diff mbox

[02/10] ARM: dts: da850-evm: fix whitespace errors

Message ID 1486485683-11427-3-git-send-email-bgolaszewski@baylibre.com (mailing list archive)
State New, archived
Headers show

Commit Message

Bartosz Golaszewski Feb. 7, 2017, 4:41 p.m. UTC
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 arch/arm/boot/dts/da850-evm.dts | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

Comments

Kevin Hilman Feb. 13, 2017, 6:28 p.m. UTC | #1
Bartosz Golaszewski <bgolaszewski@baylibre.com> writes:

> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>

Acked-by: Kevin Hilman <khilman@baylibre.com>

> ---
>  arch/arm/boot/dts/da850-evm.dts | 10 +++++-----
>  1 file changed, 5 insertions(+), 5 deletions(-)
>
> diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts
> index c970b6e..94938a3 100644
> --- a/arch/arm/boot/dts/da850-evm.dts
> +++ b/arch/arm/boot/dts/da850-evm.dts
> @@ -301,14 +301,14 @@
>  	/* VPIF capture port */
>  	port {
>  		vpif_ch0: endpoint@0 {
> -			  reg = <0>;
> -			  bus-width = <8>;
> +			reg = <0>;
> +			bus-width = <8>;
>  		};
>  
>  		vpif_ch1: endpoint@1 {
> -			  reg = <1>;
> -			  bus-width = <8>;
> -			  data-shift = <8>;
> +			reg = <1>;
> +			bus-width = <8>;
> +			data-shift = <8>;
>  		};
>  	};
>  };

Bartosz Golaszewski <bgolaszewski@baylibre.com> writes:

> Extend the vpif node with an output port with a single channel.
>
> NOTE: this is still just hardware description - the actual driver
> is registered using pdata-quirks.
>
> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
> ---
>  arch/arm/boot/dts/da850-evm.dts | 14 +++++++++++---
>  arch/arm/boot/dts/da850.dtsi    |  8 +++++++-
>  2 files changed, 18 insertions(+), 4 deletions(-)
>
> diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts
> index 94938a3..3d6dd66 100644
> --- a/arch/arm/boot/dts/da850-evm.dts
> +++ b/arch/arm/boot/dts/da850-evm.dts
> @@ -299,16 +299,24 @@
>  	status = "okay";
>  
>  	/* VPIF capture port */
> -	port {
> -		vpif_ch0: endpoint@0 {
> +	port@0 {
> +		vpif_input_ch0: endpoint@0 {
>  			reg = <0>;
>  			bus-width = <8>;
>  		};
>  
> -		vpif_ch1: endpoint@1 {
> +		vpif_input_ch1: endpoint@1 {
>  			reg = <1>;
>  			bus-width = <8>;
>  			data-shift = <8>;
>  		};
>  	};
> +
> +	/* VPIF display port */
> +	port@1 {
> +		vpif_output_ch0: endpoint@0 {
> +			reg = <0>;
> +			bus-width = <8>;
> +		};
> +	};
>  };
> diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi
> index 69ec5e7..768a58c 100644
> --- a/arch/arm/boot/dts/da850.dtsi
> +++ b/arch/arm/boot/dts/da850.dtsi
> @@ -494,7 +494,13 @@
>  			status = "disabled";
>  
>  			/* VPIF capture port */
> -			port {
> +			port@0 {
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +			};
> +
> +			/* VPIF display port */
> +			port@1 {
>  				#address-cells = <1>;
>  				#size-cells = <0>;
>  			};

Bartosz Golaszewski <bgolaszewski@baylibre.com> writes:

> There's a stray tab in da850_vpif_legacy_init(). Remove it.
>
> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
> ---
>  arch/arm/mach-davinci/pdata-quirks.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/arm/mach-davinci/pdata-quirks.c b/arch/arm/mach-davinci/pdata-quirks.c
> index a186513..94948c1 100644
> --- a/arch/arm/mach-davinci/pdata-quirks.c
> +++ b/arch/arm/mach-davinci/pdata-quirks.c
> @@ -111,7 +111,7 @@ static struct vpif_capture_config da850_vpif_capture_config = {
>  static void __init da850_vpif_legacy_init(void)
>  {
>  	int ret;
> -	
> +
>  	/* LCDK doesn't have the 2nd TVP514x on CH1 */
>  	if (of_machine_is_compatible("ti,da850-lcdk"))
>  		da850_vpif_capture_config.subdev_count = 1;
Kevin Hilman Feb. 13, 2017, 6:35 p.m. UTC | #2
Bartosz Golaszewski <bgolaszewski@baylibre.com> writes:

> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>

I'll fold this one into the original since it's not yet merged.

Kevin

> ---
>  arch/arm/boot/dts/da850-evm.dts | 10 +++++-----
>  1 file changed, 5 insertions(+), 5 deletions(-)
>
> diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts
> index c970b6e..94938a3 100644
> --- a/arch/arm/boot/dts/da850-evm.dts
> +++ b/arch/arm/boot/dts/da850-evm.dts
> @@ -301,14 +301,14 @@
>  	/* VPIF capture port */
>  	port {
>  		vpif_ch0: endpoint@0 {
> -			  reg = <0>;
> -			  bus-width = <8>;
> +			reg = <0>;
> +			bus-width = <8>;
>  		};
>  
>  		vpif_ch1: endpoint@1 {
> -			  reg = <1>;
> -			  bus-width = <8>;
> -			  data-shift = <8>;
> +			reg = <1>;
> +			bus-width = <8>;
> +			data-shift = <8>;
>  		};
>  	};
>  };
Kevin Hilman Feb. 13, 2017, 9:01 p.m. UTC | #3
Kevin Hilman <khilman@baylibre.com> writes:

> Bartosz Golaszewski <bgolaszewski@baylibre.com> writes:
>
>> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
>
> I'll fold this one into the original since it's not yet merged.

Oops, Sekhar has already merged this one to his v4.11/dt branch, so he
can apply it (or fold it in.)

Kevin
Sekhar Nori Feb. 14, 2017, 6:30 a.m. UTC | #4
On Tuesday 14 February 2017 02:31 AM, Kevin Hilman wrote:
> Kevin Hilman <khilman@baylibre.com> writes:
> 
>> Bartosz Golaszewski <bgolaszewski@baylibre.com> writes:
>>
>>> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
>>
>> I'll fold this one into the original since it's not yet merged.
> 
> Oops, Sekhar has already merged this one to his v4.11/dt branch, so he
> can apply it (or fold it in.)

Alright, I will apply this.

Bartosz, for future, please add a commit description for trivial patches
too. Even if its more or less just a rewording of subject line.

Thanks,
Sekhar
diff mbox

Patch

diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts
index c970b6e..94938a3 100644
--- a/arch/arm/boot/dts/da850-evm.dts
+++ b/arch/arm/boot/dts/da850-evm.dts
@@ -301,14 +301,14 @@ 
 	/* VPIF capture port */
 	port {
 		vpif_ch0: endpoint@0 {
-			  reg = <0>;
-			  bus-width = <8>;
+			reg = <0>;
+			bus-width = <8>;
 		};
 
 		vpif_ch1: endpoint@1 {
-			  reg = <1>;
-			  bus-width = <8>;
-			  data-shift = <8>;
+			reg = <1>;
+			bus-width = <8>;
+			data-shift = <8>;
 		};
 	};
 };