diff mbox

[v3] arm64: dts: ls1012a: add thermal monitor node

Message ID 1489561825-42670-1-git-send-email-andy.tang@nxp.com (mailing list archive)
State New, archived
Headers show

Commit Message

Andy Tang March 15, 2017, 7:10 a.m. UTC
There is a thermal monitoring unit on ls1012a soc which can
monitor and record the temperature of cores so that appropriate actions
can be taken or alarm the user when the temperature exceeds a programmed
temperature threshold.

Signed-off-by: Tang Yuantian <andy.tang@nxp.com>
---
v3:
	-- fix alignment and format issue
v2:
	-- rebase to latest kernel
 arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi | 76 ++++++++++++++++++++++++++
 1 file changed, 76 insertions(+)

Comments

Shawn Guo March 16, 2017, 3:10 a.m. UTC | #1
On Wed, Mar 15, 2017 at 03:10:25PM +0800, Yuantian Tang wrote:
> There is a thermal monitoring unit on ls1012a soc which can
> monitor and record the temperature of cores so that appropriate actions
> can be taken or alarm the user when the temperature exceeds a programmed
> temperature threshold.
> 
> Signed-off-by: Tang Yuantian <andy.tang@nxp.com>
> ---
> v3:
> 	-- fix alignment and format issue
> v2:
> 	-- rebase to latest kernel
>  arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi | 76 ++++++++++++++++++++++++++
>  1 file changed, 76 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
> index cffebb4..2cceefd 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
> @@ -43,6 +43,7 @@
>   */
>  
>  #include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/thermal/thermal.h>
>  
>  / {
>  	compatible = "fsl,ls1012a";
> @@ -127,6 +128,81 @@
>  			clocks = <&sysclk>;
>  		};
>  
> +		tmu: tmu@1f00000 {
> +			compatible = "fsl,qoriq-tmu";
> +			reg = <0x0 0x1f00000 0x0 0x10000>;
> +			interrupts = <0 33 0x4>;
> +			fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x30062>;
> +			fsl,tmu-calibration = <0x00000000 0x00000026
> +					       0x00000001 0x0000002d
> +					       0x00000002 0x00000032
> +					       0x00000003 0x00000039
> +					       0x00000004 0x0000003f
> +					       0x00000005 0x00000046
> +					       0x00000006 0x0000004d
> +					       0x00000007 0x00000054
> +					       0x00000008 0x0000005a
> +					       0x00000009 0x00000061
> +					       0x0000000a 0x0000006a
> +					       0x0000000b 0x00000071
> +
> +					       0x00010000 0x00000025
> +					       0x00010001 0x0000002c
> +					       0x00010002 0x00000035
> +					       0x00010003 0x0000003d
> +					       0x00010004 0x00000045
> +					       0x00010005 0x0000004e
> +					       0x00010006 0x00000057
> +					       0x00010007 0x00000061
> +					       0x00010008 0x0000006b
> +					       0x00010009 0x00000076
> +
> +					       0x00020000 0x00000029
> +					       0x00020001 0x00000033
> +					       0x00020002 0x0000003d
> +					       0x00020003 0x00000049
> +					       0x00020004 0x00000056
> +					       0x00020005 0x00000061
> +					       0x00020006 0x0000006d
> +
> +					       0x00030000 0x00000021
> +					       0x00030001 0x0000002a
> +					       0x00030002 0x0000003c
> +					       0x00030003 0x0000004e>;
> +			big-endian;
> +			#thermal-sensor-cells = <1>;
> +		};
> +
> +		thermal-zones {
> +			cpu_thermal: cpu-thermal {
> +				polling-delay-passive = <1000>;
> +				polling-delay = <5000>;
> +				thermal-sensors = <&tmu 0>;

Please remember to have a newline between property list and child node.
I fixed it up and applied the patch.

