| Message ID | 1484758245-9354-1-git-send-email-narmstrong@baylibre.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Neil Armstrong <narmstrong@baylibre.com> writes: > The Amlogic Meson GXBB/GXL/GXM secure monitor uses part of the memory space, > this patch adds these reserved zones. Applying to v4.10/fixes for broader testing. Will wait for ack from Andreas befores submitting to arm-soc fixes. Kevin > Without such reserved memory zones, running the following stress command : > $ stress-ng --vm 16 --vm-bytes 128M --timeout 10s > multiple times: > > Could lead to the following kernel crashes : > [ 46.937975] Bad mode in Error handler detected on CPU1, code 0xbf000000 -- SError > ... > [ 47.058536] Internal error: Attempting to execute userspace memory: 8600000f [#3] PREEMPT SMP > ... > Instead of the OOM killer. > > Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> > --- > arch/arm64/boot/dts/amlogic/meson-gx.dtsi | 18 ++++++++++++++++++ > 1 file changed, 18 insertions(+) > > Changes since v4 at [5]: > - Move start of ddr memory to reserved-memory node > - Drop memory node move > - Fix typo in sizes > > Changes since resent v2 at [4]: > - Fix invalid comment of useable memory attributes > > Changes since original v2 at [3]: > - Typo in commit 2GiB -> 1GiB, 4GiB -> 2GiB > > Changes since v2 at [2]: > - Moved all memory node out of dtsi > - Added comment about useable memory > - Fixed comment about secmon reserved zone > > Changes since v1 at [1] : > - Renamed reg into linux,usable-memory to ovveride u-boot memory > - only kept secmon memory zone > > [1] http://lkml.kernel.org/r/20161212101801.28491-1-narmstrong@baylibre.com > [2] http://lkml.kernel.org/r/1483105232-6242-1-git-send-email-narmstrong@baylibre.com > [3] http://lkml.kernel.org/r/1484128128-22454-1-git-send-email-narmstrong@baylibre.com > [4] http://lkml.kernel.org/r/1484128540-22662-1-git-send-email-narmstrong@baylibre.com > [5] http://lkml.kernel.org/r/1484129414-23325-1-git-send-email-narmstrong@baylibre.com > > diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi > index eada0b5..63d52b7 100644 > --- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi > +++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi > @@ -55,6 +55,24 @@ > #address-cells = <2>; > #size-cells = <2>; > > + reserved-memory { > + #address-cells = <2>; > + #size-cells = <2>; > + ranges; > + > + /* 16 MiB reserved for Hardware ROM Firmware */ > + hwrom: hwrom { > + reg = <0x0 0x0 0x0 0x1000000>; > + no-map; > + }; > + > + /* 2 MiB reserved for ARM Trusted Firmware (BL31) */ > + secmon: secmon { > + reg = <0x0 0x10000000 0x0 0x200000>; > + no-map; > + }; > + }; > + > cpus { > #address-cells = <0x2>; > #size-cells = <0x0>;
Hi, Am 18.01.2017 um 17:50 schrieb Neil Armstrong: > The Amlogic Meson GXBB/GXL/GXM secure monitor uses part of the memory space, > this patch adds these reserved zones. > > Without such reserved memory zones, running the following stress command : > $ stress-ng --vm 16 --vm-bytes 128M --timeout 10s > multiple times: > > Could lead to the following kernel crashes : > [ 46.937975] Bad mode in Error handler detected on CPU1, code 0xbf000000 -- SError > ... > [ 47.058536] Internal error: Attempting to execute userspace memory: 8600000f [#3] PREEMPT SMP > ... > Instead of the OOM killer. > I miss a Fixes: or Cc: here for the backport you desired. To have it fixed back to my very introduction: Fixes: 4f24eda8401f ("ARM64: dts: Prepare configs for Amlogic Meson GXBaby") People backporting it would need to handle the meson-{gx => gxbb}.dtsi transition for 4.9 down to 4.6, which seems fairly straightforward. > Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> > --- > arch/arm64/boot/dts/amlogic/meson-gx.dtsi | 18 ++++++++++++++++++ > 1 file changed, 18 insertions(+) > > Changes since v4 at [5]: > - Move start of ddr memory to reserved-memory node > - Drop memory node move > - Fix typo in sizes > > Changes since resent v2 at [4]: > - Fix invalid comment of useable memory attributes > > Changes since original v2 at [3]: > - Typo in commit 2GiB -> 1GiB, 4GiB -> 2GiB > > Changes since v2 at [2]: > - Moved all memory node out of dtsi > - Added comment about