diff mbox

[v6,1/8] MFD: add bindings for STM32 Timers driver

Message ID 1481292919-26587-2-git-send-email-benjamin.gaignard@st.com (mailing list archive)
State New, archived
Headers show

Commit Message

Benjamin Gaignard Dec. 9, 2016, 2:15 p.m. UTC
Add bindings information for STM32 Timers

version 6:
- rename stm32-gtimer to stm32-timers
- change compatible
- add description about the IPs

version 2:
- rename stm32-mfd-timer to stm32-gptimer
- only keep one compatible string

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
---
 .../devicetree/bindings/mfd/stm32-timers.txt       | 46 ++++++++++++++++++++++
 1 file changed, 46 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mfd/stm32-timers.txt

Comments

Lee Jones Dec. 12, 2016, 7:46 a.m. UTC | #1
On Fri, 09 Dec 2016, Benjamin Gaignard wrote:

> Add bindings information for STM32 Timers
> 
> version 6:
> - rename stm32-gtimer to stm32-timers
> - change compatible
> - add description about the IPs
> 
> version 2:
> - rename stm32-mfd-timer to stm32-gptimer
> - only keep one compatible string
> 
> Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
> ---
>  .../devicetree/bindings/mfd/stm32-timers.txt       | 46 ++++++++++++++++++++++
>  1 file changed, 46 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mfd/stm32-timers.txt

For my own reference:
  Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org>

> diff --git a/Documentation/devicetree/bindings/mfd/stm32-timers.txt b/Documentation/devicetree/bindings/mfd/stm32-timers.txt
> new file mode 100644
> index 0000000..b30868e
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/stm32-timers.txt
> @@ -0,0 +1,46 @@
> +STM32 Timers driver bindings
> +
> +This IP provides 3 types of timer along with PWM functionality:
> +- advanced-control timers consist of a 16-bit auto-reload counter driven by a programmable
> +  prescaler, break input feature, PWM outputs and complementary PWM ouputs channels.
> +- general-purpose timers consist of a 16-bit or 32-bit auto-reload counter driven by a
> +  programmable prescaler and PWM outputs.
> +- basic timers consist of a 16-bit auto-reload counter driven by a programmable prescaler.
> +
> +Required parameters:
> +- compatible: must be "st,stm32-timers"
> +
> +- reg:			Physical base address and length of the controller's
> +			registers.
> +- clock-names: 		Set to "clk_int".
> +- clocks: 		Phandle to the clock used by the timer module.
> +			For Clk properties, please refer to ../clock/clock-bindings.txt
> +
> +Optional parameters:
> +- resets:		Phandle to the parent reset controller.
> +			See ../reset/st,stm32-rcc.txt
> +
> +Optional subnodes:
> +- pwm:			See ../pwm/pwm-stm32.txt
> +- timer:		See ../iio/timer/stm32-timer-trigger.txt
> +
> +Example:
> +	timers@40010000 {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		compatible = "st,stm32-timers";
> +		reg = <0x40010000 0x400>;
> +		clocks = <&rcc 0 160>;
> +		clock-names = "clk_int";
> +
> +		pwm {
> +			compatible = "st,stm32-pwm";
> +			pinctrl-0	= <&pwm1_pins>;
> +			pinctrl-names	= "default";
> +		};
> +
> +		timer {
> +			compatible = "st,stm32-timer-trigger";
> +			reg = <0>;
> +		};
> +	};
Rob Herring Dec. 12, 2016, 6:51 p.m. UTC | #2
On Fri, Dec 09, 2016 at 03:15:12PM +0100, Benjamin Gaignard wrote:
> Add bindings information for STM32 Timers
> 
> version 6:
> - rename stm32-gtimer to stm32-timers
> - change compatible
> - add description about the IPs
> 
> version 2:
> - rename stm32-mfd-timer to stm32-gptimer
> - only keep one compatible string
> 
> Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
> ---
>  .../devicetree/bindings/mfd/stm32-timers.txt       | 46 ++++++++++++++++++++++
>  1 file changed, 46 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mfd/stm32-timers.txt
> 
> diff --git a/Documentation/devicetree/bindings/mfd/stm32-timers.txt b/Documentation/devicetree/bindings/mfd/stm32-timers.txt
> new file mode 100644
> index 0000000..b30868e
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/stm32-timers.txt
> @@ -0,0 +1,46 @@
> +STM32 Timers driver bindings
> +
> +This IP provides 3 types of timer along with PWM functionality:
> +- advanced-control timers consist of a 16-bit auto-reload counter driven by a programmable
> +  prescaler, break input feature, PWM outputs and complementary PWM ouputs channels.
> +- general-purpose timers consist of a 16-bit or 32-bit auto-reload counter driven by a
> +  programmable prescaler and PWM outputs.
> +- basic timers consist of a 16-bit auto-reload counter driven by a programmable prescaler.
> +
> +Required parameters:
> +- compatible: must be "st,stm32-timers"
> +
> +- reg:			Physical base address and length of the controller's
> +			registers.
> +- clock-names: 		Set to "clk_int".

