| Message ID | 1480520625-13269-3-git-send-email-narmstrong@baylibre.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi Neil, Thank you for the patch. On Wednesday 30 Nov 2016 16:43:43 Neil Armstrong wrote: > Add Video Processing Unit and CVBS Output nodes, and enable CVBS on selected > boards. > > Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> > --- > arch/arm64/boot/dts/amlogic/meson-gx.dtsi | 19 ++++++++++++++++ > .../arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts | 15 +++++++++++++++ > arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi | 15 +++++++++++++++ > arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 4 ++++ > arch/arm64/boot/dts/amlogic/meson-gxl-nexbox-a95x.dts | 15 +++++++++++++++ > arch/arm64/boot/dts/amlogic/meson-gxl.dtsi | 4 ++++ > arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts | 15 +++++++++++++++ > arch/arm64/boot/dts/amlogic/meson-gxm.dtsi | 4 ++++ > 8 files changed, 91 insertions(+) > > diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi > b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi index fc033c0..a27f881 100644 > --- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi > +++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi > @@ -356,5 +356,24 @@ > status = "disabled"; > }; > }; > + > + vpu: vpu@d0100000 { > + compatible = "amlogic,meson-gx-vpu"; > + reg = <0x0 0xd0100000 0x0 0x100000>, > + <0x0 0xc883c000 0x0 0x1000>, > + <0x0 0xc8838000 0x0 0x1000>; > + reg-names = "vpu", "hhi", "dmc"; > + interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>; > + #address-cells = <1>; > + #size-cells = <0>; > + > + /* CVBS VDAC output port */ > + port@0 { > + reg = <0>; > + > + cvbs_vdac_out: endpoint { > + }; Endpoints require a remote-endpoint property. You should move the endpoint to board DT files. > + }; > + }; > }; > }; > diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts > b/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts index > 9696820..390f7db 100644 > --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts > +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts > @@ -142,6 +142,17 @@ > clocks = <&wifi32k>; > clock-names = "ext_clock"; > }; > + > + cvbs-connector { > + compatible = "composite-video-connector"; > + label = "cvbs"; Unless the board has a label for the connector (either on the board, on the casing or in the user manual) I'd leave this out. Same comment for the other boards. Apart from that, Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > + > + port { > + cvbs_connector_in: endpoint { > + remote-endpoint = <&cvbs_vdac_out>; > + }; > + }; > + }; > }; > > &uart_AO { > @@ -229,3 +240,7 @@ > clocks = <&clkc CLKID_FCLK_DIV4>; > clock-names = "clkin0"; > }; > + > +&cvbs_vdac_out { > + remote-endpoint = <&cvbs_connector_in>; > +}; > diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi > b/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi index 203be28..44bdebf > 100644 > --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi > +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi > @@ -125,6 +125,17 @@ > clocks = <&wifi32k>; > clock-names = "ext_clock"; > }; > + > + cvbs-connector { > + compatible = "composite-video-connector"; > + label = "cvbs"; > + > + port { > + cvbs_connector_in: endpoint { > + remote-endpoint = <&cvbs_vdac_out>; > + }; > + }; > + }; > }; > > /* This UART is brought out to the DB9 connector */ > @@ -234,3 +245,7 @@ > clocks = <&clkc CLKID_FCLK_DIV4>; > clock-names = "clkin0"; > }; > + > +&cvbs_vdac_out { > + remote-endpoint = <&cvbs_connector_in>; > +}; > diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi > b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi index ac5ad3b..5353a20 100644 > --- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi > +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi > @@ -506,3 +506,7 @@ > <&clkc CLKID_FCLK_DIV2>; > clock-names = "core", "clkin0", "clkin1"; > }; > + > +&vpu { > + compatible = "amlogic,meson-gxbb-vpu", "amlogic,meson-gx-vpu"; > +}; > diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-nexbox-a95x.dts > b/arch/arm64/boot/dts/amlogic/meson-gxl-nexbox-a95x.dts index > e99101a..7bd0538 100644 > --- a/arch/arm64/boot/dts/amlogic/meson-gxl-nexbox-a95x.dts > +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-nexbox-a95x.dts > @@ -117,6 +117,17 @@ > clocks = <&wifi32k>; > clock-names = "ext_clock"; > }; > + > + cvbs-connector { > + compatible = "composite-video-connector"; > + label = "cvbs"; > + > + port { > + cvbs_connector_in: endpoint { > + remote-endpoint = <&cvbs_vdac_out>; > + }; > + }; > + }; > }; > > &uart_AO { > @@ -203,3 +214,7 @@ > clocks = <&clkc CLKID_FCLK_DIV4>; > clock-names = "clkin0"; > }; > + > +&cvbs_vdac_out { > + remote-endpoint = <&cvbs_connector_in>; > +}; > diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi > b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi index 9f89b99..5c7a8fa 100644 > --- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi > +++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi > @@ -299,3 +299,7 @@ > <&clkc CLKID_FCLK_DIV2>; > clock-names = "core", "clkin0", "clkin1"; > }; > + > +&vpu { > + compatible = "amlogic,meson-gxl-vpu", "amlogic,meson-gx-vpu"; > +}; > diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts > b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts index > d320727..5b99749 100644 > --- a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts > +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts > @@ -90,6 +90,17 @@ > compatible = "mmc-pwrseq-emmc"; > reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; > }; > + > + cvbs-connector { > + compatible = "composite-video-connector"; > + label = "cvbs"; > + > + port { > + cvbs_connector_in: endpoint { > + remote-endpoint = <&cvbs_vdac_out>; > + }; > + }; > + }; > }; > > /* This UART is brought out to the DB9 connector */ > @@ -167,3 +178,7 @@ > max-speed = <1000>; > }; > }; > + > +&cvbs_vdac_out { > + remote-endpoint = <&cvbs_connector_in>; > +}; > diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi > b/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi index c1974bb..eb2f0c3 100644 > --- a/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi > +++ b/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi > @@ -112,3 +112,7 @@ > }; > }; > }; > + > +&vpu { > + compatible = "amlogic,meson-gxm-vpu", "amlogic,meson-gx-vpu"; > +};
On 11/30/2016 05:02 PM, Laurent Pinchart wrote: > Hi Neil, > > Thank you for the patch. > > On Wednesday 30 Nov 2016 16:43:43 Neil Armstrong wrote: >> Add Video Processing Unit and CVBS Output nodes, and enable CVBS on selected >> boards. >> >> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> >> --- >> arch/arm64/boot/dts/amlogic/meson-gx.dtsi | 19 ++++++++++++++++ >> .../arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts | 15 +++++++++++++++ >> arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi | 15 +++++++++++++++ >> arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 4 ++++ >> arch/arm64/boot/dts/amlogic/meson-gxl-nexbox-a95x.dts | 15 +++++++++++++++ >> arch/arm64/boot/dts/amlogic/meson-gxl.dtsi | 4 ++++ >> arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts | 15 +++++++++++++++ >> arch/arm64/boot/dts/amlogic/meson-gxm.dtsi | 4 ++++ >> 8 files changed, 91 insertions(+) >> >> diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi >> b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi index fc033c0..a27f881 100644 >> --- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi >> +++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi >> @@ -356,5 +356,24 @@ >> status = "disabled"; >> }; >> }; >> + >> + vpu: vpu@d0100000 { >> + compatible = "amlogic,meson-gx-vpu"; >> + reg = <0x0 0xd0100000 0x0 0x100000>, >> + <0x0 0xc883c000 0x0 0x1000>, >> + <0x0 0xc8838000 0x0 0x1000>; >> + reg-names = "vpu", "hhi", "dmc"; >> + interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + >> + /* CVBS VDAC output port */ >> + port@0 { >> + reg = <0>; >> + >> + cvbs_vdac_out: endpoint { >> + }; > > Endpoints require a remote-endpoint property. You should move the endpoint to > board DT files. OK, I was wondering, it looked dirty to me. > >> + }; >> + }; >> }; >> }; >> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts >> b/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts index >> 9696820..390f7db 100644 >> --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts >> +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts >> @@ -142,6 +142,17 @@ >> clocks = <&wifi32k>; >> clock-names = "ext_clock"; >> }; >> + >> + cvbs-connector { >> + compatible = "composite-video-connector"; >> + label = "cvbs"; > > Unless the board has a label for the connector (either on the