useable memory > - Fixed comment about secmon reserved zone > > Changes since v1 at [1] : > - Renamed reg into linux,usable-memory to ovveride u-boot memory > - only kept secmon memory zone > > [1] http://lkml.kernel.org/r/20161212101801.28491-1-narmstrong@baylibre.com > [2] http://lkml.kernel.org/r/1483105232-6242-1-git-send-email-narmstrong@baylibre.com > [3] http://lkml.kernel.org/r/1484128128-22454-1-git-send-email-narmstrong@baylibre.com > [4] http://lkml.kernel.org/r/1484128540-22662-1-git-send-email-narmstrong@baylibre.com > [5] http://lkml.kernel.org/r/1484129414-23325-1-git-send-email-narmstrong@baylibre.com > > diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi > index eada0b5..63d52b7 100644 > --- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi > +++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi > @@ -55,6 +55,24 @@ > #address-cells = <2>; > #size-cells = <2>; > > + reserved-memory { > + #address-cells = <2>; > + #size-cells = <2>; > + ranges; > + > + /* 16 MiB reserved for Hardware ROM Firmware */ > + hwrom: hwrom { Both sub-nodes get a label that is unused, but reserved-memory itself does not (my v4 remark). Intentional? > + reg = <0x0 0x0 0x0 0x1000000>; > + no-map; > + }; > + > + /* 2 MiB reserved for ARM Trusted Firmware (BL31) */ > + secmon: secmon { I note that this .dtsi further down has a node /firmware/secure-monitor with label sm. a) Is there any naming convention such as secmon_mem to adopt here to avoid mixups with sm? b) Should this secmon node be referenced in the secure-monitor node via memory-node = <&secmon>; to model their connection, thereby giving the label a use? Or should we maybe merge the two nodes by moving the compatible string here? https://git.kernel.org/cgit/linux/kernel/git/next/linux-next.git/tree/Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt > + reg = <0x0 0x10000000 0x0 0x200000>; > + no-map; > + }; > + }; > + > cpus { > #address-cells = <0x2>; > #size-cells = <0x0>; Anyway, objection resolved, Reviewed-by: Andreas Färber <afaerber@suse.de> I don't expect breakage from these more confined additions, but I can try to test tomorrow. Thanks, Andreas
Am 19.01.2017 um 01:20 schrieb Andreas Färber: > Hi, > > Am 18.01.2017 um 17:50 schrieb Neil Armstrong: >> The Amlogic Meson GXBB/GXL/GXM secure monitor uses part of the memory space, >> this patch adds these reserved zones. >> >> Without such reserved memory zones, running the following stress command : >> $ stress-ng --vm 16 --vm-bytes 128M --timeout 10s >> multiple times: >> >> Could lead to the following kernel crashes : >> [ 46.937975] Bad mode in Error handler detected on CPU1, code 0xbf000000 -- SError >> ... >> [ 47.058536] Internal error: Attempting to execute userspace memory: 8600000f [#3] PREEMPT SMP >> ... >> Instead of the OOM killer. >> > > I miss a Fixes: or Cc: here for the backport you desired. To have it > fixed back to my very introduction: > > Fixes: 4f24eda8401f ("ARM64: dts: Prepare configs for Amlogic Meson GXBaby") > > People backporting it would need to handle the meson-{gx => gxbb}.dtsi > transition for 4.9 down to 4.6, which seems fairly straightforward. > >> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> >> --- >> arch/arm64/boot/dts/amlogic/meson-gx.dtsi | 18 ++++++++++++++++++ >> 1 file changed, 18 insertions(+) >> >> Changes since v4 at [5]: >> - Move start of ddr memory to reserved-memory node >> - Drop memory node move >> - Fix typo in sizes >> >> Changes since resent v2 at [4]: >> - Fix invalid comment of useable memory attributes >> >> Changes since original v2 at [3]: >> - Typo in commit 2GiB -> 1GiB, 4GiB -> 2GiB >> >> Changes since v2 at [2]: >> - Moved all memory node out of dtsi >> - Added comment about useable memory >> - Fixed comment about secmon reserved zone >> >> Changes since v1 at [1] : >> - Renamed reg into linux,usable-memory to ovveride u-boot memory >> - only kept secmon memory zone >> >> [1] http://lkml.kernel.org/r/20161212101801.28491-1-narmstrong@baylibre.com >> [2] http://lkml.kernel.org/r/1483105232-6242-1-git-send-email-narmstrong@baylibre.com >> [3] http://lkml.kernel.org/r/1484128128-22454-1-git-send-email-narmstrong@baylibre.com >> [4] http://lkml.kernel.org/r/1484128540-22662-1-git-send-email-narmstrong@baylibre.com >> [5] http://lkml.kernel.org/r/1484129414-23325-1-git-send-email-narmstrong@baylibre.com >> >> diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi >> index eada0b5..63d52b7 100644 >> --- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi >> +++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi >> @@ -55,6 +55,24 @@ >> #address-cells = <2>; >> #size-cells = <2>; >> >> + reserved-memory { >> + #address-cells = <2>; >> + #size-cells = <2>; >> + ranges; >> + >> + /* 16 MiB reserved for Hardware ROM Firmware */ >> + hwrom: hwrom { > > Both sub-nodes get a label that is unused, but reserved-memory itself > does not (my v4 remark). Intentional? > >> + reg = <0x0 0x0 0x0 0x1000000>; >> + no-map; >> + }; >> + >> + /* 2 MiB reserved for ARM Trusted Firmware (BL31) */ >> + secmon: secmon { > > I note that this .dtsi further down has a node /firmware/secure-monitor > with label sm. > a) Is there any naming convention such as secmon_mem to adopt here to > avoid mixups with sm? > b) Should this secmon node be referenced in the secure-monitor node via > memory-node = <&secmon>; to model their connection, thereby giving the > label a use? Or should we maybe merge the two nodes by moving the > compatible string here? > > https://git.kernel.org/cgit/linux/kernel/git/next/linux-next.git/tree/Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt Answering my own question: the example labels use _reserved suffix. >> + reg = <0x0 0x10000000 0x0 0x200000>; And since we use a reg property here, the node name should get a unit address to avoid future dtc warnings/errors. Ditto for hwrom. >> + no-map; >> + }; >> + }; >> + >> cpus { >> #address-cells = <0x2>; >> #size-cells = <0x0>; > > Anyway, objection resolved, > > Reviewed-by: Andreas Färber <afaerber@suse.de> > > I don't expect breakage from these more confined additions, but I can > try to test tomorrow. > > Thanks, > Andreas >
diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi index eada0b5..63d52b7 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi @@ -55,6 +55,24 @@ #address-cells = <2>; #size-cells = <2>; + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + /* 16 MiB reserved for Hardware ROM Firmware */ + hwrom: hwrom { + reg = <0x0 0x0 0x0 0x1000000>; + no-map; + }; + + /* 2 MiB reserved for ARM Trusted Firmware (BL31) */ + secmon: secmon { + reg = <0x0 0x10000000 0x0 0x200000>; + no-map; + }; + }; + cpus { #address-cells = <0x2>; #size-cells = <0x0>;
The Amlogic Meson GXBB/GXL/GXM secure monitor uses part of the memory space, this patch adds these reserved zones. Without such reserved memory zones, running the following stress command : $ stress-ng --vm 16 --vm-bytes 128M --timeout 10s multiple times: Could lead to the following kernel crashes : [ 46.937975] Bad mode in Error handler detected on CPU1, code 0xbf000000 -- SError ... [ 47.058536] Internal error: Attempting to execute userspace memory: 8600000f [#3] PREEMPT SMP ... Instead of the OOM killer. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> --- arch/arm64/boot/dts/amlogic/meson-gx.dtsi | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) Changes since v4 at [5]: - Move start of ddr memory to reserved-memory node - Drop memory node move - Fix typo in sizes Changes since resent v2 at [4]: - Fix invalid comment of useable memory attributes Changes since original v2 at [3]: - Typo in commit 2GiB -> 1GiB, 4GiB -> 2GiB Changes since v2 at [2]: - Moved all memory node out of dtsi - Added comment about useable memory - Fixed comment about secmon reserved zone Changes since v1 at [1] : - Renamed reg into linux,usable-memory to ovveride u-boot memory - only kept secmon memory zone [1] http://lkml.kernel.org/r/20161212101801.28491-1-narmstrong@baylibre.com [2] http://lkml.kernel.org/r/1483105232-6242-1-git-send-email-narmstrong@baylibre.com [3] http://lkml.kernel.org/r/1484128128-22454-1-git-send-email-narmstrong@baylibre.com [4] http://lkml.kernel.org/r/1484128540-22662-1-git-send-email-narmstrong@baylibre.com [5] http://lkml.kernel.org/r/1484129414-23325-1-git-send-email-narmstrong@baylibre.com