Shawn

> +				trips {
> +					cpu_alert: cpu-alert {
> +						temperature = <85000>;
> +						hysteresis = <2000>;
> +						type = "passive";
> +					};
> +
> +					cpu_crit: cpu-crit {
> +						temperature = <95000>;
> +						hysteresis = <2000>;
> +						type = "critical";
> +					};
> +				};
> +
> +				cooling-maps {
> +					map0 {
> +						trip = <&cpu_alert>;
> +						cooling-device =
> +							<&cpu0 THERMAL_NO_LIMIT
> +							THERMAL_NO_LIMIT>;
> +					};
> +				};
> +			};
> +		};
> +
>  		i2c0: i2c@2180000 {
>  			compatible = "fsl,vf610-i2c";
>  			#address-cells = <1>;
> -- 
> 2.1.0.27.g96db324
>
Andy Tang March 16, 2017, 3:13 a.m. UTC | #2
Hi,

> -----Original Message-----
> From: Shawn Guo [mailto:shawnguo@kernel.org]
> Sent: Thursday, March 16, 2017 11:11 AM
> To: Andy Tang
> Cc: robh+dt@kernel.org; mark.rutland@arm.com; catalin.marinas@arm.com;
> will.deacon@arm.com; devicetree@vger.kernel.org; linux-arm-
> kernel@lists.infradead.org
> Subject: Re: [PATCH v3] arm64: dts: ls1012a: add thermal monitor node
> 
> On Wed, Mar 15, 2017 at 03:10:25PM +0800, Yuantian Tang wrote:
> > There is a thermal monitoring unit on ls1012a soc which can monitor
> > and record the temperature of cores so that appropriate actions can be
> > taken or alarm the user when the temperature exceeds a programmed
> > temperature threshold.
> >
> > Signed-off-by: Tang Yuantian <andy.tang@nxp.com>
> > ---
> > v3:
> > 	-- fix alignment and format issue
> > v2:
> > 	-- rebase to latest kernel
> >  arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi | 76
> > ++++++++++++++++++++++++++
> >  1 file changed, 76 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
> > b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
> > index cffebb4..2cceefd 100644
> > --- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
> > +++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
> > @@ -43,6 +43,7 @@
> >   */
> >
> >  #include <dt-bindings/interrupt-controller/irq.h>
> > +#include <dt-bindings/thermal/thermal.h>
> >
> >  / {
> >  	compatible = "fsl,ls1012a";
> > @@ -127,6 +128,81 @@
> >  			clocks = <&sysclk>;
> >  		};
> >
> > +		tmu: tmu@1f00000 {
> > +			compatible = "fsl,qoriq-tmu";
> > +			reg = <0x0 0x1f00000 0x0 0x10000>;
> > +			interrupts = <0 33 0x4>;
> > +			fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x30062>;
> > +			fsl,tmu-calibration = <0x00000000 0x00000026
> > +					       0x00000001 0x0000002d
> > +					       0x00000002 0x00000032
> > +					       0x00000003 0x00000039
> > +					       0x00000004 0x0000003f
> > +					       0x00000005 0x00000046
> > +					       0x00000006 0x0000004d
> > +					       0x00000007 0x00000054
> > +					       0x00000008 0x0000005a
> > +					       0x00000009 0x00000061
> > +					       0x0000000a 0x0000006a
> > +					       0x0000000b 0x00000071
> > +
> > +					       0x00010000 0x00000025
> > +					       0x00010001 0x0000002c
> > +					       0x00010002 0x00000035
> > +					       0x00010003 0x0000003d
> > +					       0x00010004 0x00000045
> > +					       0x00010005 0x0000004e
> > +					       0x00010006 0x00000057
> > +					       0x00010007 0x00000061
> > +					       0x00010008 0x0000006b
> > +					       0x00010009 0x00000076
> > +
> > +					       0x00020000 0x00000029
> > +					       0x00020001 0x00000033
> > +					       0x00020002 0x0000003d
> > +					       0x00020003 0x00000049
> > +					       0x00020004 0x00000056
> > +					       0x00020005 0x00000061
> > +					       0x00020006 0x0000006d
> > +
> > +					       0x00030000 0x00000021
> > +					       0x00030001 0x0000002a
> > +					       0x00030002 0x0000003c
> > +					       0x00030003 0x0000004e>;
> > +			big-endian;
> > +			#thermal-sensor-cells = <1>;
> > +		};
> > +
> > +		thermal-zones {
> > +			cpu_thermal: cpu-thermal {
> > +				polling-delay-passive = <1000>;
> > +				polling-delay = <5000>;
> > +				thermal-sensors = <&tmu 0>;
> 
> Please remember to have a newline between property list and child node.
> I fixed it up and applied the patch.
> 
Thanks, Shawn. I will keep it in mind.