'clk' is redundant. Also, you don't really need -names when there is 
only one of them.

> +- clocks: 		Phandle to the clock used by the timer module.
> +			For Clk properties, please refer to ../clock/clock-bindings.txt
> +
> +Optional parameters:
> +- resets:		Phandle to the parent reset controller.
> +			See ../reset/st,stm32-rcc.txt
> +
> +Optional subnodes:
> +- pwm:			See ../pwm/pwm-stm32.txt
> +- timer:		See ../iio/timer/stm32-timer-trigger.txt
> +
> +Example:
> +	timers@40010000 {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		compatible = "st,stm32-timers";
> +		reg = <0x40010000 0x400>;
> +		clocks = <&rcc 0 160>;
> +		clock-names = "clk_int";
> +
> +		pwm {
> +			compatible = "st,stm32-pwm";
> +			pinctrl-0	= <&pwm1_pins>;
> +			pinctrl-names	= "default";
> +		};
> +
> +		timer {
> +			compatible = "st,stm32-timer-trigger";
> +			reg = <0>;

You don't need reg here as there is only one. In turn, you don't need 
#address-cells or #size-cells.

> +		};
> +	};
> -- 
> 1.9.1
>
Benjamin Gaignard Dec. 13, 2016, 9:29 a.m. UTC | #3
2016-12-12 19:51 GMT+01:00 Rob Herring <robh@kernel.org>:
> On Fri, Dec 09, 2016 at 03:15:12PM +0100, Benjamin Gaignard wrote:
>> Add bindings information for STM32 Timers
>>
>> version 6:
>> - rename stm32-gtimer to stm32-timers
>> - change compatible
>> - add description about the IPs
>>
>> version 2:
>> - rename stm32-mfd-timer to stm32-gptimer
>> - only keep one compatible string
>>
>> Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
>> ---
>>  .../devicetree/bindings/mfd/stm32-timers.txt       | 46 ++++++++++++++++++++++
>>  1 file changed, 46 insertions(+)
>>  create mode 100644 Documentation/devicetree/bindings/mfd/stm32-timers.txt
>>
>> diff --git a/Documentation/devicetree/bindings/mfd/stm32-timers.txt b/Documentation/devicetree/bindings/mfd/stm32-timers.txt
>> new file mode 100644
>> index 0000000..b30868e
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/mfd/stm32-timers.txt
>> @@ -0,0 +1,46 @@
>> +STM32 Timers driver bindings
>> +
>> +This IP provides 3 types of timer along with PWM functionality:
>> +- advanced-control timers consist of a 16-bit auto-reload counter driven by a programmable
>> +  prescaler, break input feature, PWM outputs and complementary PWM ouputs channels.
>> +- general-purpose timers consist of a 16-bit or 32-bit auto-reload counter driven by a
>> +  programmable prescaler and PWM outputs.
>> +- basic timers consist of a 16-bit auto-reload counter driven by a programmable prescaler.
>> +
>> +Required parameters:
>> +- compatible: must be "st,stm32-timers"
>> +
>> +- reg:                       Physical base address and length of the controller's
>> +                     registers.
>> +- clock-names:               Set to "clk_int".
>
> 'clk' is redundant. Also, you don't really need -names when there is
> only one of them.

I use devm_regmap_init_mmio_clk() which get the clock by it name so
I have to define it in DT.

