[v5,02/11] dt-bindings: hisi: Add Hisilicon HiP05/06/07 Djtag dts bindings

Commit Message

Anurup M March 2, 2017, 10:48 a.m. UTC

From: Tan Xiaojun <[e-mail]>

Add Hisilicon HiP05/06/07 Djtag dts bindings for CPU and IO Die

Signed-off-by: Tan Xiaojun <[e-mail]>
Signed-off-by: Anurup M <[e-mail]>
---
 .../devicetree/bindings/arm/hisilicon/djtag.txt    | 51 ++++++++++++++++++++++
 1 file changed, 51 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/arm/hisilicon/djtag.txt

Comments

Rob Herring (Arm) March 3, 2017, 6:50 a.m. UTC | #1

On Thu, Mar 02, 2017 at 05:48:36AM -0500, Anurup M wrote:
> From: Tan Xiaojun <[e-mail]>
> 
> Add Hisilicon HiP05/06/07 Djtag dts bindings for CPU and IO Die
> 
> Signed-off-by: Tan Xiaojun <[e-mail]>
> Signed-off-by: Anurup M <[e-mail]>
> ---
>  .../devicetree/bindings/arm/hisilicon/djtag.txt    | 51 ++++++++++++++++++++++
>  1 file changed, 51 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/arm/hisilicon/djtag.txt

Please add acks when posting new versions.

Rob

Anurup M March 3, 2017, 9:48 a.m. UTC | #2

On Friday 03 March 2017 12:20 PM, Rob Herring wrote:
> On Thu, Mar 02, 2017 at 05:48:36AM -0500, Anurup M wrote:
>> From: Tan Xiaojun <[e-mail]>
>>
>> Add Hisilicon HiP05/06/07 Djtag dts bindings for CPU and IO Die
>>
>> Signed-off-by: Tan Xiaojun <[e-mail]>
>> Signed-off-by: Anurup M <[e-mail]>
>> ---
>>   .../devicetree/bindings/arm/hisilicon/djtag.txt    | 51 ++++++++++++++++++++++
>>   1 file changed, 51 insertions(+)
>>   create mode 100644 Documentation/devicetree/bindings/arm/hisilicon/djtag.txt
> Please add acks when posting new versions.

There was a correction in the example in 02/11 and also 03/11 for 
removal of IRQ of MN PMU.
So I did not add the acks. I shall make sure to add them in newer versions.

Thanks,
Anurup

> Rob

Patch

diff --git a/Documentation/devicetree/bindings/arm/hisilicon/djtag.txt b/Documentation/devicetree/bindings/arm/hisilicon/djtag.txt
new file mode 100644
index 0000000..fde5bab
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/hisilicon/djtag.txt
@@ -0,0 +1,51 @@ 
+The Hisilicon Djtag is an independent component which connects with some other
+components in the SoC by Debug Bus. The djtag is available in CPU and IO dies
+in the chip. The djtag controls access to connecting modules of CPU and IO
+dies.
+The various connecting components in CPU die (like L3 cache, L3 cache PMU etc.)
+are accessed by djtag during real time debugging. In IO die there are connecting
+components like RSA. These components appear as devices attached to djtag bus.
+
+Hisilicon HiP05/06/07 djtag for CPU die
+Required properties:
+  - compatible : The value should be as follows
+	(a) "hisilicon,hip05-cpu-djtag-v1" for CPU die which use v1 hw in
+	    HiP05 chipset.
+	(b) "hisilicon,hip06-cpu-djtag-v1" for CPU die which use v1 hw in
+	    HiP06 chipset.
+	(c) "hisilicon,hip07-cpu-djtag-v2" for CPU die which use v2 hw in
+	    HiP07 chipset.
+  - reg : Register address and size
+  - hisilicon,scl-id : The Super Cluster ID for CPU or IO die
+
+Example 1: Djtag for CPU die in HiP07
+
+	/* for Hisilicon HiP07 djtag for CPU Die */
+	djtag0: djtag@60010000 {
+		compatible = "hisilicon,hip07-cpu-djtag-v2";
+		reg = <0x0 0x60010000 0x0 0x10000>;
+		hisilicon,scl-id = <0x03>;
+
+		/* All connecting components will appear as child nodes */
+	};
+
+Hisilicon HiP05/06/07 djtag for IO die
+Required properties:
+  - compatible : The value should be as follows
+	(a) "hisilicon,hip05-io-djtag-v1" for IO die which use v1 hw in
+	    HiP05 chipset.
+	(c) "hisilicon,hip06-io-djtag-v2" for IO die which use v2 hw in
+	    HiP06 chipset.
+	(d) "hisilicon,hip07-io-djtag-v2" for IO die which use v2 hw in
+	    HiP07 chipset
+
+Example 2: Djtag for IO die in HiP05
+
+	/* for Hisilicon HiP05 djtag for IO Die */
+	djtag1: djtag@d0000000 {
+		compatible = "hisilicon,hip05-io-djtag-v1";
+		reg = <0x0 0xd0000000 0x0 0x10000>;
+		hisilicon,scl-id = <0x0>;
+
+		/* All connecting components will appear as child nodes */
+	};