diff mbox

[2/2] drivers: pwm: pwm-atmel: add support to allow run time changing of pwm parameters

Message ID 1487839120-13650-3-git-send-email-claudiu.beznea@microchip.com (mailing list archive)
State New, archived
Headers show

Commit Message

Claudiu Beznea Feb. 23, 2017, 8:38 a.m. UTC
sama5d2 supports changing of pwm parameters like period and
duty factor without first to disable pwm. Since pwm code
is supported by more than one SoC add allow_runtime_cfg
parameter to atmel_pwm_chip data structure. This will be
filled statically for every SoC, saved in pwm specific
structure at probing time and checked while configuring
the device. Based on this, pwm clock will not be
enabled/disabled while configuring if it still enabled.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
---
 drivers/pwm/pwm-atmel.c | 24 ++++++++++++++++++------
 1 file changed, 18 insertions(+), 6 deletions(-)

Comments

Alexandre Belloni Feb. 23, 2017, 9:21 a.m. UTC | #1
On 23/02/2017 at 10:38:40 +0200, Claudiu Beznea wrote:
> sama5d2 supports changing of pwm parameters like period and
> duty factor without first to disable pwm. Since pwm code
> is supported by more than one SoC add allow_runtime_cfg
> parameter to atmel_pwm_chip data structure. This will be
> filled statically for every SoC, saved in pwm specific
> structure at probing time and checked while configuring
> the device. Based on this, pwm clock will not be
> enabled/disabled while configuring if it still enabled.
> 
> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
> ---
>  drivers/pwm/pwm-atmel.c | 24 ++++++++++++++++++------
>  1 file changed, 18 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/pwm/pwm-atmel.c b/drivers/pwm/pwm-atmel.c
> index 4406639..9e1dece 100644
> --- a/drivers/pwm/pwm-atmel.c
> +++ b/drivers/pwm/pwm-atmel.c
> @@ -68,6 +68,8 @@ struct atmel_pwm_chip {
>  
>  	void (*config)(struct pwm_chip *chip, struct pwm_device *pwm,
>  		       unsigned long dty, unsigned long prd);
> +
> +	bool allow_runtime_cfg;
>  };
>  
>  static inline struct atmel_pwm_chip *to_atmel_pwm_chip(struct pwm_chip *chip)
> @@ -114,7 +116,8 @@ static int atmel_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
>  	u32 val;
>  	int ret;
>  
> -	if (pwm_is_enabled(pwm) && (period_ns != pwm_get_period(pwm))) {
> +	if (!atmel_pwm->allow_runtime_cfg &&
> +	    pwm_is_enabled(pwm) && (period_ns != pwm_get_period(pwm))) {
>  		dev_err(chip->dev, "cannot change PWM period while enabled\n");
>  		return -EBUSY;
>  	}
> @@ -139,10 +142,12 @@ static int atmel_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
>  	do_div(div, period_ns);
>  	dty = prd - div;
>  
> -	ret = clk_enable(atmel_pwm->clk);
> -	if (ret) {
> -		dev_err(chip->dev, "failed to enable PWM clock\n");
> -		return ret;
> +	if (!pwm_is_enabled(pwm)) {
> +		ret = clk_enable(atmel_pwm->clk);
> +		if (ret) {
> +			dev_err(chip->dev, "failed to enable PWM clock\n");
> +			return ret;
> +		}
>  	}
>  

It is probably worth switching to atomic PWM instead of changing this
function. This would simplify the whole driver.

>  	/* It is necessary to preserve CPOL, inside CMR */
> @@ -155,7 +160,9 @@ static int atmel_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
>  	atmel_pwm->updated_pwms &= ~(1 << pwm->hwpwm);
>  	mutex_unlock(&atmel_pwm->isr_lock);
>  
> -	clk_disable(atmel_pwm->clk);
> +	if (!pwm_is_enabled(pwm))
> +		clk_disable(atmel_pwm->clk);
> +
>  	return ret;
>  }
>  
> @@ -294,18 +301,22 @@ static const struct pwm_ops atmel_pwm_ops = {
>  struct atmel_pwm_data {
>  	void (*config)(struct pwm_chip *chip, struct pwm_device *pwm,
>  		       unsigned long dty, unsigned long prd);
> +	bool allow_runtime_cfg;
>  };
>  
>  static const struct atmel_pwm_data atmel_pwm_data_v1 = {
>  	.config = atmel_pwm_config_v1,
> +	.allow_runtime_cfg = false,

This is useless as it is false even if not explicitly set.

>  };
>  
>  static const struct atmel_pwm_data atmel_pwm_data_v2 = {
>  	.config = atmel_pwm_config_v2,
> +	.allow_runtime_cfg = false,

ditto.