>> +- clocks:            Phandle to the clock used by the timer module.
>> +                     For Clk properties, please refer to ../clock/clock-bindings.txt
>> +
>> +Optional parameters:
>> +- resets:            Phandle to the parent reset controller.
>> +                     See ../reset/st,stm32-rcc.txt
>> +
>> +Optional subnodes:
>> +- pwm:                       See ../pwm/pwm-stm32.txt
>> +- timer:             See ../iio/timer/stm32-timer-trigger.txt
>> +
>> +Example:
>> +     timers@40010000 {
>> +             #address-cells = <1>;
>> +             #size-cells = <0>;
>> +             compatible = "st,stm32-timers";
>> +             reg = <0x40010000 0x400>;
>> +             clocks = <&rcc 0 160>;
>> +             clock-names = "clk_int";
>> +
>> +             pwm {
>> +                     compatible = "st,stm32-pwm";
>> +                     pinctrl-0       = <&pwm1_pins>;
>> +                     pinctrl-names   = "default";
>> +             };
>> +
>> +             timer {
>> +                     compatible = "st,stm32-timer-trigger";
>> +                     reg = <0>;
>
> You don't need reg here as there is only one. In turn, you don't need
> #address-cells or #size-cells.

I use "reg" to set each timer configuration.
From hardware point of view they are all the same except for which hardware
signals they could consume and/or send.
"reg" is used as index of the two tables in driver code.

>
>> +             };
>> +     };
>> --
>> 1.9.1
>>
Rob Herring Dec. 13, 2016, 9:07 p.m. UTC | #4
On Tue, Dec 13, 2016 at 3:29 AM, Benjamin Gaignard
<benjamin.gaignard@linaro.org> wrote:
> 2016-12-12 19:51 GMT+01:00 Rob Herring <robh@kernel.org>:
>> On Fri, Dec 09, 2016 at 03:15:12PM +0100, Benjamin Gaignard wrote:
>>> Add bindings information for STM32 Timers
>>>
>>> version 6:
>>> - rename stm32-gtimer to stm32-timers
>>> - change compatible
>>> - add description about the IPs
>>>
>>> version 2:
>>> - rename stm32-mfd-timer to stm32-gptimer
>>> - only keep one compatible string
>>>
>>> Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
>>> ---
>>>  .../devicetree/bindings/mfd/stm32-timers.txt       | 46 ++++++++++++++++++++++
>>>  1 file changed, 46 insertions(+)
>>>  create mode 100644 Documentation/devicetree/bindings/mfd/stm32-timers.txt
>>>
>>> diff --git a/Documentation/devicetree/bindings/mfd/stm32-timers.txt b/Documentation/devicetree/bindings/mfd/stm32-timers.txt
>>> new file mode 100644
>>> index 0000000..b30868e
>>> --- /dev/null
>>> +++ b/Documentation/devicetree/bindings/mfd/stm32-timers.txt
>>> @@ -0,0 +1,46 @@
>>> +STM32 Timers driver bindings
>>> +
>>> +This IP provides 3 types of timer along with PWM functionality:
>>> +- advanced-control timers consist of a 16-bit auto-reload counter driven by a programmable
>>> +  prescaler, break input feature, PWM outputs and complementary PWM ouputs channels.
>>> +- general-purpose timers consist of a 16-bit or 32-bit auto-reload counter driven by a
>>> +  programmable prescaler and PWM outputs.
>>> +- basic timers consist of a 16-bit auto-reload counter driven by a programmable prescaler.
>>> +
>>> +Required parameters:
>>> +- compatible: must be "st,stm32-timers"
>>> +
>>> +- reg:                       Physical base address and length of the controller's
>>> +                     registers.
>>> +- clock-names:               Set to "clk_int".
>>
>> 'clk' is redundant. Also, you don't really need -names when there is
>> only one of them.
>
> I use devm_regmap_init_mmio_clk() which get the clock by it name so
> I have to define it in DT.

Are you sure NULL is not allowed? I don't know, but at least clk_get()
allows NULL.

It's fine to keep, just drop the "clk_" part.

