diff mbox

[v2,12/14] ARM: dts: da850: add pinmux settings for the SATA controller

Message ID 1484655976-25382-13-git-send-email-bgolaszewski@baylibre.com (mailing list archive)
State New, archived
Headers show

Commit Message

Bartosz Golaszewski Jan. 17, 2017, 12:26 p.m. UTC 
Add pinmux sub-nodes for all muxed SATA pins.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 arch/arm/boot/dts/da850.dtsi | 24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)

Comments

Sekhar Nori Jan. 18, 2017, 9:39 a.m. UTC | #1 
Hi Bartosz,

On Tuesday 17 January 2017 05:56 PM, Bartosz Golaszewski wrote:
> Add pinmux sub-nodes for all muxed SATA pins.
> 
> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>

Since these are all unused at this time, we should drop adding them
until a time someone really needs these.

Thanks,
Sekhar
diff mbox

Patch

diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi
index 104155d..1f6a47d 100644
--- a/arch/arm/boot/dts/da850.dtsi
+++ b/arch/arm/boot/dts/da850.dtsi
@@ -78,6 +78,30 @@ 
 					0x10 0x00220000 0x00ff0000
 				>;
 			};
+			sata_cp_det_pin: pinmux_sata_cp_det_pin {
+				pinctrl-single,bits = <
+					/* SATA_CP_DET */
+					0x0c 0x00000000 0xf0000000
+				>;
+			};
+			sata_mp_switch_pin: pinmux_sata_mp_switch_pin {
+				pinctrl-single,bits = <
+					/* SATA_MP_SWITCH */
+					0x0c 0x00000000 0x0f000000
+				>;
+			};
+			sata_cp_pod_pin: pinmux_sata_cp_pod_pin {
+				pinctrl-single,bits = <
+					/* SATA_CP_POD */
+					0x10 0x40000000 0xf0000000
+				>;
+			};
+			sata_led_pin: pinmux_sata_led_pin {
+				pinctrl-single,bits = <
+					/* SATA_LED */
+					0x10 0x04000000 0x0f000000
+				>;
+			};
 			i2c0_pins: pinmux_i2c0_pins {
 				pinctrl-single,bits = <
 					/* I2C0_SDA,I2C0_SCL */