Regards,
Andy

> Shawn
> 
> > +				trips {
> > +					cpu_alert: cpu-alert {
> > +						temperature = <85000>;
> > +						hysteresis = <2000>;
> > +						type = "passive";
> > +					};
> > +
> > +					cpu_crit: cpu-crit {
> > +						temperature = <95000>;
> > +						hysteresis = <2000>;
> > +						type = "critical";
> > +					};
> > +				};
> > +
> > +				cooling-maps {
> > +					map0 {
> > +						trip = <&cpu_alert>;
> > +						cooling-device =
> > +							<&cpu0
> THERMAL_NO_LIMIT
> > +
> 	THERMAL_NO_LIMIT>;
> > +					};
> > +				};
> > +			};
> > +		};
> > +
> >  		i2c0: i2c@2180000 {
> >  			compatible = "fsl,vf610-i2c";
> >  			#address-cells = <1>;
> > --
> > 2.1.0.27.g96db324
> >
diff mbox

Patch

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
index cffebb4..2cceefd 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
@@ -43,6 +43,7 @@ 
  */
 
 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/thermal/thermal.h>
 
 / {
 	compatible = "fsl,ls1012a";
@@ -127,6 +128,81 @@ 
 			clocks = <&sysclk>;
 		};
 
+		tmu: tmu@1f00000 {
+			compatible = "fsl,qoriq-tmu";
+			reg = <0x0 0x1f00000 0x0 0x10000>;
+			interrupts = <0 33 0x4>;
+			fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x30062>;
+			fsl,tmu-calibration = <0x00000000 0x00000026
+					       0x00000001 0x0000002d
+					       0x00000002 0x00000032
+					       0x00000003 0x00000039
+					       0x00000004 0x0000003f
+					       0x00000005 0x00000046
+					       0x00000006 0x0000004d
+					       0x00000007 0x00000054
+					       0x00000008 0x0000005a
+					       0x00000009 0x00000061
+					       0x0000000a 0x0000006a
+					       0x0000000b 0x00000071
+
+					       0x00010000 0x00000025
+					       0x00010001 0x0000002c
+					       0x00010002 0x00000035
+					       0x00010003 0x0000003d
+					       0x00010004 0x00000045
+					       0x00010005 0x0000004e
+					       0x00010006 0x00000057
+					       0x00010007 0x00000061
+					       0x00010008 0x0000006b
+					       0x00010009 0x00000076
+
+					       0x00020000 0x00000029
+					       0x00020001 0x00000033
+					       0x00020002 0x0000003d
+					       0x00020003 0x00000049
+					       0x00020004 0x00000056
+					       0x00020005 0x00000061
+					       0x00020006 0x0000006d
+
+					       0x00030000 0x00000021
+					       0x00030001 0x0000002a
+					       0x00030002 0x0000003c
+					       0x00030003 0x0000004e>;
+			big-endian;
+			#thermal-sensor-cells = <1>;
+		};
+
+		thermal-zones {
+			cpu_thermal: cpu-thermal {
+				polling-delay-passive = <1000>;
+				polling-delay = <5000>;
+				thermal-sensors = <&tmu 0>;
+				trips {
+					cpu_alert: cpu-alert {
+						temperature = <85000>;
+						hysteresis = <2000>;
+						type = "passive";
+					};
+
+					cpu_crit: cpu-crit {
+						temperature = <95000>;
+						hysteresis = <2000>;
+						type = "critical";
+					};
+				};
+
+				cooling-maps {
+					map0 {
+						trip = <&cpu_alert>;
+						cooling-device =
+							<&cpu0 THERMAL_NO_LIMIT
+							THERMAL_NO_LIMIT>;
+					};
+				};
+			};
+		};
+
 		i2c0: i2c@2180000 {
 			compatible = "fsl,vf610-i2c";
 			#address-cells = <1>;