@@ -340,6 +340,65 @@
status = "disabled";
};
+ usb1: usb@1a1c0000 {
+ compatible = "mediatek,mt7623-xhci",
+ "mediatek,mt8173-xhci";
+ reg = <0 0x1a1c0000 0 0x1000>,
+ <0 0x1a1c4700 0 0x0100>;
+ reg-names = "mac", "ippc";
+ interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&hifsys CLK_HIFSYS_USB0PHY>,
+ <&topckgen CLK_TOP_ETHIF_SEL>;
+ clock-names = "sys_ck", "ethif";
+ power-domains = <&scpsys MT2701_POWER_DOMAIN_HIF>;
+ phys = <&phy_port0 PHY_TYPE_USB3>;
+ status = "disabled";
+ };
+
+ u3phy1: usb-phy@1a1c4000 {
+ compatible = "mediatek,mt7623-u3phy",
+ "mediatek,mt8173-u3phy";
+ reg = <0 0x1a1c4000 0 0x0700>;
+ clocks = <&clk26m>;
+ clock-names = "u3phya_ref";
+ #phy-cells = <1>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ status = "disabled";
+
+ phy_port0: phy_port0: port@1a1c4800 {
+ reg = <0 0x1a1c4800 0 0x800>;
+ #phy-cells = <1>;
+ status = "okay";
+ };
+ };
+
+ usb2: usb@1a240000 {
+ compatible = "mediatek,mt7623-xhci",
+ "mediatek,mt8173-xhci";
+ reg = <0 0x1a240000 0 0x1000>,
+ <0 0x1a244700 0 0x0100>;
+ interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&hifsys CLK_HIFSYS_USB1PHY>,
+ <&topckgen CLK_TOP_ETHIF_SEL>;
+ clock-names = "sys_ck", "ethif";
+ power-domains = <&scpsys MT2701_POWER_DOMAIN_HIF>;
+ phys = <&u3phy2 0>;
+ status = "disabled";
+ };
+
+ u3phy2: usb-phy@1a244000 {
+ compatible = "mediatek,mt7623-u3phy",
+ "mediatek,mt8173-u3phy";
+ reg = <0 0x1a244000 0 0x0700>,
+ <0 0x1a244800 0 0x0800>;
+ clocks = <&clk26m>;
+ clock-names = "u3phya_ref";
+ #phy-cells = <1>;
+ status = "disabled";
+ };
+
hifsys: syscon@1a000000 {
compatible = "mediatek,mt7623-hifsys",
"mediatek,mt2701-hifsys",
Add USB nodes to the mt7623.dtsi file. Signed-off-by: John Crispin <john@phrozen.org> --- arch/arm/boot/dts/mt7623.dtsi | 59 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 59 insertions(+)