>  };
>  
>  static const struct atmel_pwm_data atmel_pwm_data_v3 = {
>  	.config = atmel_pwm_config_v3,
> +	.allow_runtime_cfg = true,
>  };
>  
>  static const struct platform_device_id atmel_pwm_devtypes[] = {
> @@ -399,6 +410,7 @@ static int atmel_pwm_probe(struct platform_device *pdev)
>  	atmel_pwm->chip.npwm = 4;
>  	atmel_pwm->chip.can_sleep = true;
>  	atmel_pwm->config = data->config;
> +	atmel_pwm->allow_runtime_cfg = data->allow_runtime_cfg;

It is probably worth having a pointer to the atmel_pwm_data instead of
having to copy all the members.

>  	atmel_pwm->updated_pwms = 0;
>  	mutex_init(&atmel_pwm->isr_lock);
>  
> -- 
> 2.7.4
>
Claudiu Beznea Feb. 23, 2017, 10:25 a.m. UTC | #2
Hi,


On 23.02.2017 11:21, Alexandre Belloni wrote:
> On 23/02/2017 at 10:38:40 +0200, Claudiu Beznea wrote:
>> sama5d2 supports changing of pwm parameters like period and
>> duty factor without first to disable pwm. Since pwm code
>> is supported by more than one SoC add allow_runtime_cfg
>> parameter to atmel_pwm_chip data structure. This will be
>> filled statically for every SoC, saved in pwm specific
>> structure at probing time and checked while configuring
>> the device. Based on this, pwm clock will not be
>> enabled/disabled while configuring if it still enabled.
>>
>> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
>> ---
>>  drivers/pwm/pwm-atmel.c | 24 ++++++++++++++++++------
>>  1 file changed, 18 insertions(+), 6 deletions(-)
>>
>> diff --git a/drivers/pwm/pwm-atmel.c b/drivers/pwm/pwm-atmel.c
>> index 4406639..9e1dece 100644
>> --- a/drivers/pwm/pwm-atmel.c
>> +++ b/drivers/pwm/pwm-atmel.c
>> @@ -68,6 +68,8 @@ struct atmel_pwm_chip {
>>  
>>  	void (*config)(struct pwm_chip *chip, struct pwm_device *pwm,
>>  		       unsigned long dty, unsigned long prd);
>> +
>> +	bool allow_runtime_cfg;
>>  };
>>  
>>  static inline struct atmel_pwm_chip *to_atmel_pwm_chip(struct pwm_chip *chip)
>> @@ -114,7 +116,8 @@ static int atmel_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
>>  	u32 val;
>>  	int ret;
>>  
>> -	if (pwm_is_enabled(pwm) && (period_ns != pwm_get_period(pwm))) {
>> +	if (!atmel_pwm->allow_runtime_cfg &&
>> +	    pwm_is_enabled(pwm) && (period_ns != pwm_get_period(pwm))) {
>>  		dev_err(chip->dev, "cannot change PWM period while enabled\n");
>>  		return -EBUSY;
>>  	}
>> @@ -139,10 +142,12 @@ static int atmel_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
>>  	do_div(div, period_ns);
>>  	dty = prd - div;
>>  
>> -	ret = clk_enable(atmel_pwm->clk);
>> -	if (ret) {
>> -		dev_err(chip->dev, "failed to enable PWM clock\n");
>> -		return ret;
>> +	if (!pwm_is_enabled(pwm)) {
>> +		ret = clk_enable(atmel_pwm->clk);
>> +		if (ret) {
>> +			dev_err(chip->dev, "failed to enable PWM clock\n");
>> +			return ret;
>> +		}
>>  	}
>>  
> It is probably worth switching to atomic PWM instead of changing this
> function. This would simplify the whole driver.
I was thinking to switch to atomic PWM in a future patch.
>
>>  	/* It is necessary to preserve CPOL, inside CMR */
>> @@ -155,7 +160,9 @@ static int atmel_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
>>  	atmel_pwm->updated_pwms &= ~(1 << pwm->hwpwm);
>>  	mutex_unlock(&atmel_pwm->isr_lock);
>>  
>> -	clk_disable(atmel_pwm->clk);
>> +	if (!pwm_is_enabled(pwm))
>> +		clk_disable(atmel_pwm->clk);
>> +
>>  	return ret;
>>  }
>>  
>> @@ -294,18 +301,22 @@ static const struct pwm_ops atmel_pwm_ops = {
>>  struct atmel_pwm_data {
>>  	void (*config)(struct pwm_chip *chip, struct pwm_device *pwm,
>>  		       unsigned long dty, unsigned long prd);
>> +	bool allow_runtime_cfg;
>>  };
>>  
>>  static const struct atmel_pwm_data atmel_pwm_data_v1 = {
>>  	.config = atmel_pwm_config_v1,
>> +	.allow_runtime_cfg = false,
> This is useless as it is false even if not explicitly set.
Ok. I will do it in v2.
>
>>  };
>>  
>>  static const struct atmel_pwm_data atmel_pwm_data_v2 = {
>>  	.config = atmel_pwm_config_v2,
>> +	.allow_runtime_cfg = false,
> ditto.
>
>>  };
>>  
>>  static const struct atmel_pwm_data atmel_pwm_data_v3 = {
>>  	.config = atmel_pwm_config_v3,
>> +	.allow_runtime_cfg = true,
>>  };
>>  
>>  static const struct platform_device_id atmel_pwm_devtypes[] = {
>> @@ -399,6 +410,7 @@ static int atmel_pwm_probe(struct platform_device *pdev)
>>  	atmel_pwm->chip.npwm = 4;
>>  	atmel_pwm->chip.can_sleep = true;
>>  	atmel_pwm->config = data->config;
>> +	atmel_pwm->allow_runtime_cfg = data->allow_runtime_cfg;
> It is probably worth having a pointer to the atmel_pwm_data instead of
> having to copy all the members.
Ok. I will do it in v2.
>
>>  	atmel_pwm->updated_pwms = 0;
>>  	mutex_init(&atmel_pwm->isr_lock);
>>  
>> -- 
>> 2.7.4
>>

