diff mbox

arm64: dts: NS2: convert "ok" to "okay"

Message ID 1488817744-7844-1-git-send-email-jon.mason@broadcom.com (mailing list archive)
State New, archived
Headers show

Commit Message

Jon Mason March 6, 2017, 4:29 p.m. UTC 
Per e-mail from Sergei Shtylyov, the DT spec dictates it should be
"okay" (although "ok" is also recognized).  Thus, changing all "ok" to
"okay" in NS2 device tree files

Suggested-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Jon Mason <jon.mason@broadcom.com>
---
 arch/arm64/boot/dts/broadcom/ns2-svk.dts | 38 ++++++++++++++++----------------
 arch/arm64/boot/dts/broadcom/ns2-xmc.dts | 20 ++++++++---------
 2 files changed, 29 insertions(+), 29 deletions(-)

Comments

Florian Fainelli March 15, 2017, 9:54 p.m. UTC | #1 
On Mon, 6 Mar 2017 11:29:04 -0500, Jon Mason <jon.mason@broadcom.com> wrote:
> Per e-mail from Sergei Shtylyov, the DT spec dictates it should be
> "okay" (although "ok" is also recognized). Thus, changing all "ok" to
> "okay" in NS2 device tree files
>
> Suggested-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
> Signed-off-by: Jon Mason <jon.mason@broadcom.com>
> ---

Applied, thanks!
--
Florian
diff mbox

Patch

diff --git a/arch/arm64/boot/dts/broadcom/ns2-svk.dts b/arch/arm64/boot/dts/broadcom/ns2-svk.dts
index 5ae0816..ec19fbf 100644
--- a/arch/arm64/boot/dts/broadcom/ns2-svk.dts
+++ b/arch/arm64/boot/dts/broadcom/ns2-svk.dts
@@ -57,55 +57,55 @@ 
 };
 
 &enet {
-	status = "ok";
+	status = "okay";
 };
 
 &pci_phy0 {
-	status = "ok";
+	status = "okay";
 };
 
 &pci_phy1 {
-	status = "ok";
+	status = "okay";
 };
 
 &pcie0 {
-	status = "ok";
+	status = "okay";
 };
 
 &pcie4 {
-	status = "ok";
+	status = "okay";
 };
 
 &pcie8 {
-	status = "ok";
+	status = "okay";
 };
 
 &i2c0 {
-	status = "ok";
+	status = "okay";
 };
 
 &i2c1 {
-	status = "ok";
+	status = "okay";
 };
 
 &uart0 {
-	status = "ok";
+	status = "okay";
 };
 
 &uart1 {
-	status = "ok";
+	status = "okay";
 };
 
 &uart2 {
-	status = "ok";
+	status = "okay";
 };
 
 &uart3 {
-	status = "ok";
+	status = "okay";
 };
 
 &ssp0 {
-	status = "ok";
+	status = "okay";
 
 	slic@0 {
 		compatible = "silabs,si3226x";
@@ -126,7 +126,7 @@ 
 };
 
 &ssp1 {
-	status = "ok";
+	status = "okay";
 
 	at25@0 {
 		compatible = "atmel,at25";
@@ -150,23 +150,23 @@ 
 };
 
 &sata_phy0 {
-	status = "ok";
+	status = "okay";
 };
 
 &sata_phy1 {
-	status = "ok";
+	status = "okay";
 };
 
 &sata {
-	status = "ok";
+	status = "okay";
 };
 
 &sdio0 {
-	status = "ok";
+	status = "okay";
 };
 
 &sdio1 {
-	status = "ok";
+	status = "okay";
 };
 
 &nand {
diff --git a/arch/arm64/boot/dts/broadcom/ns2-xmc.dts b/arch/arm64/boot/dts/broadcom/ns2-xmc.dts
index 99a2723..ab4ae1a 100644
--- a/arch/arm64/boot/dts/broadcom/ns2-xmc.dts
+++ b/arch/arm64/boot/dts/broadcom/ns2-xmc.dts
@@ -54,15 +54,15 @@ 
 };
 
 &enet {
-	status = "ok";
+	status = "okay";
 };
 
 &i2c0 {
-	status = "ok";
+	status = "okay";
 };
 
 &i2c1 {
-	status = "ok";
+	status = "okay";
 };
 
 &mdio_mux_iproc {
@@ -122,27 +122,27 @@ 
 };
 
 &pci_phy0 {
-	status = "ok";
+	status = "okay";
 };
 
 &pcie0 {
-	status = "ok";
+	status = "okay";
 };
 
 &pcie8 {
-	status = "ok";
+	status = "okay";
 };
 
 &sata_phy0 {
-	status = "ok";
+	status = "okay";
 };
 
 &sata_phy1 {
-	status = "ok";
+	status = "okay";
 };
 
 &sata {
-	status = "ok";
+	status = "okay";
 };
 
 &qspi {
@@ -187,5 +187,5 @@ 
 };
 
 &uart3 {
-	status = "ok";
+	status = "okay";
 };