| Message ID | 1489484897-14933-6-git-send-email-jagan@openedev.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Tue, Mar 14, 2017 at 03:18:14PM +0530, Jagan Teki wrote: > From: Jagan Teki <jagan@amarulasolutions.com> > > Add missing documentation of max11801-ts dt-binding details. > > Cc: Mark Rutland <mark.rutland@arm.com> > Cc: Rob Herring <robh+dt@kernel.org> > Cc: Shawn Guo <shawnguo@kernel.org> > Cc: Michael Trimarchi <michael@amarulasolutions.com> > Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> > --- > Changes for v5: > - Newly added patch > > .../bindings/input/touchscreen/max11801-ts.txt | 18 ++++++++++++++++++ > 1 file changed, 18 insertions(+) > create mode 100644 Documentation/devicetree/bindings/input/touchscreen/max11801-ts.txt > > diff --git a/Documentation/devicetree/bindings/input/touchscreen/max11801-ts.txt b/Documentation/devicetree/bindings/input/touchscreen/max11801-ts.txt > new file mode 100644 > index 0000000..b6ac452 > --- /dev/null > +++ b/Documentation/devicetree/bindings/input/touchscreen/max11801-ts.txt > @@ -0,0 +1,18 @@ > +* MAXI MAX11801 Resistive touch screen controller with i2c interface > + > +Required properties: > +- compatible: must be "max11801" > +- reg: i2c slave address > +- interrupt-parent: the phandle for the interrupt controller > +- interrupts: touch controller interrupt > + > +Example: > + > +&i2c1 { > + ts: max11801@48 { Node name should be generic while label can be specific. That said, the following form might be better choice. max11801: touchscreen@48 { Shawn > + compatible = "max11801"; > + reg = <0x48>; > + interrupt-parent = <&gpio3>; > + interrupts = <31 2>; > + }; > +}; > -- > 1.9.1 >
diff --git a/Documentation/devicetree/bindings/input/touchscreen/max11801-ts.txt b/Documentation/devicetree/bindings/input/touchscreen/max11801-ts.txt new file mode 100644 index 0000000..b6ac452 --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/max11801-ts.txt @@ -0,0 +1,18 @@ +* MAXI MAX11801 Resistive touch screen controller with i2c interface + +Required properties: +- compatible: must be "max11801" +- reg: i2c slave address +- interrupt-parent: the phandle for the interrupt controller +- interrupts: touch controller interrupt + +Example: + +&i2c1 { + ts: max11801@48 { + compatible = "max11801"; + reg = <0x48>; + interrupt-parent = <&gpio3>; + interrupts = <31 2>; + }; +};