Thank you,
Claudiu Beznea
Boris BREZILLON Feb. 23, 2017, 10:32 a.m. UTC | #3
Hi Claudiu,

On Thu, 23 Feb 2017 12:25:58 +0200
m18063 <Claudiu.Beznea@microchip.com> wrote:

> Hi,
> 
> 
> On 23.02.2017 11:21, Alexandre Belloni wrote:
> > On 23/02/2017 at 10:38:40 +0200, Claudiu Beznea wrote:  
> >> sama5d2 supports changing of pwm parameters like period and
> >> duty factor without first to disable pwm. Since pwm code
> >> is supported by more than one SoC add allow_runtime_cfg
> >> parameter to atmel_pwm_chip data structure. This will be
> >> filled statically for every SoC, saved in pwm specific
> >> structure at probing time and checked while configuring
> >> the device. Based on this, pwm clock will not be
> >> enabled/disabled while configuring if it still enabled.
> >>
> >> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
> >> ---
> >>  drivers/pwm/pwm-atmel.c | 24 ++++++++++++++++++------
> >>  1 file changed, 18 insertions(+), 6 deletions(-)
> >>
> >> diff --git a/drivers/pwm/pwm-atmel.c b/drivers/pwm/pwm-atmel.c
> >> index 4406639..9e1dece 100644
> >> --- a/drivers/pwm/pwm-atmel.c
> >> +++ b/drivers/pwm/pwm-atmel.c
> >> @@ -68,6 +68,8 @@ struct atmel_pwm_chip {
> >>  
> >>  	void (*config)(struct pwm_chip *chip, struct pwm_device *pwm,
> >>  		       unsigned long dty, unsigned long prd);
> >> +
> >> +	bool allow_runtime_cfg;
> >>  };
> >>  
> >>  static inline struct atmel_pwm_chip *to_atmel_pwm_chip(struct pwm_chip *chip)
> >> @@ -114,7 +116,8 @@ static int atmel_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
> >>  	u32 val;
> >>  	int ret;
> >>  
> >> -	if (pwm_is_enabled(pwm) && (period_ns != pwm_get_period(pwm))) {
> >> +	if (!atmel_pwm->allow_runtime_cfg &&
> >> +	    pwm_is_enabled(pwm) && (period_ns != pwm_get_period(pwm))) {
> >>  		dev_err(chip->dev, "cannot change PWM period while enabled\n");
> >>  		return -EBUSY;
> >>  	}
> >> @@ -139,10 +142,12 @@ static int atmel_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
> >>  	do_div(div, period_ns);
> >>  	dty = prd - div;
> >>  
> >> -	ret = clk_enable(atmel_pwm->clk);
> >> -	if (ret) {
> >> -		dev_err(chip->dev, "failed to enable PWM clock\n");
> >> -		return ret;
> >> +	if (!pwm_is_enabled(pwm)) {
> >> +		ret = clk_enable(atmel_pwm->clk);
> >> +		if (ret) {
> >> +			dev_err(chip->dev, "failed to enable PWM clock\n");
> >> +			return ret;
> >> +		}
> >>  	}
> >>    
> > It is probably worth switching to atomic PWM instead of changing this
> > function. This would simplify the whole driver.  
> I was thinking to switch to atomic PWM in a future patch.