>
>>> +- clocks:            Phandle to the clock used by the timer module.
>>> +                     For Clk properties, please refer to ../clock/clock-bindings.txt
>>> +
>>> +Optional parameters:
>>> +- resets:            Phandle to the parent reset controller.
>>> +                     See ../reset/st,stm32-rcc.txt
>>> +
>>> +Optional subnodes:
>>> +- pwm:                       See ../pwm/pwm-stm32.txt
>>> +- timer:             See ../iio/timer/stm32-timer-trigger.txt
>>> +
>>> +Example:
>>> +     timers@40010000 {
>>> +             #address-cells = <1>;
>>> +             #size-cells = <0>;
>>> +             compatible = "st,stm32-timers";
>>> +             reg = <0x40010000 0x400>;
>>> +             clocks = <&rcc 0 160>;
>>> +             clock-names = "clk_int";
>>> +
>>> +             pwm {
>>> +                     compatible = "st,stm32-pwm";
>>> +                     pinctrl-0       = <&pwm1_pins>;
>>> +                     pinctrl-names   = "default";
>>> +             };
>>> +
>>> +             timer {
>>> +                     compatible = "st,stm32-timer-trigger";
>>> +                     reg = <0>;
>>
>> You don't need reg here as there is only one. In turn, you don't need
>> #address-cells or #size-cells.
>
> I use "reg" to set each timer configuration.
> From hardware point of view they are all the same except for which hardware
> signals they could consume and/or send.

This sounds okay, but...

> "reg" is used as index of the two tables in driver code.

this statement doesn't really sound like valid use of reg.

If you keep reg, then the node needs a unit address (timer@0).

Rob
Benjamin Gaignard Dec. 14, 2016, 1:07 p.m. UTC | #5
2016-12-13 22:07 GMT+01:00 Rob Herring <robh@kernel.org>:
> On Tue, Dec 13, 2016 at 3:29 AM, Benjamin Gaignard
> <benjamin.gaignard@linaro.org> wrote:
>> 2016-12-12 19:51 GMT+01:00 Rob Herring <robh@kernel.org>:
>>> On Fri, Dec 09, 2016 at 03:15:12PM +0100, Benjamin Gaignard wrote:
>>>> Add bindings information for STM32 Timers
>>>>
>>>> version 6:
>>>> - rename stm32-gtimer to stm32-timers
>>>> - change compatible
>>>> - add description about the IPs
>>>>
>>>> version 2:
>>>> - rename stm32-mfd-timer to stm32-gptimer
>>>> - only keep one compatible string
>>>>
>>>> Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
>>>> ---
>>>>  .../devicetree/bindings/mfd/stm32-timers.txt       | 46 ++++++++++++++++++++++
>>>>  1 file changed, 46 insertions(+)
>>>>  create mode 100644 Documentation/devicetree/bindings/mfd/stm32-timers.txt
>>>>
>>>> diff --git a/Documentation/devicetree/bindings/mfd/stm32-timers.txt b/Documentation/devicetree/bindings/mfd/stm32-timers.txt
>>>> new file mode 100644
>>>> index 0000000..b30868e
>>>> --- /dev/null
>>>> +++ b/Documentation/devicetree/bindings/mfd/stm32-timers.txt
>>>> @@ -0,0 +1,46 @@
>>>> +STM32 Timers driver bindings
>>>> +
>>>> +This IP provides 3 types of timer along with PWM functionality:
>>>> +- advanced-control timers consist of a 16-bit auto-reload counter driven by a programmable
>>>> +  prescaler, break input feature, PWM outputs and complementary PWM ouputs channels.
>>>> +- general-purpose timers consist of a 16-bit or 32-bit auto-reload counter driven by a
>>>> +  programmable prescaler and PWM outputs.
>>>> +- basic timers consist of a 16-bit auto-reload counter driven by a programmable prescaler.
>>>> +
>>>> +Required parameters:
>>>> +- compatible: must be "st,stm32-timers"
>>>> +
>>>> +- reg:                       Physical base address and length of the controller's
>>>> +                     registers.
>>>> +- clock-names:               Set to "clk_int".
>>>
>>> 'clk' is redundant. Also, you don't really need -names when there is
>>> only one of them.
>>
>> I use devm_regmap_init_mmio_clk() which get the clock by it name so
>> I have to define it in DT.
>
> Are you sure NULL is not allowed? I don't know, but at least clk_get()
> allows NULL.

regmap_mmio_gen_context() doesn't call clk_get() if the clock name isn't set:
https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/drivers/base/regmap/regmap-mmio.c?id=refs/tags/v4.9#n308

so clock-names field is really needed.