board, on the > casing or in the user manual) I'd leave this out. Same comment for the other > boards. OK, Thanks, Neil > > Apart from that, > > Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > >> + >> + port { >> + cvbs_connector_in: endpoint { >> + remote-endpoint = <&cvbs_vdac_out>; >> + }; >> + }; >> + }; >> }; >> >> &uart_AO { >> @@ -229,3 +240,7 @@ >> clocks = <&clkc CLKID_FCLK_DIV4>; >> clock-names = "clkin0"; >> }; >> + >> +&cvbs_vdac_out { >> + remote-endpoint = <&cvbs_connector_in>; >> +}; >> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi >> b/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi index 203be28..44bdebf >> 100644 >> --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi >> +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi >> @@ -125,6 +125,17 @@ >> clocks = <&wifi32k>; >> clock-names = "ext_clock"; >> }; >> + >> + cvbs-connector { >> + compatible = "composite-video-connector"; >> + label = "cvbs"; >> + >> + port { >> + cvbs_connector_in: endpoint { >> + remote-endpoint = <&cvbs_vdac_out>; >> + }; >> + }; >> + }; >> }; >> >> /* This UART is brought out to the DB9 connector */ >> @@ -234,3 +245,7 @@ >> clocks = <&clkc CLKID_FCLK_DIV4>; >> clock-names = "clkin0"; >> }; >> + >> +&cvbs_vdac_out { >> + remote-endpoint = <&cvbs_connector_in>; >> +}; >> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi >> b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi index ac5ad3b..5353a20 100644 >> --- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi >> +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi >> @@ -506,3 +506,7 @@ >> <&clkc CLKID_FCLK_DIV2>; >> clock-names = "core", "clkin0", "clkin1"; >> }; >> + >> +&vpu { >> + compatible = "amlogic,meson-gxbb-vpu", "amlogic,meson-gx-vpu"; >> +}; >> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-nexbox-a95x.dts >> b/arch/arm64/boot/dts/amlogic/meson-gxl-nexbox-a95x.dts index >> e99101a..7bd0538 100644 >> --- a/arch/arm64/boot/dts/amlogic/meson-gxl-nexbox-a95x.dts >> +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-nexbox-a95x.dts >> @@ -117,6 +117,17 @@ >> clocks = <&wifi32k>; >> clock-names = "ext_clock"; >> }; >> + >> + cvbs-connector { >> + compatible = "composite-video-connector"; >> + label = "cvbs"; >> + >> + port { >> + cvbs_connector_in: endpoint { >> + remote-endpoint = <&cvbs_vdac_out>; >> + }; >> + }; >> + }; >> }; >> >> &uart_AO { >> @@ -203,3 +214,7 @@ >> clocks = <&clkc CLKID_FCLK_DIV4>; >> clock-names = "clkin0"; >> }; >> + >> +&cvbs_vdac_out { >> + remote-endpoint = <&cvbs_connector_in>; >> +}; >> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi >> b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi index 9f89b99..5c7a8fa 100644 >> --- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi >> +++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi >> @@ -299,3 +299,7 @@ >> <&clkc CLKID_FCLK_DIV2>; >> clock-names = "core", "clkin0", "clkin1"; >> }; >> + >> +&vpu { >> + compatible = "amlogic,meson-gxl-vpu", "amlogic,meson-gx-vpu"; >> +}; >> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts >> b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts index >> d320727..5b99749 100644 >> --- a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts >> +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts >> @@ -90,6 +90,17 @@ >> compatible = "mmc-pwrseq-emmc"; >> reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; >> }; >> + >> + cvbs-connector { >> + compatible = "composite-video-connector"; >> + label = "cvbs"; >> + >> + port { >> + cvbs_connector_in: endpoint { >> + remote-endpoint = <&cvbs_vdac_out>; >> + }; >> + }; >> + }; >> }; >> >> /* This UART is brought out to the DB9 connector */ >> @@ -167,3 +178,7 @@ >> max-speed = <1000>; >> }; >> }; >> + >> +&cvbs_vdac_out { >> + remote-endpoint = <&cvbs_connector_in>; >> +}; >> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi >> b/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi index c1974bb..eb2f0c3 100644 >> --- a/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi >> +++ b/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi >> @@ -112,3 +112,7 @@ >> }; >> }; >> }; >> + >> +&vpu { >> + compatible = "amlogic,meson-gxm-vpu", "amlogic,meson-gx-vpu"; >> +}; >
diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi index fc033c0..a27f881 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi @@ -356,5 +356,24 @@ status = "disabled"; }; }; + + vpu: vpu@d0100000 { + compatible = "amlogic,meson-gx-vpu"; + reg = <0x0 0xd0100000 0x0 0x100000>, + <0x0 0xc883c000 0x0 0x1000>, + <0x0 0xc8838000 0x0 0x1000>; + reg-names = "vpu", "hhi", "dmc"; + interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + + /* CVBS VDAC output port */ + port@0 { + reg = <0>; + + cvbs_vdac_out: endpoint { + }; + }; + }; }; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts index 9696820..390f7db 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts @@ -142,6 +142,17 @@ clocks = <&wifi32k>; clock-names = "ext_clock"; }; + + cvbs-connector { + compatible = "composite-video-connector"; + label = "cvbs"; + + port { + cvbs_connector_in: endpoint { + remote-endpoint = <&cvbs_vdac_out>; + }; + }; + }; }; &uart_AO { @@ -229,3 +240,7 @@ clocks = <&clkc CLKID_FCLK_DIV4>; clock-names = "clkin0"; }; + +&cvbs_vdac_out { + remote-endpoint = <&cvbs_connector_in>; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi index 203be28..44bdebf 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi @@ -125,6 +125,17 @@ clocks = <&wifi32k>; clock-names = "ext_clock"; }; + + cvbs-connector { + compatible = "composite-video-connector"; + label = "cvbs"; + + port { + cvbs_connector_in: endpoint { + remote-endpoint = <&cvbs_vdac_out>; + }; + }; + }; }; /* This UART is brought out to the DB9 connector */ @@ -234,3 +245,7 @@ clocks = <&clkc CLKID_FCLK_DIV4>; clock-names = "clkin0"; }; + +&cvbs_vdac_out { + remote-endpoint = <&cvbs_connector_in>; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi index ac5ad3b..5353a20 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi @@ -506,3 +506,7 @@ <&clkc CLKID_FCLK_DIV2>; clock-names = "core", "clkin0", "clkin1"; }; + +&vpu { + compatible = "amlogic,meson-gxbb-vpu", "amlogic,meson-gx-vpu"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-nexbox-a95x.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-nexbox-a95x.dts index e99101a..7bd0538 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-nexbox-a95x.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-nexbox-a95x.dts @@ -117,6 +117,17 @@ clocks = <&wifi32k>; clock-names = "ext_clock"; }; + + cvbs-connector { + compatible = "composite-video-connector"; + label = "cvbs"; + + port { + cvbs_connector_in: endpoint { + remote-endpoint = <&cvbs_vdac_out>; + }; + }; + }; }; &uart_AO { @@ -203,3 +214,7 @@ clocks = <&clkc CLKID_FCLK_DIV4>; clock-names = "clkin0"; }; + +&cvbs_vdac_out { + remote-endpoint = <&cvbs_connector_in>; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi index 9f89b99..5c7a8fa 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi @@ -299,3 +299,7 @@ <&clkc CLKID_FCLK_DIV2>; clock-names = "core", "clkin0", "clkin1"; }; + +&vpu { + compatible = "amlogic,meson-gxl-vpu", "amlogic,meson-gx-vpu"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts index d320727..5b99749 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts @@ -90,6 +90,17 @@ compatible = "mmc-pwrseq-emmc"; reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; }; + + cvbs-connector { + compatible = "composite-video-connector"; + label = "cvbs"; + + port { + cvbs_connector_in: endpoint { + remote-endpoint = <&cvbs_vdac_out>; + }; + }; + }; }; /* This UART is brought out to the DB9 connector */ @@ -167,3 +178,7 @@ max-speed = <1000>; }; }; + +&cvbs_vdac_out { + remote-endpoint = <&cvbs_connector_in>; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi index c1974bb..eb2f0c3 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi @@ -112,3 +112,7 @@ }; }; }; + +&vpu { + compatible = "amlogic,meson-gxm-vpu", "amlogic,meson-gx-vpu"; +};
Add Video Processing Unit and CVBS Output nodes, and enable CVBS on selected boards. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> --- arch/arm64/boot/dts/amlogic/meson-gx.dtsi | 19 +++++++++++++++++++ .../arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts | 15 +++++++++++++++ arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi | 15 +++++++++++++++ arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 4 ++++ arch/arm64/boot/dts/amlogic/meson-gxl-nexbox-a95x.dts | 15 +++++++++++++++ arch/arm64/boot/dts/amlogic/meson-gxl.dtsi | 4 ++++ arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts | 15 +++++++++++++++ arch/arm64/boot/dts/amlogic/meson-gxm.dtsi | 4 ++++ 8 files changed, 91 insertions(+)