Actually, I think it's better to do it before adding support for the
new IP (even before patch 1), but maybe I'm the only one to think
so :-).

Note that switching to the atomic API is not a big (actually, it should
even simplify the code).

Regards,

Boris
Alexandre Belloni Feb. 23, 2017, 10:32 a.m. UTC | #4
On 23/02/2017 at 12:25:58 +0200, m18063 wrote:
> > It is probably worth switching to atomic PWM instead of changing this
> > function. This would simplify the whole driver.
> I was thinking to switch to atomic PWM in a future patch.

Then why wait ?
Claudiu Beznea Feb. 23, 2017, 3:22 p.m. UTC | #5
On 23.02.2017 12:32, Alexandre Belloni wrote:
> On 23/02/2017 at 12:25:58 +0200, m18063 wrote:
>>> It is probably worth switching to atomic PWM instead of changing this
>>> function. This would simplify the whole driver.
>> I was thinking to switch to atomic PWM in a future patch.
> Then why wait ?
>
>
I wanted to do it in progressively:
- enable the support for SAMA5d2
- make it work based on what is currently implemented
- add atomic PWM support.

Anyway, please ignore this patch. I will do it in atomic
PWM way.

Thank you,
Claudiu
diff mbox

Patch

diff --git a/drivers/pwm/pwm-atmel.c b/drivers/pwm/pwm-atmel.c
index 4406639..9e1dece 100644
--- a/drivers/pwm/pwm-atmel.c
+++ b/drivers/pwm/pwm-atmel.c
@@ -68,6 +68,8 @@  struct atmel_pwm_chip {
 
 	void (*config)(struct pwm_chip *chip, struct pwm_device *pwm,
 		       unsigned long dty, unsigned long prd);
+
+	bool allow_runtime_cfg;
 };
 
 static inline struct atmel_pwm_chip *to_atmel_pwm_chip(struct pwm_chip *chip)
@@ -114,7 +116,8 @@  static int atmel_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
 	u32 val;
 	int ret;
 
-	if (pwm_is_enabled(pwm) && (period_ns != pwm_get_period(pwm))) {
+	if (!atmel_pwm->allow_runtime_cfg &&
+	    pwm_is_enabled(pwm) && (period_ns != pwm_get_period(pwm))) {
 		dev_err(chip->dev, "cannot change PWM period while enabled\n");
 		return -EBUSY;
 	}
@@ -139,10 +142,12 @@  static int atmel_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
 	do_div(div, period_ns);
 	dty = prd - div;
 
-	ret = clk_enable(atmel_pwm->clk);
-	if (ret) {
-		dev_err(chip->dev, "failed to enable PWM clock\n");
-		return ret;
+	if (!pwm_is_enabled(pwm)) {
+		ret = clk_enable(atmel_pwm->clk);
+		if (ret) {
+			dev_err(chip->dev, "failed to enable PWM clock\n");
+			return ret;
+		}
 	}
 
 	/* It is necessary to preserve CPOL, inside CMR */
@@ -155,7 +160,9 @@  static int atmel_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
 	atmel_pwm->updated_pwms &= ~(1 << pwm->hwpwm);
 	mutex_unlock(&atmel_pwm->isr_lock);
 
-	clk_disable(atmel_pwm->clk);
+	if (!pwm_is_enabled(pwm))
+		clk_disable(atmel_pwm->clk);
+
 	return ret;
 }
 
@@ -294,18 +301,22 @@  static const struct pwm_ops atmel_pwm_ops = {
 struct atmel_pwm_data {
 	void (*config)(struct pwm_chip *chip, struct pwm_device *pwm,
 		       unsigned long dty, unsigned long prd);
+	bool allow_runtime_cfg;
 };
 
 static const struct atmel_pwm_data atmel_pwm_data_v1 = {
 	.config = atmel_pwm_config_v1,
+	.allow_runtime_cfg = false,
 };
 
 static const struct atmel_pwm_data atmel_pwm_data_v2 = {
 	.config = atmel_pwm_config_v2,
+	.allow_runtime_cfg = false,
 };
 
 static const struct atmel_pwm_data atmel_pwm_data_v3 = {
 	.config = atmel_pwm_config_v3,
+	.allow_runtime_cfg = true,
 };
 
 static const struct platform_device_id atmel_pwm_devtypes[] = {
@@ -399,6 +410,7 @@  static int atmel_pwm_probe(struct platform_device *pdev)
 	atmel_pwm->chip.npwm = 4;
 	atmel_pwm->chip.can_sleep = true;
 	atmel_pwm->config = data->config;
+	atmel_pwm->allow_runtime_cfg = data->allow_runtime_cfg;
 	atmel_pwm->updated_pwms = 0;
 	mutex_init(&atmel_pwm->isr_lock);