> It's fine to keep, just drop the "clk_" part.

ok

>
>>
>>>> +- clocks:            Phandle to the clock used by the timer module.
>>>> +                     For Clk properties, please refer to ../clock/clock-bindings.txt
>>>> +
>>>> +Optional parameters:
>>>> +- resets:            Phandle to the parent reset controller.
>>>> +                     See ../reset/st,stm32-rcc.txt
>>>> +
>>>> +Optional subnodes:
>>>> +- pwm:                       See ../pwm/pwm-stm32.txt
>>>> +- timer:             See ../iio/timer/stm32-timer-trigger.txt
>>>> +
>>>> +Example:
>>>> +     timers@40010000 {
>>>> +             #address-cells = <1>;
>>>> +             #size-cells = <0>;
>>>> +             compatible = "st,stm32-timers";
>>>> +             reg = <0x40010000 0x400>;
>>>> +             clocks = <&rcc 0 160>;
>>>> +             clock-names = "clk_int";
>>>> +
>>>> +             pwm {
>>>> +                     compatible = "st,stm32-pwm";
>>>> +                     pinctrl-0       = <&pwm1_pins>;
>>>> +                     pinctrl-names   = "default";
>>>> +             };
>>>> +
>>>> +             timer {
>>>> +                     compatible = "st,stm32-timer-trigger";
>>>> +                     reg = <0>;
>>>
>>> You don't need reg here as there is only one. In turn, you don't need
>>> #address-cells or #size-cells.
>>
>> I use "reg" to set each timer configuration.
>> From hardware point of view they are all the same except for which hardware
>> signals they could consume and/or send.
>
> This sounds okay, but...
>
>> "reg" is used as index of the two tables in driver code.
>
> this statement doesn't really sound like valid use of reg.
>
> If you keep reg, then the node needs a unit address (timer@0).

I will do that in next version but I will wait for other maintainers (PWM/IIO)
remarks before send it

Thanks

Benjamin
>
> Rob
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/mfd/stm32-timers.txt b/Documentation/devicetree/bindings/mfd/stm32-timers.txt
new file mode 100644
index 0000000..b30868e
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/stm32-timers.txt
@@ -0,0 +1,46 @@ 
+STM32 Timers driver bindings
+
+This IP provides 3 types of timer along with PWM functionality:
+- advanced-control timers consist of a 16-bit auto-reload counter driven by a programmable
+  prescaler, break input feature, PWM outputs and complementary PWM ouputs channels.
+- general-purpose timers consist of a 16-bit or 32-bit auto-reload counter driven by a
+  programmable prescaler and PWM outputs.
+- basic timers consist of a 16-bit auto-reload counter driven by a programmable prescaler.
+
+Required parameters:
+- compatible: must be "st,stm32-timers"
+
+- reg:			Physical base address and length of the controller's
+			registers.
+- clock-names: 		Set to "clk_int".
+- clocks: 		Phandle to the clock used by the timer module.
+			For Clk properties, please refer to ../clock/clock-bindings.txt
+
+Optional parameters:
+- resets:		Phandle to the parent reset controller.
+			See ../reset/st,stm32-rcc.txt
+
+Optional subnodes:
+- pwm:			See ../pwm/pwm-stm32.txt
+- timer:		See ../iio/timer/stm32-timer-trigger.txt
+
+Example:
+	timers@40010000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "st,stm32-timers";
+		reg = <0x40010000 0x400>;
+		clocks = <&rcc 0 160>;
+		clock-names = "clk_int";
+
+		pwm {
+			compatible = "st,stm32-pwm";
+			pinctrl-0	= <&pwm1_pins>;
+			pinctrl-names	= "default";
+		};
+
+		timer {
+			compatible = "st,stm32-timer-trigger";
+			reg = <0>;
+		};
+	};