_GATE>; + <&clks IMX5_CLK_CAN2_SERIAL_GATE>; clock-names = "ipg", "per"; status = "disabled"; }; @@ -603,7 +603,7 @@ reg = <0x53ff0000 0x4000>; interrupts = <13>; clocks = <&clks IMX5_CLK_UART4_IPG_GATE>, - <&clks IMX5_CLK_UART4_PER_GATE>; + <&clks IMX5_CLK_UART4_PER_GATE>; clock-names = "ipg", "per"; dmas = <&sdma 2 4 0>, <&sdma 3 4 0>; dma-names = "rx", "tx"; @@ -635,7 +635,7 @@ reg = <0x63f90000 0x4000>; interrupts = <86>; clocks = <&clks IMX5_CLK_UART5_IPG_GATE>, - <&clks IMX5_CLK_UART5_PER_GATE>; + <&clks IMX5_CLK_UART5_PER_GATE>; clock-names = "ipg", "per"; dmas = <&sdma 16 4 0>, <&sdma 17 4 0>; dma-names = "rx", "tx"; @@ -656,7 +656,7 @@ reg = <0x63fac000 0x4000>; interrupts = <37>; clocks = <&clks IMX5_CLK_ECSPI2_IPG_GATE>, - <&clks IMX5_CLK_ECSPI2_PER_GATE>; + <&clks IMX5_CLK_ECSPI2_PER_GATE>; clock-names = "ipg", "per"; status = "disabled"; }; @@ -666,7 +666,7 @@ reg = <0x63fb0000 0x4000>; interrupts = <6>; clocks = <&clks IMX5_CLK_SDMA_GATE>, - <&clks IMX5_CLK_SDMA_GATE>; + <&clks IMX5_CLK_SDMA_GATE>; clock-names = "ipg", "ahb"; #dma-cells = <3>; fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin"; @@ -679,7 +679,7 @@ reg = <0x63fc0000 0x4000>; interrupts = <38>; clocks = <&clks IMX5_CLK_CSPI_IPG_GATE>, - <&clks IMX5_CLK_CSPI_IPG_GATE>; + <&clks IMX5_CLK_CSPI_IPG_GATE>; clock-names = "ipg", "per"; status = "disabled"; }; @@ -755,8 +755,8 @@ reg = <0x63fec000 0x4000>; interrupts = <87>; clocks = <&clks IMX5_CLK_FEC_GATE>, - <&clks IMX5_CLK_FEC_GATE>, - <&clks IMX5_CLK_FEC_GATE>; + <&clks IMX5_CLK_FEC_GATE>, + <&clks IMX5_CLK_FEC_GATE>; clock-names = "ipg", "ahb", "ptp"; status = "disabled"; }; @@ -766,7 +766,7 @@ reg = <0x63ff0000 0x1000>; interrupts = <92>; clocks = <&clks IMX5_CLK_TVE_GATE>, - <&clks IMX5_CLK_IPU_DI1_SEL>; + <&clks IMX5_CLK_IPU_DI1_SEL>; clock-names = "tve", "di_sel"; status = "disabled"; @@ -782,7 +782,7 @@ reg = <0x63ff4000 0x1000>; interrupts = <9>; clocks = <&clks IMX5_CLK_VPU_REFERENCE_GATE>, - <&clks IMX5_CLK_VPU_GATE>; + <&clks IMX5_CLK_VPU_GATE>; clock-names = "per", "ahb"; resets = <&src 1>; iram = <&ocram>; @@ -793,7 +793,7 @@ reg = <0x63ff8000 0x4000>; interrupts = <19 20>; clocks = <&clks IMX5_CLK_SAHARA_IPG_GATE>, - <&clks IMX5_CLK_SAHARA_IPG_GATE>; + <&clks IMX5_CLK_SAHARA_IPG_GATE>; clock-names = "ipg", "ahb"; }; }; diff --git a/arch/arm/boot/dts/imx6dl-riotboard.dts b/arch/arm/boot/dts/imx6dl-riotboard.dts index 75d7343..2cb7282 100644 --- a/arch/arm/boot/dts/imx6dl-riotboard.dts +++ b/arch/arm/boot/dts/imx6dl-riotboard.dts @@ -390,7 +390,7 @@ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 /* AR8035 pin strapping: MODE#3: pull up */ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x130b0 /* AR8035 pin strapping: MODE#0: pull down */ MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 /* GPIO16 -> AR8035 25MHz */ - MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x130b0 /* RGMII_nRST */ + MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x130b0 /* RGMII_nRST */ MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x180b0 /* AR8035 interrupt */ MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1 >; diff --git a/arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts b/arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts index 063fe75..aac42ac 100644 --- a/arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts +++ b/arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts @@ -105,7 +105,7 @@ pixelclk-active = <1>; }; }; - }; + }; }; &can1 { diff --git a/arch/arm/boot/dts/imx6dl-tx6u-801x.dts b/arch/arm/boot/dts/imx6dl-tx6u-801x.dts index b7a7284..d1f1298 100644 --- a/arch/arm/boot/dts/imx6dl-tx6u-801x.dts +++ b/arch/arm/boot/dts/imx6dl-tx6u-801x.dts @@ -199,7 +199,7 @@ pixelclk-active = <0>; }; }; - }; + }; }; &ipu1_di0_disp0 { diff --git a/arch/arm/boot/dts/imx6q-phytec-pbab01.dts b/arch/arm/boot/dts/imx6q-phytec-pbab01.dts index c139ac0..1f47713 100644 --- a/arch/arm/boot/dts/imx6q-phytec-pbab01.dts +++ b/arch/arm/boot/dts/imx6q-phytec-pbab01.dts @@ -23,5 +23,5 @@ }; &sata { - status = "okay"; + status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6q-tx6q-1010-comtft.dts b/arch/arm/boot/dts/imx6q-tx6q-1010-comtft.dts index 65e95ae..71746ed 100644 --- a/arch/arm/boot/dts/imx6q-tx6q-1010-comtft.dts +++ b/arch/arm/boot/dts/imx6q-tx6q-1010-comtft.dts @@ -105,7 +105,7 @@ pixelclk-active = <1>; }; }; - }; + }; }; &can1 { diff --git a/arch/arm/boot/dts/imx6q-tx6q-1010.dts b/arch/arm/boot/dts/imx6q-tx6q-1010.dts index 20cd0e7..f9cd21a 100644 --- a/arch/arm/boot/dts/imx6q-tx6q-1010.dts +++ b/arch/arm/boot/dts/imx6q-tx6q-1010.dts @@ -199,7 +199,7 @@ pixelclk-active = <0>; }; }; - }; + }; }; &ipu1_di0_disp0 { diff --git a/arch/arm/boot/dts/imx6q-tx6q-1020-comtft.dts b/arch/arm/boot/dts/imx6q-tx6q-1020-comtft.dts index 9ed243b..959ff3fb 100644 --- a/arch/arm/boot/dts/imx6q-tx6q-1020-comtft.dts +++ b/arch/arm/boot/dts/imx6q-tx6q-1020-comtft.dts @@ -105,7 +105,7 @@ pixelclk-active = <1>; }; }; - }; + }; }; &can1 { diff --git a/arch/arm/boot/dts/imx6q-tx6q-1020.dts b/arch/arm/boot/dts/imx6q-tx6q-1020.dts index 347b531..b49133d 100644 --- a/arch/arm/boot/dts/imx6q-tx6q-1020.dts +++ b/arch/arm/boot/dts/imx6q-tx6q-1020.dts @@ -199,7 +199,7 @@ pixelclk-active = <0>; }; }; - }; + }; }; &ds1339 { diff --git a/arch/arm/boot/dts/imx6sx-sdb.dtsi b/arch/arm/boot/dts/imx6sx-sdb.dtsi index 9d70cfd..7327bcd 100644 --- a/arch/arm/boot/dts/imx6sx-sdb.dtsi +++ b/arch/arm/boot/dts/imx6sx-sdb.dtsi @@ -192,10 +192,10 @@ }; &i2c4 { - clock-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c4>; - status = "okay"; + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c4>; + status = "okay"; codec: wm8962@1a { compatible = "wlf,wm8962"; diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi index 9526c38..bd9fe67 100644 --- a/arch/arm/boot/dts/imx6sx.dtsi +++ b/arch/arm/boot/dts/imx6sx.dtsi @@ -858,7 +858,7 @@ fsl,num-tx-queues=<3>; fsl,num-rx-queues=<3>; status = "disabled"; - }; + }; mlb: mlb@0218c000 { reg = <0x0218c000 0x4000>; @@ -1181,7 +1181,7 @@ fsl,adck-max-frequency = <30000000>, <40000000>, <20000000>; status = "disabled"; - }; + }; adc2: adc@02284000 { compatible = "fsl,imx6sx-adc", "fsl,vf610-adc"; @@ -1192,7 +1192,7 @@ fsl,adck-max-frequency = <30000000>, <40000000>, <20000000>; status = "disabled"; - }; + }; wdog3: wdog@02288000 { compatible = "fsl,imx6sx-wdt", "fsl,imx21-wdt";

ARM: dts: imx: Fix "ERROR: code indent should use tabs where possible"

Commit Message

Patch